When I type on my keyboard... the letter I type jump before... How to fix?
Just upgraded from Vista to Windows 7 and cleaned by the computer company computer.
Now the keyboard when I type emails will jump in every sense... especially toward the front.
I prefer to use the mouse wireless on my computer and watch the Center button.
It's driving me crazy because I type fast and now I have to go slowly.
Help please...
Click Start-> Control Panel-> mouse. This is where the controls are. There is probably a writeup in your Guide on this subject as well. On my Toshiba Satellite L755 is Fn + F9.
Good luck.
Tags: Windows
Similar Questions
-
I got this message when I installed the latest InDesign. Cannot open the application. Do you know how to fix it? "Cannot launch Adobe InDesign that you do not have sufficient permissions to access the preferences folders. Make sure that you have the appropriate permissions and then restart Adobe InDesign.
-
I understood the problem, but don't know how to fix it. It is said to run dxdiag because direct 3D, so i run dxdiag and it finishes loading, I test direct 3D and it works fine, so I re-run halo, but then it still doesn't work. so I went online for patches, but when I downloaded a patch for windows 7, but I have windows xp. so I go back to the internet and search for patches for windows xp, but there is no result. so I thought change to windowed mode halo would work but it dident work when I ran halo 3rd becose my color depth is low, I have 24-bit color quality, but I don't know how to change, so I look for a way to change this for months and no results.so to microsoft answers site please help me because I have nothing else in my mind to the difficulty of halo
I have:(1.halo of the trial(custom edition 2.halo (full)Halo is ever going to work on my computerbecause he never didI play with my cousins that I visit about 3 times a yearHello
I suggest you go through the link.
Minimum system requirements for Halo: Combat Evolved
http://support.Microsoft.com/kb/829479Please check if the computer meets the minimum system requirements to play HALO gameYou can also refer to: -
Recently my fireall cannot be activated? I tried manually put on throughout the service, no luck. Then, I checked the firewall authorization driver is absent, it is the cause of the problem that the firewall cannot be activated? How to fix?
Hi James,
Thank you for your e-mail. I solved the problem using System Restore.
-
Suddenly, my laptop keyboard types numbers - usually to the right of the letter 'y '. When I plug another keyboard, the keyboard to type the letters, but the laptop continues to type numbers.
I was antics and found the fix. Press Fn (function key) and press the Nr/UK. Don't know why it worked, but it did.
-
When I go to itunes store, the screen flickers never done before
When I'm going to iTunes Store, the screen flickers never done before I'm on windows 10
That's nice. You have a question?
-
Ideasms you have any problems with
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Hello
He's still trying to install? If so use the below, if not you can HIDE it from Windows Updates - right-click on LEATHER.
Then, you can download it from the Download Center and try to install it. Of course, be sure that you really need the
Update.MS Download Center
http://www.Microsoft.com/downloads/en/default.aspxI guess that part of the question could be a driver which is really old or similar should not be loaded.
This exit Windows updates on (after you have access) and stop the updates of the driver to load.
How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx---------------------------------------------------
You can use the solutions in this KB - 3 methods and I listed a little help for them below
The update is not installed successfully, you receive a message, and the computer restarts when you try to
install an update in Windows Vista
http://support.Microsoft.com/kb/949358Method 1: Start Windows Vista with the Windows installation media and use the repair feature
How to do a startup repair in Vista
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlYou can also do a safe mode startup repair to access the Recovery Options If you have them available
or use the DVD as described above.This tells you how to access the System Recovery Options
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxTry recovery options Startup Repair
How to do a startup repair
http://www.Vistax64.com/tutorials/91467-startup-repair.htmlMethod 2: Start the system in safe mode and then use the system restore feature
How to make a Vista system restore
http://www.Vistax64.com/tutorials/76905-System-Restore-how.htmlYou can also do a restore of the system of starting with a Vista disk.
Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)
See article below for that.
You can use this method on the updates that have this problem.
http://support.Microsoft.com/kb/949358Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
and install it.Microsoft Download Center
http://www.Microsoft.com/downloads/en/default.aspx------------------------------------------------------
Once you are in Windows I was running once again reset here as a precaution.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058Hope this helps sort it out for you.
Rob - bicycle - Mark Twain said it is good. -
Fonts in grey in the type palette Illustrator - how to fix this?
I had OS 10.9 and Illustrator worked without any problems. I've recently upgraded to OS 10.10 and I now experience grayed fonts in Illustrator Type window that I do not suffer in Photoshop. I have CS5.1 for Illustrator. If anyone has experienced this? If Yes, do you know how to fix it?
Cauldie,
If I (put) understand it, try this:
Open system preferences and go to accessibility. Then select display in the source on the left side list, then check the box transparency reduced.
It was introduced in this #15 post by TheUlser:
-
I had a conflict of interest in order to get rid of one of the display drivers.
Since then, the page is a not properly scroll. I had this happen in the past and that you do not remember how I fixed it.This help if you disable smooth scrolling?
Tools > Options > advanced > general: navigation: "Use smooth scrolling".
-
have a Comcast wireless connection. 2 laptop HP & Gateway, HP, leaving work wireless, must connect directly with a wire to the router, what happened? How to fix? Colleen
Hi ColleenMiller,
1. you receive messages or error codes when you connect?
2 Windows operating system you are using?
You can view the following items and see if it helps:
Windows wireless and wired network connection problems
Solve problems, find wireless networks
Hope this information is useful.
-
I have a Hp and the micro build does not work how to fix this?
Can someone help me please? I have a HP T5800 and the micro build does not work how can I solve this problem?
Hello
Check with HP, their drivers support and documentation online and ask in the forums about known issues.
Support HP & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/========
It's probably the pilots who are responsible and who may not really be later or they need to be
re-installed anyway. The best way is to manually review using the methods below.References to Vista also apply to Windows 7.
Control Panel - device - SOUNDS - look for HD Audio Manager - Mine said RealTek High
Audio definition (this is an example and you can have an other name/maker).Write the description and the model double click on it - tab drivers - write down
Version. Now click on update drivers who cannot do anything as MS is far behind certifying
drivers. Then CLICK RIGHT on it and UNINSTALL - REBOOT - this will rebuild the driver
stack.You can have the default windows or a former certified pilot and it's all or part of the
issue.Now, go to the site of the manufacturer of the system and get the latest Audio/Sound drivers - download - SAVE - go to
where you put - right-click on Reboot - RUN AS ADMIN-Check the Version tab of the driver in the Device Manager as the restoration of the sound card drivers often
and then install the latest version. Restart and check after each test, not
rare to have to run the pilot of 1 to 4 times or more. Just the version make sure you
installed shows upward on the tab of the driver.
Go to the site of the manufacturer of the device, and then search for the even more recent drivers and install repeat
operating mode. Download - SAVE - go to where you put them - click on - RUN AS
ADMIN - RebootLook at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (updated drivers manually using the methods above is)
to ensure that the latest drivers from the manufacturer of system and device manufacturers are are preferably)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html---------------------------------------------------------
After the updated driver.
Click with the right button on the speaker near clock - recorders - right click in the box - check see the
Disconnected devices and show disabled devices - check your micro - highlight
then on lower right properties. Make sure that the appropriate injector is selected and check
other parameters - levels tab make sure that MUTE is disabled and APPLY / OK to change.Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
is the RealTek Audio Manager, yours can be quite different name if you have one.How to activate Audio devices hidden in Vista
http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.htmlConnect one microphone, music player or other audio device to your computer
http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspxProblems with sound and audio or no sound - a Mr Fixit
http://support.Microsoft.com/GP/NO_SOUNDTips for solving common audio problems
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problemsThe volume of the audio recorded by sound recorder in Windows Vista or in Windows 7 is less than
in Windows XP (or Vista)
http://support.Microsoft.com/kb/973446I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
I can't get my updates. the Windows Installer does not work how to fix it
I can't get my updates. and I can not install other programs. the Windows Installer does not work. How can I fix?
http://support.Microsoft.com/kb/2438651#reso1
See the above article, I suggest you use not Fixit, but it's your choice.
For manually fixit it you follow the steps in the resolution.
fyip
-
mouse randomly does not meet the flow, ideas on why and how to fix it?
every now and then he does not meet the movement vertically or horizontally, its becomes quite annoying and had no idea why its happens or how to fix
Check that the light under the mouse has no dirt top card, as long as your mouse pad is clean.
Try the mouse in another USB port in order to verify that you are using is not defective.
Try a different mouse is you still have a problem after doing the above to check if the mouse is defective. -
I use Windows 7 Ultimate, with automatic updates. This just happened recently. I have not had this problem in the past. I recently had problems to install a wireless adapter, but the issue has been resolved. When I login, the password is recognized (apparently don't ignore the first key), but when you use an application, such as Google search, the first character is lost. If I press the first button, it works. This seems to be the same in any application. Thanks for any help you can provide.
Ron
Hi Ron,
1. What is the model number of the keyboard?
2. have you verified the functionality of keyboard on different computers?
I suggest you to check if the keyboard works well on different computers.
We can see the links and check if it helps.
Troubleshoot keyboard (Applies to Windows 7)
Troubleshoot wired keyboards that do not or only the erroneous characters category
Let us know the results. We will be happy to help you further.
-
The screen is just completely black, no response from any keys on the keyboard or click of the mouse.
The computer was working fine earlier in the day. But when I turned it on again this night here, this problem arises.
Help, please!
Hello
Method 1:
I suggest to unplug external devices such as printers, scanners, etc. which are connected to the system, then restart the system and check if the problem is resolved.
Method 2:
I suggest you follow the steps mentioned in the article below and check if the problem is resolved.
Windows XP logon screen does not appear and the computer continuously restarts
http://support.Microsoft.com/kb/310396
Apart from that, I suggest you follow the steps mentioned in the article below.
Computer stops responding with a black screen when you start Windows XP
http://support.Microsoft.com/kb/314503
Method 3:
If this does not help then, I suggest you do a system restore and check whether the problem is resolved. Follow the steps mentioned in the article below.
How do I recover from a corrupted registry that prevents Windows XP startup
http://support.Microsoft.com/kb/307545
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
IOS 10 reminders does not work correctly.
When a reminder appears in the lock screen, you used to be able to slide on to recognize. Now, you must go the extra step to see first. Then he may or may not give you the option recognize, set a reminder. If she can't give you options to recognize,
-
Error-50352 to DAQmx analog writing
Hello I get the following error message when you try to write data points about 20 million to a Council of PXI - 6713: Error-50352 occurred at DAQmx Write (Wfm Analog 1Chan NSamp) .vi:1 Possible reasons: The requested memory could not be allocated. T
-
I see a lot of posts here that address of wireless security, but I have a few questions that I can't find answers to. I apologize if I missed something. I'm running a wrt54g ver.2. I don't think that the firmware has already been upgraded (how do you
-
I have two independent 521AP and 526 controller. I would change my standalone mode controller 521AP. How can I get the controller IOS mode? I have an account of CCB, but that doesn't let me download the software. I have to buy new mode controller IOS
-
Application for blackBerry Smartphones pine
I actually have two problems, the first is when I try to send my friend a PIN request he doesn't recive and he says waiting, and if he tries to send me a didn't recive and he says also in waiting for someone could help with this and my second problem