When on Skype the other party sees my room mirrorwise
Hello
When you use Skype with camera, the other party sees me mirrorwise, so I wanted to fix it but couldn't get to the pn from the camera to my laptop.
hope you can help me with this
Wilma
Have you checked the video settings in Skype?
Tags: Windows
Similar Questions
-
When in Skype, I can hear the other party but they cannot hear me?
We both mutually see which is very good and they come loud and clear... but they don't heard me not at all.
Hi Gayle,
Thanks for posting your question in the microsoft community.
I understand that if you can hear the other party but they cannot hear you.
The question is limited to Skype?
I suggest that you contact the Skype support, that they would be better suited to help this issue. Check out the link and ask the question.
-
Not to hear the other party when calling for internet calls VoipDiscount
The other party cannot hear me when I make a call via Voip Discount.
Customer support Voip Discount support with their products, or check their web site for technical support information and troubleshooting.
-
Why am I called on my computer I hear the other party good, but they don't hear me
several times I try tocalled on my computer, but the other party is me does not, but I hear them well as call on Skype yahoo, rynga and so many other
Hi Bayo578,
1. If it works much earlier?
2. did you of recent changes on the system?
You will need to check the parameters of the webcam or chat program that you use.
You can also see the following articles for more information:
https://support.Skype.com/en/FAQ/FA897/why-can-t-the-other-person-hear-me
http://help.Yahoo.com/tutorials/Ms8/mess/im_callmanag2.html
Hope this information is useful.
-
Had a weird start this morning problem. If I dial a number, even on speaker, the Cliq says it connects, but I never hear ringing or anyone pick it up. It's complete volumes and the speaker.
I don't have a landline to see if it sounds or not, but I called one of my own numbers that sounds twice and going straight to voicemail, so I know that something is definitely wrong. I think I can hear static and the other party, but it is so low, that it is difficult to say. It's my only phone, so it's kind of a critical issue!
Troubleshooting tips, I can try?
I recently started using Shush! I really hope that is not the cause, because it is an essential application for me.
Thanks in advance!
OK, a reboot fixed it. I just had it redial a number well. EEK! Gremlins!
Anyone know why I might have had the problem?
Thank you
-
I do not hear, nor the other party can't hear me
Tey as the webcam VX-2000, for the first time and I was not able to listen, nor the other party was able to hear me, what I do I have to do?
Hello
I suggest you to download the software from this link and install:
http://www.Microsoft.com/hardware/en-us/d/LifeCam-VX-2000For installation problems, see this link:
http://www.Microsoft.com/hardware/LifeCam/en-us/default.mspxIt will be useful.
-
Auto power off when spread to the other monitor__
Hi Sir, Madam
I have a question about to extend the desktop on the other monitor. I use my mobile 2.00 GHZ (RAM) 2,00 GB and OS 32 bit and I extend to the other my monitor, but when I play Age of Empires 3, he automatically stop and show this kind of error above can, Mr President, Madam helps sort or know what happened really. I currently use the fujitsu, S7111 model. Hoping to hear from you soon.
This is the error:
Signature of the problem:
Problem event name: BlueScreen
OS version: 6.0.6002.2.2.0.256.6
Locale ID: 18441
More information about the problem:
BCCode: 116
BCP1: 84A 19510
BCP2: 8BC0ECB0
BCP3: 00000000
BCP4: 0000000D
OS version: 6_0_6002
Service Pack: 2_0
Product: 256_1
Files helping to describe the problem:
C:\Windows\Minidump\Mini030110-08.dmp
C:\Users\Jun Kit\AppData\Local\Temp\WER-44678-0.sysdata.xml
C:\Users\Jun Kit\AppData\Local\Temp\WERB3A5.tmp.version.txt
Read our privacy statement:
Hello
It's my generic how updates of appropriate driver: (update your video/display driver).
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check manually
by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxHope these helps.
Rob - bicycle - Mark Twain said it is good.
-
Hi, when I use Fileserv to download files, it has a countdown as many file hosting services. However if I go to view the other tabs while the timer is going, it gets paused until I go back to the tab and then it starts again.
For example, I download a file and the timer starts from 30 seconds to the 25 second mark, I discovered a different tab (say to check my email) and after about 40 seconds, or so, I come back to the Fileserv tab and it comes countdown to 25 seconds.
This has not happened before when I was on 3.6.
Is anyway to keep the timer goes? Like 30 seconds is valuable enough to check email or blog while I wait.
Maybe he continues to operate if you pull this tab and open in its own window.
-
Open Web page on a sceen not is not properly displayed when moved to the other screen
Installation: imac 5K retina with a secondary LCD attached via thunderbolt-HDMI interface
Two issues were identified after Firefox updated version 38.0.5:
1. #1 problem: when I open the Web page on imac (main screen), it opens OK, so if I move to the secondary screen, it is not displayed correctly. Looks like a second copy of the same 1/4 of the original page size is superimposed on the upper left corner. See attached screenshot #12. #2 problem: when I open a Web page on the second screen, it opens ok (see the screenshot #2), then if I move it to the main screen (imac), it is not displayed correctly. Looks like the page on elementary school zoomed. See attachment page #2 (in the second screen) and #3 after be moved to the main screen (imac)
Hi njarif,
I've seen this before and he could never adequately describe. I think that you have enough information here to fill out a bug report:- The resources for the filing of a bug in bugzilla.mozilla.org are listed below:
- Bug for assistance: https://bugzilla.mozilla.org/enter_bug.cgi?format=guided
- Bug writing guidelines
-
the other party cannot hear me when video chatting
I use windows Messenger to chat with my family, it didn't happen until recently, but when I start a video conversation, I can see and hear but they can only see me and hear me not, I have no idea why this is happening the Messenger gave me a lot of problems before and it of really annoying, can someone help please!
Hello
I suggest you according to the question in this forum and check if that helps:http://www.windowslivehelp.com/forums.aspx?ProductID=2
It will be useful.
-
while I'm on google talk or chatting video, after about 1 min. they don't hear. Why is this?
Hello
I suggest you try try the steps from the following link:
http://support.Google.com/chat/bin/answer.py?hl=en&answer=162174
If the problem persists, then I suggest you to the post office.
-
Equium M40X - WLan connection drops when using in the other room
Hello
I'm using the SATELLITE M40X series PC laptop and using TG585 ADSL2 + Modem / 802.11 g Wireless Router.
Wireless connection works fine if I use the laptop in the room even when the wireless router is pluged but if I bring my laptop to another room and then disconnected just conection.
I am living in 3 flat bed room and room are right next to each other on an equal footing.
* Note: * I use apply desktop PC as well and is not in the same room where the wireless router is pluged, desktop pc has no problem with the wireless connection.
Any idea?
Thank you
Hello
I think that the reason for this problem is that you WiFi signal is too weak in other rooms.
You can try to change the WiFi channel and may also try to disable Wlan energy saving
These parameters may be changed in the Device Manager-> card Wlan-> properties-> Advanced tab.But to be honest I m not sure if this will help you.
I have a similar problem with my Toshiba laptop not
The WiFi signal is too low in my other room there are two walls and it s clearly perceptible for me when the WiFi signal is ok, and the WiFi signal is too weak. -
Why when I open the other Web site I don't see photo
the website asialadyintroductions.com when I open it, I don't see the pictures of me and my friends colleagues... Why
URL of affected sites
http://www.asialadyintroductions.com
Why when I open www.asialadyintroductions.com
I can't see all the images.
-
Skype video calling on my video and entering video as black rectangles
Checked with a one off Youcam program and get a black square too, but the camera works like video caller can see my fine picture.
Guess that's a direct x issue, made an update of windows, no wizz kids help out me
Area right but bad parameter, I finsihed changes the tab video, video two and changed its basic color to substitute application settings has been swicthed on and I have swicthed he took. Now works OK
-
subqueries, nested, using elements of the other party of the request
Hi all
I have a delicate problem, and I'll try to explain my best:
DB version is 11.2.0.3.0
My current query joins actually 2 tables 'TOTAL_COUNTS' and 'FIXED_COUNTS '. The FIXED_COUNTS table is updated every day when a product has a patch against it and the query returns a list of all products and their "fixed" rate percentage (used in an interactive report of the APEX).create table product_list (product_id number, project_name varchar2(30)) create table products (product_id number, project_desc varchar2(30)) create table total_counts (product_id number, total_count number, project_name varchar2(30)) create table fixed_counts (product_id number, fixed_count number, project_name varchar2(30). fixed_date date) create table product_rating (product_id number, rating number, quarter_last_updated number) create table quarters (quarter_id number, quarter_end_date date) insert into product_list values (1, 'Prod 1'); insert into product_list values (2, 'Prod 2'); insert into product_list values (3, 'Prod 3'); insert into products values (1, 'Prod 1'); insert into products values (2, 'Prod 2'); insert into products values (3, 'Prod 3'); insert into total_counts values (1, 2000, 'Prod 1'); insert into total_counts values (2, 1000, 'Prod 2'); insert into total_counts values (3, 500, 'Prod 3'); insert into fixed_counts values (1, 1, 'Prod 1', to_date('01/01/2013','DD/MM/YYYY')); insert into fixed_counts values (1, 3, 'Prod 1', to_date('01/01/2013','DD/MM/YYYY')); insert into fixed_counts values (2, 50, 'Prod 2', to_date('01/01/2013','DD/MM/YYYY')); insert into fixed_counts values (2, 2, 'Prod 2', to_date('01/01/2013','DD/MM/YYYY')); insert into fixed_counts values (2, 3, 'Prod 2', to_date('01/01/2013','DD/MM/YYYY')); insert into fixed_counts values (2, 3, 'Prod 2', to_date('01/01/2013','DD/MM/YYYY')); insert into fixed_counts values (3, 8, 'Prod 3', to_date('01/01/2013','DD/MM/YYYY')); insert into fixed_counts values (3, 3, 'Prod 3', to_date('01/03/2013','DD/MM/YYYY')); insert into product_rating values (1, 1, 1); insert into product_rating values (3, 2, 2); insert into quarters values (1, to_date('01/10/2012','DD/MM/YYYY')); insert into quarters values (2, to_date('01/02/2013','DD/MM/YYYY'));
It gives me a result like:select A.PRODUCT, A.TOTAL, B.FIXED, a.PROD_ID, round((FIXED/TOTAL) * 100, 2) percent from ( select sum(a.total_count) TOTAL, a.product_id PROD_ID, d.Product_desc PRODUCT from total_counts a, product_list c, products d where a.product_id = c.product_id and lower(a.project_name) = lower(c.project_name) and c.product_id = d.product_id group by a.product_id, d.product_desc ) A JOIN ( select sum(b.fixed_count) FIXED, b.product_id PROD_ID, d.Product_desc PRODUCT from fixed_counts b, product_list c, products d where b.product_id = c.product_id and lower(b.project_name) = lower(c.project_name) and c.product_id = d.product_id group by b.product_id, d.product_desc ) B on A.PROD_ID = B.PROD_ID and A.PRODUCT = B.PRODUCT
The application works very well and does exactly the job I need. However, I now a requirement that when a product gets a percentage rate 'fixed' more than 1% of the product gets a point added against her in a table 'product_rating' and I have to recalculate the percentage of the date, the item has been added (so no points added we take all 'fixed').PRODUCT TOTAL FIXED PROD_ID percent Prod 1 2000 4 1 0.2 Prod 2 1000 58 2 5.8 Prod 2 500 11 3 2.2
To do this, I added 2 new tables: "product_rating" and "quarters". The "product_rating" table contains the Product_id and points, he has accumulated so far. It is updated once a quarter. 'Quarters' table simply contains the dates for us to use for calculations again.
Actually, I need to replace this:
with something like this:sum(b.fixed_count) FIXED
Based on the values in the tables above the percentages for "3 Prod' should now be 0.6.» It is because he received a product_rating the quarter 2, then the new calculation is based on all the "corrections" after this date (only the last March 1 13').if a product has a point against it in the "product_rating" table then we just show fixes from the date the point was added i.e. select sum(b.fixed_count) from fixed_counts b, product_rating c, quarters d where b.product_id = c.product_id and c.quarter_last_updated = d.quarter_id and b.product_id = PROD_ID and b.fixed_date > (select quarter_end_date from quarters where quarter_id = the_last_quarter_updated)
I tried many ways to integrate this into the current query, but I can't make it work. Sorry for not adding the info from the entire table, but the tables total_counts and fixed_counts have many more columns that I removed the query so it would be easier to observe. Thanks in advance for your help. If I can add more info ask please.
Tom
Published by: on May 14, 2013 TomH 08:54
Published by: on May 14, 2013 TomH 08:58TomH wrote:
of course, to the right, thank you.
I added some info table and data that will hopefully a little easier to understand.OK, thank you... to the future but please try and run the commands yourself for you sure they work. What you provided is close, but it has not executed immediately without modifications.
I will start by expressing my concerns for your data model, it seems... well, for lack of a better word. Although you said you deleted a bunch of stuff to make the example. You have someone, you you work who can look at the model for you?
With respect to the query, it's not pretty (I'm in a bit of a rush here) so you can probably clean it considerably. I just tried to show the basics of what you're going to have to do.
ME_XE? with base_data as 2 ( 3 select 4 b.fixed_date, 5 b.fixed_count, 6 b.product_id , 7 d.project_desc 8 from fixed_counts b, product_list c, products d 9 where b.product_id = c.product_id 10 and lower(b.project_name) = lower(c.project_name) 11 and c.product_id = d.product_id 12 ), 13 final_base_data as 14 ( 15 select 16 b.product_id PROD_ID, 17 b.project_desc PRODUCT, 18 sum 19 ( 20 case 21 when b.fixed_date >= stuff.quarter_end_date or stuff.quarter_end_date is null 22 then 23 b.fixed_count 24 else 25 0 26 end 27 ) as FIXED 28 from base_data b 29 left outer join 30 ( 31 select 32 pr.product_id, 33 qr.quarter_end_date 34 from product_rating pr , quarters qr 35 where pr.quarter_last_updated = qr.quarter_id 36 ) stuff 37 on (stuff.product_id = b.product_id) 38 group by b.product_id, b.project_desc 39 ) 40 select A.PRODUCT, A.TOTAL, B.FIXED, a.PROD_ID, round((b.FIXED/a.TOTAL) * 100, 2) percent 41 from 42 ( 43 select sum(a.total_count) TOTAL, a.product_id PROD_ID, d.project_desc PRODUCT 44 from total_counts a, product_list c, products d 45 where a.product_id = c.product_id 46 and lower(a.project_name) = lower(c.project_name) 47 and c.product_id = d.product_id 48 group by a.product_id, d.project_desc 49 ) A 50 JOIN final_base_data B 51 on A.PROD_ID = B.PROD_ID and A.PRODUCT = B.PRODUCT 52 ; PRODUCT TOTAL FIXED PROD_ID PERCENT ------------------------------ ------------------ ------------------ ------------------ ------------------ Prod 1 2000 4 1 .2 Prod 2 1000 58 2 5.8 Prod 3 500 3 3 .6 3 rows selected.
See you soon,.
Maybe you are looking for
-
flat HP 3970 scanner: editing scanned document
I need to know how to edit with WORD a document scanned flat hp 3970. I'm on Windows 10. Thanks in advance for any help you can give me. JoeBuzu P.S. preferably, step by step instructions please.
-
SL510 crashed in the middle of the upgrade of the BIOS.
I had to reinstall the operating system (Windows 7) using my rescue disks after that my computer has been infected by a virus. The re-installation went well and I went to download a series of updates through Windows Update. I also did a few software
-
By playing. WAV in Batch file
I created a batch file. During the treatment, I need to play Chimes.Wav a few times. To do this, I have inserted after a command: Start/min /Open /Play/E:\Windows\Media\Chimes.Wav nearby WmPlayer.Exe However, there is a problem. Top of each time the
-
fejlmeddelelsen WindowsUpdate_80070103
Blokerer for opdatering Fejlmeddelelsen / geninstalering af driveren til min printer canon Mp170 MP 550 - og jeg er helt last. ER der nogen der kan hjaelpe. JEG har Vista. MVH read G
-
It is important to install all the updates popping up on my computer?
Installation of updates I was wondering if it is important to install all the updates popping up on my computer. Looks like I get notifications every day! Is it good or bad to make them... and so good, that I have to do all of them? What those spe