Auto power off when spread to the other monitor__

Similar Questions

• Turn the power off when you insert the new hard drive (additional)

  I have a server poweredge R710 Dell with a PERC 6i controller. Currently, there are 3 installed disks than RAID 5 and are 0-2, all of the listed physical disks are online with no hot spare.

  My question is: I don't have 3 disks to install on the server exactly the same readers who are in the current configuration. Do I have to turn off the server to install these drives?  (I'll use OMSA to develop the existing single VD configured.  I saw a post that says not to shut down the server, so I am just wanting to make sure that everything I do is go on the server, install the new disks in slots open while its engine to the top and then make my other functions in OMSA to extend the RAID.

  Thank you.

  You never turned off to introduce new disks, except IF you are migrating a VD together for another computer or controller.

• HP Color LaserJet M277dw MFP: Disable auto power off after inactivity for HP Color LaserJet M277dw MFP

  What is the purpose of mobile printing solutions if you cannot activate your home printer?
  My printer stop automatically after 8 hours of inactivity and therefore makes it impossible for me to use mobile printing. The printer is connected via WLAN (without active ports to stop the closing).
  In the configuration, there are only options to stop after 2, 4 or 8 hours. No option on disabling of automatic shutdown.
  Pls do that for the people who work on the firmware updates, they must include an option to disable auto power off, many people are already complaining that and nothing has changed so far.
  Its just illogical. You make big announcements for HP eprint and other stuff, but your printers are not able to do so even if you could theoretically make eprint if your standing next to your printer all day.
  I just got this printer pluged and installed and already tired of this BS!
  I know that there is no solution, so just send it to the people who can change it.

  for all of you who read this post, I was in contact with the technical team of HP and they said that they don't give you the ability to disable auto power off on purpose, it is HPs energy-economy-policy to do and there are no plans to change this in the future
  in my case, I only WLAN's, yet is not automatically stop (although it should be), I guess I'm lucky that my router it ping every now and then and is therefore not stop
  If you can't fix it yourself with active ports and may not have at all, it will probably not option left than the back of the printer

• AppleScript to disable auto power off

  Hey guys,.

  I was wondering if there was a way to disable the automatic stop for a mac using Applescript.

  Thank you.

  Mac OS: El Capitan

  MacBook Air early 2015

  What did you use to enable auto power off?

  Do you mean the stop programmed in system energy-saving Preferences?

• Is it possible to stop auto power off while downloading?

  Is it possible to stop auto power off while downloading?

  Can you please be more specific with your problem?
  What model of laptop do you have?

  What happens exactly and when?

• Canon IJ printer utility - disable auto power off

  The manual on my new printer MG2420 says I can "Disable Auto Power Off" of the power settings in the 'IJ Printer Utility'.  However, I have not an IJ Printer Utility in my Canon Utilities downloaded via a Mac driver.  Where is it, or if not, how can disable power off?  I want all the time.  Otherwise, the printer works perfectly.

  OK, no answers so I'll answer I am since I finally figured it.  On a Mac, go to "System Preferences" and click on "Printers & Scanners".  Then click on "Options and supplies."  Then click on "utility".  Then change the "cleansing" in "power settings".

  Then click on 'Auto Power'.  Then click on "Auto Power On" and "turn off".  Finally click 'done '.

  Of course, the Canon online manual is silent on this.

• Monitor not turns off when I close the lid!

  I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

  I have a compaq evo n1015v running windows xp pro, and when I close the lid the monitor stays on! How can I do to the monitor turns off when I close the lid?

  This is probably controlled by the power settings. Once you enter the power settings there should be an option something similar to 'change the closure of the hood '. There are probably several options such as sleeping, ect...

  You can download the manual in PDF HERE.

• Nb505 shuts off when I remove the charger

  for some reason any my Toshiba netbook mb505 turns off when I remove the AC adapter / charger netbook. I can go on the netbook when its plugged in. I also see that the charger is plugged and not to charge and is 99%. If anyone can help it would be appreciated.

  Are you using the original Toshiba AC adapter?

  Looks like the battery or motherboard has a problem and may need repair to a Toshiba repair center.

• How to turn the camera off when I get the picture?

  How to turn the camera off when I get the picture?

  How to turn the camera off when I get the photo I do my iphone 6 mute and when I get the picture give sound

  Some countries do not allow phones take pictures of silent.  iPhones sold in these countries do not allow the sound picture to shut up.

• I activated the auto updates. When I take the update it says in the center of the page "the page failed to load".

  I activated the auto updates. When I take the update it says in the center of the page "the page failed to load".

  I tried to take different paths, as via the Control Panel, but it's the same thing.

  Operating system?

  Try the following: -.

  Open search Vista Start Menu Bar and type: RUN

  Click OK

  Type the following lines, and after each one, click OK: -.

  regsvr32 jscript

  regsvr32 vbscript

  regsvr32 /i mshtml

  No guarantee

  TaurArian [MVP] 2005-2010 - Update Services

• Why my LAN adapter off when I close the laptop?

  Why my LAN adapter off when I close the laptop?  This also occurs when the laptop sitting too long.

  Once the laptop starts up, the LAN adapter must be reset due to a "no valid IP Configuration".

  Why?  Help please!  Thank you.

  In the find top-right panel ' view by '. It is probably set to "Category" view, use the selector drop-down list to choose "small icons". This makes it easier to find for each option.

• When you use Windows Live Photo Gallery SCREENSAVER, monitor off, regardless of power parameters. The power settings work with all the other screen savers.

  Windows Live Photo Gallery screensaver does not extinguish whatever my power settings.  This is the case with Windows Live Photo Gallery.  When you use any other screen saver, the screen turns off according to the way in which the power settings are defined.  It is quite frustrating because I prefer to use as my screen saver Windows Live Photo Gallery.  But he will stay indefinitely if I stop it manually.  Someone has any idea how to solve this problem?   Thank you.

  Hi MaynardCrossman

  
  As the issue seems to be specific to Windows Live Photo gallery, you can contact the Windows Live support team. I would recommend posting your query to community specific to Microsoft Windows Live. Please visit the link below to find a community that will provide the support that ask you in the right direction for Windows Live -http://windowslivehelp.com/product.aspx?productid=20

  I hope this helps.

• Toshiba 32RV635D does not power off when the computer turns off

  Hello

  I inherited a Toshiba 32RV635D. I have a PVR based on linux (Mythtv) connected to the TV via HDMI, connected on a Nvidia GT610.

  With my previous TV, a Vistron LCD Panel at low prices, he would go to sleep when the put PC into hibernation and light up when the PC came back.
  This required no configuration of me, he's done right. The Toshiba TV does not work.

  With this Toshiba TV, when the POR turns off the TV turns off screen but is actually still on - power led remains lit in green.

  Same thing with the other way around - if I put the TV in standby and powered the POR, the TV does not respond and I have to manually put out of Eve.

  I updated the firmware and it has not changed anything, and I can't find anything related to power management in the menus of televisions. I even tried just pulling the HDMI cable to the back of the TV so it has no physical active entry, and yet, it does not fall to sleep.

  The Amazon page for TV mentions the power management features, and I expected from what I understand, it should behave the way she.

  I read a lot on HDMI-CEC, but to use it with my existing kit, I would need to buy an adapter USB - CEC, and which seems a little odd because my previous TV not cheap-as-chips just done this...

  Also, the different uses in linux suggests considers its sounds the right - 'xset q' running when the computer is idle tells me that "the monitor is turned off" when in fact it is not.

  Clues?

  Ricklous, it can be useful if you have a look at the url
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/RV635-323742-English-specific.PDF

  If you want to download the manual of the English edition for your model, I have not read through, but it may be useful to you.

  Either by the way, I have the model 32RL900A and find only a VCR plugged into the claims of taking SCART screen every time it turns on while the TV is set to a string of FTA (Free To Air) and then 'hands back' screen when he (PVR) goes out, and this, I discovered, is a characteristic of the system SCART.

  I don't know if this information is useful to you, but hope it helps.

  donhe7

• I put a site with 2 rectangles (one above the other) in the footer and is cut off when I write the site

  The depth of the rectangle is fine when I view in muse but only cuts off when published

  Hello

  It is because of the text in the middle of the rectangle box (in HAND Master page), please increase its width, and then try to preview.

  Please take a look at the screenshot. I have it increased by 311 px and his work form me.

  Please take a look at the screenshot for better understanding.

  

  Concerning

  Vivek

• My computer suddenly turns power off when I'm uploading photos. Why?

  When I upload photos on Facebook my computer suddenly switches off. What could be the cause of this?

  "Nelson Riñón job" wrote in message News: * e-mail address is removed from the privacy * .com...

  My pc turns off suddenly when I'm uploading photos in Facebook. Why?

  Overheating, driver problems, and many others.  What are your having seen or heard before shutdown? It happens at any other time? Look in Event Viewer to see if you can see any represented pattern that would cause the stop.  Is this a full power off shutdown or a blocking of the screen or the BSOD?  Describe please.