When you try to click on the C: drive of my Vista computer, getting access denied

Similar Questions

• BlackBerry Smartphones no response when you try to click on the links on web pages

  Hey y ' All

  This is a problem that came only in the last day or two...

  Had my Blackberry 9000 for a few weeks and have been able to use internet with it with no problems. However in the last two days, I find that I can no longer click on all links using the trackball. There is no response either whenever I tried to click on the links. This is valid for all websites on all three of my browsers on the device. Text based links, I can just use the command 'Get Link' or press 'enter', but these options are not available for links based on java as the buttons of opening session on Yahoo and some other sites, therefore, I can not in them.

  In addition to the above issues, the trackball seems to work very well. I am able to click on bookmarks, that seems to work... and all the other functions of the trackball (AFAIK) seems to work very well. It's just when I'm on websites that I can't click on the links either.

  I hope this makes sense

  Thank you

  Greg

  Have you tried to reset the device by removing the battery for a minute? After that the battery is given to, it will restart in any 1-3 mins, then try it

• When you try to click on the menus on the USAA, it shows "javascript:;" in the left hand lower corner and the menu do not work in 21 FF. But the menus work in IE 10.

  When I go to USAA.com on firefox, I can't click on the drop down menus. Instead, a box in the lower left corner (where a link address usually show) opens with "javascript:;" If I use IE10, the site works perfectly. I prefer Firefox, so it drives me a little nuts that I have to go for a single site browsers. I have deleted all my cookies, cleared the cache, reset Firefox and start Firefox in safe mode. The Web site still refuses to play nice. All regular links on the site, but in the drop down menus will not.

  FINALLY! Thanks Cor - el!

  I put dom.w3c_touch_events.enabled as 0 and it is fixed. I do not change
  DOM.w3c_touch_events.expose.

  Crazy little question but I am so happy, it's fixed now. Thank you all!

• Finder crashes when you try to click with the right button on any file or icon

  I'm on Capitan 10.11.3. Any icon on the desktop or in finder itself is affected. In addition, I can't open the app store or quicktime.

  Please read this message before doing anything.

  This procedure is a test, not a solution. Don't be disappointed when you find that nothing has changed after you complete it.

  Step 1

  The goal of this step is to determine if the problem is localized to your user account.

  Select the feedback connections* and log in as a guest. Do not use the Safari connection only 'user comments' created by 'find my Mac '.

  While signed in as a guest, you will have access to your documents or settings. Applications will behave as if you use them for the first time. Do not be alarmed by this behavior; It's normal. If you need any password or other personal information in order to complete the test, save, print, or write them before you start.

  Test while signed in as a guest. Same problem?

  After testing, log on to the guest account and in your own account, disable it if you wish. The files that you created in the guest account will be automatically deleted when you log out of it.

  * Note: If you have enabled 'find my Mac' or FileVault, then you cannot activate the guest account. The login 'User comments' created by 'Find my Mac' is not the same. Create a new account to test and delete it, including his home folder, after testing.

  Step 2

  The goal of this step is to determine if the problem is caused by changes in the system of third party that load automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Please take this step regardless of the results of step 1.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you normally connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of steps 1 and 2.

• "Cannot start Microsoft Office Outlook" error message when you try to click on a name or contact us on a Web site to send a msg email on Outlook/microsoft office 2003

  "Cannot start Microsoft Office Outlook" error message when you try to click on a name or contact us on a website to send an email on Outlook/microsoft office 2003 Vista OS msg. My laptop came with Microsoft Office 2007 TRIAL version, but I already had Microsoft Office Pro 2003, so loaded on when I got it almost a year ago. My trial expired months ago... but never uninstalled cause 2003 worked. Then I wanted to do something in WORD and kept pulling up the 2007 trial and was confusing, so I sent the 2007 trial stuff to recycle bin, but not yet the uninstall. Since then all of a sudden I started to get this error msg. I can open OUTLOOK very well... BUT I don't even use OUTLOOK at all. I send from comcast.
  1. How can I get rid of this error?
  2. does anyone know how I can get my comcast open up when I go to a website to webmaster option instead of defaulting to outlook? And I already checked, "set as my default" is NOT enabled in outlook.
  Help, please!

  Hello

  Please check with the experts of the Office and Outlook here: (re - ask your question in these groups)

  Discussions of Questions General Outlook
  http://www.Microsoft.com/Office/Community/en-us/default.mspx?DG=Microsoft.public.Outlook.General&lang=en&CR=us

  MS Office discussion groups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx
  And here:

  Microsoft.public.Outlook discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Outlook&cat=en_us_81f401b3-b3fe-4e8d-B291-066f30b63ec8&lang=en&CR=us

  Office newsgroups
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.Setup&cat=en_us_642d5640-c1ba-43C3-A224-b3ec1473346c&lang=en&CR=us

  I hope this helps. Rob - bicycle - Mark Twain said it is good.

• When you try to upgrade using the Windows Anytime Upgrade feature, it tells me to use a different key.

  Upgrade in Windows 7 Home Premium to professional

  I have Windows 7 Home Premium (OEM Version) installed in Australia and bought a Windows 7 Professional upgrade key in the United States. When you try to upgrade using the Windows Anytime Upgrade feature, it tells me to use a different key, yet my upgrade pack tells me to use the Windows Anytime Upgrade feature! I bought the upgrade from a reputable store in San Francisco. Any ideas why it does not work?

  What is a retail upgrade or full version or an Express upgrade?

  If its OEM license, it will not work.

  If at any time the upgrade fails, Windows Anytime Upgrade Fail:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Is there a way to disable the function where firefox opens a new tab when you scroll a click in the header bar?

  Is there a way to disable the function where firefox opens a new tab when you scroll a click in the header bar? This feature in conflict with my program of multiple monitors (display fusion) since this program allows you to change your current active window the monitor 1 monitor 2 and vice versa BY clicking the header of BAR SCROLLING (or whatever you call the highest part of your window). With firefox, I can't easily change my active window between monitors because instead, it opens a new tab.

  If the window is maximized, you can then switch this pref to disable the display of the tabs in the title bar:

  • browser.tabs.drawInTitlebar = false

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

• After you install a Foxfire 5.0 update, I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  I get this message when you try to open Mozilla: the procedure entry point sqlite3_db_status could not be located in the dynamic link library mozsqlite3.dll.

  Do a clean reinstall.

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 5.0.x: http://www.mozilla.com/en-US/firefox/all.html
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.

  Your bookmarks and other profile data is stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

• Firefox will not print on my HP PSC 750 printer and loses all formatting when you try to print to the printer Brother HL-5240

  I have no problem with one of my printers when printing 11.7 before or IE 6.0.2800.1106 but cannot print from Firefox 3.6.13 (or earlier).
  When you try to print to the HP PSC 750 inkjet printer, a "Print" dialog box appears, showing the title: xyz and a progress meter showing 100%, but it's be covered almost immediately by a second dialog box stating "an unknown error has occurred while printing" and, even if the continuous printer saying 'impression', no printing is taking place.

  When you try to print to the Brother HL-5240 laser printer, printing will take place, but all formatting is lost and what comes out is a block of text unintelligible running.

  What can / should I do to get Firefox to print correctly on my two printers?

  1. print.print_printer reappears after printing something. This pref is the last printer used, so when you reset the prefs it does not appear until you print something.

  2. that your problem with printer HP reappeared quickly, try a new profile.
  
  http://KB.mozillazine.org/Creating_a_new_Firefox_profile_on_Windows

  3. with regard to the preferences for the old printers, if reset you these Pref they don't come back (assuming that you do not select accidentally printers or printer drivers are uninstalled).

• error when you try to download on the internet.

  Help!

  I get an error; "Extended attributes are incompatible" when I try to download on the internet. Why and what to get fixed?

  Need your help as soon as POSSIBLE. Thank you.

  Sincerely,

  Melinda

  How is it related to the installation, upgrade and activation of Windows Vista?

  Tell you download or install?

  If you mean install:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/the-extended-attributes-are-inconsistent/129b7935-2da2-47B2-8b4d-e8b581e12b54

• Adobe Reader crashes when you try to print to the printer? Why? Any ideas would be great on how to solve this problem for my clients...

  Adobe Reader crashes when you try to print to the printer?  Why?  Any ideas would be great on how to solve this problem for my clients... This seems to be a problem once the latest version of windows update 03/08.  I don't know if it's a real problem Adobe, IE question, question of operating system or printer/printer driver problem.

  Someone please help!  Thank you

  In fact, I have not... However, I have to go change the preferences of Adobe and to take do not open in the Internet Explorer browser and that seems to have solved the problem for now.  However I am still confused about whether it is a matter of IE8 or Adobe 9 and X... Because it's not all my clients with that number only some of them...

• Download error when I try and click on the apps section [was: download]

  When I try and click on the apps section in creative cloud that it says download error please contact customer. Can someone please tell me what this means in order to fix and continue with my school.

  Windows or Mac?

  What is the full error message? like its saying, Installer is no longer functional or unable to reach the server Adobe... etc?

  If possible after the screenshot of the error message.

  Wired Ethernet or Wireless/Wifi Internet access?

  In the meantime, try with the steps mentioned in the link below:

  https://helpx.Adobe.com/creative-cloud/kb/download-error-apps-tab.html

• I have a license for Indesign and purchases another since my old computer was attacked by pirates. When you try to load to the new computer, it starts with a 30 day free period etc. I already have an ashen´me of monthly payment and seem not to be able to

  I have a license for Indesign and purchases another since my old computer was attacked by pirates. When you try to load to the new computer, it starts with a 30 day free period etc. I have a monthly payment and don't seem to be able to upload it to my account on my new computer. I have access to my account online but cannot get to the correct download page. ????

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

• When you try to download a PDF file to an interactive site, I get the announcement: "the attached PDF file is referring to a non-embedded font Tahoma. Please delete, incorporate the police and set again. "How to integrate it, or in fact any other font?

  When you try to download a PDF file to an interactive site, I get the announcement: "the attached PDF file is referring to a non-embedded font Tahoma. Please delete, incorporate the police and set again. »

  I couldn't get rid of the Tahoma police in the WORD file.

  How to integrate it, or in fact any other police?

  It should be an option to make the PDF.  Which version of Acrobat you are using, and exactly the method and parameters do you use to make the PDF?

• When you try to delete e-mail messages in Windows Live Mail I get message "an unknown error occurred.

  Original title: "Uknown error has occurred", you can say that again!

  I use Windows 7 Edition home premium. When you try to delete e-mail messages in Windows Live Mail I get the message "an unknown error occurred. This seems to happen only when I want to delete the messages that have already been opened. Can I delete mail unopened very well. I am allowed to remove an open both message. But as I do that a few times to the top appears the message again stop again.

  Hi Rasrick,

  1. you receive with the message error codes?

  You can check out the following link and check if it helps:

  http://windowslivehelp.com/thread.aspx?ThreadId=8255bf0a-05ca-4e63-9c7c-b456e9c3a648

  If this problem occurs only with Windows Live Mail, you can post the question in the Windows Live community:

  http://windowslivehelp.com/product.aspx?ProductID=15

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.