whenever I connect the cable that I have "installing driver software device.

Similar Questions

• Error when you try to burn a CD: Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver. ???

  I just burn a CD with no problem at all.  Using the same type of CD, brand new, I tried to burn another CD and got this error message:

  Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary, check that the burner is connected properly and that you have installed the latest device driver.

  I close all programs running, restarted my computer, changed on the devices tab, the speed of burning... everything I know to do and all the things I've read in these forums, no luck... still get the exact same message.  No idea why my CD-writer has decided to stop working for me?

  Hi Cierrajade,

  1. you have any third-party DVD burning software installed on the computer?

  Method 1

  You can use the convenience store open playing and burning CDs, DVDs and Blu - ray discs built in Windows 7 and check to see if it helps you to trouble the CD plays the questions.

  For more information about how to open the resolution of problems in Windows 7, go to the link below and follow the steps.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-and-burning-CDs-DVDs-and-BluRay-discs-Troubleshooter

  Method 2

  If you have any third party CD\DVD software installed on the computer of engraving I suggest you uninstall and check back later if you can burn CDs with success.

  Disc burning: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

  Method 3

  If the previous step fails, check if you can burn CDs using Windows Explorer

  Burn a CD or DVD in Windows Explorer

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Player cannot burn the files. If the burner is busy, wait until the current task is complete. If necessary check the recorder is connected correctly and that you have installed the latest device driver. ______

  If you guys tell me to check and make sure that the CD burner is connected; been there, done that.
  If you guys tell me to uninstall the device, then reinstall; He does that
  If you guys tell me to try new disks; summer it does this as well.
  I lowered the burn speed ect.

  I did everything possible. I can burn a disc once or a little then next I get this error.

  I still have to burn the disc from system restore and I fear for fear of getting this error. I think I have the external writer since bad things is a good idea to test things before putting.

  Hello

  This link should be useful

  http://www.Microsoft.com/windows/windowsmedia/player/10/errors.aspx

  http://forums.techarena.in/Windows-software/1195200.htm

  http://Windows-Media-Player.software.informer.com/questions/13333/

  Good luck

• I bought my code and subscribe to publishing CC student and Professor (a year), but all the products that I have installed are still testing, what continues?

  I have followed the instructions, checked my email because the ID Adobe and Adobe CC, assured that I would have access to full versions of adobe products, but still they are installed in the trial. I am currently using MacBook Pro.

  Creative cloud download & install How do I activate/redeem Redemption Code CC Adobe

  Hi Denzel,

  Please see the below help documents:

  Creative Cloud applications unexpectedly back in the test mode. CS6, CCM

  Using redemption code

  Kind regards

  Sheena

• At startup, I get the message "Windows needs to install driver software for your UNKNOWN DEVICE" I am unable to use a Canon Pixma HP280 printer.

  Have talked at length with cannon Tech I informs me that the problem is not a problem of hardware and Microsoft Software

  I've seen several posts on a 'SPOOLER PROBLEM'

  Manual Cannon don't mention spooler.

  My system is Windows Vista Home Basic 32-bit.

  Thank you

  Go to the Device Manager and see if "other devices" is listed, then uninstall it.
  If the device is connected before the driver being installed or the driver was not installed correctly, the device will appear under 'Other devices' or 'unknown '.

  see this:

  Service and Support
  http://www.USA.Canon.com/Cusa/support/consumer/printers_multifunction/pixma_mp_series/pixma_mp280?selectedName=ServiceAndSupport

  Click on "Frequently Asked Questions", then click on "remove [device] of Device Manager.

• I downloaded the new 9. ? version said to my PC to run it. It said to restart my system which will come into force. Yes, I did. Whenever I try to access the line, it gives me the message that I have to restart my system. What should I do?

  I downloaded the new 9. ? version said to my PC to run it. It said to restart my system which will come into force. Yes, I did. Whenever I try to access the line, it gives me the message that I have to restart my system. What should I do?

  Do a cleaning (re) install and delete the folder of the program Firefox (C:\Program Files\Mozilla Firefox\).

  Download a new copy of Firefox and save the file to the desktop.

  • Firefox 9.0.x: http://www.mozilla.org/en-US/firefox/all.html

  Uninstall your current version of Firefox, if possible.

  • Do NOT remove the data of a personal nature when you uninstall the current version or you lose your bookmarks and other data in the profile folder.

  Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.

  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • http://KB.mozillazine.org/Uninstalling_Firefox

  Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/Profile_backup
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Clean_reinstall

• How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point

  How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.

  Thank you!

  Townes wrote:

  I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!

  Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.

  I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.

• How to connect the cables to an AMD Radeon HD 7450 video card for two monitors individual work?

  I have a HP Pavilion p6-2360eo with the video card Radeon 7450 connected to a monitor of 23xi Pavilion.

  Now, I want to add a monitor of 23xi more, but I do not understand how to connect the cables to the video card to get two logical screen (different views on each monitor)

  Supposedly this monitor can connect to the video card, you have the HDMI connection.  Assuming that the first monitor is connected via DVI, then try a HDMI cable to the second.  I got this from the description of the video card on THIS page.

  Support up to two displays at the same time in these configurations: DVI, HDMI and VGA + HDMI (using the included adapter cable)

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• using converter to connect the cable presentation to SX20 codec

  Hi all

  We SX20 and we need to make the presentation of video calls.

  We have HDMI cable stretched between the codec and the Conference table, the problem is that we can't get more cables of the codec to the meeting table.

  I tried to use a DVI HDMI converter to connect the cable to the codec, but unfortunately it did not work.

  It is a specific type of converters that will work?

  has anyone have the same problem and managed to resolve it?

  or is it at least, is a document of cisco mentioning that the converters will not work in this case?

  Thanks in advance.

  Amit: If you see a calbe like that "DVI2VGA" is already a "converter", at least if I read what Ibrahim.

  In general, a cable or a DVI to HDMI adapter should work.

  If this does not work, check with a different resolution or source (different computer)

  and see if the cable is not for long (try a shorter for example)

  and try the adapter on a different Setup.

  Which would not have worked is DVI-> VGA and VGA-DVI-> HDMI > as VGA would break the digital signal

  Analog = only VGA, HDMI = Digital only, DVI can carry both, but there may be no ordinary VGA2HDMI cable.

  In addition, Ibrahim should check what is the definition of the type of entry for the dvi input.

  I woud try it with first auto and then select digital and see if that makes a difference.

  Please remember useful frequency responses and identify useful or correct answers.

• Windows 7 will not recognize that I have installed the driver for my MICROSOFT xbox wireless gaming receiver

  Hello
  first of all, let me say thanks for reading this e-mail message. I have a problem with windows 7 64 bit recognizing that I have a driver installed on my compuetr, I installed the tha tcame with the cd software and that did not work, it appears as an unknown device in devices and printers, I tried to download the driver for windows 7 64 bit on the microsoft site after uninstalling CD. then I have insalled Traore, one on the microsoft site and it says the same thing, I can't then turned to devices and printers and he said that this device does not a driver installed. I tried so many times with the same results. I restored the system time ind time new and re-installed windows 7 two times and still the same problem, I've done alll I can again and again until im just sitting at the computer that I'm beyond angry, now just totally lost it please can you help as I think I've tried everything

  Thank you for the hope

  creepyz

  Hi creepyz,

  Please see things to try when the game Microsoft Xbox wireless receiver is not detected in Windows PC.

  1. check that the accessory is an accessory wireless Xbox 360 officially licensed.

  2. examine or replace the batteries to make sure that you loaded the batteries of the accessory wireless Xbox 360.

  3. move the receiver away from other devices that may interfere with the communication between the receiver and the accessory wireless Xbox 360 Wireless.

  4. Note: devices such as wireless routers, phones wireless and microwave ovens can generate Wireless interference.

  5. If the light on the receiver does not light, check the USB connection between the receiver and your computer. Make sure that the receiver is connected to a powered USB 2.0 port.

  6. If you use a wireless keyboard or mouse, disconnect the keyboard or the mouse, then reconnect the wireless gaming receiver. Then try reconnecting your device wireless Xbox 360 to the PC.

  See please visit the link below which deals with this subject.

  http://support.Xbox.com/support/en/us/Xbox360/KB.aspx?ID=933709&lcid=1033&category=hardware

  Please check How to configure and use your Xbox 360 Wireless Gaming receiver for Windows, for more help, check out the following links below.

  ·         http://support.Xbox.com/support/en/us/NXE/contactus.aspx Support for Xbox

  ·         http://forums.Xbox.com/ Forums

  Concerning

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• When I connect my computer to the Netgear router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access.

  I have both a laptop and a desktop computer and use a modem wired high-speed internet.  I bought a router "Netgear" 5 port so that I could have both online at the same time, but when I connect my computer to the router, they do not seem to recognize the signal from the modem. I have to run each device directly to the modem (one at a time) for internet access. It gets very tedious, please help...

  Original title: router does not work...

  Hello

  Welcome to the Microsoft community.

  I see that when you connect multiple computers using the Netgear router, it does not recognize the signal from the modem.

  You must contact the ISP to verify if they can help you with this question.

  In addition you can keep these items handy, it might help you.

  Set up a wireless router

  http://Windows.Microsoft.com/en-in/Windows7/set-up-a-wireless-router

  Install or remove a modem

  http://Windows.Microsoft.com/en-in/Windows7/install-or-remove-a-modem

  Change modem settings

  http://Windows.Microsoft.com/en-in/Windows7/change-modem-settings

  It will be useful.

  If you need help with Windows, let know us and we will be happy to help you.

• The TNS service name gives preference to connect the instance that is in a mount

  OS: HPUX
  Oracle version: 11.1.0.7
  
  Why TNS service name give preference to connect the instance that is in a mode of installation and the dsiaply ' ORA-01033' as mentioned below.»
  I wanted to connect the single instance that are OPEN (no EDITING) using connection string and want to know the status of all instances using SQL query "select instance_name, status of gv$ instance. How can I achieve this?
  
  I have four-node rac and instance cluster four, one instance on each node and the State of the instances are as shown below
  
  SQL > select instance_name, status of gv$ instance;
  
  STATUS INSTANCE_NAME
  ---------------- ------------
  dtrac1 OPEN
  Dtrac4 ROAD
  dtrac3 OPEN
  dtrac2 FORCE
  
  I tried to connect using the name of the service "dtrac" (the tnsnames Details give below) any node, it gives priority to the instance that is set up and shows the sequence of error messages
  
  SQL > conn system/vcs@dtrac
  ERROR:
  ORA-01033: ORACLE initialization or shutdown in the process ID: ID of Session 0: serial number 834: 139
  
  
  WARNING: You are more connected to ORACLE.
  SQL > conn system/vcs@dtrac
  ERROR:
  ORA-01033: ORACLE initialization or shutdown in the process ID: ID of Session 0: serial number 834: 139
  
  
  SQL > conn system/vcs@dtrac
  ERROR:
  ORA-01033: ORACLE initialization or shutdown in the process ID: ID of Session 0: serial number 834: 139
  SQL >
  
  
  When I change dtrac2 instance in NOMOUNT or OPEN State, then connection correctly goes to instances that are open.
  
  TNSNAME.ora file:
  ==================
  
  
  tnsnames.ora # Network Configuration file: /oracle/db11g/network/admin/tnsnames.ora
  # Generated by Oracle configuration tools.
  
  DTRAC =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))
  (LOAD_BALANCE = yes)
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = dtrac)
  )
  )
  
  DTRAC4 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = dtrac)
  (INSTANCE_NAME = dtrac4)
  )
  )
  
  DTRAC3 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = dtrac)
  (INSTANCE_NAME = dtrac3)
  )
  )
  
  DTRAC2 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = dtrac)
  (INSTANCE_NAME = dtrac2)
  )
  )
  
  DTRAC1 =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = dtrac)
  (INSTANCE_NAME = dtrac1)
  )
  )
  
  LISTENERS_DTRAC =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))
  )
  
  LISTENER_DTRAC4 =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal08-vip)(PORT = 1521))
  
  
  LISTENER_DTRAC3 =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal07-vip)(PORT = 1521))
  
  
  LISTENER_DTRAC2 =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal06-vip)(PORT = 1521))
  
  
  LISTENER_DTRAC1 =
  (ADDRESS = (PROTOCOL = TCP) (HOST = slpal05-vip)(PORT = 1521))

  Too bad, I was hoping that it would work with srvctl

  [email protected] wrote:
  As you say a different way of configuring the service by referring to the favorite and attributes available for instances, but its not useful to know the instances that are open. Its helpful to separate the work to specific nodes by creating different services for different applications.

  Certainly, it only would be logical if you know in advance that you want to start an instance in editing mode and you want to bypass the connection failure. But when you know you're going to just mount a database he used to try to find later.

  I searched a bit on metalink and found notes 69546.1 which States that PMON will record with listeners the and remote start the instance, same no editing is required. Which is obviously stupid because of the error message you get when you try to connect.

  797713.1 note describes your exact problem and a solution. I'd love to quote, but I'm not sure if this is allowed or not. So instead I'll summarize what I learned: the default service that you create during the installation of first CARS behave as in one instance. As soon as the instance starts, it will register with the other. This is actually intended for you can perform administration. When you create additional services via srvctl or crs, they will somehow managed by crs and only you sign up once the instance is 'up' (I guess they mean open).
  So the solution would be to create another service through srvctl and use it for your connections.

  Bjoern

• I would like to know how I can make firefox stop the message that I have to restart my browser to complete the update without having to reboot?

  I would like to know how I can make firefox stop the message that I have to restart my browser to complete the update? I'll restart later, but does not wish to do so immediately. I can
  Click on the cross, but after a few minutes the message is back and I can't figure out how to stop
  It's popping every few minutes.

  You need to restart it.

• I downloaded the latest version of Firefox a number of times, but when I install sites keep insisting on the fact that I have the old version.

  Web sites such as Firefox/Google search page and keep DeviantArt, insisting on the fact that I have the old version. I don't!

  Your user agent is corrupted by the Fast Browser Search (FBSMTWB) that identifies you like Firefox/3.5.5

  see your user agent:

  Mozilla/5.0 (Windows; U; Windows NT 6.0; en-US; RV:1.9.1.5) Gecko/20091102 Firefox/3.5.5 FBSMTWB

  you need to reset the user agent

  See also these pages and discussions on Fast Browser Search (FBSMTWB in the user agent).

  http://help.fastbrowsersearch.com/

  http://www.pccybertek.com/2009/05/remove-fast-browser-search

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.