Whenever I try to maximize a window, it does not fill the screen

Similar Questions

• Program BACK in Guest XP on Windows 7 does not fill the screen

  Hello world

  I have a quite unique due to many circumstances situation and several months of research to get to a decent workaround.

  I have a tool written in Basic for MS-DOS. I need to use this tool and the interface with the files created in Windows 7. VMWare Player with no very good support for sharing files between DOS with Windows 7 clients, I have opted for a guest of Windows XP on my computer Windows 7 host and who go through the program. In this way, I can share files between XP and 7 and run the program correctly in the XP VM. Note that this program doesn't work at all on Windows 7 due to some problems graphics driver, hence the need for such a solution.

  When I run the XP VM, it is able to match the resolution as expected. However, when I open the program BACK, he is not full screen as it does on a native XP machine or even a VM XP in VMWare Fusion on a Mac. Is there a way to force it to fill the screen? The graphics full screen are vital for visibility - I can barely see anything on the screen of dinky little 640 x 480 without blowing up to its maximum potential.

  I tried several other options, including a Windows VM (I'm under Windows 7 Enterprise) and DOSBOX. Windows VM has the same problem resolution in addition to requiring the integration of features enabled to share files and requiring the same integration disabled features in order to run the program and the DOSBOX not full screen but the performance is much too slow to be practical (it is similar to take 2 minutes to scroll through a web page that is several pages a notch long) even at maximum settings.

  Please no suggestions ' do you have the printer "-I am part of a team of average size on how it works and it's pretty much the last roadblock after several months of work. We probably tried everything which is immediately obvious, including the recompilation of the source code for the program BACK (that we had to do anyway to remove a lock imposed by a society that no longer exists).

  The closest that I have is to reduce the resolution of the host Windows 7 in 800 x 600, which makes the VM a bit larger but still not quite full screen. I try to activate the VGA 640 x 480 mode, I guess? Even in this case, however, the need for constantly changing screen resolutions makes this solution less than ideal.

  Thank you for all the suggestions/help.

  Do I understand correctly:

  -It is an application with a fixed resolution of 640 x 480 fullscreen

  -You want that he developed the scale to fit to your screen

  As far as I KNOW, VMware Player is not just what to do.

  There is a tutorial in the section documents for a workaround (using the changer display to automatically change the resolution of the host).

• Window does not fill the screen of the computer

  I have a black margin of 1 inch on each side of the window on my laptop.  How can I get the entire screen to be filled?  I don't know how I messed up this - but I don't know that there is this operator error!

  the cursor won't go the black margn. Thblack margins are around the entire screen with a box in the middle with the window. Help please!

  Next time please start your own thread. This began in July 2009. That is 1 year and 3 months.

  Try this:

  1. set the resolution of the screen
  Right-click on a free space of your desktop computer > click Customize > click on display settings > use the slider to change the resolution > click OK when finished.

  Resolution based on the screen size

  Monitor 15 inch	1024 × 768
  17 to 19 inch monitor	1280 × 1024
  monitor 20 inch and liked	1600 × 1200

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows 8 screen does not fill the screen of my laptop, how to correct?

  Just installed windows 8 on my laptop, but it is less broad than the laptop screen (there are black stripes down each side approximately 1 "wide).

  Tried to set the resolution, but it will not let me, how do I fix this please?

  Welcome,

  step 1: download your graphic driver.
  This link might help you:
  http://answers.Microsoft.com/en-us/Windows/Forum/hardware/display-driver-issues-in-Windows-8-consumer/93866a8c-4ef6-4ae5-BD46-58d3e3def5e9
  http://Windows.Microsoft.com/en-pH/Windows/hardware-drivers-help#hardware-drivers-help=Windows-7
  Then, you can change your resolution in the Screen Resolution settings window, or click with the right button of your office.

  
  This site might help you

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  resolutions of laptop are usually:

  1400 × 1050

  1280 × 800

  1024 × 600 (unusable due to the conflict in the requirements)

• I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows."

  * Original title: start Windows 7

  I recently accidentally dropped my laptop and now whenever I try to turn it on, it gets frozen on the screen with the logo of "starting windows." When it disappears, the screen just goes black and nothing else happens. Logins appear not at all. I also tried to run in safe mode and safe mode with networking mode, but it has not loaded yet even to the windows splash screen. I ran Startup Repair 3 times now and he has not yet fixed my problem. I was wondering if it might have been damaged in the fall.

  Probably yes it is damaged in the case otherwise he would start.

• Satellite L30-105 (PSL33E) Windows Vista does not see the DVD - ram UJ-850 s

  Hello

  I have a Satellite L30-105 (PSL33E) with windows Vista. Windows Vista does not recognize the DVD - ram. BIOS recognize DVD-ram. I tried to download the drivers for the DVD-ram, but they are not on the side of Toshiba.

  Who can help me to get the right driver or learn more? Problems with the carpet * a DVD-ram uj-850 s ATA device and windows Vista.

  Hello

  The CD/DVD drive needs no special drivers!
  Vista includes a Microsoft driver that works with all CURIOUS s (CD/DVD drives)

  Simply said, the Vista should recognize the drive without any problems.

  A few questions; did you get any error messages? What is the status of Device Manager? Do you see yellow exclamation points?

  There is an old way to correct a similar drive problem. It worked on XP then try it on Vista OS.
  It of necessary to update the registry entry
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  1. click on the start menu.
  2. If it is a Vista machine in the search box type regedit without quotes.
  3. look for the registry key mentioned above.
  4. in the right panel you'll see something along the lines of UpperFilter and UpperFilter you want to click on each key filter and tap on delete. Click Yes when asked to confirm if you want to delete the key.
  5. restart Windows.
  6 let me know if it works.

• Windows XP does not install the automatic updates.

  Original title: kopieerfout

  After several years, my laptop with Windows XP does not install the automatic updates, giving only a mistake:

  "

  ER is een doing opgetreden bij het van het bestand ntoskrnl.exe copying

  Kan het bestand niet naar doelmap copying.

  Everything works OK.

  Thanks for your help

  Everything works OK.

  It seems that it is not... Why Dutch? You use or have the corresponding language version installed?

  Free translation of message:

  "An error occurred during the copy of the file ntoskrnl.exe
  Cannot copy file to destination... »

  Please note that ntoskrnl.exe is a process in the cycle of the initial startup on your computer program.

  Try to load your "last known good configuration".

  The issue is also known to be caused by a short circuit in the ground cable into the keyboard cable. Make sure that it is not the cause of your error by replacing the keyboard with another keyboard or just disconnect the keyboard from the computer. You can also look at your function "Add or remove programs" If KB2686509 <> http://support.microsoft.com/kb/2686509 > is installed.  Install manually if it is not.

  If the above doesn't help, try using the Sfc.exe tool - see here > http://support.microsoft.com/kb/310747

  Or run the Chkdsk tool - see here > http://support.microsoft.com/kb/315265

  If still no luck, you may need to restore the file ntoskrnl. exe as follows:

  1 - insert the Microsoft Windows XP CD. Note: If you have a recovery CD or a restore CD and not a Microsoft Windows XP CD is probably the procedure below does not solve your problem.

  2 - restart the computer and that the computer starts, you should see a message press any key to boot from the CD. When you see this message press any key.

  3. - in the Microsoft Windows XP setup menu, press the R key to enter the recovery console.

  4 - Select the operating system you want to set and enter the administrator password.

  5 - type expand d:\i386\ntoskrnl.ex_ c:\windows\system32

  6. - you will be asked if you want to overwrite the file, type Y and press enter to replace the file.

  7 - type exit to restart the computer.

  Hope this helps - good luck!

• Windows Messaging does not mask the images in emails after installing ie9

  I have Windows Mail to block images in my emails, but that after the installation Internet Explorer9 windows mail does not block the images in my emails even if the parameters are always the same. I had to uninstall ie9 for this reason, except that ie9 seems to work. Vista Home Premium SP2.

  Stringy salvation,

  Try to upgrade to windows live mail 2011 and check if it works with IE9.
  Maybe just the problem of the software with Windows mail.

  http://explore.live.com/Windows-Live-Mail?OS=other

• I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service.

  Application of program compatibility does not start

  I use a database program in a number of previous versions of windows and windows 7 does not allow the program to launch denial of service.  What gives?

  If you have Windows 7 64 bit without BACK program can run because there is no 16-bit subsystem to run it.

  Try dosbox http://www.dosbox.com/. If that won't work your program, you'll need either a new database or run the BACK or on a 32-bit version of Windows in a virtual machine like VirtualBox https://www.virtualbox.org/.

• Windows 7 does not open the windows in the taskbar. The content seems to be displayed off the screen

  Windows 7 does not open the windows in the taskbar. The content seems to be displayed off the screen. It started after the uninstall of Registry Mechanic and PC Tools, but this cannot be bound. IE 9 seems to be particularly affected. So do not display all of the windows that show on the taskbar.

  Use the Windows logo key & left arrow several times for each windows application through their positions until they appear on the screen.

  This problem is normally reported after someone used an external monitor as the applications try to open in the same position they had when they were last open - so if there was an external monitor last time now disconnected, they will try to open it in the middle of nowhere.

  I know not, or the other tools that you mention, but if they are registry cleaners then they could also affect other parts of your system.

• Windows 8 does not see the hard drive on the Satellite A200

  Windows 8 does not see the hard drive on the A200.
  How to install it?

  S strange Windows 8 should already contain the HARD drive controller driver to recognize the HARD drive during installation.
  The HARD drive is visible in the BIOS?

  Do you use the original disc from Microsoft of Windows 8?

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby

• LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  LG C500-G. AEE5GE1 with Windows 7 home prem OA MEA have been formatted. But despite giving the product key and Windows registry does not recognize the activation. Help, please

  Name of the operating system Microsoft Windows 7 Home Premium

  Version 6.1.7601 Service Pack 1 Build 7601

  Manufacturer of operating system Microsoft Corporation

  System name HANDSOME-PC

  System manufacturer LG Electronics

  System model C500.-g. AEE5GE1

  System Type X 86-based PC

  Processor Intel (r) Core i3 CPU M 390 @ 2.67 GHz, 2666 Mhz, 2 Lossnay, 4 logical processors

  H46YSF00 Version/Date of BIOS American Megatrends Inc., July 2, 10

  Product key:

  X 16-96084

  CONCERNING

  TUESDAY BIOJY

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Windows 8 does not support the prolific usb to serial driver

  Windows 8 does not support the prolific usb to serial driver
  What is the solution?
  We want to use windows 8, but because of this driver issue, we do not buy windows 8

  Windows 8 does not support the prolific usb to serial driver
  What is the solution?
  We want to use windows 8, but because of this driver issue, we do not buy windows 8

  Understand when the manufacturer of the hardware device will provide you with the drivers for the hardware you want to use on the operating system you want to use.  If they aren't - so there you go.

• Install Windows 8 does not recognize the system drive

  I built a new machine (chart below). Since this is a new machine and not an upgrade, I bought Win 8 Pro 64 bit OEM to do a clean install. The SSD is my system disk that Windows 8 will be installed. Four data drives are mirrored, two for the other two. Construction went perfectly. The BIOS recognizes all six disks: 1 SSD, 4 HDD, 1 DVD.

  Insert and boot the disk of Windows 8. Accept the EULA, enter the product key. Arriving at the page "Where do you want to install Windows?", only four hard disks are listed. The SSD (installation to go) is not found by Win 8. ??? I tried to change ports SATA, cables, power supply - no difference. For each new change of hardware, the BIOS still sees everything. This isn't a hardware problem.

  The question remains: why the installation of Windows 8 does not recognize the SSD drive. All five disks are on AHCI. I'm not in RAID.

  I spoke with crucial technical support of all (manufacturer of the SSD). They were also surprised that the drive does not appear in the list.

  Does anyone have a solution? I spent all the money on hardware, as well as the new version of Windows and I cannot install it.

  This is the real kick in the teeth: Microsoft won't support me. The OEM of Windows 8 version is the same as manufacturers, such as Dell or HP. Support told me I had the support of the manufacturer. HA! I am the manufacturer. Either that or upgrade from an earlier version of Windows. This means that any that a new construction machine will get ZERO assumption of Microsoft. All just great.

  Thank you in advance for any assistance.

  Windows 8 Pro 64-bit (full version) - OEM
  Intel Core i5 - 3570K
  Card mother GIGABYTE GA-Z77X-UD5H
  Crucial Ballistix 2 x 8 GB DDR3 1600
  Crucial M4 2.5 "128 GB SSD (system disk)
  WD Green WD30EZRX x 4 (data readers) 3 TB drive
  Rosewill Challenger-U3 ATX Mid Tower Case
  SeaSonic M12II 620W 620 Bronze PSU
  ASUS DVD writer

  The DSS must be LOW LEVEL FORMATE.

  Once, there may be no other [HDDs] not connected to the SATA ports.

  Install Windows 8 Pro now.

  [Edit] Can someone please mark this as answered? I can't because I posted the question. Thank you.