where do the updates installed on your pc?

Similar Questions

• While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language.

  KB952155 Setup Error.

  While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language. Now, that - what it means and how can I fix it? I have installed SP3

  Eivind Aakhus Hello,

  If you have the latest version of Office installed on your computer remotely, then you need to enable the Active X control.

  Follow these steps to activate the ActiveX module.

  a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.

  b. click Tools, point to manage add-ons and then click Enable or disable add-ons.

  c. in the list view, click to view all ActiveX, ActiveX controls downloaded controls.

  d. choose the one you want to activate, and then select Enable.

• The Installation of VMWare tools failed. In any case to force the update/install VMWare tools?

  I used to use VMware Workstation 10 and recently upgraded to VMware workstation 11.  However, whenever I try to install a newer version of VMware tools, it will fail with message saying something like "VMware Tools can be installed in the Virtual Machine.

  Yes, I am trying to install VMware Tools within the guest operating system, but I get this notification for all my virtual machines, I'm running.

  I'm under 6 Virtual Machines simultaneously and they run on Windows 7 32 bit OS and configured with 4 GB of RAM, 1CPU, 100GB HD + 5 GB second HD for the swap file, NO printer, no sound card.

  For each virtual machine, I changed about 50 + key of Windows registry and detect the values to hide from all the programs that they are running on the virtual machine.

  I assume due to records, I changed, it confuses VM installer who it is not running on a Virtual Machine.  Then I tried to change all these registers changed to send it back to the original value, yet I is always the same message.

  I must be missing either some registry values or values that I restored is false. But I don't know which is the case.

  I can simply delete all my Virtual Machines and start again with the new virtual machine, but I don't want to repeat this process whenever a newer version of the VM tools out. and installation of windows and search and replace registry values for each virtual computer is full of works.

  So, here is my question.  Anyone know how to force the update / install VM tools in my virtual machine?

  P.S. I added under scripts in the file .vmx for each of the virtual machines.  I don't think it would cause the problem but just in case I include it.

  SVGA.vramsize = 268435456

  monitor_control.restrict_backdoor = "" true ".

  insulation. Tools.getptrlocation.Disable = 'true '.

  insulation. Tools.setptrlocation.Disable = 'true '.

  insulation. Tools.setVersion.Disable = 'true '.

  insulation. Tools.GetVersion.Disable = 'true '.

  monitor_control.disable_directexec = 'true '.

  SMBIOS.reflecthost = 'true '.

  memtrimrate = '0 '.

  mainmem.usenamedfile = "false".

  sched.mem.pshare.Enable = "false".

  prefvmx.userecommendedlockedmemsize = 'true '.

  Tent Installer to get the version information of the hypervisor of underling to see if it is a VM or not.  This is done by contacting by back door.

  Setting monitor_control.restrict_backdoor = "true"prevents communication."

• Where is the update to photoshop Lightroom CC 2015 for Sonys RX10II photos in raw, named *.arw?

  Where is the update to photoshop Lightroom CC 2015 for Sonys RX10II photos in raw, named *.arw?

  Hi erwink37546780,

  You need to update Lightroom creative cloud.

  As the camera Sony RX10 II is supported in Camera Raw 9.1.1, Lightroom 2015.1.1, so please update creative cloud Lightroom.

  Kind regards

  Tanuj

• where is the location of the updates installed in Windows XP

  Looking for the path of updates installed on windows XP, Windows 7. I mean the location in the drive and the folder

  Looking for the path of updates installed on windows XP, Windows 7. I mean the location in the drive and the folder

  Not quite sure what you mean but, in Windows XP, updates are stored on the root drive (the drive where Windows is installed in) in
  WINDOWS\SoftwareDistribution\Download
  The uninstall files are stored in subfolders hidden from the Windows directory and are named $NtUninstallKBxxxxxx$.

  Windows 7 puts the updates in the same location as XP, but they are not reusable, because their content is stored in the BONES (in Volume Shadow service and component based) as are their uninstall information.

  MowGreen Services update - consumer safety

• Applications created with the Application generator does not start. It was after that I allowed the update install patches. Now the Version is 12.0.1f3 (32 bit)

  Help! Do not know what happened... I left the patch install the updater f3.  Now, when I create an application, it appears on the task bar (Windows 7) for a few seconds, then goes.  I don't know where to begin to understand this.

  Thank you

  Rich

  It is on the same computer.  The PC has the standard COMPUTER stuff.  VIper and they handle most of the firewall settings (windows).  I have turned them all off before installing.  I think it was a matter of execution engine.  I have no time to fight with LabView, so I uninstalled all LabView!  Then I made a new installation of the DVD.  This works.  I never install a patch of NOR without a week of free time!  In others, ever!  Whenever I do it, it takes me at least a day to get my operating environment!  Thanks for your time.  It is appreciated.

  Best regards

  Rich

• Where can I find the location of the folder where all the updates are stored

  I can not download updates and can't find where the updates are stored in order to change the settings

  brido,

  How to ask a question
   http://support.Microsoft.com/kb/555375

  Additional information required:

  How to view the log of update Windows

  
  

  Click Start, and then click Run.

  in the Open box, type

  %WINDIR%\WindowsUpdate.log

  and then click ok.

  scroll down to the last entries locate codes of error associated with the last attempt of download/install.

  start at the bottom and work your way up to a section , indicating an ERROR, WARNING or FATAL.

  If the appropriate copy and paste codes of errors in this thread with 50 or so * previous * lines in your answer, so someone may be able to help.

  Also check the Windows file called Ko folder * .log

  (* = number of update ie (KB977914) and post the content ofupdate failed. )

  This may even provide clues as to why the update failed.

  How to read the windowsupdate.log file: http://support.Microsoft.com/?kbid=902093

  See the response in this thread message http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/a4aed215-d236-4DA7-8292-81f8d3605976

• Emails lost after the updates installed

  After installing the updates I don't get emails from people telling me they sent me emails to my yahoo e-mail address. I would get at least 100 emails a day and now I get less than 5 per day. What happened to my mail since I installed these upgrades? I'm waiting for email confirmation very important employment opportunities part and possible food and collection of my 401k so I can pay the rent for may. I need help on this issue immediately. Help!

  Hello

  Your question does contain all the required information necessary for us to help you. Please provide us with the following information.

  1. do you use any e-mail like Outlook client, to access your emails?

  2. access your email via Webmail?

  3 you get any error message all send or receive e-mails?

  4. what updates you install, where they update Windows or Office updates?

  You can try to do a system restore to a date before you install the updates and see if that solves the problem. Please refer to the below link for additional information on system restore mentioned:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/what-is-system-restore

  http://Windows.Microsoft.com/en-AU/Windows-Vista/system-restore-frequently-asked-questions

• Skype 4.1 Linux 64 bit - where are the debs install?

  Arch multi for debian packages and 12.04 Oneric currently will not work with reports of 'trouble 'architecture.

  Where is the 64-bit installations that they all seem to be i386?

  Thank you

  True, but to chat with your MSN contacts and get the presence updates you must connect using the liveID credentials.

• Blue screen of death after the update installed at startup upward.

  I have windows xp sp3 after installed updates don't know which ones, because the installed when I stop and 52 of them there I now get a blue screen of death which says:

  Stop: c000007b {bad image}

  The application or DLL? \c:\windows\system32\winsrv.dll is not a valid windows image. Please check this against your installation diskette.

  I can't go to the safe mode get the same error and same with the last known good configuration. I can't even to safe mode command prompt, system, or debug mode recovery still giving me the same error. I repaired windows 3 times already and the same thing happens each time after that some update that I don't know he messes all this. Give me advice. I have antivirus Iola system mechanic. I think just to wipe the entire disk and do a clean install if you do not have anything else to tell me I'll do it, but I don't know if that even the problem will be solved because there seems to be a problem of windows software update. I also notice from the internet explorer 7 installed it stops working a few flashes upwards on you whenever you try to open it up if it's maybe part of the problem too. I do not plan to let internet 7 install go into all this time.

  Install the updates one at a time or 5 at the time may not be a bad idea.  Then when it breaks watch you and see if one of those is eager to replace your winsrv.dll file.

  You said you DO or DO NOT have to System Mechanic configured to run at startup?  Sometimes after installation of the updates, who see the new files (and if they are obsolete), can interpret the new legitimate files to be a threat.  If you could get started and uninstall that (at least temporarily) that would eliminate this possibility of this equation of many variables.

  The Dell has a number of service tag sticker and if so what does it say?  You can search for things by service number

  You should make a bootable CD of XP (no XP media required) Recovery Console.

  You see, Microsoft support engineers won't tell you how to do this either - since there is not an article of KB Microsoft Bing and link to.

  If you have a SATA drive, which will give you another challenge because you need to maybe get into BIOS and temporarily change the disk other than SATA configuration mode so the Recovery Console will be able to see, replace the suspicious winsrv.dll file, change the SATA drive and reboot...

  First, do the XP Recovery CD of Console and if you are able to use a system of work to ensure that the CD you made at least boots (you don't have to "do" something with it), which would be a good thing.

  Here's how:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

• remove the update install Q How to uninstall this stupid thing, the usual method of use of the Control Panel does NOT work

  I tried for hours and hours to remove the program called InstallQUpdater. usually, I go to the control panel and click on uninstall, then find the program, click the program, and then click on uninstall. I the image appears saying "preparing to uninstall" later I program pop up asking if I want to cancel because it is a source of the United Nations identified, I click and wait... .i have tried cleck say the oposie and wait. It seems as it asks me to authorize the installation program must be installed. I don't want and I can't get rid of it.

  Hello

  There is a possibility that it is Adware.

  Read this information about it:

  http://www.ehow.com/facts_7898673_install-IQ-Updater.html

  Try this.

  Use the FREE Revo Uninstaller to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  And I would also do a scan of Malware;

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware, if necessary in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And here's how to go in Safe Mode options; Select safe mode with networking from the list of options:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  See you soon.

• Office Ko missing update in the updates installed, but Windows 7 says it is installed.

  One of my users knew a bug in Microsoft Office 2010, so I installed the good Office Update KB3085604.  Unfortunately, the user still knows the problem of Microsoft Office so I decided to check to see if the update was successfully installed.  When I go to "View installed updates", the KB3085604 of office does not appear. I tried to type in the Installed Updates research and he said: "no items match your search.

  What is strange, is that if I try to re - install the update, it says it's already installed and if you check the update history, it says that it has been installed. But even once, it does not appear in the installed updates.

  I tried to uninstall the update through command prompt using the wusa uninstall and it said that there is no such thing as the update. The computer running Windows 7 32 bit SP 1 and we use Sophos Endpoint Security. Maybe Sophos has played a role but other users of Sophos have been able to install this update without any problem. Any ideas what is causing this error?

  Trying to repair Microsoft Office 2010.

  Select Start, Control Panel, programs and features. Place the cursor on Microsoft Office 2010, right-click, and select Edit. Click on fix and continue. When it is finished, restart your computer.

• Where is the update of Firefox 19.0.1?

  Last night (27/02/13), I had an alert update to Firefox 19.0.1 on my laptop Sony running Windows 8. I installed the update. I don't have this update alert on my desktop of Windows 8. When I checked the site Mozilla today Firefox download is always communicated 19.0. That's happened?

  Firefox 19.0.1 was for Windows 8 only, so it does not appear on our site.

• Moto X 2 Pure Edition - where are the updates?

  I have a MotoX2 Pure edition phone and have not received updates for the lollipop because I got it in December. I'm on 22.21.11 which has its fair share of bugs that I lived with for 3 months. Last month, I noticed that the MotoX2 ATT phones began to receive 5.0.2 and now see that 5.1 is on the horizon, so I wonder where the "updates faster for Pure Edition models" are? I talked to both Motorola and TMobile and here is what I said: Pure phone edition is based on TMO so I will only receive updates of this nature from TMobile (no Motorola, Google or ATT - which is what phone service that I use on this phone). Additional tmobile is not officially support (or sell) the MotoX2 (which I find really weird since the Pure edition is based on TMO codeset) they are neither listed on their list of update of Lollipop (5.0.x)...

  Does anyone else know this or different?

  All updates for Pure edition devices come directly from Motorola. If you are using a version of Moto X XT1095 there was no released update yet for her since 5.0 was sent. The AT & T version (XT1096 I think) brand received an update which brought to 5.0.2 so far. With the release of the update, 5.1 and seeding of this one at POM it is probably good to assume that Pure edition will receive this update. It holds more than 14 000 corrections and changes according to the newspapers, and should be worth the wait.

• at startup the updates install every time. I need help please!

  Whenever I start my computer, it goes in the updates. Then, it does not start correctly and goes through the system restore.  I disabled the update updates, but it still happens.

  I check recent log and nothing is displayed since the month of May this year.

  Can someone help me with this problem.

  Thank you

  Hello

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Use the downloads at the end of this article - note for Vista x 86 versions 32 bit and Vista
  x 64 64-bit.

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.