Where the type of deicide custom step to be

Similar Questions

• Where lives the logic for the types of flow control step?

  For most types of step, the behavior of the type of the step is determined entirely by the configuration of the stage - that is to say, the properties that can be configured in the window type, such as the properties of the step, steps, etc..  But as far as I know, the behavior of the control flow step types (for example, hop, back at the beginning of a block of loop after a late stage) does not seem to be defined by a lower level, flag, attribute or any other configuration item - it seems to be something inherent to the motor TestStand.

  If this is the case, how the TestStand engine knows to provide the functionality for a particular flow control step type?  It runs the appropriate logic based on the name of the step type?  I suspect that this may be the case, because if I create new types of step in copying the types of step ForEach and end without any changes other than to specify the new name for the beginning of the block and end step types, new types of step repeat not the loops as expected.

  Can someone clear this up for me?  Types of flow control step break the model completely define the features by changing the type of step, or I am simply not find relevant configuration items?  I tried to create a new type of end step that allows an expression pre, but it broke my step ForEach (new) type loopback functionality.  Is it possible to do what I want?

  You are right that the engine processes specially the flow control measures. He looks at the name of step type. If you want the same behavior execution, you must keep the original name of type step as a prefix on your step type name, such as NI_Flow_End_CustomizedByMe.

  Also, check out the http://forums.ni.com/t5/NI-TestStand/copy-of-NI-Flow-End-does-not-work/m-p/290170/highlight/true#M88...

  There is the source code that is similar to what the engine makes the steps of flow control. That was the actual code before it moved into the engine. It might be a bit outdated now. I found this on my machine in C:\Program Files (x 86) \National Instruments\TestStand 2010\Components\StepTypes\FlowControl\

• Custom step problem

  I have a number of custom steps (not inherited, no source code) that we use with TestStand 3.0 and 3.5 versions.  I'm trying to import them into TestStand 4.1, but I have problems.  I know that the location of the files has changed under TestStand 4.x.  They used to live in the TestStand folder, now they live in C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.1\Components.  I copied all the DLLs, INI, ICO, files in the correct folders, but some of the measures do not appear in the context menu when you add a step.  I have added custom, four steps two I have visible, two are not.

  The management mode that Custom steps has changed in the TS 4.1?

  Thank you.

  Have you added your pallets of type under C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 4.1\Components\TypePalettes?

  Your pallets of type and the types of step appear in the Palette of Document Type?

  You may also right-click on the palette to insert a step and choose Customize... to update where your step types appear in the Insert palette.

  Hope this helps,

  -Doug

• Is it possible to identify the font information when the type was converted to the outline?

  I frequently receive art where the type was converted into contour... and then a review type needs. The artist remembers that the font has been used rarely, and trial and error will eventually be used to find a similar font. Is it possible that Illustrator retains this information?

  Katrina,

  Alas, no.

  The possibility to implement a special preventive measure was at least once in this forum: electric shock through the keyboard when the user attempts to outline a font without having saved the direct type in the document (the failure because of the countermeasure of the use of rubber gloves is also mentioned) first.

• Creating a type of stage of the "Launcher" which would insert the appropriate step type predefined or custom time edition

  Hello world

  I'm looking for tips, pointers, directions... to be able to perform this operation in TS 4.0 sequence Editor, if it is still possible...

  I am managing a test system with an abstraction of virtual instruments 'home-made' additional layer to IVI classes for instruments that have no defined classes, customization of the sequence editor accordingly for the developers of my Department.

  So basically, when the instrument is IVI, the developer uses the built-in type of stage IIA type and when it is not the case, it uses the types of custom step I developed for this particular category of instruments.

  However there are classes where I both IVI and available specific drivers and I have to use both in the test sequence.

  For example, let's say there are two DC power sources available in the test bench, including a programmable IVI compatible DC power and the other composed of 'blocks' fixed to DC power relay-driven external and you will need to use both in the test sequence.

  I want to be able to do in the sequence editor is the insertion of appropriate during the editing just level type by selecting the power source (by a ring or an enum for example) and if the first resource is selected, it inserts the type of stage IIA, and if the second resource is selected, it inserts the appropriate custom step type.

  Any ideas on how to achieve this?

  Kind regards

  Cyril

  I don't know exactly when you plan this next prompt, but one option is to create a personalized with a custom step step type named OnNewStep. It will be called when your approach is inserted in the sequence. You can then display the command prompt and replace program step custom in the sequence step type based on the selection of the appropriate user.

• Disable the setting custom step Type

  Hello

  I'm developing some types of custom step and I don't want the developer of the sequence to be able to change them. He should be able to access the properties of the step only which are visible through the property browser. I want my guys to appear as types of NI - where everything is disabled for the user.

  This way I can protect my types to get damaged by an adventurous sequence developer and also give him the freedom to design their own tests using the types I give him.

  Is this possible? If so, how?

  Thank you.

  Aditya

  If they are connected as long as developer and not admin, you can change the privileges > configure > change types to false.

• How to get the parameter values of a step type custom when I create file and adding a type of step seq

  I use lv 8.5 and teststand 4.0.

  I did a step type custom and recorded at the MyTypes.ini in pallets of type.

  I specified a default module by opening the properties of the custom step of *.ini type window, then I put some values of the parameters.

  T1) when I open teststand and I add the custom step type manaully in seq file, the labview module parameter values are represented.

  But, if to use file (create and add support prototype stage), the labview module parameter values has the default value.

  Using joint file, how to get the setting custom step type values I put in *.ini?

  Q2) each type of step are automatically by name through the use of LoadTypePaletteFilesEx. When I open teststand and I add the custom step type manaully in seq file, the module is loaded automatically. Inside the attachment, I use a prototype of charge and a fixed path where the module labview is to load the labview module.

  Can I load module automatically without using a prototype of charge or how can I get a dynamic path of type step?

  I solved Q1 for myself by using the mapping tab of the parameter within the configuration to the default module window.

  Everyone knows Q2?

  Thank you.

• "Turn off monitor" in the behavior of type custom step

  Hello!

  Currently in the drafting of the types of custom step based on sequences (default adapter of my type of step is a sequence), I would like to define the right ' off track ' in my step type definition.

  The problem is that this option is not visible in the "default Options" tab... " The only way I found to do this using pre and Post Expression to the value "ThisContext.Tracing = True False'."

  But I don't like using Expressions of pre/Post in my type of stage (I prefer to leave empty for end users).

  Is there a way to do this without the use of Expressions?

  Hi zyl7,

  In your type of custom step, set the property to TS. SData.Trace on 'Off' (without the quotes).

  I hope this helps.

  -Jack

• analyze the custom step

  Hello

  My question is quite simple, is it possible to use TestStand sequence Analyzer to analyze custom steps I developed?

  If it is possible, where can I find tutorials to do this?

  Best regards

  CFOE

  My question is quite simple, is it possible to use TestStand sequence Analyzer to analyze custom steps I developed?  YES

  If it is possible, where can I find tutorials to do this?

  The best place is the help of TestStand:

  http://zone.NI.com/reference/en-XX/help/370052K-01/tsref/infotopics/sa_creating_custom_rules/

  http://zone.NI.com/reference/en-XX/help/370052K-01/tsref/infotopics/sa_creating_analysis_modules/

  There are others out there, but those who are similar to what you want.

  Hope this helps,

• How to create a custom control for a button where the look apply to everyone else but not the Boolean text?

  Hi all

  I would like to create a button custom as a master, so that if I change the look of the master all other buttons are changed.

  I did it with a custom control, such as a 'type strict def' otherwise the look will change , BUT if I do this as a strict type def I can't change the Boolean text more which should be different on each button.

  How to create a master control of a button where the look apply to everyone else but not the Boolean text?

  Steve Chandler wrote:

  I don't think that you can do. I just looked and as I suspected the Boolean property text is read only for strict typedefs, you cannot use the nodes property to change the text.

  As a just solution make it a typedef. When you want to change the open look the typedef and strict rendering, make your changes, then make no strict again. You will need to update the text Boolean yet once for all instances. Kind of pain. This is perhaps something for the exchange of ideas.

  Alternatively, remove Boolean text and replace with legend

• Want to migrate the database (4node RAC) size of 4 TB of 10.2.0.5 at 11.2.0.4 on the new servers where the new type servers Primary (4 nodes) and Eve (4 nodes).

  Want to migrate the database (4node RAC) 4 TB size of 10.2.0.5(8 rompt = 4 prim/4 veille) to 11.2.0.4 on the new servers where the new type servers Primary (4 nodes) and Eve (4 nodes).  So with minimum downtime I have restore and recover again on 11.2.0.4 server must then clone that to create the day before.   Here, my question is can I take 0 backupp level before hand and restore on target (new) then primary at the time to leave the downtime take backup of level 1 of 10g and then retrieve it on 11g (new server) after successful recovery I'll perform clone to form eve of database on the new server. does this strategy work? If it works, can someone suggest me steps how can I need recover with backup after restoring the backup of level 0 on 11g. Like should I upgrade before you retrieve it with level 1 backup or I can update and then recover with the level 1 backup from the old server to the new server.

  Here is former servers of RHEL 5 version and new servers are RHEL 6 release.

  Post edited by: Umair_ali

  1 backup L0

  2 restore L0

  3. L1 and ArchiveLogs database backup

  4. copy BackupPieces L1 and ArchiveLog BackupPieces on new server

  5 CATALOGUE START WITH... to catalog the BackupPieces

  6. TOGETHER until lastavailable SNA / Archivelog + 1

  7 RECOVER DATABASE (should automatically identify the L1s and to apply ArchiveLogs)

  8 STOP

  9 START UPGRADE

  10. run catupgrd.sql

  You should also take care on the locations of the data file, dump, instance settings destinations, all link database from the database, connectivity application etc.

  Hemant K Collette

• PDF fillable where the customer can add text AND change the fonts?

  Hello

  I would like to be able to provide my clients with editable poster templates. I created in InDesign posters, with a large white space in the middle where they can add their own texts, and when they're done, they can send them to the printer. The problem is, I just want to give them - in PDF print quality, so they don't mess up my share of the design (in addition, they are not sufficiently advanced to use indesign or illustrator or something like that).

  I tried implementing a PDF file using a text field, but it won't work. When the customer type in the text field, they will not be able to change the size of font, color, weight, etc.

  Is there some sort of 3rd party plugin that will allow me to create PDF files to fill live where the customer can indeed choose their fonts & things when they fill in their info?

  Thank you!

  Bernd: rich text only allows to apply bold, italic, exposing. It does not allow the user to make the text larger or to change the font.

  When I type ctrl-e in the area I can change the font and the font size.

• I have no cursor blinking in the box where I type

  I have no cursor blinking in the box where I type. If I start typing the whole box moves to the top of the page and you can tap into it then.

  Post a URL to the site, thanks.

• Custom step and the step execution.

  Hello

  I need the solution for access to a stage performance

  The order of execution of a step to start as below.  How can I insert a call custom execution position before step 3 and after step 18?

  Can I create a custom step allow me to insert a function like that call

  1--> Allocate result

  2--> synchronization batch Enter

  3--> check Run for Skip mode

  4--> assessment

  ....

  17--> the Post expression evaluate

  18--> evaluate Expression of State

  Tphan wrote:

  Precondition can be used for dynamic defining the step to skip or fail, but limit to only Boolean

  The statement above is not correct, you can have any expression as long as they evaluate to true or false. Thus, for example, you can have a prerequisite:

  RunState.PreviousStep.Result.Status is "Passed"

  If the expression above to ensure that the step will run only if the previous test succeeded.

  I think that your problem can be solved using preconditions and post actions.

  Take a look at the attachment.

• A custom step of multiple digital limit test | Hide the limit tab

  Hi all

  I am trying to create a custom step of multiple digital limit test. The custom step by itself poplulates the value of the limits of the measure. So I plan on Hide tab limits within the parameters of the step. Can someone guide me on how to do it?

  Thank you

  Prasaanthan

  Make sure that you have checked the box 'Show hidden properties' in the StationOptions > preferences. Otherwise, you will never find the table refers to erik.

  Norbert