Where to configure SNMP on iDrac 8?

Similar Questions

• SNMP with IDRAC questions

  I have Vmare ESXI installed on my Dell server. I tried to installed the package VIb, who succeeded and the dell printer troubleshooting tool can check the SNMP through my Vmware management IP.

  However, I want to use the IDRAC and I set up the string of community using the IDRAC interface but dell troubleshooting tools, but I get the error message

  The SNMP read request failed for the Get community name - test.

  I will be happy if someone can help me on this.

  NB. I read on the forum that there are two options to configure SNMP to IDRAC. I can only find one. If someone can point me in the right direction, that will be great

  Hello

  Have you done the following on the console of the iDRAC to set the name of the community and enabled the SNMP Agent? (For the detailed procedure, see http://en.community.dell.com/techcenter/extras/m/white_papers/20281547.aspx )

  a. connect to the console integrated Dell Remote Access Controller 7.

  b. navigate to iDRAC settings > network > Services.

  c. go to the section of The SNMP Agent .

  d. Select the check box to enable the SNMP Agent.

  e. Enter the SNMP community name.

  f. scroll to the bottom of the page if necessary and click apply.

  Let us know if it helps.

  Thank you

  Vijay

• How to configure SNMP on a WAG200G router?

  Hello

  I would like to know how to configure SNMP on the WAG200G router, but I don't know what 'Get the Community', the 'defined community' and the "trap to" options.

  You can follow this tutorial , hope this helps...

• I have hp elitebook 8440p, I inserted the sim card, but I'm not able to see where to configure the sim card

  Hi I have a hp elitebook 8440p but I did not; KWN how to use sim card option, I inserted the sim card, but now I can't see wher to configure the sim card or use, cos I m unable to see any option, so please help me

  Hello

  The HP EliteBook User guide contains information on what is required to configure the module top mobile broadband in your mobile workstation. Go to the HP Web site for more information about the configuration and activation of the SIM card.

• Where to configure the SCAN address?

  Hello
  
  I'm in the middle of the installation of the cluster of grid infrastructure for Oracle 11 g 2 RAC on AIX 6.1
  
  I had defined the public IPs, IPs private and interconnections in the files DNS and hosts. I do not use GNS because we use static IP, no DHCP address.
  
  during installation, I will ask you the address IP SCAN, I prepared and resolved by the DNS, but I don't know where the configuration
  
  SCAN IP address is not the ping requests but can be lookedup and I get the answer that he
  
  When I put it, in the switch in a Rack or will I choose different installation method.
  
  Kindly advice
  
  Kind regards
  C.

  whatever Rajesh mentioned URL. I think it's the perfect way to set up.

  For the time being you can tent to configure only a single IP SCAN address in the file/etc/hosts in all nodes of the Cluster and try to move forward.

  That very sure, it won't ping until the Configuration of the grid is not complete.

  Sumit-

• Configure SNMP source for the events of HW for IPMI sensors

  Us run Dell hardware and tested OMSA installed on ESXi5 hosts pointing to OpenManage (OME) Essentials for any interruptions SNMP. As indicated in the following Dell FAQ for OME the 9.5 troubleshooting section, to avoid massive amounts of alerts unknown on the server of the OME from our hosts ESXi5 we define the SNMP CIM for IPMI event source.

  http://en.community.Dell.com/TechCenter/systems-management/w/wiki/3265.OpenManage-Essentials-FAQ.aspx

  This article as well as VMware material and KB, any reference to the need to use the vSphere CLI to make this change, which of course works such as documented. Does anyone know if it is possible to make this change via PowerCLI? We do not want to use the vSphere CLI unless it's the only possible way as all the other configuration items that we have implemented kickstart or PowerCLI scripting.

  http://KB.VMware.com/kb/1008065

  http://pubs.VMware.com/vSphere-50/topic/com.VMware.vSphere.monitoring.doc_50/GUID-01D333E8-0A34-4F04-BB6C-D80A5FDA8CC5.html

  I was able to find the key value pair in PowerCLI where EnvEventSource/directions options, but I don't know if those who may be changed.

  If someone knows a way to do this, I would like to know how it is possible.

  Thank you.

  I think I knew that.  It seems that you have to connect directly to the ESXi host nothing to do with SNMP still, but if someone knows a way to avoid this, I'd love to hear it.  But this seems to work at the same time, but would need to change to more than one host at a time.

  ## Script function: Modify SNMP source for hardware events
  ## Usage: Connect to vCenter where host(s) reside, populate constants below and run
  
  ## Host to make changes to
  $strVMHost = "your_ESXi_5_host"
  
  ## Credentials for ESXi host(s)
  $strUser = "root"
  $strPassword = "your_password"
  
  ## Key to change value on (in case there are different key/value pairs you need to change in the future)
  $keySnmpEventSource = "EnvEventSource"
  
  ## New value for above key
  $valueSnmpEventSource = "sensors"
  
  ## Connect directly to VMHost in order to see the HostSnmpSystem object (http://pubs.vmware.com/vsphere-50/topic/com.vmware.wssdk.apiref.doc_50/vim.host.SnmpSystem.html)
  Connect-VIServer -Server $strVMHost -User $strUser -Password $strPassword
  
  ## Get the VMHost .NET View object and select only the HostSnmpSystem object
  $viewHost = Get-VMHost -Server $strVMHost -Name $strVMHost | Get-View -Property ConfigManager.SnmpSystem
  
  ## Get the HostSnmpSystem object
  $viewHostSnmpSystem = Get-View -Id $viewHost.ConfigManager.SnmpSystem
  
  ## Create new empty HostSnmpConfigSpec (http://pubs.vmware.com/vsphere-50/topic/com.vmware.wssdk.apiref.doc_50/vim.host.SnmpSystem.SnmpConfigSpec.html)
  $specHostSnmpConfigSpec = New-Object VMware.Vim.HostSnmpConfigSpec
  
  ## Populate newly created HostSnmpConfigSpec object with current values
  $specHostSnmpConfigSpec = $viewHostSnmpSystem.Configuration
  
  ## Modify desired value for the matching key
  ($specHostSnmpConfigSpec.Option | ?{$_.Key -eq $keySnmpEventSource}).Value = $valueSnmpEventSource
  
  ## Reconfigure the SNMP agent to take the new value
  $viewHostSnmpSystem.ReconfigureSnmpAgent($specHostSnmpConfigSpec)
  
  ## Disconnect from VMHost
  Disconnect-VIServer -Server $strVMHost -Confirm:$false
  

  Let me know if it works for your environment that we not use SNMP in ours, so I didn't do extensive testing.

• where to configure DGMGRL

  Hello

  I have installation just a watch system physics (an active node, one standby).

  Next step will be to configure DGMGRL.

  However, I'm not sure where this.  On one of the two or the nodes (bad idea, I guess if it is defective for Murphy)?

  Or to install on another customer - but that creates a single point of failure once again...

  It is not a production system - VMWare boxes just to learn the 'howto '.

  Thank you

  Christian

  Here's something doc MAA 10 gr 2:

  Enterprise Manager 10.2.0.3 also allows administrators to designate another observer host to protect against events that could cause the first host of observer to fail. This can be easily configured when you create a configuration FastStart Failover using the Enterprise Manager installation wizard. Upon detection of a condition of not supported, Enterprise Manager starts the observer on the host.

• Where to configure clustering: on the web server or a load balancer?

  Hi all

  a few installation questions. I read on clusters and where to set up the pool. My main goal is to reach stickness session, session failover. but I'll ask them later when I clarify below.

  If my installation is

  -> Cluster WebLogic Web server, I need to install the cluster weblogic web server plugin.

  If my installation is

  Balancer load-> cluster WebLogic, I need to configure the LB, cos the LB must meet certain criteria.

  My planned Setup is

  Webserver-> LB-> cluster WebLogic. the weblogic balancing is done at LB. I'll have to set up the LB to balance to the cluster.

  I think I'm NOT configure the weblogic on the correct Web server plugin?

  Configuring the web server is obviously a proxy directly through the lb.

  So my next qn: the configuration to the LB is to balance the weblogic cluster OR a list of all the backend .jsf page server? Assuming that my application launch page is a jsf page. Enjoy your advisor.

  (a) you have little sticky on LB. On the Web server, Weblogic Plugin will take care of permanent sessions.

  (b) Yes, you need to add to your weblogic.xml in the application. There will be no conflict. However, your heap memory usage will increase as you could store session information on two servers.

  "Circumstances and considerations should I need a LoadBalancer in front of my weblogic cluster? --

  The main reason you would use a load balancer is to keep the VIP for your application. He would charge the balance between the weservers. Also usually SSL is stopped at the level of load balancer. It helps you reach cross clutser replication etc... You can read this document... Failover and replication in a Cluster

• Is it possible to configure SNMP or logging remotely on the R8000?

  The stock firmware allows logging of external data?

  As a way secret for the program to install/activate SNMP?

  Or direct the output of logging to an external server?

  Because the viewport of the newspapers little pointless, just doesn't really cut it and go through the journal by email whenever you want to look over is simply absurd.

  There is no support SNMP, for one of the Netgear router machine, in stock firmware.

• where alsb configuration data stored?

  Done alsb implements all database internal to save the configuration data of all services developed in alsb for development environments, staging and production.

  Hi Abhishek,

  Can you point me to any doc that says that.

  As far as I know, ALSB comes with pointbase DB and can be configured to use other databases as well.
  But it does not store the configuration data related services. Configuration is stored in the local filesystem only.

  Other databases can be configured to record etc.

  Let me know if I'm wrong.

  Thank you

• Script to join the domain, the role of configuration, add permissions and activate/SNMP configuration

  So I'm writing a script to install our vSphere hosts to work with our monitoring software.  Right now, it's all done by hand and I would like if possible to automate it.  So far, I came up with this.  I get to step 5 and that's where it fails.  I can get it manually run the Get-VIAccount command, but in the script, it fails.

  These are my steps

  1. connect to an existing host and retrieve role properties.

  2. connect to the new host

  3 join the domain.

  4. disconnect the new host and reconnect with the credentials of domain

  5. get the domain account, role of research/create and add permissions to host

  6. enable and configure SNMP

  7 restart MGMT officers.

  #Variables

  $vmhost = "Host03".

  $domaintojoin = "Domaine.org".

  $domainAlias = "domain".

  # $usernametograntpermissions = "service.account".

  $rolename = 'team - account control service '.

  #Connect to host17 to retrieve the role privileges

  to connect-viserver host17

  #Extract of privileges for the role of vcenter Monitoring Service

  $privsforrole = get-viprivilege-role (get-ferrule-name $rolename)

  Server VI #disconnect

  disconnect-viserver *-confirm: $false

  VSphere hosts #Connect above (enter the credentials of the root when prompted)

  SE connect-viserver-Server host03

  #Join field

  Get-vmhostauthentication - VMhost ctcvsphere3 | Game-VMHostAuthentication-domain $domaintojoin - user %-% - JoinDomain-confirm password password: $false

  credentials of the #disconnect root

  disconnect-viserver *-confirm: $false

  #reconnect with the credentials of domain

  SE connect-viserver-Server ctcvsphere3-user username-password password % domain\username

  #Get domain account and add to the host

  $viAccount = get-VIAccount-DOMAIN-User - ID service.account

  # Get the role

  $viRole = get-ferrule-name $roleName

  If (-not $viRole) {}

  throw the "Role of the creation.

  New-ferrule-name $rolename - Server $vmhost

  Together-ferrule-role (Get-ferrule-name $rolename - Server $vmhost) - AddPrivilege (get-VIPrivilege-id $privsforrole - Server $vmhost)

  }

  # Add permissions on VMHost

  New-VIPermission-Director $viAccount-role $viRole - entity $vmHost

  all VIServers #disconnect

  Disconnect-VIServer *-confirm: $false

  }

  #Configure SNMP

  Get-vmhostsnmp | set-vmhostsnmp-enabled: $true

  Get-vmhostsnmp | game-vmhostsnmp - ReadOnlyCommunity 'SNMP.

  #Restart Mgmt officers

  Get-VMHostService - VMHost $vmhost | where {$_.} Key - eq "vpxa"} | Restart-VMHostService - Confirm: $falese - ErrorAction SilentlyContinue

  Here is my error:

  Get-VIAccount: 27/02/2014-16:03:11 VIAccount Get A general system

  rror occurred: access to the directory error

  C:\ps1\vmware\snmp1.ps1:42 char: 28

  + $viAccount = get-VIAccount < < < < - domain - User - ID SERVICE. ACCOUNT

  + CategoryInfo: NotSpecified: (:)) [Get-VIAccount], SystemError)

  + FullyQualifiedErrorId: Client20_VmHostServiceImpl_RetrieveUserGroups_Vi

  Error, VMware.VimAutomation.ViCore.cmdlets.Commands.PermissionManagement.GE

  tVIAccount

  Get-VIAccount: 27/02/2014-16:03:11 Get - VIAccount VIAccount with the id

  "service.account" was not found using the specified filters.

  C:\ps1\vmware\snmp1.ps1:42 char: 28

  + $viAccount = get-VIAccount < < < < - domain - User - ID SERVICE. ACCOUNT

  + CategoryInfo: ObjectNotFound: (:)) [Get-VIAccount], VimExceptio)

  n

  + FullyQualifiedErrorId: Core_OutputHelper_WriteNotFoundError, VMware.VimA

  utomation.ViCore.Cmdlets.Commands.PermissionManagement.GetVIAccount

  New-VIPermission: Impossible to validate the argument on the parameter "principal." The argument

  ent is null or empty. Provide an argument that is not null or empty, and then try

  the command again.

  C:\ps1\vmware\snmp1.ps1:56 tank: 40

  + New-VIPermission-main < < < < $viAccount - $viRole - entity role

  y $vmHost

  + CategoryInfo: InvalidData: (:)) [new VIPermission], ParameterBi)

  ndingValidationException

  + FullyQualifiedErrorId: ParameterArgumentValidationError, VMware.VimAutom

  ation.ViCore.Cmdlets.Commands.PermissionManagement.NewVIPermission

  The term 'catch' is not recognized as a cmdlet, function, script fi

  the, or an executable program. Check the spelling of the name, or if a path has been included

  DED, make sure the path is correct, and then try again.

  C:\ps1\vmware\snmp1.ps1:57 tank: 12

  + captures < < < < {}

  + CategoryInfo: ObjectNotFound: (catch: String) [], CommandNotFou

  ndException

  + FullyQualifiedErrorId: CommandNotFoundException

  Thanks in advance!

  Dimitar did a nice write-up of this phenomenon and a possible solution.

  See ESXi hosts to join a domain and licensing with PowerCLI

• ESX host SNMP configuration

  I'm about to go crazy trying to understand how to configure snmp on an esx host using Orchestrator.  I see the object for it (VcHostSystem.configManager.snmpSystem), but the value is null when I try to use it.  I used the managed object browser and of course, it appears under the "unplugged" position  The api documentation confirms that this is where I'd go for update this configuration but I can't seem to make this work.  All the research that I show people using one of the line of remote control tools to define.  Can someone help a way that they do with orchestrator?  I guess I could create a workflow that calls for the command-line utils, but that seems barbaric.  I also thought that maybe I could manipulate the XML directly on the host computer, but then again, it seems more like the caveman.  If all goes well, Miss me just something obvious in my attempts to do so.

  Here's my test code:

  var myVcHostSnmpConfigSpec = new VcHostSnmpConfigSpec();
  ro var = new Array;
  trap of var = new Array;
  var destination = new VcHostSnmpDestination();
  destination.Community = "SNMP community";
  destination.hostName = '127.0.0.1 ';
  destination.port = 162;
  RO.push ("read-only");
  Trap.push (destination);
  myVcHostSnmpConfigSpec.enabled = true;
  myVcHostSnmpConfigSpec.readOnlyCommunities = ro;
  myVcHostSnmpConfigSpec.trapTargets = trap;
  System.Debug ("snmpSystem:" + esxHost.configManager.snmpSystem);
  System.Debug ("active snmp?" + esxHost.configManager.snmpSystem.configuration.enabled);
  System.Debug ("read only communities:" + esxHost.configManager.snmpSystem.configuration.readOnlyCommunities);
  System.Debug ("trapTargets:" + esxHost.configManager.snmpSystem.configuration.trapTargets);
  System.Debug ("CS:" + myVcHostSnmpConfigSpec);
  System.Debug ("CS.enabled:" + myVcHostSnmpConfigSpec.enabled);
  System.Debug ("CS.readOnlyCommunities:" + myVcHostSnmpConfigSpec.readOnlyCommunities);
  System.Debug ("CS.trapTargets:" + myVcHostSnmpConfigSpec.trapTargets);
  System.Debug ("CS.trapTargets:" + myVcHostSnmpConfigSpec.trapTargets [0] .community);
  System.Debug ("CS.trapTargets:" + myVcHostSnmpConfigSpec.trapTargets [0] .hostName);
  System.Debug ("CS.trapTargets:" + myVcHostSnmpConfigSpec.trapTargets [0] .port);
  esxHost.configManager.snmpSystem.reconfigureSnmpAgent (myVcHostSnmpConfigSpec);

  This seems to be one or the other of these unfortunate ESXi features that can be managed through a vCenter. So, for each host that you want to manage, you must import the SSL certificate and add the host to the vCO so that such changes. Based on my test script manually to add the SSL certificate and the facilitator to my server of vCO I could set the SNMP parameters as you coded above.

• Configuration of SNMP on Cisco Small Business 300 Series managed switch

  Please can someone help me configure SNMP on Cisco Small Business 300 series switch?

  Thank you

  Hi Anton,.

  Don't forget to activate the service SNMP is first of all: Security > Services TCP/UDP.

  http://sbkb.Cisco.com/CiscoSB/UKP.aspx?VW=1&docid=3b13278d9ef9402a8fef57...

  also, you will find useful documents for configuration etc on our server community kb:

  http://sbkb.Cisco.com/CiscoSB/UKP.aspx?VW=1&docid=183cae2148d445b2a07473...

  Let us know if you have any problems.

  Aleksandra

• The SNMP Configuration failure

  Hello

  I'm trying to configure SNMP v3 on a host running 5.5u1. When I try and set the authentication and privacy I'm greeted with the following error: / tmp/hash_snmp_34068 child process failed, returned exit code = 1:

  hash of esxcli system snmp - raw-secret-auth-hash password - priv-hash password

  Any ideas what could cause the failure?

  THX.

  Sorted. I never put the privacy of snmp. I put privacy at AES128 that sorted an error (/ tmp/hash_snmp_34068 child process failed, returned exit code = 1) which came later in the configuration.

• SNMP Configurations require vCenter?

  I am running vCenter on top a pair of cluster 2 ESXi hosts 4.1.0u3.  I have configured the Protocol SNMP configurations is vCenter to point to our appropriate receiver.

  A few questions come to mind with this, can someone enlighten me please!

  
  

  Although the SNMP configuration is applied in the vCenter settings, they need to be configured on each host ESXi?  If so, how it works?

  On a separate scenario (has nothing to do with the above), I have 2 ESXi hosts running ESXi 4.1.0u3 - but they are not in a cluster and do NOT contain a vCenter Server.

  How can I go about configuring SNMP for each of these individual ESXi hosts?

  Thanks for the help guys prerequisites!

  I remember using vcli for the same. Discover this useful KB