Where to find maintenance utilities after the update of 6.4.0?

Similar Questions

• After the update recent import photos disappearednction. Just white where the photos were. Where can I find them?

  After the update new import photos disappeared during the «two processes» service Just white Windows where the photos were. Where can I find them?

  Got a solution - not ideal because I don't always know what's going on or why...

  So - I just encountered the same problem on my first import since the update.  I have a default to apply the average contrast curve to import.

  Fast/temp fix: in library view, select all the pictures, and then change the preset saved 'default' or 'zero '. or to expand the view, select the same default or reset.  Then change back to the average contrast curve... Might work for any option that you select, but that's what I used.

• unusual warm-up and drainage of battery fast after the update for sierra

  everyone knows unusual warm up their MacBook pro and the draining of battery faster after the update to Mac OS sierra?

  my MacBook 2015 mid pro gets hot when I close the screen and put it to sleep, as well as drainage of battery faster than usual. everyone knows the same?

  Try to use the activity monitor to see where will your battery life.

  1. go to the docking station
  2. Click on finder
  3. Click the menu go
  4. Choose utility
  5. Double-click activity monitor
  6. Click the stack tab

  See you using your battery?

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!

• HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

  Hi people!

  After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

  In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

  I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

  What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

  

  If you need more information, please let me know.

  Best regards

  Ty

  I just tried this driver and I still have sound after 6 resets.

  http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

• Back to my Mac works for you after the update to 10.11.4?

  After the update to 10.11.4 on my Mac Book Air I can't see my other computers at the office. I turned it works on desktop computers (yesterday that he would not allow it to work, but today it is) and the computers can't see each other in the Finder, even with restart Finder. Did someone else with problems of connection/browser with Back to My Mac?

  Hey brycesteiner,

  I understand that you have a problem with Back to My Mac. Let's see if we can get this sorted out.

  I would first start by taking a look at the article below to address the problem with the configuration of the router and the parameters of sharing on the Mac that you connect to.

  Get help using Back to My Mac
  https://support.Apple.com/en-us/HT203907

  Take it easy

• Missing Bootcamp after the update to El Capitan

  Threre was a 100 GB bootcamp partition and a 400GO OSX partition before update Mountain Lion to El Capitan.

  Here's the output of diskutil list after the update:

  

  I could have made the mistake of the reconstruction of the Macintosh HD with DiskWarrior directory to try to solve this problem.

  quick search of TestDisk, we get:

  

  By selecting one of the [Boot] data entries in the MS 6174 is obtained:

  

  Impossible to find all entries containing the SVI. Is there hope?

  Watch disk utility another partition? This partition installed Windows, and if so, it is no longer start?

  Looks like it shows that your hard drive is partitioned because it shows the scheme of 500 GB partition and then only 400 GB for Mac HD. Shows also the 40 GB of data to Microsoft.

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• Can switch 10, I do refresh of system or factory reset after the update of win10?

  I have the Switch 10 with Win8.1 and think to update to Win10, but no can not find information about refresh/factory reset system after the update. I'll be able to factory reset the tablet to Win8.1 or once updated, all refresh/reset options have disappeared?

  (1) I strongly suggest you to create USB recovery media using Acer erecovery

  http://Acer.custhelp.com/app/answers/detail/A_ID/26287/~/create-a-Acer-factory-default-backup-in-win...

  and you'll always come back to windows 8.1

  (2) after 10 windows upgrade, you have 30 days to return, once placed, you will not be able to go back to using 10 integrated windows option but you will be able to do it using the recovery media

  http://winsupersite.com/Windows-10/how-revert-back-your-previous-OS-after-Windows-10-upgrade

• After the updates of Windows 7 computer does not start

  I received a notice from the system Windows 7 updates have been downloaded and available for installation. I selected the installation of updates. After the updates when installed I was in charge to restart. The computer will not start at the top. It tries but stops at a blue screen with a cursor. I tried to boot into "safe mode" and get the same. I booted from my original Windows 7 disc and I went back to my restore point before the update. It appeared to restore successfully but I still get a blue screen.
  What is my next course of action? I certainly DON'T want to format the drive and start again.

  The only thing I can say is that I know that you will not like to hear.

  It is to re - install Windows 7 (do not enter the product key and uncheck the 'Activation').

  Then immediately turn off automatic updates.

  Then, go to the Microsoft Update site and only install one update at a time (make a note of the number KBXXXXXX), restart and check that you do not get the blue screen. Then download the next update and repeat the process until you either find to have installed the offending update or updates without any problem. If all goes well and the problem did not repeat, then you can activate Windows.

  If you find yourself always with the blue screen after a given Update call Microsoft and tell them. If they won't listen, then create a new post on this forum, making reference to the question of the blue screen AND the number associated with the update. Also post the number here if I can do some research on the problem.

  JS
  http://www.PAGESTART.com
  Never be afraid to ask. This forum has some of the best people in the world to help.

• HP ePrint iOS app is no longer find Photosmart C4780 after app update

  I have a HP Photosmart C4780 connected via WiFi to my network, but unfortunately it is not supported by AirPrint on iDevices.

  So, I was working with HP ePrint home & Biz iOS app (version 4.1), which has been very useful to me because he found the printer and allowed me to print from my iPad/iPhone.

  Today I have updated the app on my iPhone to version 5 (now simply called 'HP ePrint' in the App Store) and after the update, the new version is not my Photosmart C4780. I did the Activation thing on the iPhone, as it has been asked to refresh the list of printer on my network in the all tab, but after refresh no printer is found.

  Still I have the old 4.1 on my iPad (and if everything goes well in my iTunes library) and is the printer, I guess, through MSDN because it shows the name specified for this parameter.

  So, the question is: have you abandoned support of Photosmart C4780 under version 5.0 HP ePrint iOS app? If so, why did ' t you this properly informed about the application up-to-date descriptive text in the App Store? A message like "some printers are not supported over ' would be helpul.

  If HP ePrint should find the Photosmart C4700 series printers and it is a question, how to proceed from here?

  Thank you.

  Kenny,

  Thanks for your update.

  I tried restart before (I found this same "action plan" in another thread), but it didn't work, so I removed the app. Later with the 5.0.2 update I installed again the HP ePrint back once again and it worked. However sometimes when I open the app the point in the remains of the gray label and never turns green.

  Now that you mentioned the reboot, I rebooted my iPhone and my C4780 shows the green dot. But I don't know if that'll keep green whenever I need. I will continue to check and see.

  What makes me confident on the app update 5.x, it is that this kind of hassle should never with old HP ePrint home & version Biz (4.x), I keep in my iPad.

  I will continue to work with both versions of the app on my iPhone (5.x) and iPad (4.x) and see how it goes. I really hope that last updated works better, as 5.x is a nice update.

• CS2 problem reinstalling after the update to windows 10

  After the update to Windows 10, I get a message saying that my license file is damaged or something of this nature.  I'm going to connect to the Adobe account and use the old version of registry.  By putting in the license number, it says it is already in use.   I tried to uninstall and install CS2 but get the same result.  How can I re-register?

  Thank you

  Hi tonytiny,

  You cannot save Adobe CS2 products as the CS2 products activation server is no longer available. To use a CS2 application, you must uninstall your existing application of CS2.

  Once done, please download and install the CS2 products from the link below. You cannot reinstall from your original disks.

  Please find the link for more information about the Activation of the server unavailable for CS2 products below...

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Please follow the link below to download the CS2 products. You will also find the serial number as well as the configuration file.

  Download Acrobat 7 and CS2 products

  Please let us know for any further assistance.

  ~ UL

• Kuler has disappeared after the update this morning

  Hello

  I use Illustrator CC French vesion. After the update this morning (10/06/2014), I can't find my Kuler platte more... However, I still have access to the web site.

  Thanks for your help!

  Issouf

  Hi Ben,

  Check the Panel "Color Themes". Kuler has been renamed.

  Thank you best regards &,.

  Rambour

• Today after the update of cloud five programs, all work correctly, however, Lightroom opens, but only develops, gives a message: Please reactivate your membership to enable the module.

  Today after the update of cloud five programs, all work correctly, however, Lightroom opens, but only develops, gives a message: Please reactivate your membership to enable the module.

  What and how do I do to solve this problem? Thanks in advance!

  Hello Julian

  If you still encounter this problem, please try the following troubleshooting steps.

  Solution 1: Sign out of Lightroom 5.5 and then connect back with your Adobe ID

  Solution 2:

  Set the permission to the folder SLStore & SLCache:

  NOTE: Do this twice, once each for the SLCache and SLStore files.

  Mac:

  • Use the Finder to navigate to/Library/Application Support / Adobe / SLStore or/Library/Application Support / Adobe / SLStore.
  • Control-click on the folder and choose read information.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Set permissions:

  System: read/write

  Admin: read/write

  Everyone: read/write

  • Click the gear icon and select apply to closed. Close the dialog box for information.

  Win 7 / 8 to win:

  SLStore: ProgramData\Adobe\SLStore
  SLCache:

  Win 32 bit: program files Files\Adobe\SLCache\

  Win 64 bit: Program Files (x 86) \Common Files\Adobe\SLCache\

  • In the file Explorer, right click on the SLCache or SLStore folder, and then select Properties.
  • Click the Security tab and set the permissions:

  Administrators: Full control

  Power users: all except extraordinary and a total control

  System: Full control

  Users: Read and extraordinary

  • Click on advanced and, if requested, accept the (UAC) user account control elevation prompt.
  • Click on the owner tab, select administrators and click on modify.
  • Select Replace owner of subcontainers and objects. Click on apply and then click OK.
  • Click the permissions tab, and then click on change permissions.
  • Select Replace all permissions of child object with permissions inheritable of this object. Click OK, click Yes.
  • Click OK, and then click OK in the Windows Security dialog box. Click OK to close the advanced security settings dialog box.

  Suggestion 2: Rename the SLCache folder and relaunch Lightroom 5.5

  We have followed this issue of Lightroom. Please let me know what solution has solved your problem.

  If these solutions do not solve the problem for you, let know us.

  Thank you

  Scott

• After the update of the Mavericks, I'm not able to sync audio in a flash animation.

  Hello

  After the update of the Mavericks, I'm not able to sync audio in a flash animation.

  I did:

  1 has created an animation

  2 Adding audio to the timeline

  3. Sync selected in the sound Properties window.

  According to what I've done was to adjust the animation to the sound and you press 'enter' plays the audio, it actually creates a noise.

  Hope you guys have my problum

  Please notify.

  Kind regards

  Rabi Raja

  The new update (version Flash Pro CC - November 2013) which has a fix for this 10.9 OSX sound hum issue is now available for you. This update of Flash CC will update your version of flash to 13.1.0.217.

  You can update the application Adobe Creative Cloud or Flash Pro CC help-> Update menu.

  You can find more information about the update: http://helpx.adobe.com/flash/using/whats-new.html

  Thank you

  -Reynaud