Where to get Hewlett Packard LaserJet 4 Plus - C2037A Toner?

Similar Questions

• where to get the hp laserjet 6l pro printer driver for windows 7 32 bit

  where to get the hp laserjet 6l pro printer driver for windows 7 32 bit.

  or if not is there a generic driver that will work for hp laserjet 6l pro printer in a 32-bit windows system 7.

  My Windows 7 Professional 64-bit system has a built-in driver (provided by Microsoft) for HP LaserJet 6 L printer; I guess that the 32-bit edition may also provide a driver.

  Note that the driver can only appeared after the list of drivers in the Add Printer dialog has been updated by clicking the Windows Update button in this dialogue and in the meantime (maybe several minutes) for drivers to download and list to be filled again.

• Problem with Hewlett-Packard-HP-LaserJet-Professional-M1214nfh-MFP

  Nice day!

  I have a problem with Hewlett-Packard-HP-LaserJet-Professional-M1214nfh-MFP, on the display is "no chain online.

  and not print certain pages. What is it?

  I'm sorry that you are experiencing this issue. I have seen this question several times here. It seems that the firmware update is the problem.

  Here is a link that you can follow to answer this question. Choose your operating system and click NEXT. Go to the FIRMWARE and download it.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=4075462&

  Let me know if it helps.

• Unable to get sound from my speakers on desktop Hewlett-Packard pc7-1010.

  Unable to get sound from my speakers on desktop Hewlett-Packard pc7-1010.

  Hi Judith,

  I suggest to refer to the article and follow the steps. Here is the link for your reference.

  No sound from speakers (Windows 7)

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c01884922

  Check if the speakers are working correctly in Device Manager.

  To do this, follow these steps:

  a. on the desktop, press the Windows key + R and type devmgmt.msc and press enter to open the Device Manager.

  b. develop sound video and game controllers and right click on the driver.

  c. select Properties , and then check to see if the device works properly under Device Status.

  Is there a yellow triangle with an exclamation mark inside, then it indicates that there are some problems with it.

  Reference:

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-in/Windows7/tips-for-fixing-common-sound-problems

  Let us know if the problem persists. We would be happy to help you.

• Windows 7 and HP LaserJet 4 Plus

  I have a new laptop with windows 7 and a printer LaserJet 4 Plus old (but very reliable).  I managed to download drivers from the HP site, but it still won't print.  I get no error messages, just nothing happens when I try to print a document or test page.  I have to change something in my settings?

  There are three areas major problems installing a Laserjet 4 in Windows 7:

  • Ports.  The Laserjet 4 and its derivatives have a standard parallel port, but most of the Windows 7 machines no longer have a parallel port.  The most common solution is a USB-parallel conversion cable.  This can be problematic, because many of the converter cables do not support Windows 7.  [Edit - here marked positions have the models of cable converter in the forum users has reported as working in Windows 7]. In addition, most cables have no documentation (or even a brand name) makes it difficult to solve problems.  The converter can provide a parallel port simulated as LPT3: or it may be a port USB001.:  Another option with the Laserjet 4 would be adding a JetDirect card that would provide a network for the Laserjet 4 port.  This will require the Laserjet connected to a router and would provide access network on multiple computers if you wish.  A typical JetDirect card for the Laserjet 4 is shown here.
  • Drivers.  The Laserjet 4 drivers (and 4 M and other derivatives) are sent through Windows Update.  If Windows Update is enabled (as described in the method of step 2 here in the section "configure Windows Update for"...) you may be able to simply plug in the USB cable and install the driver correctly.  If not do the following: click on start Orb, devices and printers, add printer, and then select the appropriate port.  When the list of printers, click Windows Update.  It will take several minutes for the list to repopulate, when it is finished the Laserjet 4 series printer won't be available under HP (Hewlett-Packard).
  

• LaserJet 4 Plus: installation of LJ 4 + printer in Windows 10

  I have a PC with Windows 10.  It was working fine with my LJ 4 + printer using a TCP/IP connection. I had problems with the PC, so back up my files and reinstalled a fresh copy of win 10.  Now I can not find a driver for the LJ 4 + on the web that works with Win 10.

  There is a thread that deals with this problem but using a parallel port connection, and I want to use the TCP/IP route.  I know that the number of TCP/IP.

  My question is in two parts:

  (1) does anyone know where I can get a driver HP LJ 4 + without having to download crappy software to sites that try to rope me?  This driver - if available - work probably even if originally designed for Win 7 or an earlier version, because it worked after that I initially put updated my PC to win 10.

  (2) If this is not feasible, then are there any HP LJ printers available on the HP list on 10 win that work with the same codes as the LJ 4 +?  for example: HP LaserJet 4350 or 6 L or something like that?

  This LJ 4 + maybe 20 or 25 years, but it is a beautiful beast of burden and should not replace.

  My Professional 10 64-bit Windows system has a driver for printers LaserJet 4 and LaserJet 4 Plus :

  

  You may need to click the Windows Update button in the Add Printer dialog, then wait (possibly several minutes) while additional drivers are downloaded, until the list is filled again.

  Of course, I have no idea if this driver is not working properly, or if it will offer all the features that you can.

• Hewlett Packard HP Compaq 8710: DRIVERS FOR MY HP Compaq 8710p Hewlett-Packard

  System serial number: (deleted content)

  I just installed windows 10 home 64 bit on this laptop and cannot very well the drivers for the following items:

  PCI serial port

  PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C & REV_0C

  PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C

  PCI\VEN_8086 & DEV_2A07 & CC_070002

  PCI\VEN_8086 & DEV_2A07 & CC_0700

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C & REV_0C

  PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C

  PCI\VEN_8086 & DEV_2A04 & CC_078000

  PCI\VEN_8086 & DEV_2A04 & CC_0780

  I was everywhere on your site and found the driver for this computer page.  Installed all the drivers and have narrowed it down to these two left.  It seems that this laptop is a business laptop at the same time.  It has a mooring on the bottom port.  I also have been all over google and still can not very well the drivers for it.  Please give me a link to get the drivers.  Some of the links I've tried in the forum do not work.

  Also if someone knows something about an update of the bios for this computer would be helpful also.

  Hewlett-Packard HP Compaq 8710p F.0D

  I ended up getting on a live chat with a person who, after several trys, found the right driver.  I don't remember the name of the file.  I also got a lot of response from the HP support team.  Thank you for that.  They said they want to ensure that the driver is available on the Web site.  Pending.

  PCI serial port

  PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C & REV_0C

  PCI\VEN_8086 & DEV_2A07 & SUBSYS_30C3103C

  PCI\VEN_8086 & DEV_2A07 & CC_070002

  PCI\VEN_8086 & DEV_2A07 & CC_0700

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C & REV_0C

  PCI\VEN_8086 & DEV_2A04 & SUBSYS_30C3103C

  PCI\VEN_8086 & DEV_2A04 & CC_078000

  PCI\VEN_8086 & DEV_2A04 & CC_0780

• updates failed every night for Hewlett Packard Imaging printing HP Photosmart 6520 series NULL

  Since I have my printer photosmart 6520 02/12/2012 every night he's trying to update Hewlett Packard photosmart HP 6520 series print NULL Imaging... .and it fails every time.  I have a desktop HP P 7 1010 and since I got a new printer, I have an exclaimation point on my computer and it says the problems and when you do it it's is not drivers and it shows NO FIXED.  When you close the session at night, he tries to update the NULL characters again and it fails every time.  I spoke with people from your service many times for more than an hour and they can't solve the problem.  Help, please

  I did some research on the problem of another user, and looks like it's just a ghost update.  Basically, an update 'ghost' is an update that was for the device, but unit has newer drivers which causes the update failing to keep.  The only thing you can do is to hide the update, or ignore it.  Windows will continue to try to push it, but your printer does not need it.  If she didn't need the update, it would install right.  You can find the thread where I helped another user below.  I hope this helps.

  I can't update HP Imaging Null Point HP Desktop 3520 on computer laptop operating system Windows 7 error 80070490

• Hewlett - Packard HP Compaq 6000 Pro MT PC memory problems

  I have a few Hewlett-Packard Compaq 6000 Pro MT of the HP PC I want to make a memory upgarde. At the moment the memory installed on each of them is 2 GB Micron 8JTF25664AZ-1G4D1 - 2 GB DDR3 - 1333 DDR3 SDRAM (8-8-8-22 @ 609 MHz) (7-7-7-20 @ 533 MHz) (6-6-6-17 @ 457 MHz) (5-5-5-14 @ 380 MHz). I bought 2 different brands with the same specification that Corsair XMS3 4 GB 1x4Go memory SDRAM Desktop DDR3 1333 Mhz DIMM 240-pin CL9 and Kingston HyperX Blu 4 GB of RAM DDR3 1333 MHz DIMM 240 pin CL9 memory generic. When mounting this new memory I get the error message sound for faulty memory. Memory have been tested on the brand of the other computer and it works fine.

  Can someone tell me what I will do in this case? I updated the BIOS as well, but still no change.

  Kind regards

  Patrick

  I not really much information but what I have found, here's a thread @Tom in the same direction as your ad material .  It shows the same symptoms as published at the end.  This person has used BLS2KIT4G3D1609DS1S00, which is the FOLLOWING.  Found on AMAZONandEWEGGN.  Also to MICROCENTER.

  Motherboards are picky when using RAM, so use what is known to work.

• The Hewlett-Packard 786 7 v01.02 BIOS update

  Hello

  I installed a nvidia geforce gtx 560 card ti graph in the workstation HP xw4400 of my son as a Christmas gift, and I get the following error message:

  "Your computer's system firmware includes enough information to set up and use this.

  My understanding is that I need to update the BIOS, but I can't find an update for Hewlett-Packard 786 7 v01.02 on this site. I've attached a screenshot of system information.

  Thanks in advance for your support.

  The XW4400 is currently in the BIOS v2.07 Rev A, 8 December 2010 , but the history tab provides no story at all... so I can't find the old versions of BIOS and as such can't see if it's OK to jump directly from v1.02 to v2.07 without problem...

  But the tab notes relase v2.07 includes following:

  This package contains the system BIOS (BIOS family 7 786) and BIOS image the and remote flash utility for the HP xw4400 workstation. These utilities can be used to restore or update THE system BIOS. System BIOS is the operating system
  independent.

  If the BIOS linked above is for your XW4400 that uses the BIOS 786 7 family...

  But please note that the XW4400 has only updates for XP & VISTA and not Windows8. So the XW4400 updates may or may not work as expected when it is used with Windows 8. Both such and especially with a BIOS update that can be risky, I won't use the method of updating windows (HPQFlash) flashing the BIOS from version HPQFlash may not be completely compatible Win8... Instead, I would like to use the 'flash-BACK' or "BIOS CD" methods.

  You can learn more about the different methods of updating BIOS by looking at all the README files in sp51215.exe. You can either run sp51215.exe to unzip the contents of c:\swsetup\sp51215\ (but do not perform a bios update, just close the tool) or 7-zip to directly view the content of sp51215.exe...

  [edited to add following]

  Some other info on your error code 35 can be seen here and here.

  Seems that a pilot unit 35 error code can be fixed with a BIOS update, but only if the manufacturer has taken the trouble to make the necessary changes to properly allocate resources to the card...

  As a species at HP by doing as little work as possible, my still under warranty Z210 running Win7 Pro 64 bit has issues with Estate HDD support. The last driver from HP TSRI is version 10.6.0.1002, which plays well with my hard drives Estate because they appear as removable devices... Last iRST driver Intel 13.2.4.1000 does not support the "cougar point" such chipset used in my Z210 and causes weird problems when I Estate connected HARD drive (and sometimes when not connected)... But Intels TSRI version 12.9.0.1001 driver supports chipsets "cougar point" and so I can finally esata hard drive appears as removable devices...

  Unfortunately, HP has not bothered to update their drivers for centuries and they stay with a 10.6.0.1002 defective TSRI pilot... As you seem, HP wont always do the necessary work, and it's on a support and still under warranty machine... I call it "HP." Support '...

  The update of the BIOS may or may not help your situation, but in all cases, you have still some problems with drivers and the Windows 8 to settle as the XW4400 was never certified for Win8. You may need to perform a job detective to ensure that drivers, especially the chipset drivers, used during the Win8 installed and updates post install actually support the hardware itself... He is a guy to know what is the problem that the documents appear to be getting dumbed down and therefore, you will need to do a lot of reading...

  Otherwise, you could try to install a different generation or make card but a bike may have been a more easy Christmas gift...

  See you soon...

• I plugged a Linksys router for my Hewlett Packard desktop computer, it shows that it is connected with great resistance, but it won't let me connect to the web.

  I connected the router to my computer desktop Hewlett Packard, it shows that it is connected with great resistance, but it won't let me connect to the web. I also have a mid/fi through Verizon set up on this computer, but I have recently installed Magi jack more and it uses far too much data for the MiFi. What should I do to fix this?

  Hello

  ·         What is the error message or the error code that you get when you try to connect to the Internet?

  ·         What is your Linksys router connected to an Internet service provider?

  ·         Were there any changes made to your computer until the problem occurred?

  ·         What version of the Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  To solve the problem related to the Magic jack plu and MiFi Verizon:

  I suggest you to contact Magic jack support. See the link below.

  http://MagicJack.com/customercare.asp

  Contact Verizon support. See the link below.

  http://support.verizonwireless.com/CLC/

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• Assistant product Hewlett packard has stopped working

  After removing a nasty virus/Trojan horse of my system, I get a dialog box saying "Hewlett packard product Assistant has stopped working" shortly after the opening of the session.  How to solve this problem?

  Your welcome,

  If you upgrade to 7 product Assistant will not work, it has been replaced with HP support assistant, which is the current HP software for monitoring and troubleshooting of the computer.

• Hewlett-Packard HP Pavilion dv6 Notebook PC

  Hello

  I have a small problem with my laptop.

  My warranty has expired and my HD stopped working.
  Where can I find the drivers for my laptop? When I can´t use recovery :-(

  Can someone send me a link with operational pilots please? :-) Thank you very much

  video cards:
  ATI/AMD Mobility Radeon HD 4200 (RS880M) [Hewlett-Packard]
  ATI/AMD Mobility Radeon HD 5450/5470 (PARK PRO/XT GL) [Hewlett-Packard]

  Motherboard:
  Motherboard model: Hewlett-Packard 1441
  Motherboard Chipset: AMD M785 (RS880M) + SB810/SB850

  Name of the processor: AMD Athlon II P340

  Audio:

  Audio adapter: ATI/AMD SB800 / Hudson - 1 - High Definition Audio Controller
  Audio adapter: ATI/AMD Cedar/Park/Robson - High Definition Audio Controller

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5032237

  Here are the drivers for your PC

• Error message 1606 could not access network "0,0, Hewlett Packard" location

  Hello group,

   

  The message, Error Message 1606 object, could access the network location "0,0, software | Hewlett Packard' was received when I installed a new printer D1660 accompanied by an error report "http:www.hp.com/support for troubleshooting information about"Fatal Error"and"MSI. " HP Software Update. I have also tried to run the "HP" update and received only the Launcher program (HPUSETUP) Setup that would not go.  The printer works OK.

   

  Please help me to get this software. I tried to go online to support people, but they don't seem to know how to solve the problem.

   

  Thank you

  john_01

  I think I should move it to another location. The CD & DVD spot seems not to fit my problem. Please Blons this problem.

   

  Thank you

   

  john_01

• Operating instructions for Hewlett Packard OJJ4500 washer version 10

  Where can I find Instructions for use of Hewlett Packard OJJ4500 washer version 10

  Hello

  Please, try the following steps and let me know what happens:

  1. Open Control Panel > Add / Remove programs.
  2. Locate Flash from Adobe / Macromedia Flash, select it and click on uninstall.
  3. Install the latest version of Flash by using Internet Explorer (a different browser can only install a plugin for the browser) here
  4. Insert the installation CD. Close the installation windows.
  5. Open my computer, right click on the driver CD, and then click Browse.
  6. Enter in the installation folder.
  7. Enter the folder of SolutionCenter.
  8. Right-click SolutionCenter.msi (can be identified by its other icon) and choose repair. Aprove that any error or prompt until Setup is complete dialog box.
  9. Restart the computer and try running the Solution Center once again.

  Kind regards

  Shlomi