HP Pavilion p6 - 2176 s: install Windows 7 on SSD without disc

Similar Questions

• K320: how to install windows on a SSD?

  To speed up my system, I bought a 64 GB SSD. The idea was to install windows 7 64 on this disc and the same boot from that. HARD original (1 TB) disk is intended to use for data application only.

  I added the SSD successfully to my system, but it seems impossible to install windows and make it bootable? I can't use recovery tools because my original system is also longer than 64 GB.

  My preferred plan is to unplug the HARD drive and start with the SSD from scratch (so if there are problems during the installation, I can easily switch back to my old system).

  Any ideas how to proceed?

  Thank you

  budo_flieger

  At least I had to reinstall windows on the HARD drive and transfer it to SSD. This link describes how: http://www.com-magazin.de/praxis/detail/artikel/windows-7-auf-ssd.html

• How can I enable AHCI in dv7 6199us? And install windows on a SSD?

  Hello!

  I got help.

  How can I enable AHCI in dv7 6199us? And install windows on a SSD?

  Intel based computers, like yours, are usually set to "RAID", which is a superset of "AHCI". Basically, if the BIOS won't let you choose between "IDE mode", "AHCI" and "RAID", leaving in the RAID led to you everything done "AHCI". In this case there is no need to activate the AHCI, as RAID will support an SSD anyway.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• I need to install my hp officejet 4500 without disc

  I need to install my hp officejet 4500 without disc

  Hello everyone, welcome to the Forums

  I noticed this thread for you all in need of the drivers for your Officejet 4500 and I want to help!

  There are three models of the Officejet 4500 so I would include the driver for each other information in order to cover all the. Below I will give you links to download the drivers and software for your model of JO 4500.

  step 1: Determine which model of 4500 JO you. Click here to help you find the model number:

  How can I find my model number?

  Here are 3 different models:

  • HP Officejet 4500 all-in-One Printer - G510g
  • Printer HP Officejet 4500 All-in-One-Office - G510a
  • HP Officejet 4500 - G510n wireless all-in-one printer

  step 2: Click on your model to download and install the driver and software. You will need to choose your operating system, then click on 'Next' and then you choose 'Pilot' and download:

  1. HP Officejet 4500 all-in-One Printer - G510g drivers

  2. HP Officejet 4500 all-in-One printer - G510a drivers

  3. HP Officejet 4500 Wireless all-in-One Printer - G510n drivers

  I really hope this helps you with your driver and software installations!

  All the best,

• HP pavilion g6-1159sa: after installing windows 7 home prem 64 bit disk a hard nine, I can't get internet connection

  Hi Please help me im not witty but here's PCs. I have a hp pavilion 1159sa g6, product no.-ls294ea #abu

  I had to install a new hard drive for my laptop I did without any problem - the hard drive was the easy bit. then I had to install microsoft windows 7 Home premium 64 bit (clean install) I've done after browsing the web on how to exactly to install windows 7 using a guide step by step useful, I found, all that has happened to the plan. but after the installation, I could not without an internet connection, the ethernet cable wireless or directly using the router.

  im guessing that I have missing drivers? & it is were im stuck! as I said im a complete Newbie, so I would really appreciate your help to try to connect again. I use a different computer, so I can download the drivers, I need usb key, but I don't know what drivers :-(

  I look forward to hear from you, but please explain in simple terms on how should I proceed, thank you very much for reading, I hope you can help I am desperate.  Thanks again.

  You are the very welcome.

  Here are links to the drivers you need...

  network controller:

  This package contains the installation package driver for Ralink Wireless LAN to laptop models controllers that are running a supported operating system.

  File name: sp56942.exe

  Ethernet controller:

  This package contains the Realtek driver local area network (LAN) that allows the NIC (NIC) Realtek chip in the notebook models that are running an operating system supported.

  File name: sp55031.exe

  PCI device:

  This package contains the driver that allows the Realtek card reader in laptop models running a supported operating system. The card reader allows users to read or write to removable storage cards supported, which are typically used in digital cameras, digital music players and cell phones.

  File name: sp55030.exe

  Simple PCI communications controller:

  This package provides the driver Intel Management Engine Interface (MEI) for the notebook models and operating systems. The Intel Management Engine Interface allows communication between the host operating system and the Intel Management Engine firmware.

  File name: sp52795.exe

  In addition, don't forget to install the graphics driver.  A missing graphic driver normally does not appear in the category other devices.  If a PC does not have graphics drivers installed, under the category of device display cards, there will be a device named Standard VGA adapter if the graphics driver must be installed.

  Your model, you should see an Intel HD graphics adapter.

  If you see a Standard VGA card, then you must install this graphics driver...

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp55027.exe

• HP PAVILION 15-00B002TU: cannot install Windows 7.0 64 bit on Hp Pavilion i3 model 15-00B002tu

  Hello

  It has to do with my Hp Pavilion model I3 i5-00B002tu, which came with pre-installed 8.0 Win, the problem is that Iam trying to 7.0 64 bit Windows support USB, but at the end of the installtion it gives me the error 'installing Windows could not configure windows to run on this computer hardware', I tried to load drivers of "'https://downloadcenter.intel.com/download/22194 ' but the problem persists" I need to install win 64 bit 7.0

  Please help me to install

  Thank you

  Hello:

  The Intel link you posted does not work, so I don't know what you've tried.

  See if it works...

  Download the drivers from this link below (first listed file - 64-bit).

  https://Downloadcenter.Intel.com/Detail_Desc.aspx? AGR = Y & ProdId = 2101 & DwnldID = 23060 & keyword = Intel + Rapi...

  Extract (copy) the files on a USB FlashDrive without all records.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and I hope, will install W7.

• HP Pavilion Notebook e033ca 17: installing windows 7 on a windows 8

  Hey if I have the HP Pavilion Notebook 17-e033ca and I am very satisfied with windows 8, so I installed windows 7 but if you know the laptop it does not so I searched on youtube on how to get windows 7 on it and eventually remove all. now, I got windows 7 but have no drivers. I looked for the drivers and tried to install, but they do not work the more likely cause they don't work with windows 8. is it possible that I can save this computer and have widows 7?

  Hello

  Installs:

  Driver and Intel Chipset Installation utility

  http://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61428.exe

  Intel video driver
  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61997.exe

  Driver Intel Management Engine components

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63929.exe

  RALink 802.11 b/g/n
  http://ftp.HP.com/pub/SoftPaq/sp61501-62000/sp61580.exe

  RALink Bluetooth 4.0
  http://ftp.HP.com/pub/SoftPaq/sp59501-60000/sp59632.exe

  Realtek Ethernet
  http://ftp.HP.com/pub/SoftPaq/sp63001-63500/sp63213.exe

  Intel USB 3.0 driver
  http://ftp.HP.com/pub/SoftPaq/sp61001-61500/sp61293.exe

  Synaptics TouchPad Driver
  http://ftp.HP.com/pub/SoftPaq/sp64001-64500/sp64284.exe

  Driver Audio of IDT high definition (HD)

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63940.exe

  Realtek PCIe card reader
  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63708.exe

  HP ProtectSmart hard drive protection

  http://ftp.HP.com/pub/SoftPaq/sp63501-64000/sp63786.exe

  Kind regards.

• Pavilion model 11-n001sa: installing Windows HP pro on the HP Pavilion model No. 11 - n001sa

  I replaced the original hard disk, it was windows 10 installed.

  This small laptop is idea for my Renault Clip software, so we need to install Windows XP pro.

  I tried different setting in the bios, XP is listed, theres so no reason for it not install it!

  Using windows XP pro sp 2 & 3 installation disc, but keep the blue screen dreaded towards the end of the installation.

  Come on HP, I need your advice please.

  Hello:

  There is a very good reason that XP does not install.

  Intel did not provide any sata ahci drivers for the chipset that has your laptop.

  That's why you got the BSOD.  XP cannot find the hard drive.

  The latest processors from Intel-based notebook chipsets which had support for XP have laptops with the 7 Series chipsets.

  Not to mention the fact that you wouldn't find any graphic or wireless drivers for XP even if you can get it (that you can't) install.

• You can install Windows on a Mac without an optical drive

  Hey, I have a Mac end 2011 a friend gave to me and he said it was broken. I realized that it was just the SATA port on the motherboard, so I pulled out the optical drive and I put an SSD in it. Now I want to install Windows but Mac says that I am not allowed to because I don't have an optical drive. I tried Abu tools and many other shippers of EFI boot, but none of them does not seem to work! Please help me fast! I am computer LITERATE, so no response even if it is complicated would be very useful. THX

  Have you tried the Applications/Utilities/Boot Camp?

  You can run Windows in a virtual machine, which saves having to restart to Boot Camp. This allows you to access boot Windows and Mac OS.

  Parallels

  VirtualBox

  VM fusion

• Installing Windows XP on M400 without original CD and floppy drive!

  Hello
  I bought the Portege M400 without any CD, only with the product key. IAM having difficultied install Windows XP SP2 from 2005 tablet edition while he asks driver Sata.

  I managed to create the installation with the driver (ts3raidx.exe kr10i.sys) disc for installation can see the hard drive and the first step of the installation is successful.

  But after the first reboot Iam to STOP message 0x0000007B (apparently Inaccessible Boot Device - of the means, but I can not see the message).

  IAM not sure about a few thinks:
  (1) the exact model of my laptop. At the bottom is only the label Toshiba Portege M400. But I have CPU T5600 1, 66 GHz (or 5500 do not know now) that I can't find in any specifications so Iam not sure if Iam using the correct Sata driver.

  (2) the way I've included pilot in the installation of Windows XP. I did it according to this article http://www.pcstats.com/articleview.cfm?articleid=1703&page=1 but ignoring things of unattended Setup.

  I have also tried Kr10n driver, but it does not at all. First step of the installation has not been successful. The drive cannot be seen.

  Could someone help me please?
  Download the original installation CD of anywhere?

  Thank you very much!

  Petr Varadinov (CZE)

  You n t need the SATA drivers but the RAID drivers!
  The Portege M400 PPM40E supports RAID functionality and you must install the RAID drivers first, before you continue the installation of XP!

  The RAID drivers might be installed from external FDD USB drive connected. The Vista operating system allows the installation of the USB!

  The RAID drivers must be published on the page of Toshiba. To take it!

• Install windows on a SSD

  Hello

  I just got a new SSD. I want to replace my HARD drive with it and install Windows on it. I don't know how to do this. In Acer eRecovery Management, it automatically installs windows on the HARD drive. I'm not of course. I don't have more than one windows installation cd. How can I do this?

  Thank you

  It finally worked!

  Here's what I did:

  To change a disk partition table GUID on a disk to MBR by using the command line
  Back up or move all volumes on the disk basic GUID partition table (GPT) you want to convert a master boot record (MBR) record.
  Open a command prompt and type diskpart. If the disc does not contain any partitions or volumes, go to step 6.
  At the DISKPART prompt (right-click Guest, and then click Run as administrator), type list disk. Note the number of the disk to be deleted.
  At the DISKPART prompt, type select disk .
  At the DISKPART prompt, type of cleaning.
  ImportantImportant
  Run the clean command deletes all partitions or volumes on the disk.
  At the DISKPART prompt, type convert mbr.
  Once complete, type exit and return to the Windows installation.

  Thanks for the help everyone!

• I replaced my hard drive with a larger. How can I install Windows XP in it without the disc?

  My computer is old and the hard drive is full, I installed an additional hard drive, now I need to install Windows XP on it and I don't have a disk to do so.  So how can I do?

  I have an old computer and an old hard drive which is full.  So I installed an additional hard drive and need to install Windows XP on it.  I don't have a Windows XP disc for Ho w can install it.  The computer came with a disk, I downloaded it on the computer.  I can't find my code to get the download, so I was wondering how I can get the load down with it?

  Hello

  "The computer came with a disk, I downloaded it on the computer.

  You have a retail XP license?

  If that is right, or the other of these key research programs use to find your product key.

  http://www.Belarc.com/free_download.html

  http://www.magicaljellybean.com/KeyFinder/

  And if you look on the new Hard Drive manufacturer's Web site, they should provide software to "clone" your operating system currently installed through to the new hard disk.

  And here is the other free programs of cloning (PC Backup).

  "EaseUS Todo Backup free"

  http://www.TODO-backup.com/products/home/free-backup-software.htm

  "Download Backup & Recovery 2012 free FREE!

  http://www.Paragon-Software.com/home/BR-free/download.html

  «Macrium Reflect FREE Edition»

  http://www.Macrium.com/reflectfree.aspx

  See you soon.

• Install windows 8.1 lost without recovery partition

  Hello?

  Is this possible?

  I have an Acer Aspire 5742 with 3 partitions, the normal partition, the recovery partition and system reserved. (with windows 7)

  I want to install Windows 8.1, but I don't want to lose my recovery partition because in the future if I have problems, I can restore windows from there.

  Thank you!

  Hi kkik

  Yes, the 13,00 GB partition is your recovery partition. Everything is fine!

• T61p: Install Windows XP Corsair SSD-> "no drives found".

  Lenovo T61p

  I want to install Windows XP SP3 on a new Corsair X 64 SSD. The drive is recognized in the BIOS and the BIOS diagnostic program reports also no errors.

  But the Windows installation stops with the error message "no drives found". I've already put control SATA Mode "compatibility"!

  Any ideas?

  Christian

  Hello Ford,

  Thank you very much for the detailed help. I've fiddled around with the BIOS, some settings and whoops IMO all of sudden the drive was recognized. I think that, if I remember correctly, that change has been after I disabled the quick start option.

  Eventually I could reset the compatibility mode and take advantage of the full speed. I am really impressed by the speed improvement.

  Kind regards

  Christian

• Install Windows 7 on SSD 4?

  Bought a new pc with SSD 128 G 3 and an ssd 256G and a 2 TB hard drive

  I would like to install windows 7 Ultimate on a ssd 128G, ssd 256G programs/software and other SSDS 2X128G serve as a timeline for Photoshop etc...

  How would you suggest putting in place while in disk for maximum performance management?

  Stripped volume or not?

  I would firstly 2 SSDS for the plan of installation in Raid 0

  The data would be hard disk

  Can I install windows 7 Ultimate on the first disk (disk Basic) then create dynamic disk on all four discs (after creating Raid 0 on handset the SSD to the Assembly plan)?

  Or which is exaggerated and I just point Windows to other SSD for programs and plan Assembly?

  It is my first build so would appreciate comment/help

  Thanks in advance

  Although RAID must be 1 configured in BIOS, no diskmgmt, at least

  2 HDs must, or must be connected at this time, after the BIOS, you will need to

  Configure the RAID in a pre windows start menu, this command sets for the RAID configuration.

  Once through, format and install windows. In addition, small HDs have better performance,

  HD 2 to, you can set them as non-RAID, you just a bunch of disks, settings

  JBOD, questionable installation... For more information about RAID, try this link

  https://TechNet.Microsoft.com/library/cc767920.aspx

  Technology apply to most / all pcs...