which is indicated when the computer (C) disc is red?

Similar Questions

• When the computer starts first to the top, a window titled "run as" the question "which user account do you want to use to run this program?

  Original title: which user account you want to use to run this program?

  I use a computer that is running Windows XP SP3. Recently, when the computer starts first to the top, a window will appear titled ' run as ' the question "which user account do you want to use to run this program?" with two radio buttons. The default selection is "Current user" and there is a checkbox to "protect my computer and data from unauthorized program activity. The other button is for "the next user. I have to click 'OK' before you can run any programs.

  There is only one user on the computer. Why has this window began to appear and can I get rid of him?

  Hello

  That you recently installed which triggers this popup message initially upwards?

  You can try to perform a clean boot and check if it helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to configure Windows XP to start in a "clean boot" State

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• Toshiba 32RV635D does not power off when the computer turns off

  Hello

  I inherited a Toshiba 32RV635D. I have a PVR based on linux (Mythtv) connected to the TV via HDMI, connected on a Nvidia GT610.

  With my previous TV, a Vistron LCD Panel at low prices, he would go to sleep when the put PC into hibernation and light up when the PC came back.
  This required no configuration of me, he's done right. The Toshiba TV does not work.

  With this Toshiba TV, when the POR turns off the TV turns off screen but is actually still on - power led remains lit in green.

  Same thing with the other way around - if I put the TV in standby and powered the POR, the TV does not respond and I have to manually put out of Eve.

  I updated the firmware and it has not changed anything, and I can't find anything related to power management in the menus of televisions. I even tried just pulling the HDMI cable to the back of the TV so it has no physical active entry, and yet, it does not fall to sleep.

  The Amazon page for TV mentions the power management features, and I expected from what I understand, it should behave the way she.

  I read a lot on HDMI-CEC, but to use it with my existing kit, I would need to buy an adapter USB - CEC, and which seems a little odd because my previous TV not cheap-as-chips just done this...

  Also, the different uses in linux suggests considers its sounds the right - 'xset q' running when the computer is idle tells me that "the monitor is turned off" when in fact it is not.

  Clues?

  Ricklous, it can be useful if you have a look at the url
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/RV635-323742-English-specific.PDF

  If you want to download the manual of the English edition for your model, I have not read through, but it may be useful to you.

  Either by the way, I have the model 32RL900A and find only a VCR plugged into the claims of taking SCART screen every time it turns on while the TV is set to a string of FTA (Free To Air) and then 'hands back' screen when he (PVR) goes out, and this, I discovered, is a characteristic of the system SCART.

  I don't know if this information is useful to you, but hope it helps.

  donhe7

• I get error code 800F0825 when the computer attempts to install the update to vista KB938371. What should I do to fix this?

  Ideas:

  • You have problems with programs
  • I get error code 800F0825 when the computer attempts to install the update to vista KB938371. What should I do to fix this? messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Backup of personal data (which none should be considered 100% reliable at this point) then do a format and clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or a network otherwise and before using a USB key that is not brand new, or has not been freshly formatted:

  5 steps to help protect your new computer before going online
       http://www.Microsoft.com/protect/computer/advanced/XPPC.mspx

  Other useful references include:

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I have blue screen error and auto se when the computer is turned off.

  My laptop has this problem of blue screen after sometimes and also when I turn it it will be auto even if I do not turn on the power button.

  After reboot and come to the desktop screen, it will display the following Microsoft error message

  • C:\DOCUME~1\Bongoh\LOCALS~1\Temp\WERc9da.dir00\Mini060610-02.dmp
  • C:\DOCUME~1\Bongoh\LOCALS~1\Temp\WERc9da.dir00\sysdata. XML

  I search the files and the directory WERc9da.dir00\sysdata.xml and WERc9da.dir00\Mini060610-02.dmp, but they may not exist in the system even if I set to reveal the hidden file.

  This after I upgraded the family windows XP Edition with service pack 2. When he was still using the previous service pack thing like that happens

  Now, what is the problem and how to solve it.

  If you have installed WinXP SP2, you could not possibly have had a functional antivirus installed. See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When the computer starts, it reads configuration updates 1 3-0%; not updated since 12.8.09, showing 8070002 error

  When the computer starts, it reads configuration updates 1 3-0%, but it continues
  Latest Windows Update 12.8.09; do not update since 12.8.09
  Display of error code 8070002.
  Mechanic charged and removed the registry and advanced system care3

  Hello

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  ------------------------------------------------

  Check the above and you may need to use these methods to interrupt the cycle.

  I guess that part of the question could be a driver which is really old or similar should not be loaded.

  This exit Windows updates on (after you have access) and stop the updates of the driver to load.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ---------------------------------------------------

  You can use the solutions in this KB - 3 methods and I listed a little help for them below

  The update is not installed successfully, you receive a message, and the computer restarts when you try to
  install an update in Windows Vista
  http://support.Microsoft.com/kb/949358

  Method 1: Start Windows Vista with the Windows installation media and use the repair feature

  How to do a startup repair in Vista
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  You can also do a safe mode startup repair to access the Recovery Options If you have them available
  or use the DVD as described above.

  This tells you how to access the System Recovery Options
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try recovery options Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  Method 2: Start the system in safe mode and then use the system restore feature

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  You can also do a restore of the system of starting with a Vista disk.

  Method 3: Rename the Pending.xml file, and then change the registry (this method is part of the advanced troubleshooting)

  See article below for that.

  You can use this method on the updates that have this problem.
  http://support.Microsoft.com/kb/949358

  Hide the update (click right - HIDE in the updates of Windows) and go to the Microsoft Download Center to download
  and install it.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  ------------------------------------------------------

  Once you are in Windows I was running once again reset here as a precaution.

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Hope this helps sort it out for you.
  Rob - bicycle - Mark Twain said it is good.

• My printer is configured to start when the computer turns on. I want to reconfigure it so that it does not turn

  My printer is configured to start when the computer turns on.  I want to reconfigure it so that it won't turn.  I know this is probably a simple change, but I can't find the path anywhere.  Any help?

  I guess you do NOT mean that you have both printer and computer plugged into the same power strip and both are turn on when you turn on the power strip.

  As nearly as I can determine the rather thin material in the Guide for the Dell P713w user, probably have enabled "Eco-Mode" or the mode 'sleep '.  See page 19 of the User Guide (if you don't have it, download it here: http://support.dell.com/support/edocs/systems/PRN_P713w/en/index.htm).

  When this feature is enabled, the printer goes into mode low power when it has been idle for a while.  When the computer is off, the printer is by definition inactive and so will go to low power, shortly after that the computer is turned off.  When the computer is turned on, it detects the presence of the printer and connects to the printer.  Apparently, the printer interprets this string as the "no-idle" and out of his low-power mode, which appears as if it is "turn on."

  In addition, this printer performs an automatic maintenance cycle every week if it is plugged into a power outlet. It will briefly exit Power Saver mode or turn on temporarily if it is disabled.

  At least one of the lights on the printer flashes power on and off when you think that the printer is turned off?  If so, it is in energy saving mode.

  Of course, I may be totally wrong, but it seems to me if you actually turn off the printer by pressing the button on / off on screen, he should not be able to auto (except once / week maintenance cycle).  From the Manual:

  Note: When the printer is turned on, press [power] to switch to the power saving mode. Press and hold [power] for 3 seconds to turn off the printer.

• When the computer remains in standby mode it will not start normally, usually ok in safe mode, but even when its up and running normally it's extremely slow.

  Original title: searchfilterhost problems

  I am running Vista family 32-bit and when the computer is left in standby mode, that it does not start normally, usually ok in mode without failure, but even if his place and it works normally is extremely slow. Having verified the use of the processor, 82 processes running anything meaningful except 50 + % is used by searchfilterhost.exe, this would cause the problem and if so how it can be cured.

  Hi Brian,.

  You have made any changes to your computer recently?

  I suggest you to follow the steps and check if it helps.

  Method 1: Follow the link and check if that helps.
  The problems of wake the computer from sleep mode

  Method 2: You can also follow the link and check if it helps.
  How to troubleshoot performance problems with sleep, hibernation and resume in Windows Vista

  Method 3: Search for viruses using the Microsoft Safety Scanner and check if that helps.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Method 4: You can also check out the link and check if it helps.

  Ways to improve your computer's performance

  How to make a computer faster: 6 ways to speed up your PC
   

• When the computer 'host' is accessible by the 'guest' on the network computer, the host computer crashes hard.

  There is no error message, making it difficult to diagnose. There are two computers running Vista, fully patched, connected via a network of small size. (Microsoft MSE, no virus, start using activated, etc. "It is clean). When the computer goes to * any * file of the host computer, the host computer crashes immediately. There is no error message, freezing of mice, all hard disk activity stops, it stops absolutely everything. The continuous guest PC works well, it simply notes that the host computer is "not available". Someone saw something like that? I certainly have not. It's far too vague to diagnose.

  I looked on the event logs and couldn't find anything saying. I disabled and re-enabled the network shares, etc. Because they are built Lenovo desktop computers, I have a difficult time to do a "repair", but I guess I could give that a shot with some Vista discs. As I understand it, these computers are not often with Vista bootable discs.

  It is essential that I can diagnose it. In almost twenty years of THIS I've never seen anything this vague and almost impossible to diagnose.

  Any help or advice would be greatly appreciated. Is it all the same to make a "full reset" or "Refresh" of networking in Vista? Who could do.

  I also note that it is a recent issue, these systems worked very well for a while and it's a change suddenly. Particularly curious because I locked the Windows updates to update only when I say so... and I didn't have lately.

  Have you tried to replace the NETWORK card on the computer that crashes? If not, it's what I would do then. MS - MVP - Elephant Boy computers - don't panic!

• Keyboard stops working when the computer is idle

  I have an ASUS desktop and windows 7.  When the computer is idle for a few minutes, the keyboard farm operation.  The mouse works fine.  Tried a new keyboard and no solution.  Tried a different USB port and the same thing.  If I restart my computer, it works fine until it is idle for a few minutes and then stops again.  Really frustrating.  any ideas?

  Original title: keyboard closed unexpectedly

  Hi Majohnson,

  Thanks for posting your query in Microsoft Community.

  I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.

  1. This is not the exact model. your ASUS computer?
  2. The issue has started happening recently? If so, did you do the computer-specific changes before this problem?

  The question could arise is there some problem of corruption of pilot partners or a third party service interferes with the function of the normal keyboard. In order to diagnose and resolve the issue, I would suggest trying the following methods and check if the problem persists.

  Method 1:

  Try to start the system in safe mode and check if the number is reproduced. If this isn't the case, then clean the computer starts and check if that helps.

  Step 1:

  Safe mode is a diagnostic mode in which you are connected with only the minimal necessary services and active pilots. Check if the number is reproduced.

  Start your computer in safe mode

  Step 2:

  Place your system in the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.
  How to perform a clean boot in Windows

  Note: See "how to reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after a repair.

  If the problem persists, try the following method.

  Method 2:

  If you have any security software installed on your computer, try to temporarily disable the security software and check if the key words work properly. Subsequent update of the security after a repair software.

  Disable the anti-virus software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  See method 3 for additional assistance on the issue.

  Method 3:

  Uninstall and reinstall the drivers USB controllers. Use Device Manager to uninstall and reinstall all USB controllers. This allows controllers to recover the port USB of his condition does not respond. USB controllers represent the USB ports in Device Manager.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.
  5. Plug in the keyboard and test to make sure that the problem is solved.

  For more information, please refer to:

  Updated a hardware driver that is not working properly

  Mouse, touchpad and keyboard with Windows problems

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Auto Disconnect when the computer shut down wanted!

  I'm working on two computers, home and office. Physically, they are 4 miles away. If I forget to disconnect when I leave my office (the computer be here correctly closed), in order to continue my work at home, I have to get back to the office to do this. Why in God's name did not do something on this issue? An option in the preferences which disconnects automatically CC when the computer is off?

  You are allowed to two facilities of the site.

  If you shut down a computer, whenever you start a machine, you will need to log-in to ACC again.

  A machine has nothing to do with the other machine being left or turned off.

• How and when the computer turns off automatically?

  Listen to internet radio, Sys Pref > saving energy on the default setting, wake up and radio program cut.

  This is great... .buth how and when the computer turns off?  When I reopen it wifi comes back, I'm correct when she stops she also turns off wifi?

  Hello allan299,

  Thank you for using communities of Apple Support.

  According to your post, I see that you have any questions on how and when your computer shuts down, and how the WiFi on your Mac is affected. I know it's nice to be able to properly manage what happens when your computer stops and starts in mode 'sleep'. I'm happy to help you find the best resolution.

  You're right, when your computer stops completely it will turn the Wi - Fi. If you enable the wake for network access, Wi - Fi remains lit, and you can access shared resources on your computer, such as printers or iTunes shared playlists even when your computer is in "sleep". Definition of a calendar closing and start on your Mac can also be useful.

  Check out the following resources that will help the set options that control the energy use of your computer, sleep, and wake-up times for your Mac and the calendar from your Mac to turn on or turn off or go to sleep:

  OS X Yosemite: energy saver Preferences

  OS X Yosemite: set sleep and wake up on time for your Mac

  OS X Yosemite: A schedule for your Mac to turn on or turn off or go to sleep

  Best regards.

• Which driver Apple opens the door to disc in Windows 10?

  Which driver Apple opens the door to disc in Windows 10?  I have a Mac Pro 64 bit and updated since Windows 8.1 for Windows 10.  I've updated the Boot Camp Assistant support files and the door does not open.  I do not use the player a lot more, but it would be a pain to have to start on Mac, open the drive and Windows to use a boot disk. The F keys seem to work in Word.  Software update in Windows can find nothing more.  I could try to fix the driver if I knew that one...

  You are asking questions on the eject button and eject the optical discs? Can you put a picture of the specific training you are interested in?

• 'Burned' fingers index to use MacBook Pro trackpad: my both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  Yes, I did

  My both hands, index fingers. which are based on the computer next to the trackpad or are used on the trackboard are painful, feel like they were burnt, and I can barely move them.  I do not have this problem before, I bought my new Mac - specifications below: it hurts and I don't have a problem with my windows, iPad or Samsung Galaxy equipment operating systems computers.

  It feels like radiation leaking through the computer case.  Is the radiation involved in the chips?

  MacBook Pro

  Model identifier: MacBookPro11, 4

  Processor name: Intel Core i7

  Processor speed: 2.2 GHz

  Number of processors: 1

  Total number of Cores: 4

  (By heart) L2 Cache: 256 KB

  L3 Cache: 6 MB

  Memory: 16 GB

  Boot ROM version: MBP114.0172.B06

  Version of the SCM (System): 2.29f24

  Are you use while plugged in, I feel a buzzing in my 13-inch rMBP (12.1)

• Satellite Pro U400-11V - charges only battery when the computer is turned off

  Following a reformatting my hard drive of the computer, my laptop recognizes only the AC/DC power adapter when it is turned off. When the computer is turned on, it does not recognize the AC adapter.

  Changed the power supply ac and it made no difference.

  Have also tried an update of the BIOS (3.0), I am running Windows Vista 32 bit.

  Hello

  I doubt it has something to do with the software or the operating system. In my opinion, that this looks like a hardware problem, because the battery will be always charged if AC/DC adapter is plugged in. That's why it of not necessary to enable this setting in the configuration of the software.

  If your BIOS is already updated, contact an authorized service provider. Technicians can check your laptop and maybe the motherboard needs to be replaced.