white spot

Similar Questions

• White spots on my 6s gray rear space

  Please help me to remove this small white spots on my 6 sec back.

  Nobody here knows what they are, take it to an Apple Store

• Portege Z830 white spots - refusal of warranty

  I have a Portege Z830. For several months, I have 2 white spots on the screen. I went to the service company official for the Bulgaria - Stemo Ltd. - which examined the computer and told me that I did this white spots by myself.

  It's amazing! I leaned on the screen with a screwdriver trying to make a white spot imagined.

  Seriously, impossible user by all means to make this white spots. It is a malfunction of the display and the refusal of the Stemo to replace or repair, it is not understandable.

  I am adding photos of the screen with visible stains.

  Please help or just take in mind the reaction of the Stemo.

  URL: http://i.imgur.com/J4sOSjm.jpg
  URL: http://i.imgur.com/hYSIBaB.jpg

  Indeed, the screenshots show two points of light on the screen and it looks like display malfunction.

  Usually if the warranty is valid, hardware problems (if it's not your fault) should be fixed free of charge.

  So I hope that someone will get in touch with you to clarify this matter.

• Small white spots on the screen (no pixels dead) of RMB

  This week, when I opened my MacBook on the screen, I saw on the white spots screen 12 ". At first, I thought maybe would it be a beat on the screen but a quick wipe down and a thorough inspection of different angles confirmed that it was something else. I closed and turned back RMB. The small bright white spots were persistent, although only perceptible in the middle of a dark background, or when the Sun is reflected on the screen.

  Everyone has the same problem or knows what is the best solution for this problem? I don't have a case at Apple yet, because I am in doubt if Apple repair this under warranty on the other I need to get in touch with my insurance company.

  

  It reminds me of all the problems with the Retina on the MacBook Pro screens (you can search "Staingate" in Google). If the MacBook is under warranty, you must make a backup of your data and take it to an Apple Store or dealer, so that you can get your MacBook repaired.

• Qosmio X 870-white spots on screen

  My Qosmio X 870 is 8 months old and have noticed white spots in the middle of the screen (more about half higher and mainly in the Center and go to the right of the screen).

  They are pretending be worse. When I go to a dark wallpaper that they stand as stained spots - more than anything else. I notice the most when I'm brighter games as tasks and it starts to get boring. I read on another page that it would be urgent foam top but not sure.

  Any ideas - would like to have an idea before I take it to be fixed.

  >... would have an idea until I get it fixed.
  I don't think it's so important. Is your laptop must be fixed so don t waste your time and contact as soon as possible the nearest Toshiba service provider.

  Laptop warranty valid so repair should be free.

  Good luck.

• White spot in left corner when Hibernation inexplicable

  Hello

  If I spend my yoga with Windows 8.1 in hibernation mode and restart it, I have on the desktop of windows (also on the execution of windows programs) a white spot on the top left corner. The place appears on the start screen and modern applications of Windows. If I have normal shutdown and restart the spot is also not visible. Does anyone know about this problem. I found similar problems via google about Windows 7 where it was a problem of AERO. But it does not work for Windows 8.1

  

  Take WinLister:
  http://www.NirSoft.NET/utils/winlister.html

  See what's inside a list corresponding to this area.
  Will probably take place (0,0) and size (4.4) or something.

• White spots on the screen

  IAM having white spots on the screen.

  It therefore appears as a white light spot when the screen has a light background. On a screen darker it disappears completely. The spot is a few millimetres in size. My system is lenovo Z50-70.

  should I have to replace the screen?

  

  as long as you don't have more than three dead pixels, lenovo warranty covers the replacement if they do not change the conditions.

• I have asked before: RE: white spot on desktop

  This is the error message.

  Line: 30

  Char: 3

  : Error loading the DLL

  Code: 0

  URL: File:///C:/Program%20Files/Dell%20Support%20Center/sscommon/common/inc/ss_shellinclude.js

  It seems to have something to do with your Dell Support Center.  What is the make and model and the product Tag of your computer?

  In the meantime, we may be able to get rid of the white spot (which is probably a hidden Dell notification).

  Go tohttp://technet.microsoft.com/en-us/sysinternals/bb963902.aspx and run Autoruns and click all.  Look for anything that is related to Dell and when you find unxheck the box to prevent it from start to start.  Check the entire list as there may be several entries.  When you're done, click OK and restart.   The white spot should be gone.

  If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

  If this does not work, will have to wait for the information on your computer to find the right download for trying to solve the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• white spots on the screen of the touchpad

  I just got a 32 GB touchpad. I noticed that there are some white spots on the screen. One of them near the top left of the screen is very notciable but only on a clear background as white and light gray. The special white spot appears brighter than the background (slightly bluish). It is about 2-3mm in the Center and extends the region approximately 10 mm. Also, anyone notice the same thing?

  I would not bother to repair unless the white spots get more over time. I wonder if this is a sign of failure. Thank you.

  P.S. shapes of white spots appear similar to these well-known yellow spots on ipad 2.

  OK, answered my own question. After some Internet research, I am convinced the white spots (or stains specifically) are "pressure damage. It could have happened during the Assembly process. Some have said that this kind of problem could get worse with time (as one of my LCD monitors). In any case, I discuss with CS and they will repair screen touchpad for me.

• Get rid of white spots on the old photo

  Hello

  What would be the best way to get rid of white spots on the attached picture?

  Thank you!

  

  Most of them can be fixed with the Checker task tool. The brush can create problems you may need to use the clone tool. If the task is small blur can also be used. Which is kind of how works the filter spot and scratch.

• Why the Clone/Heal tool does not remove a white spot?

  After being embarrassed by failing to check the Clone/heal tool to ensure that the opacity has been properly resolved, I am encouraged to ask another question which is not affected by the appropriate correction that in fact the tool works very well in most cases. However, the LR4 (and previously LR 3) use) iMac 27 quad) at odd intervals, some images present themselves with a single white spot, usually on a blue background, which cannot be removed or cloned with the LR Clone/heal tool. It can be removed with the cloning tool in PS, but not in the LR. I don't know whence the tasks. Sometimes they appear in a sequence of 3-4 or just individually. A copy of one is attached here. I don't know if this place is an aberration in LR or my cameras. As it happened with different cameras, I assume that there is a problem with the LR. Any comments?

  It looks like an adjustment brush.

  Hit your adjustment brush and see if a PIN is displayed. Select the Pin and remove it.  The task disappears? If so, that's the problem. Double check to ensure that it is not part of a series of strokes on the image somewhere else.

• white spots in first cs5

  This is the first time I had this problem... Problem has occurred on two occasions.

  #1. When I inserted a mpg in the timeline, then time remapped to extend time (500% or something like that) and I got a few black images (maybe 20 or more) to separate parts of the clip.  remapping back to the original speed did NOT help.  I had to delete and insert re.

  #2 when I inserted a mpg in the timeline, I cut a scene and placed a transition melted on the front.  Was beautiful.  Then I made in the area of work and suddenly the whole scene (5 seconds or more) is empty.  Transition only showed the decrease of the previous scene and was EMPTY for the duration of the famous scene.  I used the stage of the source (the full clip whence my second stage 5) more than once in the timeline.but now I pulled the active set in the timeline and made him and now the active set has white spots.  assets looks good in the control screen.  I do not know.  Help, please.

  Also, I read in some "no adobe" forum where a guy had a similar problem and the solution was to use the command "Insert" instead of slip and fall... but is it REALLY the method adobe recommends?  In my experience, you NEVER know when a scene is going to do, even after that that he has placed and examined.  Frusterating.  Help, please.

  TEX

  seems to me that you have a corrupted project file... Try A) removing your previews and pref and restart the program. If this does not work, try B) create a new project and import your current one in and see if that solves your problem.

• Remove a white spot in video

  Body CS4.  I shot a HD video and there was a small white spot on the black wall.  The camera does not move. This should be easy, I know, but I'm having a problem. I prefer to use the body to correct.  Masking and even a small black square of the video works but not transition also. In other words, in the previous shot lighter, you see my fix in the transition. Please tell us the easy way.  Thank you

  Maybe the effect of Clone of After Effects is to make higher quality work.

• Black and white spots on the screen

  We have a model 1510 X projector.  Recently white and black spots appear on the projected screen.  They are now more and more people.

  What is a sign that the world must be replaced or another problem altogether.

  Hello, this is the same problem that I have on my other projectors, bad chip DLP from Texas instruments. The models are 1209 s and 1610HD, in Total, three with the question. They are not guaranteed bought towards the end of 2009 and dell will not extend the warranty nor will they provide a chip DLP replacement through TI through their 5 year warranty on the chip, if you contact TI they will send you to Dell, I am frustrated by this, because there is no resolution. The repair depot wants more than 600.00 to fix all of them. They have less than 500 hours on each and original lamps. I think that Dell needs to get by with the TI to cover this issue. I won't buy an another brand projector Dell, and I will make sure everyone I know will never buy one. I am fortunate opportunity staring the unit, but they will not even an exchange of pieces. These DLP chips make defective on any brand, it's just how the manufacturer will take care of the case. Samsung will replace free problem specific models and stands behind the TI warranty even if the units are out of warranty of manufacturing. Unless you have purchased an extended warranty through dell that you're SOL, unless there is a class action to solve the problem. DO NOT BUY DELL PROJECTORS! Jerry

• Laptop screen HP Pavillion G series ~ white spots

  When I'm on Web sites with a "white" background I had 2 'white light spots"which appear on my screen, these tasks are not visible when on Web sites with a" black ". Does anyone else have this problem? If Yes, could you let me know if there is anything I can do about it? I brought my laptop in March 2012.

  Thank you

  They are probably defective pixels and I don't know how much HP policy if all is acceptable.  I wouldn't have everything on my screen.