Who's who and twitter stop working. NAN's Yearbook through what?

Similar Questions

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Updated to 3.6. Extensions and themes stopped working. Updated to 6.0. Still does not work. Returned to 3.6. No dice. Renamed all the extension. Still does not work.

  automatically upgraded to Firefox 3.6. Extensions and themes stopped working. Updated to 6.0. Still does not work. Returned to 3.6.20. Still nothing. Renamed extension files still nothing. Help. everything worked great until the upgrade. Thems like Noia and Adblocker Plus still do not work.

  To help other users find solutions, please return to this Thread and log in to the forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• WiFi connected but browsers and mail stop working

  Here's the situation:

  iMac, 4 years, OS X 10.7.5

  WiFi connected but, browsers and mail stop working sometimes recently.

  Checked the wifi & browser settings.

  Do not remember something like what happens when connected online cat5.

  Curious to know what is happening.

  Say local store card is perhaps go wrong.

  The machine is only 8 ' of router.

  Another pc on the network does not appear to be a problem.

  Any help appreciated.

  You can connect an Ethernet cable to see if it works on Ethernet when you encounter problems easily?

  Try to use your own DNS server.  Because if the DNS server that you use currently is not translate www.company.com name to IP address nn.nn.nn.nn, it will look like you do not have internet access.

  System Preferences-> network-> advanced-> DNS-> [+]

  OpenDNS.org

  208.67.222.222

  208.67.220.220

  Google DNS

  8.8.8.8

  8.8.4.4

  You can remove them later if you want using the [---] button.

  If this does not work, it could mean that your router is having problems.  Most routers act as the local DNS server, make a cache and especially fair bet as a DNS server provided a front for the access provider.  If the router begins to act, it can often be cleared by power cycling the router.

  And once again, if you provide your own DNS server works, then it could be DNS servers of the ISP, but less likely that they would be getting a lot of complaints from their customers (assuming that customers thought it was DNS servers).

  You know, there are 2 sides to any path of communications.

  If it is technically possible for radio Wi - Fi of the iMac to fail, it's actually not very common.

• HP ENVY Phoenix 810: Tiles and charms stop working

  Tiles and charms stop working. When the tiles stops working (by clicking tile on causes Office Office window to scroll) and I could still access the charm of the research, I ran sfc/scannow as administrator. He showed a couple of corrupt files, he couldn't fix, but on reboot, the tiles and the charms worked again. Have experienced this on four times at this point.

  Seems to have started with the last Windows 8.1 update and is somehow related to the engine OneDrive of synchronization.  I hadn't used onedrive; started using it, and this mess. I disabled all settings onedrive pc and laptop and stopped using it. However, the message "Synchronization engine OneDrive" appears for no apparent reason, and then the tiles and charms stop working.  If I have Outlook and Foxfire open apps, they still work, and their open windows always appear in the toolbar at the bottom. All other app shortcut links that have normally pinned it disappear.

  When I try to shut down the PC, if I can do this via the charm of power, I get a message that it cannot be closed because the "Portrait Display Inc. app prevents close.» There is no such program indicated in the list of installed programs in Control Panel. I understand computer Googling there somehow integrated in the HP PC.

  It is a HP Envy Phoenix 810, with a monitor (not touch) HP, both purchased December 2013. 8.1 Windows running automatic updates; using McAffee All - Access AV, up-to-date. Standard desktop applications. No software of Dingo.

  I see that many other people have had this problem, used the approach of the sfc/scannow, with little lasting effect.

  Plnjmw, welcome to the forum.

  If you have configured the Windows system restore, I suggest go back to a restore point before you started having the problem.  This will tell you if the update is the problem.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• USB mouse and keyboard stop working after I have install Windows Update KB2913431

  After installation automatic Windows Update KB2913431 (Win 7 Enterprise), the computer seems to work very well, but my mouse and keyboard stop working.  The option of automatic repair after that start with F8 does not work.  He said that the error is "unspecified".

  The fool is that it has created a constellation of intermittent problems when I try other options to get these devices to function after the update.  The questions I will of unpowered USB ports, grateful Windows and install the drivers for USB devices, but then do not recognize their (and are not), random BSOD, restore points invalid system, random boot failure, which causes discs to randomly stop working properly, closed randomly , à... I think you get the idea.

  I think it must be a driver problem.  I passed through the Device Manager and uninstall all hidden devices.  I have updated the drivers for everything that has an update available.  I tried to disable all, but Microsoft services at startup and in the list of "services".  I've always been unsuccessful; However, when I can get it to successfully restore to a point before the update (none of the automatic restore points work correctly) it seems ok.  It will sometimes seem to work after I applied the update, but then go haywire shortly after.  I am convinced that it is not a hardware problem, given that the prior update restores (when they actually cross without failure) work very well.

  I went through countless articles in the knowledge base and tried all the suggestions I've seen, other than registry cleaners because I had a bad experience with this earlier.  I tried so many things that I lost count and the memory of some of them.

  I reached point is never install the update (an option that I prefer not to use) or creating a clean Windows install on another drive (an option that I prefer not to use, but I'm a little more friendly to).  I already started to back up files to prepare a clean install, but I reach out one last time before I pull the trigger.

  Thanks in advance for your suggestions you have!

  Edit: I thought I could include other system information.

  Motherboard: Gigabyte P67A-UMD
  -Drivers for integrated components:
  Related articles - USB:
  -Renesas Electronics 3.0 USB root hub
  -Renesas Electronics USB Host controller 3.0
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1 26
  -Intel (R) 6 series/C200 Series chipsets USB Enhanced Host Controller - 1C2D
  USB root hub-
  -Generic USB Hub
  -Network:
  -Realtek PCIe GBE Family Controller
  Graphics card: NVidia GeForce 460 GTX (driver c. 332.21)
  Sound: NVidia High Definition Audio 4 x, Realtek High Definiton Audio x 1
  There may be a conflict here: the address of the Realtek driver is 00000201, which is the same address as * a Nvidia drivers.* *.
  Mouse: Logitech (MX518) G3 mouse optical - wired
  Keyboard: Keyboard wired simple Generic USB Dell
  All other USB devices are currently disconnected

  Thanks, but I tried to fix myself on a personal level - my IT Department is not hot.

  In any case, the problem was resolved after much googling - I took possession and renamed a bunch usb*.sys file in the Windows\System32\drivers folder, uninstalled items usb from Device Manager and did a scan for the hardware changes.
  This solves the problem.

• What changes hardwear and software stop working playready

  What changes hardwear and software stop working playready? I don't want reformat my drive again and reinstall windows because of this problem of playready.

  Thank you

  (1) use the http://support.microsoft.com/kb/976590 ResetDRM to reset your PlayReady DRM

  (2) run Windows Media Center. Update of PlayReady through tasks, settings, TV, TV Signal, PlayReady update.

• I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  I need to reload of Photoshop CS4 and I get the error: "License has stopped working" error message 6. -What this means and how can I solve this problem?

  Hello

  Please see error: "License has stopped working". Windows or error: "License has stopped working". Mac OS depending on the operating system you have.

  Hope that helps!

  Kind regards

  Sheena

• Since the Adobe Acrobat update in may on my Samsung GalaxyTab S android version 5.0.2 calculations (add, subtract and multiply) stopped working with pdf forms.  Same shape works well on laptop.

  Since updating Adobe Acrobat app in may on my Samsung GalaxyTab S android version 5.0.2 calculations (add, subtract and multiply) stopped working with pdf forms.  Same shape works well on laptop. Form calculations are still working fine on the laptop using the same forms.  Also worked fine on Samsung Tablet before can update the app.

  Hi herb,

  The calculations do not work as they use Javascript to perform the operation and version 5.0.x Lollipop has problem with Javascript that is fixed in the version 5.1.x.

  Thank you

  Abhishek

• Can I restore my laptop hard drive files that have been moved to my external hard drive (who subsequentally has stopped working)?

  I cut and pasted and then a few important files from my laptop on an external hard drive. Since the external hard drive stopped working. Is it possible to find the files that have been moved?

  Thank you!

  (More info: I tried to recover the files from external hard disk but it requires a physical recovery and would cost over $ 1000, which I did not; also unfortunately I don't think I created backup via the "backup and Restore Center" files in the control panel).

  It depends on how long you have moved the files, and how the computer has been used since.

  If you have Vista Business, Ultimate or enterprise, you can use the previous versions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/previous-versions-of-files-frequently-asked-questions

  Try these programs:

  • Free: http://www.filehippo.com/download_recuva/
  • $99, but the free trial version to see if it works before paying: http://services.seagate.com/eStore/Seagate-File-Recovery-for-Windows-P32C1.aspx

• Director of office of Smartphones blackBerry 4.2.2.14 completed sync and then stops working

  I use DM 4.2.2.14 with curve 8310 and vista + Outlook 2003.  It was fine for about a week of work but who suddenly began to stop working once it has finished synchronization.  I tried to repair the installation but no change.  Any ideas please?

  Thanks for the tips.  This seems to have worked - fingers crossed that it lasts.  To answer your question - nothing has changed or has been added to the previous installation.

• Weather gadget and currecny stopped working - failed to connect

  Hello:

  I just noticed that my weather gadget and currency has stopped working today.  The only change on my computer was the Assistant to upgrade Windows 8 I used to download the new Windows 8.  I have not installed, just burn the ISO.  I tried to restore my computer to a previous point before that, but it still does not work.  All gadgets except for gadgets weather and currency.

  Is there a setting that has been changed?  I tried turing off LAN and on, tried to turn off the function gadget and on again and nothing helped.  IE is set to work online also.  So, I don't know what happened.

  Help, please!

  Thank you!

  Update:
  Microsoft has DISABLED the weather gadgets and currency via a recent update of security, because of worries about the vulnerability associated with these gadgets running on your computer. You can read more here: http://support.microsoft.com/kb/2719662 . Adjust the settings of your computer and all these other 'suggestions' people are, will NOT work. The function has been REMOVED from the operating system. It has also been removed from Windows 8 operating system. There are "theorists" who agrees that there is a security problem in the gadgets or Microsoft just doesn't support gadgets (usually from third party software) and has therefore disabled them in Windows 7 and eliminated in Windows 8.
  Thanks to DaveNYC for the Info. Pass the word, because a lot of people is facing this problem just like you.

• Mouse and keyboard stopped working on Windows 8

  I have a laptop Sony Vaio model VGN-NS110E 2010 number middle. Since a few days ago my mother used it, and after it was closed and she turned on, the keyboard and the mouse do not work (the mouse wont even see on the desktop). (Yes, I tried to plug in an external mouse and keyboards, the computer won't even save) It seems that the keyboard does not work for a second before loading windows because I can press the NumLock key and the light comes on and goes off. But once windows starts loading, it stops working. The mouse and the keyboard also works if I get the computer start in recovery mode (the blue screen with the options to perform a system recovery, etc.). I can't the computer to boot in safe mode. And I tried to do a reset back a few days or a few weeks, and the mouse and keyboard still do not work. I'm guessing that the drivers are not loading, for some reason any. I guess the logical solution would be to do a factory reset, but my mom has all these bookmarks saved in his internet browser explorer, that she does not want desperately to lose. Anyone has any suggestions on how to fix or at least on the way to save somehow my moms stuff and if a reset?

  Hello Duane,

  Thank you for the update on the issue.

  If the keyboard and mouse does not work in one of the option, this means there could be a hardware problem is not getting detected so you may have to perform a refresh of your computer, but for this, there are also a working keyboard and a mouse. The best option that I can help you is to contact the manufacturer of your computer (SONY) or technicians who can check it physically and can reach to the root cause.

  Keep us updated on the issue.

• WNR3500L model after a power cut my modem and router stopped working.

  I tried to unplug and leave for 30 minutes and plugged back but nothing has worked. Does anyone know what I need to do?

  What are the symptoms that you get from the router? In the case the modem and the router something might have gotten fried. I would try different adapters on both hoping that power adapters are those who got fried. If you still have the same results its probably time to get the router and the new modem. Let us know what happens.