Why can not be installed the coupoun printer?

Similar Questions

• I have Acrobat 10 and became error update messages that I've finally done what Adobe recommended and uninstalled Acrobat.  Now, I can not re-install the program and get a number of different error messages.  Help I need to read the pdf docs!

  I have Acrobat 10 (10.1.9) who came in the Creative Suite CS5.  I received many messages about updates failed so finally did what was recommended by Adobe and uninstalled the program.  Now I can not re - install.  Here are the error messages I receive.  Help!

  Exit code: 6

  Please see the faults and warnings below for troubleshooting. For example, ERROR: DW050... WARNING: DW065, DW066...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 3 (s), 2 warning (s)

  WARNING: DW066: OS requirements not met for {AC76BA86-1033-F400-7760-000000000005}

  WARNING: DW065: display the requirements not met for {53CF3920-648B-4F99-8D05-6A6C5298F57B}

  -Payload: {AC76BA86-1033-F400-7760-000000000005} Acrobat Professional 10.0.0.0.

  : Error 1328.Error applying the fix to the C:\Config.Msi\PTDB05.tmp file.  It has probably been updated by other means, and can no longer be modified by this patch.  For more information, contact your patch vendor.

  ERROR: Install payload MSI failed with the error: - 1603 Fatal error during installation.

  MSI error message: error 1328.Error application of the fix to the C:\Config.Msi\PTDB05.tmp file.  It has probably been updated by other means, and can no longer be modified by this patch.  For more information, contact your patch vendor.

  ERROR: DW050: payload following errors were found during the installation:

  ERROR: DW050:-Acrobat Professional: installation failed

  The installation must be done through the CS process, not a straight line installation and activation as a stand-alone product.

• Why can not download update the driver for sony dcr-hc19e camera camera it does not always to the install Shield Wizard step 5009-ox800 2802b error

  tried to download the driver several times but always fails at the same point installation wizard shield error 5009-0 x 8000 2802b

  Hi billy2wheels,

  Exactly how you try to install the drivers?

  This indicates that the Setup file is corrupted.

  If it is an installation file that you downloaded, the downloaded file may be corrupted. Try to download the file again.

  If it is a file on a Setup disk, contact the vendor for a replacement drive

  You can download the driver from the sony below link:
  http://support.Sony-Europe.com/dime/downloads/downloads.aspx?site=odw_en_GB&m=DCR-HC19E&f=usbdrven_vista

  Reference:
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/5d70da6f-402F-4c27-AE32-0e3d553020ae/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP1510 0 x 00000709 can not set as the default printer

  I installed my new HP1510 printer on computer with Windows 7, but I can not set as default in Control Panel printer, get error message 0 x 00000709. This means I can't print a PDF file as my previous printer, which I uninstalled it, is always shown as default in Adobe Reader. I can print emails ok. Please help as I bought the computer to print a PDF file!

  Hello lanto17,

  Welcome to the HP Forums!

  I understand that you cannot set the default printer and are experience PDF problems. Please, try the following steps to answer all your questions:

  Click Start, type Regedit in the search bar. Right-click on it and choose "Run as Administrator". Now, find the following key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows

  You will need to give this key all permissions. To do this:

  (a) right click on the key that you need to change and/or delete. Click on "permissions...". »

  (b) click on 'Add' in the window that appears.

  (c) there will be an empty box under "enter the names of the objects to select. Type "Administrator" (without the quotes), then click on "check names".

  (d) an administrator name appears, click 'Ok' when it does.

  (e) you should be able to select the profile (click) the administrator under "group or user names. Once you click on it, click on "Advanced".

  (f) click the 'owner '.

  (g) click on the Administrator profile, then put the checkmark in "replace the owner of subcontainers and objects".

  (h) return to the "Permissions" tab, then make sure the Administrator profile is selected.

  (i) in the "Permissions" tab, put a check in each box available. Boxes will probably accompany "Include the permissions that can be inherited from the parent to this object" and "replace all permissions of child object with permissions inheritable of this object.

  (j) then click on 'change '. Put a mark chark in "Full control" under allow. Click Ok. Now click on apply (you may receive a message of Security window, simply click 'Yes'), and then click Ok.

  (k) out of the registry, and then restart the computer.

  The last step is to restart the print spooler. To do this, type services.msc in the search bar. Right-click on it and choose "Run as Administrator". Find print spooler and stop it, then start it.

  Now try to set the default printer like PDF files and printing. Let me know what happens. Thank you!

  Have a wonderful day!

  Mario

• Why can not I unenstall epson photo print 2

  When I try to uninstall epson photo print 2 I get an error message-windows has encountered a problem and needs to close. I'm trying to install a new printer and software.

  Hello

  Epson has perhaps a particular way or sequence to uninstall their software

  try to ask for their support

  http://www.Epson.com/cgi-bin/store/help/help.jsp?BV_UseBVCookie=Yes&category=products

  or you can try the FREE revouninstallaer

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

• Photosmart6520 can not set as the default printer

  , get ' operation could not be completed (error 0 x 00000709).» "Double check the name of the printer and make sure that this printer is talking to the network.

  

  Hello clayjunkieand welcome to the Forums of HP, I hope you enjoy your experience!

  I see that you get an error when you try to set the default printer.

  To get the best this problem solved, I suggest you visit this forum thread, started by @SuperMario1 , on this issue.

  Although the thread is called HP Photosmart 5520 does not appear when printing PDF, included steps should fix this for you.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Why can't I install the latest version of 18.0.0.209, flashplayer?

  I tried several times but it always supplement version 18.0.0.203 and says it must be updated. This version is currently blocked too?

  Ok. Have you tried to uninstall previous Flash (18.0.0.203) before installing the new (18.0.0.209)? And where are you going to check the version?

• I restored my system to the previous date and now I can not re - install the adobe creative cloud... always a message to re - install! Why?

  Can someone help me?

  uninstall all cc, you can uninstall it by using uninstall files.

  clean a http://www.adobe.com/support/contact/cscleanertool.html

  Reinstall the application of cc, Download Adobe Creative Cloud apps desktop | CC free trial Adobe

  install your programs from cc using the cc desktop application.

• J4680 - can not re - install the driver software.

  Problem of impression and he had advised to reinstall the printer software. Uninstalled the program, rebooted & then tried to reload from the original CD of HP Officejet. The operation failed - error message says it could not find a file - and then abandoned. Defective CD?

  Went to site (official!) HP found correct J4680 download for Vista, but once again, unable to finish. Error message: - System cannot find file specified - E:/setup/hpzshlautorun.infice_suffix.exe-m

  What it means?

  What can I do?

  Why used the original work of instant CD?

  Thank you Mario for your answer. The steps that you list are exactly what I did when the error message came. However, the problem is now resolved. When I rebooted, Windows detected my printer as a 'new' device and asked me to load the CD. So I tried again and this time he accepted it and installation is complete. Maybe the CD was slightly damaged but accepted at the last attempt. Must try several times.

  Everything is working OK now.

• Windows 7 can not connect with the HP printer

  I have a HP Officejet 6500 E709n and I am running Windows 7 Professional on my laptop.  Recently, the printer no longer works and needed an updated driver.  When updating the driver, you must uninstall the previous software.  Once completed uninstalling the new updated driver installation failed.  I get a fatal error message, and after 2 hours with HP support make advanced remote troubleshooting, we found that, whenever I try a new device/printer, Windows 7 is rejected and not allowing the connection indicating the device is not signed digitally.  The problem is the device is digitally signed, but Windows 7 is not recognizing.  How can I get Windows 7 to recognize and allow my printer to work again?  I have tried both add wireless printer and plug the USB cable without success.

  Hi Sheldon,

  What is the accurate and complete error code that you get?

  If you get the error fatal error occurred during installation, I suggest you try the steps from the following link:
  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c02455020&LC=en&DLC=en&cc=us#N3054

  I hope this helps. Let us know if you have other problems with Windows in the future.

• Can not re - install the software

  I had problems with my computer, so I took it to a shop for repair. After I came back, it would only print in color, no matter how many times I tried to print in grayscale.  The tech shop supposed to put the HP drive in the computer and uninstall the software, restart the computer and reinstall the software.  During installation, I received this message:

  "You must restart your computer to continue the installation.

  There are some files that must be removed before the installation can continue.

  Please close all programs and then click on restart.  This installation will continue after the restart. »

  I tried this 3 times and has received the message every time. What I am doing wrong?

  I down loaded the base of HP driver and installed without problem. Printer works now.

  Detective Conan

• Why can not install the latest version of Flash, when I already have the oldest?

  My antivirus software is disabled. Currently, I have Flash on my computer. In the troubleshooting page, I see clouds in the picture so I know that my current flash works.  I went into internet settings for modules and flash is currently enabled.  Why can't I install the latest version of Flash? I tried to run it and save option and it has not always worked. I can see the installer in my downloads folder. But all I get is a black box of vacuum that does nothing. What else can I try to get the installer to install the updated flash version?

  Try the install (s) offline

  • Flash Player ActiveX (Internet Explorer)
  • Flash Player plug-in (all other browsers)
  • Flash Player for Mac OS X

• Cannot successfully install the HP printer...

  Hello, this is my first post here, probably because I never really need help before.

  I have an old Deskjet F2280 all-in-one printer, who had given me no problems until the other night when I plugged into my laptop to print something. For some strange reason, I got messages saying that I had to reinstall the software.

  Think the best thing to do would be to uninstall all HP applications and reinstall everything, that's exactly what I was doing. But almost immediately I started having problems with missing TrayApp messages, etc. So when I inserted the original CD to reinstall, I found that it was more accepted (out of date drivers?).

  After you download all the latest drivers etc on the HP site, I thought I would be OK. But the current situation is that I can not properly install the software; everything seems to work fine until the end of the installation when I get a fatal error message. I followed all of the suggestions I've seen on the internet, including the removal of all temporary files, but nothing seems to work. At the moment I have no printer; When I install the necessary drivers, TrayApp messages return and the printer does not work.

  Any suggestions are welcome.

  Florio

  Hello again Florio,

  Thanks for getting back to me with the information on the computer.

  I see that you said that you have been on the HP website and downloaded the driver software and updated and you still have questions.

  I suggest uninstall us the drivers and the HP software and once it is removed, please click on the following link for the printer HP install wizard for Windows.

  Before running the wizard, make sure you have any firewall or antivirus McAfee or Norton 360) off protection.

  Please feel free to write back if you have any other questions.

  Thanks again for your time.

• Why can not download a coupon printer?

  Why can't I download a coupon printer? Tried several times. Keep saying that it is done, but he's not here.

  This has happened

  A few times a week

  Is when I downloaded 3.6.4

  I can't print coupons now since I upgraded to Firefox 3.6.6? I tried to install the coupon printer several times and uninstall that I can't print my coupons, What's UP?

  I need my coupons!

• Why can not only print from widows 7 to my hp6100

  Why can not only print from widows 7 to my hp6100

  Hello

  Probably, you need drivers, please download the following package and install on your Windows 7 computer:

  http://ftp.HP.com/pub/softlib/software12/COL42284/bi-108861-3/OJ6100_1321.exe

  Kind regards.