Why do I keep losing connection Wi - Fi,.

Similar Questions

• mouse for my IMAC Apple keeps losing connection.

  My apple mouse keeps losing connection. I changed the batteries, which show all the power, so I don't think that's the problem. When the mouse loses the connection, I have to keep clicking on it until the connection comes back. The mouse is defective?

  Your answer is probably:

  If your Apple wireless mouse, keyboard or trackpad doesn't work as expected - Apple Support

• Aironet 1310 bridges keep losing connection

  There was a similar thread about this last year and I tried what was listed in nothing doesn't.  I have 2 bridges Aironet 1310, one under a road bridge and the second as a slopes(32°) with the customers.  These worked great for almost a year, we have not had any problems to keep the connection.  They were not connected for the last month, but nothing has been changed on the configuration, when I got to the top they reconnected very well and worked for about an hour, they randomly don't disconnect with the same message in the log below.  Is there something wrong with them now?  Use the same antennas as before and are in the same exact location.

  newspapers of root bridge

  29 Nov 13:52:53.311: % DOT11-4-MAXRETRIES: XXXX customer package. XXXX. XXXX has reached max attempts, removing the customer
  29 Nov 13:52:53.311: % DOT11-6-CANCELLATION: Dot11Radio0, Deauthenticating Station XXXX of the Interface. XXXX. XXXX reason: previous authentication is no longer valid
  29 Nov 13:52:53.568: % 6-DOT11-ASSOC: Interface Dot11Radio0, Station Test sex toys. XXXX. XXXX again associated KEY_MGMT [Wpa2 PSK]
  29 Nov 13:55:16.260: % DOT11-4-MAXRETRIES: XXXX customer package. XXXX. XXXX has reached max attempts, removing the customer
  29 Nov 13:55:16.260: % DOT11-6-CANCELLATION: Dot11Radio0, Deauthenticating Station XXXX of the Interface. XXXX. XXXX reason: previous authentication is no longer valid
  29 Nov 13:55:16.550: % DOT11-4-MAXRETRIES: XXXX customer package. XXXX. XXXX has reached max attempts, removing the customer
  29 Nov 13:55:16.550: XXXX customer. XXXX. XXXX failed: reached maximum attempts

  nonroot newspapers

  November 29, 2010 13:52:55: % DOT11-4-UPLINK_DOWN: Interface Dot11Radio0, lost parent: received deauthenticate (2) not valid
  November 29, 2010 13:52:55: % LINK-3-UPDOWN: Interface Dot11Radio0, changed State to down

  a RTS/fragmentation 4000 value means RTS/fragmentation never happens, because there way on the size of wireless frames. In fact :-)

  -77 is not very exciting signal strength. It is very good that this is but a little fluctuation and boom, signal becomes illegible.

• Why do I keep losing my Internet connection when I still have a good WIRELESS card on my Windows 7 laptop?

  I always lose my Internet connection but yet my network signal strength is good. This happens on my Windows 7 operating system, but not my Windows Vista operating system. I'm afraid that this could have something to do with the firewall settings? He was repeatedly interruption of connection with the Internet and the two operating systems. Unplug the unit and reset the router solved the problem with Windows Vista, but only momentarily for Windows 7. I ran the diagnosis and resolution of problems. This utility can detect never any problem. Sometimes the diagnostics displays a problem with a connection to the Ethernet cord (but the laptop with Vista OS was fine). I have reset the wireless adapter, which claims to be working very well, over and over again. I have reset the settings of the Windows Firewall to its default settings. Don't know what else to do. Help, please! I fear that the problem exposed my laptop to a potential security threat.

  • I use a public network location setting I got with a security access code
  • Atheros AR9285 802.11b/g/n WiFi Adapter is the adapter connection
  • NETGEAR's router
  • WPA2-PSK is my type of security
  • Radio type 802.11n
  • Windows Firewall on
  • Microsoft Security Essentials on real-time
  • Microsoft Virtual Mini Port Adapter (WHICH I'VE NEVER SEEN BEFORE JUST NOW) displayed in network connections, but is not connected!

  Mindy

  Long @Mindy

  Try this,

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check support for the router and make sure that your using the latest firmware for the router.

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Magic Mouse 2 keeps losing connection

  Hi, I use an iMac nine 5 k, v10.11.5 El Capitan

  Whenever I use the mouse will randomly lose connection for about 5-10 seconds and then reconnect. It also happens with the keyboard sometimes. More than 90% battery levels

  Can I do about it? It really disrupts my workflow.

  Thank you

  Hello miles M.

  I'll try to answer your question, but I'll have to make some assumptions.   Unlike many, you have correctly filled out your profile and it helps.

  For example;  I see that in addition to the MacBook Pro (running El Cap), you have an iMac (running El Cap) and a Yosemite iMac running.   They are all in the same room a lot of the time, like when your problem occurs?   Then, the mice.   At least one must be Magic Mouse 2, but it will be Magic Mouse 1.   They are close together?   If one of the above is true, it is most likely that you have an interference problem.   And where the mouse is the problem my assumption is the Magic Mouse 2.

  The first thing to do is to try to isolate the Magic Mouse the part 1.   Turn off the iMac of Yosemite loaded, remove any tablets Wacom and pens and other and tested of the Magic Mouse 2 with the new iMac.

  Now, my imagination is not exact, so where things are differently, let me know so that we can talk our way through it.

• Keep losing connection external drive to extreme capsule / hour airport

  I have an external drive (disk used to format - logged utility) it worked very well for the first 30 days and now I get no back up the error. I can see the drive but cannot connect to it. I unplugged, plugged in. Nothing. I had to reformat to make it work, and then it stops again.

  So far, not impressed by that.

  Help.

  Thank you

  Stephen

  What model is your extreme?

  What OS is on the computer?

  The USB stick can be difficult... sometimes a powered USB hub makes better work. But I recently tested a new TC model (identical to gen6 AE) and it was not reliable...

• keep losing connection to e-print

  will not stay connection e-print

  Hello, there are 2 reasons to "lose the connection to e-print. 1 > e-print requires an active Internet connection: Please check with your ISP and see if there are problems at their end with your wireless network and internet. 2 > e-print servers undergo maintenance during which there could be a non availability of e-print services. Best regards, Jabzi, I work for HP. Please select the button "Accept as Solution" on the post that answers your question better. In addition, you can select the 'Congratulations' button on any post helpful to give this person a quick thank you.

• Why do I keep losing my text and expansion when firefox is closed?

  My zoom settings and text always returns to the small (default) settings when I quit Mozilla Firefox.

  Here are the parameters:

  the button Firefox orange (or the Tools menu) > Options > content

  I think that those who are registered in the prefs.js file that can be modified or replaced by other software. Some things to consider:

  • How to fix preferences that will not save
  • If you use Advanced SystemCare, disable "Surf Protection" feature in order to save the changes

  If you lose such site specific settings to increase or decrease the zoom levels, I think they could be part of the "Site Préférences" category. If you have Firefox clear history to stop, try to uncheck the box for Site preferences and see if that helps.

  the button Firefox orange (or the Tools menu) > Options > privacy

• Why do I keep losing my audio?

  When you play a video on YouTube or Netflix or even watch a DVD, my audio will play for a few minutes and then go silent.  I've updated the audio driver, but it did not help.  I don't know if I've updated with the correct driver well.  I have a Toshiba Satellite.  Any suggestions?

  When you play a video on YouTube or Netflix or even watch a DVD, my audio will play for a few minutes and then go silent.  I've updated the audio driver, but it did not help.  I don't know if I've updated with the correct driver well.  I have a Toshiba Satellite.  Any suggestions?

  Generally, it can be due to driver or codec issue.

  You must uninstall and reinstall the updated driver from the manufacturer's Web site.

  Download and install AC3Filter

• IQ770. I keep losing my network adapter hp 802.11 abg wirelee LAN

  Every now and then I lose my wireless connection.  When I check in the Device Manager, to the title of the network card, wireless LAN hp 802.11 abg is over.  I try reinstalling driver material using the Manager of recovery without result. So what I do is connect by wire.  In the next few days, my wireless connection back in itself.  How to re - install this wireless adapter; Why do I keep losing and what do I do if I do not lose it?

  Try removing the Device Manager. Right click and delete. Reboot and it should install. Wait to see what the company makes the device wireless in Device Manager. We may be able to find an updated driver. Must be something like Broadcom, Lite-on. etc.

• Why I keep losing internet connection?

  For a long time, I keep losing the internet connection.

  I lose the connection when:

  • I move to a different location around the House
  • Another computer is turned on
  • I just returned from a sleep mode

  Why is this? Because of the router?

  Help, please! Thanks in advance!

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And
  I would update your WiFi drivers on computers. How you are positioned in the router?
  Are there obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver-
  Note the version - click on update driver (can't do anything as MS is far behind certifying)
  drivers). Then right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver
  stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network (NIC) card and is a good time to get the other updated drivers Vista
  love the updated drivers.

  I would also turn off auto update for the drivers. If Windows Update suggests a just HIDE
  because they are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click custom - defined network
  Locations page - down left click on merge or delete locations networks - REMOVE ALL THE
  instances of your network (and others, you no longer use) - REBOOT. Start - connect
  To connect to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an address IP of certain routers or from certain non-Microsoft
  DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Connection wireless printer keeps losing.

  Printer keeps losing wireless connection?  I see this question posted a lot so I decided to leave a link to a video on setting up a static ip address.

  I hope this video helps.

• keep losing internet connection on PC laptop of HP Pavilion g6

  As above, I keep losing internet connection on PC laptop of HP Pavilion g6 and often have to go out to get it back. I had the laptop for over a year and have had this problem from day one. There is often no connection at all. I'll be on a a Bab beautiful site and then the next it just freezes. Sometimes clicking on dissconnect then reconnect will solve the problem. But most of the time that I have to turn it off, wait a few minutes and then restart your computer. It does not always if I have to do it again. As above, I have had this problem from day one. When I got it home it has no connection to be seen. I took it streight back to PC world, they passed it and connections were there. When I got home, turned on others were there, but not my own. After the market again was mine. After that, it was OK for a week or two, then I started having the problems that I have now. My son sitting about three feet from me on his laptop has no problems at all so I know that it is the laptop and not my router. My wife, my son and my phone are also on the internet through the router when it fires. Now and then it will be OK for a few days, but most of the time it turns off several times a day. It's a good pain as each else with the laptop is great.

  Hi @wiggie ,

  Thanks for your post, I will do my best to help.

  What trust do not forget it is very helpful if you include your exact model of HP laptop and operating system.  HP produces many models of Pavilion G6

  How can I find my model number or product number?

  It sounds as if after a period of the computer is the ' turn off.

  You would check the Please this setting.

  Go to the Device Manager

  Click on the adpaters network to expand the list

  Right-click on the network adapter and choose Properties

  Click the Power Managerment

  Please uncheck allow the computer to turn off this device to save power if it is checked.

  Repeat the above for all types of additional network adapters.

  I hope this helps.

• router wireless Belkin an i keep losing my connection

  I have a belkin wireless router, i keep losing my connection, I have to go into my settings a TI is one connects showes here it's continues to lose connection an i don't have not spending my laptop in the room where my router is.can someone tell me what happens ever happens before

  today.

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the full and exact error message?

  3. what operating system is installed on the computer?

  Method 1:

  I suggest you to refer to the article and see if it helps:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Check the link and see if it helps:

  You may experience connectivity problems or performance issues when you connect a portable computer that is running Windows Vista or Windows 7 to a wireless access point

  http://support.Microsoft.com/kb/928152

   

  If the problem is not resolved, please provide more information to help you best.

• I keep losing my connection to the Media Center on my D-Link DSM 750

  I keep losing my connection to the Media Center on my D-Link DSM 750 when you try to view the video library. Music photos and everything else works fine?

  Hi Ghostrider457,

  Are a. When you facing this problem?

  B. you get errors?

  C. recent changes made on the computer?

  Method 1

  Try temporarily disabling the firewall/antivirus software and check if the problem persists.
  Turn on the firewall / antivirus after you check the status.

  Method 2: new user account

  1. open user accounts by clicking the Start button, clicking Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on manage another account.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4. type the name you want to assign to the user account, click an account type, and then click on create an account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Try and tell us the result.

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think