Tecra A8: Fingerprints - 1080 biometric sensor sensor is not calibrated

Similar Questions

• Tecra A11 - 11L - fingerprint sensor does not work

  Hello
  I had a problem with my Tecra laptop. The fingerprint sensor does not work since yesterday. It also disappears from the hardware Manager. I tried to reinstall the utility, but the setup.exe will not run successfully. When I try to install the utility directly from the amd64 Directory installation will be successful, but the software is unable to connect to the fingerprint sensor. I also tried to install the original Windows image, but the sensor does not work.

  You have any ideas?

  Berst cordially
  Thunder1988

  You can try a BIOS update and set the default BIOS. If it still does not appear in Device Manager, the player is maybe defective or there is a connection problem. I'm guessing that the laptop is still under warranty, you may have to send the laptop to a Toshiba repair center.

• Tecra M5: print fingerprint sensor is not working properly because a drink was spilled on the keyboard

  My finger print sensor does not work correctly as a drink was spilled on the keyboard. While booting, it automatically "fails" 5 times in a row (without any attempt to slide a finger), and then by default at the entrance of password to boot the disk hard machine.

  This is not a problem and all I want to do is disable the finger print sensor, but cannot work out how to do this. I tried to uninstall the driver, who seemed done without any problem, but during the reboot, the sensor still seems active, and always goes through the same process.

  Everything else works fine and it's just a minor niggle, but I would like to delete the gene of it me beep 5 times then it does its thing.

  Can someone tell me how I turn it off completely?

  Thank you.

  Did you remove the fingerprint software? If Yes check if some unknown device is listed in Device Manager. Please post the result.

  Maybe you can try to disable this unknown device and it will not be recognized as new hardware every time when you start the laptop.

• The fingerprint sensor does not work

  Hello, I have reset windows on my laptop and the fingerprint sensor does not work, windows recognize the sensor, but in the Device Manager, windows says there is a problem with the sensor, "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Thank you for your attention

  I finally found the problem reset the pc thanks for your attention somehow

  Good day.

• HP DM4-2070US fingerprint sensor does not work

  I have a HP DM4-2070us, and the sensor does not work. I reinstalled Win 7 Pro 64 bit with all the drivers of HP and all updates from MS, but the HP Simplepass software will not recognize the drive. I uninstalled the driver and Simplepass software and reinstalled both using all versions listed for my model on the support page of the HP drivers. The drive is correctly listed and shows installed in Windows 7 Device Manager. I installed another unit of material Validity Sensor and still the same issue.

  Yes, so apparently the software downloads & driver from HP support was insufficient to restore the function of sensor of fingerprint on top a new installation. It's a machine on which someone had partitioned and formatted the drive. I cloned the drive from an another DM4-2070us with the original configuration of the software and then it worked. Thanks for the suggestion.

• Tecra R940 - fingerprint reader does not

  Hey,.

  A few days ago I was on my Tecra R940 and I got the messages re, a USB device unplugged series. I do not think it a lot at the time, but since then my fingerprint reader has stopped working.

  I can not connect via fingerprints, and when I run the utility of fingerprints, he says: "unable to connect to the probe.

  I ran the test of Toshiba PC diagnostic tool and it passed everything except the Modem test (I jumped, do not have a telephone line).

  Any ideas on how to diagnose this?

  Any help is greatly appreciated!

  > I can not connect via fingerprint, and when I run the utility of fingerprints, he says: "Failed to connect to the sensor.

  If the fingerprint sensor is available, it must be in the Device Manager.
  I would recommend that you go to Device Manager and check if the fingerprint sensor is listed there.

  Note: in some cases the option of fingerprints is available in BIOS and fingerprints can be enabled or disabled it. That's why I also recommend to check this option.

  Where the fingerprint sensor appears not in Device Manager and in BIOS of fingerprints is activated, I guess that hardware malfunctions and this can be solved by the replacement.

• Tecra Z50 - Fingerprint already exists - how to remove all traces of fingers?

  My Tecra Z50 came with win 7 preinstalled.
  Before moving on to Win 8.1, I recorded 2 fingerprints.

  Then, once upgraded, not only 2 fingerprint to unlock windows does not, but I can't delete it.

  If I register other fingers, they work well, but I can't undo the 2 fingers recorded in win 7.
  The utility show me these 2 fingers are free to register, but when I do it says "Fingerprint already exists."

  How delete all THE recorded fingerprints and restart in a specific situation?

  Thank you very much

  Hello

  That would be helpful FAQ?

  [How to remove fingerprints from the fingerprint Scanner? | http://www.mytoshiba.com.au/support/items/faq/386]

  You can also try the [the fingerprint tool remove WBF TFPU | http://support.toshiba.com/support/viewContentDetail?contentId=4003856]
  This tool removes all the fingerprints in the fingerprint sensor if used.

  But beware: this software supports the AuthenTec Finger Print sensor only!

  Read also this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=67626

• prints print sensor does not

  Hello

  IM creates hp pavilion dm4 1265dx. running in os win 8. my finger print sensor does not not pls help me.

  Try to watch this video on setting up the fingerprint reader, let me know if you get any errors:

  http://WWW8.HP.com/h20621/video-gallery/us/en/customer-care/1253402949001/set-up-a-fingerprint-reader/video/

• Envy of HP dv6 7210TX: Validity Sensor does not not on windows 10

  I recently installed windows 10 and downloaded the validity on the site sensor but the sensor does not, what may be the problem and how to solve?

  @faisalabir

  Although there is not a Windows 10 validity driver for your system, Windows 8 driver can work.

  sp58900 validity sensor V4.4.234.0 W8 - W8.1

  To use the program SimplePass, know that before, you can do if you need complete a few items:

  Implementation / assign a PIN code in settings PC as if you are going to use Windows Hello.  The PIN code is necessary, regardless of whether you actually 'Hello' - requirement for the PIN code is an additional security that Windows has put in place.

  Without taking into account Simplepass, you want to get the native Windows logon work of fingerprints - while the Windows logon provides access to Web sites, it does not support connecting to your computer.

  Once arrived at the point where you're ready for SimplePass, you want to use the latest version of the program in the respective series.

  There are two different flavors of SimplePass:

  • Windows 7 through Windows 10: series 6 HP SimplePass V6.0.100.276 (AuthenTec)
  • Windows 7-Windows 10: series 8 HP SimplePass V8.01.46A and upward (Softex)

  These "flavors" are programs separated; You cannot 'upgrade' of series 6 to 8 sets - you can change the program from one genre to the other, that is, remove one and install on the other.

  -------------------------------------------------------------------------

  Help, suggestions and examples:

  HP SimplePass upgrade instructions

  Read the first page: Dragon Document guidelines

  Article (s):

  • Order of events is important
  • Procedure - updated / (install HP SimplePass Re)

  When you see a post that will help you,

  Who inspires you, gives a cool idea,

  Or you learn something new.

  Click the 'Thumbs Up' on this post.

  My answer-click accept as Solution to help others find answers.

• my laptop computer vpcsb16fg prints print sensor does not work

  I have sony vaio vpcsb16fg notebook and his impression fingerprint sensor does not work as I had sony remote India too but I was told that my laptop is having hardware problem, help and how this problem will be corrected.

  Hello Verhoeven.

  Try following the steps below and check if it works:

  Download and install the driver of fingerprints from here: http://download.sony-asia.com.edgesuite.net/vaio/downloads/Win7Original/20111Q/VPCSB/AUDFPD-00243103...

  Then, reinstall software TrueSuite software VAIO Care following all the steps here: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1017143

  Then, try to register a fingerprint and check if it works.

  Then, perform a restore of the system to an earlier time when it worked very well: http://www.kb.sony.com/selfservice/documentLink.do?externalId=C1003813

  Then, perform a full system recovery to restore your computer to factory settings. Restart the computer, keep pressing the F10 key continuously, press on enter key at the start of editing option, Recovery Wizard, select start and click on ignore VAIO Care rescue (if you do not want to back up data) to start the system recovery process.

  Note: It is necessary to backup all data before performing the system recovery as it erases everything from the computer.

  If the problem persists, contact Sony support team in your country to start the service: http://www.sony.net/SonyInfo/Support/

  Note: If my post answered your question, please mark it as an "accepted Solution".

• Pavilion dv6 Validity Sensor does not work

  Hello..

  I reinstalled my Pavilion dv6-3300se, reinstall all drivers. But there is a problem. Validity sensor does not work and SimplePass Identity software is not found, even if I can find (DDK validity sensors) (default programs). I reinstalled it milion times but no use of it.

  Althouth I downloaded the latest version from the support page of the drivers on the HP website for my HP Pavilion dv6-3300se, validity sensor no longer works

  NEED HELP FAST

  Hello

  An option to try and install the latest version of SimplePass on the link below.

  http://www.EgisTec.com/websitedownload/patch/BioExcess/RELEASE7.1BUILD5.9%20BIOEXCESS7.1B5.0-HP.zip

  It is a zipped file.  If you do not have an extraction utility installed, download and install 7-Zip , which can be used to open it so that you can run the installer - just click with the right button on the zipped file, select 7 - Zip, select extract files and click OK. Setup for SimplePass located in the newly extracted folder.  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• DigitalPersona U.are.U 4500 fingerprint reader biometric

  I can't do the scanner 4500 Digital to install on my computer running Windows 7 and the drive didn't come with any software disk

  Any material support, regardless of the operating system that you choose to run, is the manufacturer of the equipment.

  You say you have this device? :
  http://www.DigitalPersona.com/biometrics/hardware-products/U-are-U-4500-reader/4500-reader/

  Support could begin here:
  http://www.DigitalPersona.com/support/overview/

  According to the web page compatibility Windows 7 for the DigitalPersona U.are.U 4500 Fingerprint Reader biometric Center of the unit * is * supported... sort of.  I guess that digitalPersona has given Microsoft a driver to install with Windows 7 early on.  Involving it should find and install the driver when you plug it in.

  However, if it is not, the support is still to come from the same place.

• Passport for blackBerry proximity sensor does not work

  Hello world.

  I just got my new passport and it's great.  But the proximity sensor does not seem to work.  When I hold my face during a call the screen stays on and sometimes I press the screen options.  And when I use the flip on for power saving option, the screen lights up as well.

  everyone knows this, or am I just a loser?  Should I get reversed as it is during the first two weeks?

  To close out this thread if you are experiencing similar issues please reboot your device.

  For more details, please see the bulletin this KB > KB36375 The BlackBerry Passport sensors communicate is no longer with the BlackBerry 10 software. Thank you!

• BlackBerry Z10 proximity sensor and light sensor does not

  My proximity and light sensors do not work. The expert virtual blackBerry does not detect movements in proximity sensor test and shows that these sensors are available and not able to handle low light or high light sensor. What should I do when I contact blackberry help via twitter they sad you os version is superior who supported our carrier it's my fault I have to update when you ask me. there is no any direct contact of costumer care help email

  I think that this can be done through leaders of serivce center you should
  contact with them.

• U260: Ambient light sensor appears not functional

  Ambient light sensor does not seem to work even if enabled in the Lenovo power utility.

  Any ideas?

  (Windows 7 x 64, clean system)

  Thankx

  DJK

  This works. Maybe it worked right from the start, but I just does not recognize that. I'm sorry.