Why is my device not recognized ipod mini?

Similar Questions

• Device not recognized-to USB using Windows XP (sp3)

  The camera is on, I did not USB drive internal or external, the USB cable is a direct connection with the camera and the computer. I am running windows XP; I even tried on another laptop and at the end upward with the same message-USB device not recognized! This could be a software problem on the camera, or a bad set of USB cables? The camera is 2 years old and the cable have used about 6 times to transfer photos from the camera to the computer. When I tried on another laptop I got the following message: not properly installed device driver software! Is there a solution to this problem?

  Hi RigoSantiago,

  Follow these methods.

  Method 1: Install the drivers for the camera and associated software. Also, see the manual for more information.

  Method 2: Follow the steps in the article.

  Advanced troubleshooting tips for General USB for Windows XP problems

  http://support.Microsoft.com/kb/310575

  USB devices that are disconnected and then reconnected to a USB hub may not be detected on a Windows XP-based computer

  http://support.Microsoft.com/kb/920875

  For reference:

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?

  http://support.Microsoft.com/kb/314634

• USB problem-"USB device not recognized".

  Original title: USB problem

  I have a problem when I connect my nokia mobile to my pc via USB cable there is a display of msg of error "USB device not recognized.how to solve this problem? I tried all reboot pc, reconnect the device, format XP and reinstall.last night I was using a mobile navigation correctly with the same device same system same cable.i have tried driver re install but not fixed yet.i have Windows XP 3 intel p4.please help.

  Hello

  1. Are you having the same problem if you connect a drive flash or any other device?
  2. Have you tried plugging in Nokia mobile on another computer?
  3. Have you tried plugging it into different USB ports?

  I suggest you send more information to help you better.

  You can also refer to:

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive.

  http://support.Microsoft.com/kb/925196

  USB port may stop working after you remove or insert a USB device.

  http://support.Microsoft.com/kb/817900

  .

• Device not recognized USB message with iPhone 3g

  Here's the story from the beginning, I hope that I have provide sufficient detail.

  I got my iPhone 3 G is replaced. Therefore, a new phone... I went on iTunes in the middle of the restoration... It gave an error message and put my phone in recovery mode. Since my computer gives me the message "USB DEVICE NOT RECOGNIZED" and appears as an "unknown device" in Bus USB controller in Device Manager.

  I went to apple and they finished the restoration... I plugged the phone on other computers... It is therefore not the phone.

  Still nothing pops up... It keeps giving me "USB DEVICE NOT RECOGNIZED" I have uninstalled iTunes the right way... as Apple people walking through and reinstalled... the Apple Mobile Device is started.

  I still get nothing... everything is... newly installed... Windows doesn't recognize just... that it doesn't show up as a camera... and it does not even charge my phone.

  I tried different ports... and I get the same message... my camera and my sisters iPod shuffle connect correctly.

  I really need help! I don't know what else to do... I need to work on this computer. It's a Toshiba Satellite Windows Xp SP3

  I just went through two weeks of tampering with my 'old' computer trying to recognize my new 4370dn Canon multifunction printer after installing Windows 7.  I tried to reinstall Windows XP, uninstall the USB ports and hubs in Device Manager, update the printer drivers and several combinations of these elements.  In my case the ports would recognize external hard drives and flash drives, but my printer would come as a device not recognized.  Finally, what worked for me was to uninstall all the ports/USB hubs listed in Device Manager (they get automatically reinstalled with a soft reboot of the computer) again, download a driver from the Intel website (http://downloadcenter.intel.com/confirm.aspx?httpDown=http://downloadmirror.intel.com/16023/a08/infinst_autol.exe&agr=&ProductID=&DwnldId=16023&strOSs=&OSFullName=&lang=eng) chipset installation utility and restart the computer.  When I plugged the USB cable from the printer, the normal process of new device was launched.

• Peripheral shuffle not recognized-iPod USB - Vista

  Hello

  I have a laptop HP 6730 s that works perfectly since I bought it a few months ago. I recently bought an iPod shuffle 2nd generation. The device worked properly once. Neither the ipod nor any other usb device works now. There is an exception: my HP printer which is connected by USB, but has its own power supply still works.

  I get the error message "USB device not recognized", even if there is no at all connected usb devices.

  Thanks in advance for any help

  Andrew

  Andrew Russell,
  Thank you for visiting the Microsoft Answers community forum.

  We need to collect information to this issue.
  When you go into the Device Manager, the USB controller is displayed as working properly or does have a yellow exclamation mark on it?
  What is the error "USB device not recognized" appear - what happens when the mnessage appears?
  You have restarted the computer? (I know, stupid question, but some people don't do that)
  The same thing happens if the computer is running on battery or AC power?

  Here are a few things to try until we get more information from you:

  Rollup cumulative update for USB in Windows Vista Basic components
  http://support.Microsoft.com/kb/941600

  Try uninstalling the iTunes software, reboot, and then try another USB device to see if it works.  Sometimes iTunes can be damaged and cause USB problems.

  Let us know if any of these things help, and the answers to the questions, then we can also help you.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB device not recognized Vista

  All of a sudden my usb ports no longer work. I get a message that my USB device not recognized. I tried other cables without result. I used a Logitec USB mouse and was also download an iPod from itunes update. None of my USB ports work. I tried other devices also.

  Hi RandyPierce,

  Please see the thread with a similar problem and fix possible:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/USB-device-not-recognized-by-Vista/b2c712cb-19da-4fbb-aae2-29d4c5d2ad39

  I hope this helps!

• Bluetooth mouse stopped working & USB device not recognized error

  Laptop using Windows Vista

  I was using my bluetooth mouse when I plugged my mobile phone (via USB cable) in charge. I have done this before w/o a problem (perhaps in another USB Port, now that I think about it) but I did this time and I instantly lost the ability to use my bluetooth mouse and the "USB device not recognized" bubble popped up. Now, this window pops up almost every 10 seconds even with disconnected USB mobile phone.

  I went to bluetooth devices trying to pair my mouse w / new laptop and I can not. It's not show my mouse and when I go to Bluetooth settings and try checking the box (and pressing OK) under the discovery that reads "Allow Bluetooth devices to find this computer" it gives me an error saying that this is impossible.

  Help!

  The manufacturer of my hardware (bluetooth mouse) will not be able to explain why this struck dead window device unrecognized USB is coming non-stop. Above tutorials did not help at all.

  Hey wsdp

  "The manufacturer of my hardware (bluetooth mouse) will not be able to explain why this unrecognized USB device breath."

  ask them

  Walter, the time zone traveller

• Device not recognized USB error message - all USB ports.

  Apologies if all this seems a bit simple, but I'm not an expert, so bear with me.

  I have a laptop Fujitsu Siemens Amilo Li 1718.

  My USB ports have stopped working in 2-3 weeks.  I get the message "USB device not recognized.  One of the devices attached to this computer has malfunctioned and Windows does not recognize... »

  I don't seem to get any yellow exclamation point in device, all my drivers in Device Manager and software are up to date and Windows Update is running.

  My mobile phone and ipod always charge when I plug them in and out of this problem, everything works fine.

  In addition to the usual updates of Windows, only two other things have occurred since last, they worked.  One was that I renewed my subscription to Norton Antivirus, the other was that my laptop battery ran right out while he was in mode 'sleep' as I did not know that I had not plugged to the socket properly.

  So far, I went through some process as suggested by various items and/or help & support on Microsoft.com.  They include:

  * (From multiple locations) system restore has failed.
  * Diagnostic software Ran Fujitsu Siemens, which says that my computer is fine.
  * Run the virus scan who come clean.
  * Tries to connect via a USB hub.
  * Deletied the USB controllers in Device Manager to re - install.
  * Changing the settings of ForceHcResetOnResume 3-to-1
  * Change AdditionalCriticalWorkerThreads from 0 to 2

  (The last two I've changed back again after neither worked).

  My opinion of beginner, it's that looks like it will create new registry details for each device when valid seem to exist already is not thankful.  Although given my lack of technical knowledge, this could well be stating the obvious.

  So, now, I drew a blank.  Anyone got any ideas?  Got 9 months left a 3-year warranty, I don't want to go through the hassle if it can be avoided without too much trouble.

  Thanks in advance!

  Tim

  Hello

  Maybe these will help.

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Have you tried to use an external hub powered by USB power is very limited in a computer and if overloaded
  strange problems will come up.

  ------------------------------------------

  Even if you did some of this departure please up and work until low and if necessary check
  with the utility.

  Control Panel - Device Manager - click in the empty area - VIEW - show hidden devices

  Now look everywhere EXCEPT the USB controllers for your device (cannot be found) and if you find
  It RIGHT CLICK and UNINSTALL all. The device is your (s) or similar.

  now go to the USB and UNINSTALL ALL controllers in the category, but the category itself.

  APPLY/OK

  RESET

  This refresh battery USB and hopefully it will allow the unit to install. (You may need a powered hub)

  Here is the similar procedure under XP, Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer, as well as all
  USB devices that you previously used. Run Options and check the 1st three choices to see if one is there.
  Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• USB device not recognized when I connect my iphone to my computer

  Original title: USB device not recognized

  I get the error message "Unrecognized USB device" when I connect my iphone to my computer.  It is the same as the one I use for months.  Same computer.  Same sync cable.  I have changed everything, including hang iphone to my wife instead of mine and get the same message.  I also did a restore on my computer that doesn't change anything.

  Hello

  At this point, I think it's a good idea to run a scan for viruses/malware on the PC with the anti-virus software that you have installed.

  Also, if you haven't already, I would try removing the USB controllers and restart again, now that the updates of Windows are installed. Don't forget, you can even download the drivers directly from manufacturer support site for your PC, if they install automatically when you restart after their removal.

  Finally, take a look at the thread I linked below. The first answer is quite similar to that mentioned above in this thread, but there are also a few other really good measures listed there as well. Then take a look at the linked thread and see if that helps at all.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/USB-device-not-recognized-in-Windows-7/8106a712-A13E-4ca5-b82e-c3961cc254b1

• PRS-600 USB device not recognized

  I am unable to get ereader PRS-600 to be recognized by the computer (Win7).
  I tried to update the software (even if I think it's in)
  (date) but the window 'connect a PRS-600 to update' does not progress and the update button is dimmed.
  I deleted the "unknown device" in the drivers, but when I reconnect the USB cable and the ereader, I always get the display of device not recognized and the message "USB device not recognized".

  I seem to have solved the problem. I contacted Sony through esupport and a chat with a tech.

  Make sure that the battery has some charge inside. Completely charge if you can.
  Stop eReader (fully)
  Remove the SD card
  Press the button Reset (at the bottom of the ereader)
  Turn it on
  While the display shows "Open book", at the same time press the button to "turn the page" (back) and the Volume button until the "Reset All" + screen
  Enter 'Yes' to reset the ereader. You may need to configure the screen (X button with the tip to draw at various points)
  If you charge the battery, you may need to contact the support chat for sorting.

  Good luck!

• His number disappointed + B500 USB device not recognized at startup

  Hello

  We have 2 B500

  whenever I'm starting, after loading windows they give me an error "USB device not recognized" I don't know what to do any help will be greatly appreciated as it is strange that both machines are giving the same error.

  also on one of the machines the sound does not work, I tried to get out of trouble, the diagnostic says the speakers are working properly, but not her out at all.

  I'm kind of disappointed by these questions, we always buy at Dell, but we thought we would give Lenovo a chance, the machines were barely a few months, when the problem started.

  advice please?

  That error usually comes up when a non bootable USB device is connected. Check the Bios and make sure that the CD drive and HARD drive are loading first. That should solve your problem. If this is not the case, make sure that you don't have any USB stick or disk external HARD connected until the PC load.

• Satellite L30: Usb device not recognized

  I have a problem with my laptop L30.
  When I connect my phone or a flash drive or external hard drive, it is said: Usb device not recognized one of the usb devices malfunctioned.
  Tried to reinstall windows did not help...

  is there a solution?

  Hello

  Hmm. First of all, you should unplug all external USB devices.
  Then go to Device Manager and remove it all concentrators root USB and USB host controllers.
  Reboot the laptop.

  After this procedure, the operating system should recognize and should install new ports.
  Now you can connect to a plug - and play instruments. These devices should be recognized automatically. But some external USB devices need additional drivers.
  Usually these drivers are provided with the USB device.

  I would recommend this review if necessary!

• USb device not recognized / Power surge on hub port

  I don't have the slightest idea what happened here, but when I plug my defy in a PC all I get is 'USB device not recognized '.

  and I can't connect to usingf a P.C.

  Ive tried to re-satring the phone and the PC, ive tried also in another PC and it did the same "USB device not recognized"

  Ive tried to download the drivers, restart Phone bot and Paolo and still "USB device" unrecognized on the two p.cs.

  Ive also tried the USB debugging on the phone mode, but after a short pause, "Unrecognized USB device"

  
  

• mass storage device not recognized

  my computer does not recognize a storage device. How can I solve the problem.

  I found the answer under "related topics - USB Mass Storage Device not recognized " and it solved the problem!

• USB device not recognized. unknown device

  USB device not recognized, peripheral unknown.  I can not connect any USB

  If no USB device does not is that you need to install drivers of motherboard (chipset) or your USB ports on the motherboard failed. Since you have told us nothing about your computer, it's as specific as I can get. See the links in general troubleshooting below and if they do not help, post back with the missing information by:

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  Troubleshooting USB by Uwe Sieber -http://www.uwe-sieber.de/usbtrouble_e.html

  General USB troubleshooting in Windows XP -http://support.microsoft.com/?kbid=310575

  MS - MVP - Elephant Boy computers - don't panic!