Why MSAccess database displays data but doesn't show columns and DDL mode in jdeveloper edition?

Similar Questions

• Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar...

  Using firefox 14.0.1. Load a link using the right click and "Open link in new window", translates into a new window opens but doesn't show URL address bar. However, if I click with the right button on a link and select "Open link in a new tab", the tab displays the URL in the address bar. If it works when a new tab it's not in a new window.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• insterted my IBM & reg travelstar 2.0, it is recognized as being plugged but doesn't show on the control panel and I can't access it.

  insterted my IBM & reg travelstar 2.0, it is recognized as being plugged but doesn't show on the control panel and I can't access it.

  I don't know what to do because he has all my work on it. An error report has been sent to me by saying: "Windows has detected a new device attached to your computer, but could not find the driver software, make the device usable. Each device manufacturer typically includes the driver from a CD that comes with the device, or for download on its Web site. Your device hardware ID is ACPI\HPQ0006. »

  What should I do?

  Hi Rachael7861,

  1. have you installed the latest drivers for the hard disk, mentioned in the previous post?

  I suggest that you connect the hard drive to another computer to check if it is broken.

  Also check in Device Manager for the status of the hard drive.

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My pen drive data but doesn't appear

  My USB has the data, but does not not to how to solve this problem see the data size in the space used

  Try to access them cmd in safe mode: press F8 on startup to enter the mode safe mode with command prompt and type these commands

  
  1 dir / ah (list all hidden file/dir)
  2. h s - r - one attrib *. * (will make all of your visible file/dir)

  go and find all your files/directories using Windows Explorer, copy here where you want.

  Concerning
  David

• Just bought it does not have Media only to convert PC recognizes but doesn't show any info

  OK, so I bought this for my husband for Christmas. I was going to download a lot of music and pictures and stuff before I sent it him. Well, I'm very disappointed. When I plugged it the first time it my computer has detected it and when I click to open it and view the files everything was... Well, I tried to add a few photos and things and discovered nothing was going to be compatible so I dissconnected downloaded the Media Converter and plugged back in. Well this time my computer says that there is some sort of error on hardware and it does perhaps not properly right now when I open the Sandisk Sansa Fuze my computer the folder is empty complelty.

  OK well though I decided to simply ignore that and try to convert some media, well I'm following the steps and everything but it won't let me click on convert it is not clickable... I'm trying to add and convert a JPEG taken with my digital camera.

  I really thought that I had stumbled on a great product after reading the reviews, but no, I'm not sure.

  I wanted you to know that I am running Windows XP

  Does anyone know how to solve these problems please help.

  (Music) files placed on your drive in USB mode (let's say the PSG) won't be visible by you on your computer while the player is connected to the other mode (MSC). And vice versa.

  Why it is so preferable to choose 1 USB mode and stick with it to avoid confusion. MSC works the best and easiest, unless you really have some urgent need for PSG, as DRM-encrypted files (Rahapsody, Napster) or 'borrowed' audio books from the library (Overdirve, etc.).

  It could be something else... you see a folder of MUSIC? It's usually "hidden" by default. You will connect to your computer, then open Windows Explorer and go to TOOLS, folder... Options and click the tab VIEW scroll down and check the "show files and folders.

• DataTemplate not display data, but showing the right amount of lines

  I just started to use Datatemplates to convert our answers on Publisher reports. Basically, I use the PASS-THROUGH method BI Server.
  Copy the SQL from the SQL field advanced in BI answers.
  Place the new SQL in DataTemplate
  Construction DataStructure
  
  It seems to a sufficient quantity of lines, but no data is displayed. I checked the data multiple times for misspellings and other simple items but I'm not. It seems to make a connection very well, but it does not show and value in data elements. It returns 6 empty lines.
  
  Attached XML example:
  < name of dataTemplate = "FiveDayCo" defaultPackage = "" than one dataSourceRef = "OracleRPD" > "
  Properties of <>
  < property name = "include_parameters" value = "true" / >
  < property name = "include_null_Element" value = "true" / >
  < property name = "include_rowsettag" value = "false" / >
  < property name = "scalable_mode" value = "off" / >
  < property name = "db_fetch_size" value = "300" / >
  < / properties >
  < Settings / >
  < lexicals / >
  < dataQuery >
  < sqlStatement = "COOR" name > <! [CDATA [SELECT "-match". "% response time of 5 day correspondence" "saw_0, 90% ' saw_1," "-correspondence".]] "% Response time of 5 day match"-90 saw_2,""-match details "". "" Type of correspondence' saw_3 OF finance WHERE ("-match details". "") (Match type' IN ('Customer Service', 'Systematics', 'Not available', 'Privacy')) AND ("Business Unit". ("' Business unit ID" = 6.00) AND ("'-record details" "." ") Record type' = 'Core') AND ("-matches details". "") (Correspondence of State' <>'closed') AND (("-primaire terminé Date prévue".)) "" Primary year expected "= cast (YEAR (date '' 2010-07-01) as char (4))) AND (" "-Date completed expected primary" "." ")" Primary planned calendar month "= MONTH (date ' 2010-07-01'))) [ORDER BY saw_1, saw_3]] > < / sqlStatement >"
  < / dataQuery >
  < dataStructure >
  < group name = "Coorespondence" source = "COOR" >
  < element name = "FiveDayCoorespondenceTime" source = function "saw_0" = "" / >
  < element name = "ValeurIPC" source = function "saw_1" = "" / >
  < element name = "Variance" source = function "saw_2" = "" / >
  < element name = "CoorespondenceType" source = function "saw_3" = "" / >
  < / Group >
  < / dataStructure >
  < / dataTemplate >

  A few things to check. The sql by itself returns the data?

  Also, you need the following: ? If a package is not used/needed, remove the reference.

  The following tag should suffice.

  Your datastructure code must be: (for the name of the element using the value (instead of source =) and I removed the syntax of the function since you don't specify any function like sum, average)

  
  
  
  
  
  
  
  

  For a reliable data model reference, check the following: http://blogs.oracle.com/xmlpublisher/2009/06/data_template_progression.html

  Hope that helps!

• Windows 7 turns the display off, but doesn't go to sleep

  My Windows 7 will not more in mode 'sleep'.  It will turn the display at 5 minutes (by the Power Options settings), but it won't put the computer to sleep after 30 minutes.  The screen is off, but the hard drive flashes.  The power light on the computer is turned on, not the sleep mode color amber.

  If I choose Start, stop, sleep, the computer enters mode "Eve".

  How can I get the computer to go to sleep automatically?

  Follow the below mentioned steps to solve the problem:
  1. click on start and open Control Panel.
  2. open Power Options then select the option to change when the computer sleeps.
  3. click on change advanced power settings, under Multimedia settings make sure that you don't have to stop the idling to sleep

• Process of Firefox starts but doesn't show main window

  Hello

  Since a few days, I can't start Firefox. The beginning of the process, but hangs with a memory fixed space and zero CPU usage, and the main window simply will not start. No accident report is created. Kill the process and try again is the only option.

  I tried to start Firefox as administrator, which works (but is not recommended from a security perspective), and the fact Firefox start when Windows is in safe mode. Firefox also starts when TrendMicro OfficeScan processes are stopped, but it is hardly a solution in a commercial environment, be admin on my machine is already a special case.

  Periodically, events, Firefox starts, but the next time that the issue is back.

  After trying several methods of troubleshooting, I tried to perform a clean installation, nothing helps:
  -Remove Mozilla of App Data records (roaming and local)
  -Uninstall Firefox
  -Remove possibly remaining Mozilla Firefox in Program Files (x 86)
  -Run CCleaner
  -Restart
  -Re-install

  Currently I am looking in a procedure that could help me determine with certainty if OfficeScan is actually guilty and try to prove to my IT Department in order to the make degenerate into TrendMicro. Of course, if OfficeScan is not guilty, to find that a solution would be too perfect...

  System information:
  -Windows 7 Enterprise SP1
  -TrendMicro OfficeScan
  -Firefox latest version, 40.0.2 for the moment, the stub Installer.

  An alternative to consider is the Extended Support Release (ESR) version of Firefox? It is based on Firefox 38 but receives security patches at intervals similar to the standard version. Enterprise software providers can use this trial version (I guess they test...).

  You can learn more about ESE here: http://www.mozilla.org/firefox/organizations/

  To install it, I suggest:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (not incompatible, corrupt or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (A) download a fresh Installer for Firefox 38.2.0esr of https://www.mozilla.org/firefox/organizations/all/ in an ideal location. (Scroll down your preferred language).

  (B) the release of Firefox (if any).

  (C) to rename the program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\Fx40
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\Fx40
  

  (D) run the installer downloaded to (A). It should automatically connect to your existing settings.

  Install and run?

  Note: Some plugins can only exist in the old folder. If it is missing something essential, present in these files:

  • \Fx40\Plugins
  • \Fx40\browser\plugins

• Why is the "purchase Date" for my tracks showing that 25/08/1974?

  I just bought a few albums off the coast of the iTunes store and for some reason that the date of their purchase appears in the column as the 25/08/1974...

  Can someone tell me why this is?

  iTunes 12.4.1.6

  Thank you

  Harvey

  Harvey, I get the same date. 25/08/2016

• Using firefox 26 beta, Windows 7; Adobe flash player11 loaded, but doesn't show is not in the list or the agifts running? I tried to recharge, help etc! not

  I run Windows 7, with Firefox (beta) charged 26. Tried to play the video "Bones" on Fox homepage and you need Adobe Flash Player (AFP). Downloaded and executed/uninstalled the AFP several times; whenever it appears on my hard drive, but it does not appear on my list of Firefox ad - ons? If I then try to play a video on Fox, it warns me that AFP is not installed? I'm frustrated - I read all posts on this problem, either something is "weird" and I missed it, or I do not understand the available corrections. I have not had any problems at all with Firefox until these latest two updates? I have not been invited to support AFP up to now - the Fox network has changed their requirement of video player? I certainly remember watching videos on their website months ago... Would be to uninstall and install a fresh copy of Firefox help? I'm grabbing at straws here... Thank you

  Hello

  According to the details of your system, you have correctly installed the latest version of Flash. A clean install (and then reinstall the Flash Player) can help as you suggest. But first, I would try to clear your cookies and cache (see below). In addition, you may need to restore the last full version, Firefox 25 until this issue is resolved.

  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• tracing of dynamic data but the diagrams showing the previous acquired data too

  Hi, I'm developing a curve of voltage signal at the same time as it is acquired by the computer of the amplifier to locking SR830. I used a XY trace and placed inside the loop, where the data are acquired.

  Please find the attached VI.

  Cory K wrote:

  Altenbach says:

  The express VI 'built the xy graph' has an entry "reset?" Wire a real in order to reset the internal data. In your particular case, do a '= 0' on the final iteration of the Interior for the loop and thread it reset entry.

  Now I'm confused. He does not want to keep the previous data or not?
  He made it seem like it's getting only 1 point in the chart, but he wants to keep all the data in the chart

  Sorry, my post was incomplete. You must double-click the express VI 'build xy graph' and uncheck'erase data on each call.  Easy enough?

  

  Whenever you want to start over, thread a real for the reset entry to clear the history.

• HP2000: HP 2000 display black but the screen showing all

  my laptop is hp 2000. its having problem with the display. While power on nothing, we can see on the screen, but other fine work (fan, caps lock, shift, wifi light, etc.) after that I can see Variant simplified on screen. I found any display on screen, but we cannot see. If we put a light tourch on screen, we can see the content. After I pass my turn and turn again and close the lid and display suddenly open came as usual. Once again, if it goes on standby or shutdown even mode problem will rise again. whenever I have to close the lid and open at the beginning... someone tell what is the problem on this... How can I solve this problem.

  @KRISHTVM1,

  Hello and thanks for the display on the HP support forums.  Please post back with the complete model and the product number of your laptop.  This will help me get you the link of your interview guide.

  The problem you are experiencing is cable going to the screen or the inverter.  It has come loose or broke.

  Here is a link to help you with that.

  Computers how can laptops HP - I find my model number or product number?

  Please post when you have a chance.  Thanks again for the post and have a nice day

• Why is 'Use different data stores for disks of BONE and View Composer persistent' grayed out?

  I installed 5 (cluster host 2) vsphere, vcenter 5 discover 5 and openfiler (iSCSI VSA) in vmware workstation 7.

  I am trying to simulate a tiered storage configuration and created three warehouses of shared data in order to separate the replica, the linked clones and persistent disk.

  However, when I create my bound clone pool I am able to select a specific data store for the replica and bound but clone the persistent disk option is grayed out.  See photos attached to the pool creation, storage, and network configuration.

  Has anyone any suggestions?

  Thank you!

  Yes, the use of the disc for operating system profiles require a linked clone pool.     The operating system will be on the clone, persistent disk will be a disc loaded end service that survive refreshes and redials, and then the replica will be reading only one copy of the master image.    The replica in general has in the IO and is almost always placed on the SSD or storage faster than you have and the persistent data disk is usually low IO.

• export indesign file in pdf format - why is - a background on 120 doesn't show?

  I been exported a long document in pdf; the various funds of 120 pages display in the pdf viewer, but the latter "spreads" do not show the background color. Is anyone have an idea what could caused it?

  Thank you much for the help!

  Angelika

  There are a number of things.

  It could be on a nonprinting layer.

  The background can be assigned to non-printing in Windows > attributes are, of course, that not printable because the framework is not lit.

  Try to make the background so that half of it is on the left page and the other half is on the other side, you can do this by duplicating the frame and pass half left of column vertebral and even on the right side, who will retain his position.

  It could be a corrupted file, so file > export and choose Indesign interchange, open the .inx file it creates (it opens without title), and then try exporting again.

  Maybe the background has a mode of fusion or something, to turn on overprint preview and view the pages in question to see if something strange happens.

• SP1 for Vista is installed but doesn't show is not in the computer properties

  Reinstalled Vista professional to replace the update to Windows 8 Pro incompatibility with my hardware. Update SP1 installed successfully several times, but always not shown in 'The computer properties' SP1! By thus impossible to reinstall Norton Security because there are installed SP1.

  From Internet Explorer

  Original title: SP1 for Vista Business

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  He will tell you he which SP you have installed. so, it is not installed.

  Choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.