Why my its scanning periodically?

Similar Questions

• Why do its says could not contact a reliable source?

  Why do its says could not contact a reliable source?

  What is your operating system?

  What you're trying to download?

• Why Microsoft Security Scan detects TrojanSy:win32 / Banker.SW but do not delet it

  I have the scanner provided by Microsoft, itdetects TrojanSy:win32 / Banker.SW, but do not delet it, WHY IS the following, AND WHAT to DO to DELET THIS VIRUS

  Download the free version of this tool. Look for updates and do a quick scan first. It will take a few minutes. She will most likely find the Trojan horse and allow you to remove it, but make a full analysis later to be sure. It will take 1 ~ 2 hours.

  Malwarebytes Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

• Why can't scan text in a PDF Document in Windows 7?

  I recently bought a new laptop with Windows 7 Edition Home Premium preinstalled.  I use a HP Laserjet 3055 multifunction device as my scanner.  I do a lot of scanning.  With my previous Setup and Windows XP very well worked, quick and reliable scanner.  I do mostly from documents by scanning in the form of pdf files.  With Windows 7, there is a function of scan and fax in the start menu.  The scan function does not provide a pdf format, only .tiff, .jpeg, etc..  Despite this, Adobe on its website indicates that Windows 7 is completely compatible with AdobeReader 9 which is the pdf program I work with that.  I know that the reader do not create pdf documents but in my old configuration, I used 7 Player and never had a problem of scanning hard copy as a pdf document.  Can someone help me?

  It would have been a function of the software provided with the scanner.
  The scanned image has been wrapped in PDF or OCR software there that output in pdf format.

  Check with HP, if your old software will work. I doubt it and think that you will have to find programs to create PDF files you want.

  Adobe Reader, in any version, has nothing to do with the way that PDF files have been created. It's just a program used to display.

• Why "FULL TABLE SCAN?

  I have a table with 831 k lines and index:

  CREATE TABLE "ROGADM"."ROG_LOG" (
      "LOG_ID"       NUMBER(10,0),
      "LOG_OBK_TYP"  VARCHAR2(30 BYTE),
      "LOG_OBK_ID"   VARCHAR2(200 BYTE),
      "LOG_TYP"      VARCHAR2(30 BYTE),
      "LOG_RODZAJ"   VARCHAR2(30 BYTE),
      "LOG_R_OBK_ID" VARCHAR2(200 BYTE),
      "LOG_DATA_ZDARZENIA" DATE,
      "LOG_OPIS_ZDARZENIA" VARCHAR2(4000 BYTE),
      "LOG_UTWORZYL"       VARCHAR2(30 BYTE),
      "LOG_KIEDY_UTWORZYL" DATE,
      CONSTRAINT "LOG_PK" PRIMARY KEY ("LOG_ID")
  );
  CREATE INDEX "ROGADM"."LOG_I" ON "ROGADM"."ROG_LOG" (
      "LOG_OBK_ID",
      "LOG_OBK_TYP",
      "LOG_TYP",
      "LOG_RODZAJ"
  );
  CREATE INDEX "ROGADM"."LOG_I2" ON "ROGADM"."ROG_LOG" (
      "LOG_R_OBK_ID",
      "LOG_RODZAJ"
  );
  CREATE UNIQUE INDEX "ROGADM"."LOG_PK" ON "ROGADM"."ROG_LOG" (
      "LOG_ID"
  );

  When I run of EXPLAIN PLAN for the sql:

  SELECT log_obk_id FROM rog_log;

  the output is

  PLAN_TABLE_OUTPUT
  Plan hash value: 3822058985
   
  -----------------------------------------------------------------------------
  | Id  | Operation         | Name    | Rows  | Bytes | Cost (%CPU)| Time     |
  -----------------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |         |   831K|  8122K|  2240   (2)| 00:00:27 |
  |   1 |  TABLE ACCESS FULL| ROG_LOG |   831K|  8122K|  2240   (2)| 00:00:27 |
  -----------------------------------------------------------------------------

  Why?

  You have an index on the LOG_OBK_ID column. But when you select this column see you FULL TABLE SCAN and no index is used.

  This is because you have not set your column as NOT NULL value column. Oracle stores a NULL value in the index. And that is why when you query the table for LOG_OBK_ID he goes to the table and does not use the index.

  See the example below

  SQL> create table my_test ( object_id number not null, object_type varchar2(100), object_name varchar2(100));
  
  Table created.
  
  SQL> create index my_test_idx on my_test(object_id, object_type);
  
  Index created.
  
  SQL> insert into my_test
    2  select object_id, object_type, object_name
    3    from all_objects
    4   where rownum <= 100000
    5  /
  
  50058 rows created.
  
  SQL> commit
    2  /
  
  Commit complete.
  
  SQL> exec dbms_stats.gather_table_stats('KARTHICK_PATTABIRAMAN','MY_TEST',cascade=>true)
  
  PL/SQL procedure successfully completed.
  
  SQL> explain plan for select object_id from my_test
    2  /
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display)
    2  /
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 720752151
  ------------------------------------------------------------------------------------
  | Id  | Operation            | Name        | Rows  | Bytes | Cost (%CPU)| Time   |
  ------------------------------------------------------------------------------------
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  |   0 | SELECT STATEMENT     |             | 50058 |   244K|    36   (0)| 00:00:01 |
  |   1 |  INDEX FAST FULL SCAN| MY_TEST_IDX | 50058 |   244K|    36   (0)| 00:00:01 |
  ------------------------------------------------------------------------------------
  
  8 rows selected.
  

  See the index is used. Oracle considers the index as a Skinny table version and do a FULL scan on the INDEX and not on the TABLE.

  Now, let us remove the NOT NULL constraint and see what happens.

  SQL> alter table my_test modify object_id null
    2  /
  
  Table altered.
  
  SQL> desc my_test
   Name                                      Null?    Type
   ----------------------------------------- -------- ----------------------------
   OBJECT_ID                                          NUMBER
   OBJECT_TYPE                                        VARCHAR2(100)
   OBJECT_NAME                                        VARCHAR2(100)
  
  SQL> exec dbms_stats.gather_table_stats('KARTHICK_PATTABIRAMAN','MY_TEST',cascade=>true)
  
  PL/SQL procedure successfully completed.
  
  SQL> explain plan for select object_id from my_test
    2  /
  
  Explained.
  
  SQL> select * from table(dbms_xplan.display)
    2  /
  
  PLAN_TABLE_OUTPUT
  --------------------------------------------------------------------------------
  Plan hash value: 1615681525
  
  -----------------------------------------------------------------------------
  | Id  | Operation         | Name    | Rows  | Bytes | Cost (%CPU)| Time     |
  -----------------------------------------------------------------------------
  |   0 | SELECT STATEMENT  |         | 50058 |   244K|    67   (0)| 00:00:01 |
  |   1 |  TABLE ACCESS FULL| MY_TEST | 50058 |   244K|    67   (0)| 00:00:01 |
  -----------------------------------------------------------------------------
  
  8 rows selected.
  
  SQL>
  

  See oracle now goes for FULL TABLE SCAN.

• Why my scanner scan only certain sections of a document?

  Printer: HP Envy D411c 110 series.

  When I scan as part of 'document', it scans the whole document and the text is fine, but the pictures are unreadable.

  Thus, to search for pages containing the text and images, I scan through the 'photo', the image quality is good, but only a small part of the document is scanned.

  When I select 'Preview' in the 'photo', the image displayed on the small screen at the front of the printer displays the entire document, but when I go to scan and save, the result is only a small part of the document (useless).

  There seems to be no rare menus seetings of the printer I can find that control the amount of a document that is scanned, so what's the problem?  My product is defective?

  I remember that it works correctly when I bought it first, but unfortunately, I have not tried scanning yet so far, and my warranty expired, so I am disappointed and frustrated with this HP product.  I hope you can help solve this problem.

  Thank you

  N

  Hello
  The default analysis workflows configured to scan photo 6 x 4 in. make sure you change the scanning settings to not crop the area swept as follows:

  If you use Mac OS X 10.7 (Lion), make sure to install the critical update below, otherwise skip to the next step:
  http://FTP.HP.com/pub/softlib/software12/COL41827/MP-101648-1/HP_Scan_for_Mac_OS_X_10.7_Update.dmg
  
  Now change the settings as follows:
  1 open the HP utility and select your device.
  2. based on Scan Settings open the "Scan to Computer".
  3. click on the tab "scan tasks.
  4. Select the shortcut Scan allows to analyze, and then click on edit.
  5. in the section of scanning from an HP device, click the blue triangle to expand the menu.
  6. in the expanded menu now, open the drop down next to cultures in and set as none.
  7. click OK and try to scan.
  
  Kind regards
  Shlomi

• Why does my scan of source memory run twice? * Keithley 2400 * SCPI *.

  The purpose of my VI is to perform a scan of the voltage across 6 distinct features of solar cells both in the dark State and with a light on. To do this, I'm first loading this scan on the Keithley 2400 and saving in the memory slot 1.

  (Please ignore the _s. I needed to insert it so that the code would not be filled with emoticons...)

  * RST
  * CLS
  * SRE 1
  : _STAT:MEAS:ENAB 512
  : _SOUR:CLE:AUTO ON
  : _SOUR:FUNC VOLTS
  : _SENS:CURR:_PROT 0.1
  : _SENS:FUNC:CONC ON
  : VOLT FORM: ELEM, CURR
  : _SOUR:VOLT 0
  : _SOUR:_DEL 0
  : _SOUR:_SWE: SOUNDED BETTER
  : _SOUR:VOLT:MODE SWE
  : _SOUR:_SWE:_SPAC LIN
  : _SOUR:VOLT:_STAR-0.5
  : _SOUR:VOLT:_STOP 2
  : _SOUR:_SWE:_POIN 100
  : ARM: COUN 1
  : TRIG: KEY
  : TRIG: COUN 100
  : TRAC: _POIN 100
  : TRAC: FEED DIRECTION
  : TRAC: FEED:CONT NEXT

  : _SOUR:MEM:_SAVE 1

  So I call on this scan of source memory later in the program with these commands:

  : _SOUR:MEM:_POIN 1
  : _SOUR:MEM:_STAR 1

  : INIT

  For some reason, the Keithley 2400 sweeps twice whenever I want to scan once. In other words, it makes dark 1 unit, then peripheral dark, 1 * delay *, light from the device 1 and then peripheral light 1...

  I get only a data set each time, so I know not what scan data are reported. This is important because reads the scan sometimes did something for the solar cell, so I don't know if the data I collect is the first or the second sweep.

  My VI and subVIs are attached, please take a look at them and give me your impressions.

  Thank you

  
  

• I would like to know why the its speaker jack on the back of my computer for headphones won't work, only the build in the President, why?

  I would like to know why Jack speaker sound in the back of my computer for headphones or stereo speakers won't work, onlt the build in the President, why?

  Hello DaleWhitenect,

  This thread has been created in the Feedback forum. the moderation of Microsoft team has moved this thread to the hardware and drivers Forum.

• Why all my scans want to save under the same name of the old file?

  Whenever I'm doing a scan, he invites me to save the scan to an old file that I used several months ago!

  How can I get rid of this file name and replace it with the word "scan" as it did when I first came to this printer?

  Hi joanne322 and welcome to the HP Forum,.

  I understand that you do not want to change your default scan file name. I'll try my best to guide you in this.

  If you have not created your new analysis file, please create one.

  If you have the old Solution Center follow these instructions: click on Scan - click on change settings - click on save to save the file Options - go to the save location and click Browse and locate your new analysis file and click - click OK

  If you have the latest version of the wizard of the printer, follow these instructions: click on scan a Document or a Photo - click advance settings - click the Destination tab - go to the save location and click Browse and locate your new analysis file and click - click OK

  If it does not you could please send me your model number so that I can better guide you.

  I hope this information can help, let me know how it goes.

  Thank you

• Why can't scan with my MF1450 on my Windows Vista? The printer works.

  When I run the "test" option that appears when I open Control Panel Scanners & printers, it is said that she read the scanner. But when I try to scan, I get a message telling me that the drivers are not installed. I did a standard installation, when 3 years ago, I bought the mf machine and it still printed, but I could never analyze. I'm afraid to redo the installation disc, afraid he might stop printing. Also, I went to the site of Cannon and downloaded drivers, I thought he said is went with my machine, but it still gives me the same message. I still have my original softward installation disc supplied with the machine.

  Get in touch with support of Canon for additional support:

  Canon support
  http://www.USA.Canon.com/Cusa/support

• Why can't scan my document with my printer hp deskjet 2050A

  Dear microsoft, I can't scan a document with me hp 2050 deskfet has.

  Hello Ella,.

  Thanks for posting your query on the Microsoft Community.

  According to the description of the problem, you are unable to scan your document with the HP Deskjet 2050 printer. To scan a photo or a document from the Control Panel on your computer, make sure the computer is turned on, the long printer driver is installed and the HP printer is connected to the computer with a USB cable, a cable network (Ethernet) cable, or on your local wireless network. If one of them is missing then it might be a chance that it will not scan.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. It was working fine before? If Yes, did you significant changes before the show?
  2. Are all the device drivers and updates of Windows updated?

  Try the steps in the following methods and see if it helps you to solve the problem.

  Method 1

  This tutorial is designed to help you identify and fix common printer problems in Windows, including print errors, print spooler errors, and other issues that could prevent you from printing.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2

  If the problem persists, I recommend that you completely uninstall the part-time driver that has been installed on your computer and then download the latest driver on the printer again manufacturer site.

  Step 1: Try to remove the printer by following the steps described in the following Microsoft Article.

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Step 2: Find and install printer drivers in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  Additional information:

  You can consult the HP article to know how to scan a document.

  How to perform a scan: from the control panel

  Get back to us with all the required information and the result of proposed suggestion, we will be happy to help you further.

  Kind regards

• MSE does not complete its scan - blue screen of death

  my laptop has been running and playing pandora through chrome. I came back to it and saw a blue screen of death. immediately, I restarted and opened the MSE. went to "Refresh" for the latest definitions. ran the scan. at about 99% completion, the machine restarts and says windows (I'm using win 7 pro) is not stopped correctly. I start again normally and try to re-run the MSE. same thing happens to about 99% scanned, it restarts and says the same thing all over again. I noticed that my MSE changes color at the top of the screen to yellowish and said that your computer is not protected.

  Help, please. Thank you, Steve * address email is removed from the privacy *.

  Moved from the center of Community Participation.

  Hello

  1. What is the exact and full blue screen of death error?
  2. Do you have other security software installed on the computer? You have installed don the computer registry cleaners?

  If you have another antivirus software installed, then the most likely reason for this problem is that you have installed entirely or partially on the PC security software conflict. Remove all other computer security software. You may need to use a cleaning tool to remove your previous security software.

  Also, make sure that the PC clock and calendar are correct.

  If this isn't the case, then you will have to uninstall/reinstall MSE.

  You should be able to remove MSE of the control panel. Uninstall problems see: http://answers.microsoft.com/en-us/protect/forum/protect_start/uninstalling-mse/a63b8c4b-58ed-437e-8086-fa08d80725a4

  It is best if you restart the computer to make sure that uninstall is finished.

  You can download a new Installation of MSE file from http://www.microsoft.com/en-us/download/details.aspx?id=5201

  Please return to the State of the question.

• Why can't scan to PDF with acrobat reader dc

  I've recently updated to Adobe Reader and can no longer scan documents to pdf format. I can scan tif or jpeg not a pdf file.  I heard that I have to buy something from Adobe that will allow this function. Is this true?

  REader NEVER did this. But maybe your scanner came with scan-to-PDF software.

• Why my printer scan used

  I can't get my scanner to work

  Judy Doane

  Hello! Could you please provide more information about your question? (What scanner/printer/aio) Additional information will be useful! Thank you.

• Why my player scan legal size paper without cutting down?

  All of a sudden, my drive stopped reading legal-size documents and analyze these files only in the format letter.  Is it possible to set it up.  It was working fine before and now it does not work.  I have Adobe Reader DC. @

  Hi sandyg8629,

  It is the feature of your scanner. Try to uninstall & reinstall scanner drivers.

  Kind regards

  Nicos