Why my printer not respond to commands from the computer

Similar Questions

• Epson Stylus Color 400 is unresponsive to commands from the computer

  Although it worked fine for the past three years, my Epson Stylus Color 400 suddenly stopped to respond to commands from the computer.   I have checked all connections and assured cartridges are full and OK.   After turning off the power and unplug the printer from the computer, then press the power button and the power button together and then release the two buttons (all according to the Epson manual) prints a number and alignment to check properly.   What did I miss?

  Hi Brian,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, that this printer is not responding.

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  Do you get any error messages?

  This problem can occur if the cables are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates, and problems related to the printer.

  Method 1:
  First, let's run this fixit who will help resolve the problem.

  Diagnose and automatically fix problems printing and printer http://support.Microsoft.com/mats/printing_problems/

  Method 2:
  If the first method does not resolve the problem, you can try the procedure described in the article and check if it helps.

  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Check out the link for more information.

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with printing, I'll be happy to help you. We, at tender Microsoft to excellence.

• Why Panel does not KeyBar 1.8 from the list toolbar?

  Remove knob remove not toolbar KeyBar 1.8 in Control Panel.

  Hi Frank,

  1. what happens when you try to uninstall the program?

  2. do you get an error message?

  3. are you able to work with the specific program?

  The list of currently installed programs in the Add / Remove Programs lists all compatible Windows programs that have a program Uninstall or feature. Sometimes, a program may not be removed completely, and remains the registry key that is used to display the program in the currently installed programs list. In this case, you may need to manually remove the program in the currently installed programs list in Add / Remove programs.

  You can try the Fixit and if it fails, you can proceed to method 2.

  Method 1:
  

  You can run the Fixit and follow the steps:

  Reference:

  Solve problems with programs that cannot be installed or uninstalled

  http://support.Microsoft.com/mats/program_install_and_uninstall

  a. click on "accept".
  b. Select 'detect problems and apply the patches for me.
  c. Select "Uninstall."

  d. Select the program from the list and try to uninstall it.

  Now search for the question.

  Method 2:

  How to manually remove programs from the add tool / remove programs

  http://support.Microsoft.com/kb/314481

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  KB322756 http://support.microsoft.com/kb/322756

  Hope this information helps. Response with status so that we can help you.

• Why can I not use applications downloaded from the Internet

  I downloaded Open Office and I get an error message that I cannot use the applications downloaded from the Ap Store.

  How can I change this?

  Mary Lou

  CTRL-click it and choose open. Otherwise, open the security & confidentiality of system preferences, click the general tab, unlock the pane and change the setting to a less restrictive.

  (137111)

• Why I have not received e-mails from the last 2 days?

  It seems that my account has been hacked. All my contacts were deleted and some of my emails from my inbox sent have also been removed. Quite simply, I can't receive emails. I tried to use my son's account to see if there is no message, but nothing whatsoever, just, I don't get the emails. What can I do to start getting emails again and maybe even get all my contacts back?

  Send you an email and see if you receive?  If this isn't the case, then there are probably a problem with your account.   If you get it, you may have no emails in the last 2 days (or if you are unsure that you did, just on).  If you use an e-mail program, go to the place on your online account and see if the emails are there - then the problem is that they are not transmitted for some reason any (it could be your e-mail program or it could be the provider - difficult to say at this stage).

  You need to discuss with your email provider (one that provides you with e-mail service - perhaps your ISP, but maybe someone else entirely).  They are the ones who can access these things on your account and understand what is the problem (or help you to fix your computer's settings so that you get emails again).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why can I not get no response from the audio input jack? have you tried 4 different microphones in Final Cut Pro

  I have started working on FInal Cut Pro and have discovered that my audio Jack does not recognize any microphone that I plug.  I tried 4 different microphones up to now.   The input Attenuator is turned up 50% and beyond with no effect.   The entry just says "Audio" preferences pane: "Line input" with no other available device.  Am I missing something here?   He is 4 years old and this is the first time I tried audio input.

  The line-in input on a Mac requires an entry amplified, not a single entry.

  The headphone includes a contact mic. See:

  How to use the Apple earphones with remote and mic with your Mac - Apple Support

  You can also het USB mic input devices

• Re: printer not accepting do not print from the computer command

  I had a HP Envy 4500 printer for a couple of years and had no problems, but all of a sudden, it stopped printing from the computer (even if she printed offline).  I ordered a new HP

  Hi @janmoore

  Welcome to the Forums of HP's Support. I understand that you can not print. I would like to help.

  So that I can help you better, I have a few questions.

  What is the printer connected to the computer via a wireless network or via a USB cable?

  Did you run the HP print and Scan Doctor? (If not, give him a race)

  You receive a specific error message?

• When I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003

  How to fix error code 105-100003

  I am running windows7 on my host network and vista on the other computer. I am able to connect to the correct internet on vista computer, but when I try to print on a printer connected to my win7 I get code "printer not responding" 105-100003. I printed before and I have not changed or added to any software since. Both computers are desktop computers and connected by ethernet cable. I have run diagnostics and checked all cables. I have a modem 2 son I had about 2 months.

  Hi, Jimmy.

  Make the printer and model would be useful.  Thank you.

  Try the following:

  If your printer is connected via a wireless network:

  1. Make sure that your printer is turned on. (Start button / stop is turned on).
  2. Make sure that the blue LED of Wi - Fi on the front of the printer is on and stays on.
     • If the blue wireless LED flashes, your printer is not connected to your router.
     • 1. Follow the steps in the configuration of wireless network Guide (named the network installation Guide, if your printer has Ethernet printer capabilities) to connect your printer to your router.
       2. If you are unable to connect the printer to the router:
          1. Turn off the power to the router, and then turn on the router
          2. Follow the steps described in the [wireless] Network Installation Guide once again.
          3. If necessary, see what should I do if I can't configure my all-in-one printer (including the connection of wireless configuration)?
  3. When the blue LED on Wi - Fi from your printer stays on (not flashing):
     • If the error ' printer does not "occurred while you have been setting up the printer:
     • 1. Open Software Center.
       2. Select the tools of the printer, and then select Printer Setup Utility (under Tools).
       3. Follow the on-screen instructions to set up the printer.
       4. Try to use the printer again.
     • If the error occurred after you completed the roll-out of your printer from Home Center Software:
     • 1. Make sure that the print queue is online.
       2. From your computer, click Start > settings > printers and faxes (or start > printers and faxes).
       3. Click on your printer.
       4. In the printer menu, make sure that use printer offline is not checked.
          NOTE: These steps may vary depending on your operating system.
       5. Try to use the printer again.

  If the error persists:

  1. Remove the printer from your computer.
     1. Select start > settings > printers and faxes.
     2. Right click on your printer, then click on remove.
  2. If your computer is WINDOWS VISTA or WINDOWS 7 OS, turn user account control.
     1. Select start > Control Panel.
     2. Double-click user accounts.
     3. Click turn user account control on or turn it off.
     4. Select the check box use user account control.
     5. Click OK.
  3. Configure the printer again.
     1. Go to start > programs > Kodak > Kodak Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  4. Try to use the printer again.

  If the error persists:

  1. If you have updated to the Home Center Software v6.x or greater, disable the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select Disable.
     5. Click OK.
     6. Locate and right click on the network AiO Kodak Discovery Service, then select restart.
  2. If you configure your printer, run the KODAK printer setup utility.
     1. Select start > programs > Kodak > KODAK Printer Setup Utility.
     2. Follow the on-screen instructions to set up your printer.
  3. Select the Hello Service.
     1. Select start > run.
     2. Type services.msc in the box, and then click OK.
     3. Locate and right click on the Hello Service and select Properties.
     4. Since the "Startup type:" drop-down list, select automatic.
     5. Click OK.
  4. Try printing from the center of renovation again.

  If the error persists:

  1. Make sure that any firewall software blocking the required services and that it does not block the firewall of the router. See cannot use a wireless printer to computer on the same network with firewall security program.
  
  NOTE: If you use BitDefender Total Security 2010, the problem can be solved by turning on the game mode in the firewall. If it does not turn on the game mode, temporarily disable the firewall to enable wireless printing.
• Make sure your computer is not connected to a virtual private network (VPN) or wireless home another network of safe working when you use the printer on your network. See using printer with the virtual private network (VPN).
• Check that your printer is not connected to the network trouble with the same name (routers with the same default SSID in your area). It is common for users to keep the value by default, out-of-box, SSID as the manufacturer provides (for example the linksys). If your router still has the default SSID, change the SSID under a new name specific to your router.

NOTE: updated to the latest version of the firmware of the printer and the software when prompted will help you have the most reliable connection possible. Go to www.kodak.com/go/aiodownloads.

If the error persists, contact us.

http://support.en.kodak.com/app/answers/detail/A_ID/36674/selected/true

• I have a c4700 printer. It analyses, but it will not copy or print from the computer

  I have a C4700 printer.  Have no trouble scanning.  It will be not copy or print from the computer.  Please help me if you can.

  I have a C4700 printer.  Have no trouble scanning.  It will be not copy or print from the computer.  Please help me if you can.

  Hello

  You will have to contact HP support for this problem.

  Make sure you have the latest drivers and software installed.

  Printers and multifunction:

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-002&h_lang=en&h_cc=us&h_product=18972&h_page=hpcom&cc=us&lang=en&h_client=S-A-R163-1

  You can also ask this question on the HP Support forums.

  Printers and all-in-one - HP Support Forum's:
  http://h30434.www3.HP.com/PSG/?category.ID=inkjet

  Or, contact HP support.

  Call Support and Service the customer of HP Officejet Pro 8500 has e-All-in-One Printer - A910a:
  http://h10025.www1.HP.com/ewfrf/wc/contacthp?cc=us&DLC=en&lang=en&LC=en&product=4083969&x=5&y=14

  Concerning

• Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation. I had to plug it, but the printer does not respond now.

  Printer not responding not connections (wireless printer) is good and solid. I replaced my old router wirelessly with a router of valuation.  I had to plug it, but the printer does not respond now.

  Is what brand and model of printer?

  I do not work unless your new router has the same SSID and password wireless as the old. Consult your printer documentation to find out how to handle the situation. For example, some Lexmark wireless printers have a program called Configuration Utility Wireless in the Lexmark folder under all programs on the start menu that is used to set up the printer when changes are made to the wireless network.

• 6500 a more tactile display icons do not work. The commands only work from the computer.

  Only the icons of the left column has previously worked. Now, nothing does.

  I have re-installed the software downloaded several times. No effect.

  Hello

  These commands are not accessible from the computer, because they are related to the printers. Because the buttons are unresponsive, you can contact HP which will be able to help.

• laser jet pro M127fw MFP: printer will not print from the computer

  printer works fine until I printed out a spec sheet. 35 a customer through an attachment page.

  now, the does not print from the computer. Everything else works fine. (copy, scan, fax)

  Internet works.  Reset the factory setting on the printer. Everything seems fine on the computer, but when I hit print

  nothing happens.

  Hi @kartman,

  Welcome to the HP forums!

  I read your post on how you can not print with your printer HP Laserjet MFP M127fw, on Windows Vista pro. I'm happy to help you with this printing problem!

  How is the printer connected? Ethernet or USB?

  In the meantime, please try our HP print and Scan Doctorand let me know what happens!

  If this, or one of the posts on this thread, helped you to solve the problem, please click on accept as Solution on the message. To show you 'like', or that they are grateful for my post, please click the thumbs upwards below. If there is anything else I can do to help, please don't forget to let me know!

  Hope to hear from you soon and thank you for posting!

• To print from the computer, but can not scan from printer to computer. Tried everything. Disconnected power supply, etc, nothing works.

  Have no problem when you print a document from the computer. Can not scan from printer to computer. I don't know that I've scanned because I went from windows 7 to 10. Printer not repeat myself found computer.

  Hi, Rolland,.

  Welcome to the Microsoft community. I might help you.

  To better understand the issue, I would need more information on your side.

  1. What is the brand and model of the scanner?

  2. Do you get any error messages? If Yes, what is the full error message?

  This problem might have occurred because of these reasons:

  1. Corrupted driver.

  2. Hardware problem.

  Method 1:
  I suggest you to run hardware store and check if it helps.

  (a) press the Windows keyboard.

  (b) Troubleshooting type in the search box and press enter.
  (c) click on material and audio.

  (d) click on hardware and devices and follow the on-screen instructions.

  Method 2:
  If the problem persists, I suggest you to download and install the latest scanner driver\software on the manufacturer's Web site.

  Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you more.

• print jobs in the queue from the computer to the top, but do not print

  1400 series all-in-one print jobs in the queue from the computer to the top, but do not print. Scan and copy functions are fine. What is the problem?

  chrismcgo wrote:

  I've upgraded to a new computer with windows 7 a month ago. The printer worked fine until last week. I tried the remedy proposed to other Hp users, but the computer will not accept the software provided with the printer, so the printer is always offline. Any other suggestions?

  I suggest the following: disconnect the cable USB, then download the full driver recommended from HP here.  Once the download is complete, run the Setup program.  Do not connect the USB cable until the installation program invites you to do.

• Why can I not select an object from its Center?  Direct Selecttool will choose only encompassing.

  Why can I not select an object from its Center?  Direct Selecttool will choose only encompassing.

  You may have turned on "Selection of object by the path only" in 'selection Options.