Why my user always get a BSOD?

Similar Questions

• Why do not always get my messages on my iwatch

  Why do I get not always my text messages on my I watch?

  Hello

  If you are referring to text message notifications, their behavior depends on the parameters and the status of your devices. With wrist detection enabled, in order to get notifications to your attention as soon as possible:

  -If your iPhone is unlocked, you will receive notifications on your iPhone instead of on your watch.

  -If your iPhone is locked or mode and your watch is unlocked (regardless of the question of whether the screen saver is awake or asleep) and on your wrist, you will receive notifications on your watch.

  -If your watch is locked or allowed to do not disturb, notifications will be sent to your iPhone.

  More information:

  About notifications on your Apple Watch - Apple Support

• Why am I always get error unspecified of C\Program Files(x86) \New folder \Engine\5.2.0.13\uistb.exe everytime I try syart upward from my Norton 360 anti virus

  whenever I try to use my Norton, 360, it does not work, I can't urn that the firewall on it isn't work fpr the reason why I said in my question. How can I solve this problem of an unspecified erro amd to get my Norton 360 tp work?

  Contact the Norton Support for assistance.

• Why do I always get "Sorry" when click on 'Join Now' in Free Lotto?

  Why don't I always sorry, when I "click to Join now" try now, or confirmed.

  Jangrim Poulsen

  Selatrað, Faroe Islands

  Hello

  1. what web browser do you use?

  2. are you the game online or try to install the game?

  3. What is the exact error message you received?

  If you use Internet explorer, I suggest you to see link and check.

  The problems of games online using Internet Explorer

  http://support.Microsoft.com/kb/2528246

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

• internet access - I always get 'pending on the cache' when you try to access the Internet

  Why do I always get 'pending on the cache' when you try to access the internet

  Hi reneamayo,

  1 Windows operating system you are using?

  2. what browser do you use?

  3. If you are using Internet explorer, what version of IE are you using?

  4. When did you start to question?

  If you use IE, then you can try to run the Fixit mentioned in the link below and check:

  Improve performance and security in Internet Explorer

  http://support.Microsoft.com/mats/ie_performance_and_safety/

  You can also check out the following link and try the steps:

  How to remove the contents of the temporary Internet files folder

  http://support.Microsoft.com/kb/260897

  Hope this information is useful.

• When you receive a text, I always get an alert tone. However, I don't get an alert of a particular iPhone user tone. This user received a warning sound when I have them send a text. Is this a phone w / my problem or the user? Is there a solution?

  When you receive a text, I always get an alert tone. However, I don't get an alert of a particular iPhone user tone. This user received a warning sound when I have them send a text. Is this a phone w / my problem or the user? Is there a solution?

  Hi royster677,

  Thank you for using communities Support from Apple! I'm sorry to hear that you are having these problems with your iPhone. If you are having problems with the tone of the text for a specific user, you can check the parameters of Contact of the user (under the Edit button) as shown in the following page of the User Guide:

  Contacts at a glance - iPhone

  If everything looks correct, and you still have questions, you can also check your settings stuck and do not disturb:

  Block calls and messages to block or filter on your iPhone, iPad or iPod touch - Apple Support

  Use of do not disturb on your iPhone, iPad or iPod touch - Apple Support

  Concerning

• Why do I get the BSOD?

  In recent days, I've known BSOD 7 or 8 per day. This includes "MEMORY_MANAGEMENT", "SYSTEM_SERVICE_EXCEPTION", and sometimes it does not give a reason, just a list of suggestions. I tried it without success. I ran the Diagnostic tool and it told me nothing. I don't know where are the minidump files, but if someone can tell me, I'll try and bring it to the top. In the meantime, I need help. It is impossible to get anything done.

  Hi Zack,

  Thanks for posting your question in the Microsoft Community forum. I understand that you get the BSOD error under windows 7.  I would like to help solve you the problem.

  Before troubleshooting, provide us with information.

  1. What is the brand and model of the computer?

  2. what security software is installed?

  3. don't you make changes to the computer before the show?

  This problem may occur if one or more of the modules Random Access Memory (RAM) that is installed in your computer are damaged or if the RAM configuration is incompatible. It can also be any device, its pilot or related software.

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.  If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files: http://social.technet.microsoft.com/Forums/en-US/w7itproui/thread/4fc10639-02db-4665-993a-08d865088d65

  Additional information.

  I suggest you to refer to this article to check if this help.

  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Important: while performing the check disk on the hard disk, if bad sectors can be found, then check disk will try to repair this sector. All the data available in this area may be lost.

  Custom installation WARNING: If you format the hard disk during the installation, the data files are saved in a Windows.old folder on the partition you installed Windows 7.  However, you should always back up the files. If you have encrypted data files, you may not be able to access them after installing Windows 7. If you have backed up your data files and then restored after Windows 7 is installed, you can delete the Windows.old folder.

  If you need help on this particular issue or any other related Windows issue, let know us and we will be happy to help you.

• why I always get the message that I have a free membership, when I have a subscription?

  
  

  I would like to know why I always get the message that I have a free membership, and I need to improve my creative to a full, membership cloud membership even if I continued my membership in January

  Please see the suggestions here and see if they help you:

  FAQ: What should I do if I have a subscription, but my application acts as if I had a trial?

  If if still appears under the name of first instance, after trying these suggestions, please contact our staff of support directly by following this link: contact Adobe customer service.

  For more information, please visit: FAQ: how to contact Adobe for support?

• I bought Adobe first Pro CC but I always get buy now

  I bought Adobe first Pro CC but I always get buy now. Why does. What should I do?

  Hi Julie,.

  If disconnection does not help, follow these steps:

  Sign out of the creative cloud app and exit (Quit option will be available after a few seconds).

  Move the following folders on the desktop:

  (1) SLCache

  Windows: OS Lecteur\Program Files (x 86) \Common Files\Adobe

  Mac: Adobe/Library/Application Support/Adobe

  
  

  (2) SLStore

  Windows: OS drive\ProgramData\Adobe

  Mac: Adobe/Library/Application Support/Adobe

  
  

  (3) OOBE

  Windows: OS Drive\\AppData\Local\Adobe Users\ directory

  Mac: /users / / Library/Application Support/Adobe

  
  

  Now connect to the creative cloud app and see if it works.

  NOTE: Make sure that your Anti Virus/Firewall is blocking all the Adobe activation servers. Alternatively, you can also check your file "hosts" for any changes.

  Thank you

  Regalo

• Why can I never get a good picture on my imac when using Skype?

  Why can I never get a good picture on my imac when using Skype?

  I use the free Skype to talk to my friend in China every week. They always see me on their computer or phone clearly, but I can never get a good video of them, clues why? I see a good image of myself, but never of them. I can't adjust the settings of the built-in camera because they are fixed. Is this my router modem, which is 8 years old now. What is causing this problem. If you look on YouTube there are hundreds and thousands of good quality webcam videos then why am I having this eternal problem year after year? I've got El Capitan OSX

  If they can see you clearly, the problem is not on your side - at least not in your Mac. Could be the router or you internet connection. Otherwise: https://support.skype.com/en/skype/mac/

• I downloaded and installed the new version of Firefox, but I always get the message that my browser is out of date when I check my plug-ins on your Web site. Help, please!

  I got the message to update my browser, I went on the site and download the latest version of Firefox. I update my plug-ins as well. However, I always get the message that my browser is obsolete. I uninstalled it, reinstalled, without success. Please help me. When I go to help and select about Firefox, I have that I use the latest version: 6.0.2.

  See https://support.mozilla.com/en-US/kb/new?title=Web+sites+or+add-ons+incorrectly+report+incompatible+browser

  Check general.useragent preferences on the topic: config page.
  
  You can open the topic: config page through the address bar just like you open a Web site.

  Filter: general.useragent

  If all general.useragent prefs are "BOLD" (user set) then right-click this pref and select reset.

  It would be probably due the FBSMTWB on the end of your useragent that you had added the Fast Browser Search toolbar extension.

• I have a computer Dell who get a BSOD every time I start.

  I'd appreciate any help. I can't get the BSOD. I don't know what todo.

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually: http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  [Now you know why your brother gave you the ugly computer!]

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Always get errors trying to control power 7651 YOKOGAWA on Labwindows/CVI

  Hello

  I'm trying to set the voltage on YOKOGAWA 7651 feeding through labwindows/cvi. I've set up a digital slide on my UI with callback function "yoko7651dcvolts" and the name of the constant "YOKO7651DCVOLTS".

  I always get this error when I run my program:

  "FATAL RUN-TIME ERROR: "DcSource.c", line 53, col 65, thread id 0x00001F3C:   Invalid argument type: found 'pointer to double', expected 'pointer to int'."
  

  This error indicates the third argument to the GetCtrlVal function below. The lack of program/compiler pass the variable "yoko1volts" as a whole, but I want to (and should) be able to settle the tensions as floating numbers.

  Of more, even when I said "yoko1volts" as a whole, it stills does not work. All I get is zero, zero and zero... on the power meter whenever I press the digital slide.

  This is the section of the C code which is problemic:

  int CVICALLBACK yoko7651dcvolts (int panel, int control, int event,        void *callbackData, int eventData1, int eventData2){    double yoko1volts;    switch (event)    {        case EVENT_COMMIT:        GetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651DCVOLTS, &yoko1volts); // to read the values entered on the numerical meter on the user interface
  
          yk7651_set_volts (yoko76511Panel, yoko1volts); // set the entered values as voltage on the instrument
  
          break;    }    return 0;}
  

  It's the h-file related:

  #define  YOKO7651_1                       4#define  YOKO7651_1_YOKO7651SWITCH        2       /* control type: binary, callback function: yoko7651switch */#define  YOKO7651_1_YOKO7651DCVOLTS       3       /* control type: scale, callback function: yoko7651dcvolts */
  
  
  

  Please help, how can I solve this problem?

  All pilots (including feeding YOKOGAWA 7651) are correctly installed and mounted. In fact, I can successfully turn the power supply on and off with the code below:

  int CVICALLBACK yoko7651switch (int panel, int control, int event,        void *callbackData, int eventData1, int eventData2){    int yoko7651switchstate;    switch (event)    {        case EVENT_COMMIT:        GetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651SWITCH, &yoko7651switchstate);        SetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651SWITCH, !yoko7651switchstate);        yk7651_output (yoko76511Panel, !yoko7651switchstate);            break;    }    return 0;}
  
  
  

  It is just setting the voltage on the power supply which is very problematic. Any help is appreciated... Thank you.

  I second opinion Al of a disconnection between the UIR and the variable that contains the handle to the Panel.

  As a side note, I noticed that the problematic line reads the value of the controll which callback is executed:

  #define  YOKO7651_1_YOKO7651DCVOLTS       3       /* control type: scale, callback function: yoko7651dcvolts */
  
  int CVICALLBACK yoko7651dcvolts (int panel, int control, int event,        void *callbackData, int eventData1, int eventData2){    double yoko1volts;    switch (event)    {        case EVENT_COMMIT:        GetCtrlVal (yoko76511Panel, YOKO7651_1_YOKO7651DCVOLTS, &yoko1volts); // to read the values entered on the numerical meter on the user interface
  
          yk7651_set_volts (yoko76511Panel, yoko1volts); // set the entered values as voltage on the instrument
  
          break;    }    return 0;}
  
  

  In a situation like this, I will try using GetCtrlVal (Panel, control, & yoko1volts); Instead, which should get rid of all the problems in the control panel manage / control ID.

  Despite this solution works, anyway I'd be deep into the problem like a bad Panel can lead to erratical behaviors in other parts of the program.

• When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up

  When you try to start the programs of their shortcuts, I always get a window MS-DOS pop up.  The header says 16-bit subsystem MS_DOS.  For example, when you try to start Microsoft Word, the message says:

  C:\Documents and Settings\All Users\Menu demarrer\programmes\microsoft Office\Microsoft Office Word 2003.lnk program invalid file name, please check your pif file.

  I can start the program by clicking on any document in my documents file, however.  I know that something is messed up in the registry (we had a bad worm (MS Removal Tool).  However, I can't a registry cleaner to open.  I used a WinXP_EXE_Fix.reg to try to fix the missing exe file.  He has set a number of things, but still will not let me run a registry clean.

  Any help?

  Hello

  Try the following steps:

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Windows Live Hotmail was not able to complete this application. Why do I constantly get this message in my e mail.

  Why I always get this message: Windows Live Hotmail was not able to complete this application.  Microsoft may contact you about this problem.

  I get this everytime I want to write an e-mail.  What is the problem and why I am getting the same message.  Thank you.

  Hello

  You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.