Why not lemutri scopes show levels greater than 100 or less than 0?

Similar Questions

• Why not Time Capsule shows under "other devices" in the Finder?

  Why not Time Capsule shows under "other devices" in the Finder on my MAC?

  "Devices" are connected directly to a Mac and would include things like USB hard drive, FireWire drive and Thunderbolt drive, etc.

  The Capsule is a "network" connected to a network drive... If the operating system on your Mac behave, Time Capsule will appear in the Shared section.

  If you have added a NAS (Network Attached Storage) disk, this product would also appear in the Shared section.

  A wireless printer can also appear under shared.

• Why not Firefox 23 show the bar menu, bookmarks bar or dock despite uninstall/reinstall, reboots, etc., well than Safari works well?

  FF worked fine until today, when all of a sudden it stopped display of the menu bar, bookmarks, navigation and even my dock! All I get is a display full page of Google. It happened when I went to the top to check the history - got the beachball, typical of FF and the history, I found. So I had to leave FF and open it again, and the page is screwed in place, that's what I got. FF gave me a lot of problems over the years, but it's brand new. I work on my Macbook Air friend, do not know what version of FF she had, but I uninstalled (by trashing it), restarted and downloaded the latest FF. same problem. I did a disk utility repair permissions, no effect. I'll have to do to Safari because there is literally zero controls in FF - not even a place for a URL. I don't know when FF 23 came out, so I don't know if that's what she already had. Of course, troubleshooting information is not available, nor 'assumptions about your browser and operating system' works. It's OS X 10.6.8.

  Make sure that you run not Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

• Sound Volume settings do not go below 20% or greater than 70% HELP!

  After restoring my computer using Norton Ghost because of this problem, it happened again after several days and I have no idea why, or how to solve this problem.

  The green light on volume will be not less than 20% and not more than 70% using different volume controls.  This is verified by going to the control panel and looking at the settings of the sound card and all mixer controls accessed through entertainment console commands.

  All of them, no matter how I try to adjust my volume, can't go to zero, full 100%.

  I'm pretty sure that I did not visit all websites would have done anything to my system, although it is not always guaranteed.  I also run Avast Antivirus and Malwarebyte Anti-malware constantly.

  This issue first appeared a few weeks ago, during which, after struggling to set things straight I restored my system and yet tonight no reason apparent.

  When I try to move the cursor under a minimum of 20% is refuse and bounces.  And even more than high 70%.  It's as if some type of compression thing happening automatically as I do not turn.  Not that I know of.

  Everyone heard about this problem before?  How to fix?

  I thought I had discovered a solution.  Don't know how or why it worked, or what has caused this setting initially, but here's what I discovered:

  I went to Windows Media Player after having reviewed the Options tool, judged on the tab DEVICES, speakers highlighted and clicked on PROPERTIES, as the device to use default Directsound device.  I changed it to the map of his Creative Audigy, I have in my office and that seemed to do the trick.

  Yet once, don't know how this has changed or if it has never changed a bad choice, but by changing it ((retour) return) for my Creative Labs Audigy card, fixed levels of sound volume to 0 and 100%.

  = = = = = = = = =

  This post is almost a month after the one above.  This solution (changing the speaker inside Windows Media Player properties) does not work for me.  The problem I wrote originally, returned again tonight, and the difficulty that I thought I had discovered does NOT work.

  Everyone, if you know why the Green level bar can get stuck at 20% to 70% please advise!

  I don't know how to solve this problem.

• Why not a game show upward into the Games folder more?

  On the first computer, I installed Windows 7 on (there are two facilities), The Elder Scrolls IV: Oblivion appeared in the games on its own folder.  After the death of the mother of the computer, I installed Windows 7 32 - bit on a new computer, andoversight were not included in the games. I had to add manually, and it would download album cover nor does not endorse the links.  I am now on a third computer, Windows 7 64-bit and oblivion did not appear in the Games folder (although his predecessor,Morrowind, a).

  Y at - there a rhyme or reason to this, and then I manually fix the problem?

  EDIT: actually, I have a similar question on another game. The game itself did not appear, but the expansion pack has.

  Hello

  Most of the new games generally automatically appear in the Games Explorer folder when you install on Windows 7. However, some previous games may not appear
  in the Games folder, and in this case, you will need to manually add the shortcut of the game in the Games folder.

  Additional information:
  http://Windows.Microsoft.com/en-us/Windows7/working-with-the-Games-folder

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• I've recently updated the browser and it shows the great fountain and page do not know why?

  I have download and update my Firefox browser on both computers (22.0). It has change my length and the width of the page, also the police, I tried to change the size and the view option, but it didn't for me. Does anyone have any tips for me to return to my default configuration?

  Hello

  Firefox on Windows is now after display, scaling options that can make the biggest text on screens at high resolution. There are several ways to solve this problem. See the Web pages are broad and fuzzy after update of Firefox - how to fix article for a suggestion. Here is another possible solution:

  • Type of topic: config in the Firefox address bar and hit the Enter key.
  • If the warning that this might void your warranty , click I'll be careful, I promised.
  • Search for layout.css.devPixelsPerPx

  

  • Double-click layout.css.devPixelsPerPx to edit its value. The default value is - 1.0 in Firefox 22 and above. Change it to 1.0 to run as in previous versions of Firefox.

  If necessary, further adjust the value of 0.1 or 0.05. Values between 1.0 and around 0.5 to reduce the size of the elements. Use a value greater than 1.0 to increase the size. For example, a value of 1.25 will increase the font size of the 125% to account for the default DPI setting in Windows 8. Check the value that you enter. Definition of a value that is too small will take everything away and too high will explode things.

  If the web pages should always be adjusted so you can watch the extension Default FullZoom Level or NoSquint .

  To adjust the font size for the user interface, you can use the extension of theme font & size changer .

  This solve your problems? Please report to us!

  Thank you.

• Outlook 2007 backup file is greater than the source file. Why?

  My Outlook pst data source personal folders file using 2.4 GB.  The backup file (by using the backup tool) uses 5.4 GB.  Why the difference?  I back up all my data on a hard drive to FAT 32 format, which will not accept a file greater than 4 GB, so I'm not able to save Outlook backup file given its current size.

  Hello GaryCalgary,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Outlook and would be better suited to the community of Office Discussion groups. Please visit the link below to find a community that will provide the support you want.
  Outlook General Questions Discussion Group

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Export from InDesign to PDF and the PDF file last updated is greater than one month and not easily print on letter paper is PDF presets?

  Hello

  I export from InDesign to PDF page is larger in the PDF file, and others I exported. This is because of the present PDF? One of the project managers is not able to print on 8.5 "x 11", but the InDesign document presets are the same as before. I wish I could download PDFs to show, but the newly exported PDF is greater than the version I created a month ago. I created a PDF file and the newly updated PDF file is almost un.5 inch wider with the export presets even. Any thoughts?

  

  

  Sadira00123456789 wrote:

  One of the project managers is not able to print on 8.5 "x 11", but the InDesign document presets are the same as before.

  I suspect the project manager has his copy of Reader/Acrobat simply set to print full size, rather than "Worthy" (assuming that the size of InDesign pages is truly 8.5 x 11).

  .. the newly updated PDF file is almost un.5 inch wider with the same export presets.

  This has nothing to do with export presets. How did determine you this difference of half inch?

• Why my "speaker" icon shows that the audio is not working?

  Why my "speaker" icon shows that the audio is not working?

  Hello

  Thanks for posting this question in the Microsoft Community. It seems that the audio does not work.

  Answering these questions that would help us provide a better solution:

  1. What is the full error message you get?

  2 have you tried to install the drivers for the sound card?

  3. What is the brand and model of the computer?

  Method 1:

  Try the methods mentioned in this link and check:

  This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones. This tutorial does not cover sound problems related to specific programs. Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  No sound in Windows
  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

   

   

  Also check out this link as a reference are discussed common issues with sound:

   

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

   

  Method 2:

   

  Check if the Audio services and dependency are started. To do;

   

  a. Windows Audio

   

  b. Windows Audio Endpoint Builder

   

  And its dependencies are

   

  c. multimedia class Scheduler

   

  d. remote procedure call

   

  e. generator Windows Audio endpoint

   

  a. click Start, type services.msc in the search box.

  b. search for the services mentioned above and check if the services are started and the Startup type is set to Automatic.

  c. If not, right-click on the service and click Start.

   

   

  Hope this information helps. If you have any additional questions with Windows do not hesitate to answer and we will be happy to help.

• Why not is not updated working level of windows 7 Starter to home premium. I PAID for the product.

  Why not is not updated working level of windows 7 Starter to home premium. I PAID for the product. Do the thing anytime upgrade and after a wait I am informed upgrade failed, what should I do?

  Windows 7 Anytime Upgrade fails:

  If your getting the following: error: Windows Anytime Upgrade failed
  This problem may occur if Windows 7 SP1 was downloaded by Windows Update, but has not yet been installed.
  See: http://support.microsoft.com/kb/2660811

  = Other reasons and possible corrections.

  Windows Anytime Upgrade fails with the error:
  "every time that the upgrade has failed. Go online to solve the problem.
  http://support.Microsoft.com/kb/2658652

  If Anytime Upgrade still does not work:

  Shut down and restart your computer.

  Make sure that the Windows updates have been installed.

  Download the hotfix that contains a tool called CheckSUR, this tool will look at the package and the maintenance of records and difficulty any data corrupted, the tool is listed under kb947821 he can be found at the following link http://support.microsoft.com/?kbid=947821

  If Anytime Upgrade still does not work, turn off the user account control:

  1. go in user accounts in Control Panel

  2 change user account control settings

  3. pull the slider to the level as low as possible

  4. restart the PC

  5. pass by the "Anytime Upgrade" as usual

  Try the following:

  1 disable any security software before attempting to upgrade

  2. make sure that your computer is updated (devices and applications)

  3. disconnect all external devices before installing.

  4. check your hard disk for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  1. click on start, type msconfig in the search box and press ENTER.

  User account control permission

  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  2. in the general tab, click Selective startup.

  3. under Selective startup, clear the check box load startup items.

  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  5. click on OK.

  6. When you are prompted, click on restart.

  7. after the computer starts, check if the problem is resolved.

  Also run the Windows 7 Upgrade Advisor:

  http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  Who should I contact if I have problems installing and / or activation of my product key card?

  Please contact to the: www.windows7.com/getkeysupport.

  If all above fails them, install Windows 7 Service Pack 1, and then try the Express Upgrade:

  Learn how to install Windows 7 Service Pack 1 (SP1)
  http://Windows.Microsoft.com/en-us/Windows7/learn-how-to-install-Windows-7-Service-Pack-1-SP1

  If your key is not valid and you will need to change the keys, you may need to Open regedit and remove first the ProductKey value in the following registry key:
   
  HKCU\Software\Microsoft\Windows\CurrentVersion\WindowsAnytimeUpgrade

• Why not show updates of the mail app on the lock screen?

  Why not show updates of the mail app on the lock screen?

  Make sure that you have added to the e-mail application:

  1. go in the PC settings.

  2. choose Customize.

  3. choose screen lock > lock screen apps.

  4 search the email and add it.

• 2015 CC Dreamweaver shows why not the border of the table. In the prevoios version Dreamweaver CS6 see the border of the table.

  2015 CC Dreamweaver shows why not the border of the table. In the previous version of Dreamweaver CC see the border of the table.

  See the difference

  Dreamweaver CC 2015

  

  Dreamweaver CS6

  

  The first image shows 'Live' display, as the second watch design mode. That's what I think "Design" shows in the latest version of DW.

  

• Why not show the photos imported into Lightroom?

  I imported a file of about 170 photos in lightroom using the same process I used for a month.  the files are a combination of canon .cr2 files and corresponding .jpg files that go with the .cr2s.

  After the import is complete lightroom showed zero pictures in this folder.  I immediately took panic and double checked that all files really did not exist in the folder via windows Explorer.

  However, if I go back and try to re-importation of the import function files shows all files as having been previously imported.

  I tried the process "synchronize the folder" and it shows first as '170' files to import, but after the full synchronization function it shows 0 files processed.

  Any ideas why lightroom refuses to show this particular group of files?

  I suspect it's something either really easy or the library on my system is messed up because of corruption.

  If the library is messed up how can I do to rebuild.  These photos are critical for me because they are shooting at the head of an actress.

  Here is my proposal... you imported photos with the copy option, and if your Windows Explorer thinks that they are in the Outbox folder (so you think), and Lightroom they think in case Z, where the photos have been copied.

  So... in Lightroom, if you si vous pouvez pouvez go to catalog the left panel, click on all photos, find one of these photos of 170 critical and do a right click on it then go to the folder in the library. This will tell you where Lightroom think that pictures are found. From there, you can work with photos, or update their folder location A (where you think they should be). If it works and that's what you want, writing back and we will advice you and others.

• Why not default shortcut keyboard to show/hide baseline grid (opt + command +') does not work?

  Why not default shortcut keyboard to show/hide baseline grid (opt + command +') does not work?

  Thank you! Who took care of her!

• Why is it not my slide show Photoshop Elements 10?

  I use a MacBook Pro with OSX 10.8.2 operating system with 8 GB of memory.  The version of 10 items is Version 10.0 (20110831.m.17215). Here is the screenshot of the Organizer.  As you can see that I don't have a slide show option in this menu.  Why not and how can I get one to appear in this list?

  Arnold

  

  There is no slide show in the mac, only Windows version. You have iphoto, imovie and iDVD, which can make slideshows eventually.