Why tcp closed peer trying to read the msg after successful listening?

Similar Questions

• Satellite P300 - 19 p: CD/DVD drive is trying to read the disk then ejects

  Hello

  I hope someone can help,

  I have a * Satellite P300 - 19 P *.
  I've had this laptop for 3 months and it's the last frustrating problem; occasionally when I insert a DVD or CD and close the CD tray tries to read the disc and then ejects the disc, even if I remove the drive and close the drive drawer pops out again,

  If I shut down the system and restart the problem still exists.
  I checked the drivers that are updated and the operating system is Windows Vista Home premium 32-bit.

  It is the fourth time this happens and the problem seems to fix it of self and reappears as and when!

  If anyone has had this problem or can anyone help because it makes me crazy.

  Hello!

  I think that s a problem with the CD/DVD drive.

  In your case, I would go to an ASP (authorized service provider). They should check your laptop and change the drive if necessary.
  Here, you can search an ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an ASP.

  Good bye

• Event Viewer error "there was an error while trying to read the local hosts file." file "hosts" but good

  Hello

  In Event Viewer, I see a lot of mistakes like:

  Source: The customers DNS events

  There was an error trying to read the local hosts file.

  I read that threat indicating to rename the hosts for "hosts" file

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/system-log-shows-repeating-error-code-3221225485/3700e855-ded4-4F12-960f-1577f6132c04

  HOWEVER, the name of the file in my computer appears as it should

  C:/Windows/System32/drivers/etc / "hosts".

  and the content of the file is as it is supposed to be according to: http://support.microsoft.com/kb/972034

  What should I do to fix this error?

  P.S. I suspect my computer is compromised. Last weekend, Security Essentials has reported a malicious file backdoor and it has been deleted, but I have a weird behavior of the computer

  Thank you

  Veronica

  Try to re-create the hosts file.

  Open Notepad as administrator (click right on the Notepad icon or shortcut and click Run as admin) and type the following information in it:

  127.0.0.1 localhost

  : 1 localhost

  The '1' in the '127.0.0.1' must be in the first column of the line and there must be at least one space between "127.0.0.1" and "localhost". In the second line, there must be at least one space between ": 1" and "localhost".

  Save the file with name "hosts" in the C:\windows\system32\drivers\etc folder.

  Source: http://www.sevenforums.com/system-security/130518-hosts-file-missing-should-i-worry.html

  You seem to have a hard drive problem. Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

• BlackBerry smartphones "an error occurred trying to read the media.» (Videos/YouTube) (WiFi)

  Hello

  I have a Storm 2, YouTube and videos work fine and dandy, and then yesterday suddenly YouTube stopped working. I would like to click on a video, he strives to buffer for 30 seconds, then said "an error occurred trying to read the media.» I tried to do the thing optimization YouTube, check again. I thought that maybe it wasn't the internet bad connection, since we were our friends, but he came home today, same thing happens.

  Also today I tried to record a video, and when I finished recording and tried to play, same error. I have connected my BB to my PC and played, played very well. The video is in 3GP format.

  The storm 2 is from Verizon, but it is unlocked and I am with Bell. I have not given or the internet with bell is throughout the WiFi.

  Halp meh please.

  Still, first, reboot the device...

  With the BlackBerry powereddevice, remove the battery for a minute and then reinsert the battery to restart. A reboot in this way is prescirbed for most the gltiches and operating system errors, and you will lose any data on the device doing so.

  Now, try again your video playback.

• Why am I trial trying to open the software I have purchased (lightroom5)?

  Why am I trial trying to open the software I have purchased (lightroom5)?

  Thank you for the Reginab8929 update.  For this, looks like that this behavior is due to the upgrade of Windows 10 experience.  The steps Brucgov offered was an attempt to clean up the licence that has been damaged by the upgrade data.

  I would recommend going through the steps listed in the use of the Adobe Creative Cloud cleaning tool to solve installation problems again.  In particular, it is important to complete step 2 before you run the CC cleaning tool. You will want to remove all installed Adobe software titles.

  If you need a new copy for Lightroom 5.7.1 installation files are available to Adobe - Lightroom: for Windows...  Please feel free to update this discussion if you have any questions about using the uninstaller or CC cleaning tool.

• A network error occurred trying to read the file c: WINDOWS\Installer\iTunes.msi

  I'm not able to go to iTunes or watch videos on my program Corel due to an error in Quick Time. It keeps telling me that I need to improve my Quick time and when I tried it wouldn't let me so I tried to remove it and couldn't because of an error and then I came here to get the Windows Cleanup utility and who eventually removed the program out of my control panel and I thought that would fix it but it didn't and now it gives me this message. What should I do now?

  Ok!
  This problem occurs in all applications in all environments such as Windows XP, Amiga and Windows 7. I have only my current computer with Windows 7 64 bit related to the problem. After following suggestions to cure the problem without success, I read the error message that displayed the MSI being read in C:\Windows\Installer. There is no such MSI placed in this directory. SO to solve the problem, you must put some Apple msi installation which gives the error message in the C:\Windows\Installer directory. Just drag it directly into the directory. Do not use any subdirectory. If your don't have a copy of the MSI, you can extract it from the EXE installer with a program like WinRar. My problem was with iTunes to bleed the system looked like this C:\Windows\Installer\iTunes64.msi. Run the MSI file or the original from Apple download. It worked for me as expected if you give it a try.

• Hard drive erased, now receive the error occurred trying to read the boot configuration

  I erased my hard drive but when I restarted my computer, it said that there is an error then produced than that to read the boot configuration, I tried to use the windows vista download recovery disc but when I turned on my computer nothing the same thing appeard. HELP PLEASE!

  * original title - I erased my hard drive but when I restarted my computer, it said that there is an error then produced than that to read start configuration.*

  Here's how to use the Vista startup repair disk. is NOT a Vista reinstall disk.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to reinstall Vista:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Error message "network error occurred trying to read the file" xnafx30_redist.msi

  I was download microsoft touch pack for windows 7 when I received the following message: "network error has occurred trying to read from the file c:/programdata\applicationcache\xnafx_30redist.msi" and the download stopped.  I have a hp touchsmart computer, running windows 7, sp1.  is there a conflict?  What can suggest you or will they still co-exist?  Thanks for any help for the beginner!

  Hello

  1. don't you make changes to the computer before the show?
  2. which web browser is installed on the computer?

  Method 1
  I would say you can do clean start and then try to install XNA Framework. When you perform the clean boot, make sure that you disable all antivirus programs.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: Microsoft does not recommend that you disable the antivirus protection in most conditions. Disable the antivirus protection that temporarily to restore a computer.
  Note: Follow step 7 clean boot KB929135 article to reset the computer in normal mode.

  Method 2
  I suggest you to uninstall XNA Framework completely, and then download and install XNA framework from the following link. Once you install XNA Framework then Touchpack.
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20914

• Why I get this trying to empty the Trash: the operation cannot be completed because the item "IMG_0645.jpg" is in use

  After selecting and dragging some photos of Photo on the desk I have their attached to an e-mail and sent them to the coast. Then I selected the 5 photos on the desktop and put them in the trash. When I tried to empty the trash later I received the following message: the operation cannot be completed because the item "IMG_0645.jpg" is in use.

  Aren't these photos on the desktop 'copies' of the originals in the Photo?

  All wise users out there with an answer?

  stop, disconnect all external devices

  Restart your computer in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  empty the trash after checking the files in there are of no use to you

  arrested again

  Reconnect the external devices

  reset.

• Error 1316: a network error has occurred trying to read the C:/windows/installer/Setup.msi__trying file for uninstall Manager communication at & t

  uninstallation of at & t communication manager

  https://www.wireless.att.com/support_static_files/KB/KB79807.html

  http://www.wireless.att.com/answer-Center/solutionDisplay.jsp?SolutionID=KB79807

  Read the above.

  See you soon.

  Mick Murphy - Microsoft partner

• Error "this file has no program associated with it for performing this action. Create an association in the control panel of the associations' when trying to read the video files on the CD

  Original title: file does not have a program associated with it for performing this action.

  I make a business card CD on Auto Play Studio 8. I have completed the project and burned the cd to test on different computers. When I clicked on the 'Video game' button, I get this warning. "This file has no program associated with it for performing this action. Create an association in the control panel of the associations' Ok I made the proper action to take, and I still get the same problem. I did this on a XP pro, Vista and 7 PC.

  
  Hi NoPCgeek,
   
  1. what program do you use to read the file present on the CD?
  2. What is the format of the file present on the CD?
   
  Before playing the files on the CD, make sure you cross check if you have the right program installed on the computer. If you have not installed the right program, then we recommend you to install the program that supports the file type and use them to read the files on the CD.
   
  You can also change the default program to read this file. The program opens the file only if the file format is supported by the latter.
  See Change that uses default Windows programs
   
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem reading the worksheet after you use a DLL to write on the worksheet

  Hello

  I have a few problems reading a sheet DLL created in LabVIEW. The DLL is written in C++.

  I'll dexcribe what do the VI in the screenshots:

  For DLL_INIT = the first false steps the VI (LabVIEW) values and exports in a DLL initialization.
  DLL takes these values and not some und calculation, then wrote the measured values and the new calculated values in a csv file called 'filtered_values' and a file 'filtered_values_complete '.
  so, I have two files like this after initialization:

  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;

  So now on DLL_INIT = true.
  For the calculation, the next step i read the "filtered_values" - file (LabVIEW), calculate the new values and write in filtered_values (DLL)
  And in the "filtered_values_complete" - file I will allways read the DLL entry first, so that I can check later, if the DLL has obtained the values to the right of the front step and then add the calculated values.

  For i > 0 initialization has been made:
  -the VI bed sheet "filtered_values" calculation and rotted the table 1 d in its unique values
  -The last seven values in the worksheet have been exported in the dll as well as five new measured values.
  -This DLL is still a few calculation
  - then it replaces the "filtered_values" - file and adds a new line to the 'filtered_values_complete '.

  This migth be a bit of confusion, so a small example, afer five steps it loooks like this:

  filtered_values:
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  filtered_values_complete:
  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
   
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
   
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
   
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;

  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  So it's good enough that the VI and it works fine until some point when the just VI reads more calculation and x = sheet! There? becomes true.

  Most of the time it happens when the csv file is about 1200 lines

  Someone knows why this happens?

  Best regards

  Stefan

  Hello

  understood, that the error occurs somewhere completely else. the thread may be closed

  BR

  Stefan

• DVD drive don't read the software after factory reset

  I did a reset to factory my laptop (XPS L502X) to return to Windows 7 from Windows 10 (due to some incompatibilities).

  Subsequently, the reader will read software.

  But fortunately, it will burn on a blank disc (using Roxio). It will not however then read the content.

  He'll play pre-recorded DVD movie

  I tried the suggestions on these forums such as the removal of the driver then re-flashing the BIOS (BIOS is the latest version).

  I tried Microsoft Fixit

  Drive is an optiarc dvd +-rw ad - 7717 h

  Device Manager he describes as a CD-ROM

  Any ideas please? Need a Christmas Miracle!

  I have it

  I ran "Launch the Dell Support Centre" of the center support Dell Dell/tous programs, and as soon as he ran that he recognized the drive.

  Thank you

• Sides of the picture not read the XMPs after scanning of metadata updates

  Hello

  I have problems with LR CC 2015.0.1 on Windows 7 SP1.

  Summary:

  When you scan for metadata updates, everything from the XMP files is loaded correctly with the exception of the coast star image. (color and development settings labels are loaded properly)

  This applies only to a specific set of images. Tests on other examples of images working correctly!

  This is my workflow:

  • I copied a set of images (a folder with 3 subfolders) to my PC and Mac
  • I gave the coast star photomechanical 5 on Mac
  • I imported all the photos into Lightroom CC on both computers (both computers are running the latest versions and patches of LR and Win 7 and OS X respectively)
  • In LR, I modified develop more refined image sides and settings on Mac
  • I saved the metadata of images
  • I took the XMPs and their transfer to PC
  • I scanned for LR metadata changes
  • LR properly imported him develop settings and color labels, but doesn't import the image sides

  I transferred XMPs three times just to be sure, but nothing has worked. I also gave notes directly on the PC and then replaced the XMP files with Mac. This reset completely all ratings to zero. He didn't ignore them (leave 2-star) - he acted as if she was reading 0 star ratings of XMPs.

  I also opened XMPs from Mac to check their contents, and of course, they contain all of the correct sides. I will paste only the beginning of a such XMP here:

  < xmlns: x x: xmpmeta = "adobe: ns:meta / ' x: xmptk =" Adobe XMP Core 5.6 - c011 79.156380, 2014/05/21-23: 38:37 "" "

  ' > '.

  " < RDF: RDF = xmlns:rdf ' http://www.w3.org/1999/02/22-rdf-syntax-ns# ">

  "" < RDF rdf: about = "".

  	' xmlns:photoshop = ' http://ns.Adobe.com/Photoshop/1.0/ "
  	' xmlns:photomechanic = ' http://ns.camerabits.com/photomechanic/1.0/ "
  	' xmlns:xmp = ' http://ns.Adobe.com/Xap/1.0/ "
  	" xmlns: to the = ' http://ns.Adobe.com/EXIF/1.0/aux/ "
  	' xmlns:tiff = ' http://ns.Adobe.com/TIFF/1.0/ "
  	' xmlns:exif = ' http://ns.Adobe.com/EXIF/1.0/ "
  	" xmlns =" http://purl.org/DC/elements/1.1/ "
  	' xmlns:xmpMM = ' http://ns.Adobe.com/Xap/1.0/mm/ "
  	' xmlns:stEvt = ' http://ns.Adobe.com/Xap/1.0/sType/ResourceEvent# "
  	' xmlns:crs = ' http://ns.Adobe.com/camera-raw-settings/1.0/ "

  Photoshop:DateCreated = "" 2015-05 - 10 T 13: 32:35.00 + 02:00 ""

  Photoshop:SidecarForExtension = "CR2".

  Photoshop:EmbeddedXMPDigest = "21F70DD88A3440DBFA2464737BD08EE8".

  photomechanic:ColorClass = "0".

  photomechanical: tag = "False".

  photomechanic:prefs = "0:0:1:000012".

  photomechanic:PMVersion = '5 '.

  XMP:rating = '2 '.

  XMP:ModifyDate = "" 2015-05 - 10 T 13: 32:35.00 ""

  XMP: CreateDate = "" 2015-05 - 10 T 13: 32:35.00 ""

  XMP:MetadataDate = "" 2015-05 - 15 T 16: 41:18 + 02:00 ""

  ...

  
  

  If the data is clearly there.
  

  To check the question, I took another series of images and performed the same test (skip the photomechanical sides and using only LR) and everything worked properly. The sides have been read after scanning of metadata updates.

  Which is perhaps the reason why LR CC will not read only the sides of a particular set of images? If the initial assessments of photomechanical somehow interfere with this process? I must emphasize that LR Mac reads correctly the photomechanical sides. I also repeat that the significance of the notes have been fine-tuned in LR after importation.

  How to fix? I wouldn't have to manually re-enter hundreds of sides.

  Thank you!

  I have more understanding of what's going on:

  The .cr2 and .xmp files contain sides:

  . CR2: side = 0

  . XMP: side = 2

  I have not found any specification of how this is handled, but I infer that it is treated in a manner similar to that recommended by the metadata working group to resolve the differences between the IPTC metadata embedded in a file and also stored in an .xmp sidecar.  I think here is this line in the .xmp file:

  Photoshop:EmbeddedXMPDigest = "EE74E1C6A44E10D4CAC648FE110E243E".

  is supposed to represent a Digital Digest (a checksum) of the content of the XMP metadata in the .cr2 files.  However, it does not match the checksum of the current contents of the file .cr2, XMP LR says, "Ah, it is necessary that the person changed the XMP in the file after .cr2 this .xmp sidecar was created."  So if I see a field of XMP metadata that is at once in the .cr2 and the .xmp, I prefer the value in the .cr2, since it must be more recent. "So, LR uses the notation = 0 the .cr2 rather than the .xmp.    Change the digest in "AD0ACF660F79AC49FD004B2DD3BC0461" causes LR read the note of .xmp sidecar.

  The XMP embedded in the .cr2 sample does not contain the usual what program added side = 0 audit trail, so I can't help you there.   But he added at some point.

  One way to solve this problem is to use the Exiftool free to remove all your .cr2 files note:

  ExifTool - xmp: side = *. CR2

  ExifTool will automatically backup copies of all files, it modifies, in case something goes wrong.  (But Exiftool is extremely robust, even with large manufacturers raw files.)

• Cannot read the CD after you have used the active file system

  I use the active file system in Vista to save my work on CD - R. I have often refer to these discs, and occasionally add other files. Once the disk is full, I start a new.

  After referencing files on a disc, I pushed the button as usual. The disc was not immediately ejected. A window on the toolbar open and told me to wait and finally ejected the disc.  When I tried to use the disc again, I could not access the data. I know that the data is still on the disk. In 'Computer' I see '327 MB 702 MB free space'.

  If I click on the drive or try to open it, I get a message "no answer." Finally, I get a window that says to "drag files to the disc to add data. Vista think it as a blank disc.

  Is it possible to access data on the disk, so I can save up to a new drive? Also, what hurts which has caused this problem? I don't want to do it again.

  Thank you!
  Bob

  Hello

  Check the drive in another computer, better check in several. CD and DVD door, especially
  RW. If the question with a single disc? There are companies that may be able to recover the
  data if it is quite expensive.

  Very good idea to have redundant backups.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">