Why two different CPU in the Device Manager in Satellite P100?

Similar Questions

• Equium P200-11R: two different processors in my device manager

  Hello
  I have an Equium P200-11R.
  When I look at the system, the processor is shown as «Intel Pentium Dual CPU T2330 @ 1.60 GHz»
  However, in the Device Manager under processors I find; "Intel Core Duo CPU T7300 @ 2.00 GHz", then "Intel Pentium Dual CPU T2330 @ 1.60 GHz!"

  Why is there another treatment showing, (T7300)?
  I am extremely confused.

  Best regards

  Hi dude

  Don t you worry it s a bug of Vista simply.
  You must remove the CPU from the Device Manager, and then restart the laptop.

  After the reboot of the new Vista will recognize the NECK properly!

  Best regards

• Drive DVD-ROM 37 error message Code in the Device Manager on Satellite M30

  Hello

  I'm new to this forum and I wonder if anyone can help? I have a Satellite installed 30-106 M which has the above CD. At present, it does not work when I go to Device Manager, the error massage that I have is that follow 'Windows cannot initialize the device of this hardware driver. (Code 37) ».

  Can someone offer me some advice please.
  Thank you
  Trevor

  Hello

  I studied in the Microsoft Knowledge base, and it seems that this error is displayed because the driver returned error in her routine to the driver entry.
  I think that you need to uninstall the driver, and then click find the hardware changes to reinstall or upgrade the driver.

  You can do it in Device Manager. Otherwise, you can remove the drive in the Device Manager list and after restart of the new mobile operating system should recognize the drive again.
  After this procedure, you should test the device if it will work.

• His problem in Windows XP Home - a yellow! in the Device Manager on satellite

  When you install the audio drivers that it finds a modem on hih def audio, then when you restart it throws an error message upward. I rolled back the driver but still need to solve the problem of noise, in Device Manager, I have one yellow, another device, PCI device.

  Audio drivers appear to be there and working, the drivers are inheritance this is just? It looks like a conflict somewhere. I went from Vista after network problems now XP has sound problems.

  Ideas please

  Hi David

  I ve checked your other assignments created here in the forum and it seems that you are an owner of Equium A100-027 PSAAQE series.
  Am I wrong?

  First of all, I would like to clarify a few things.
  Especially the yellow exclamation points appear in the Device Manager because anything could go wrong during the driver installation procedure or you have used everything simply a bad drivers.

  I think you first need to know if you have used the correct drivers!
  Please go to the page of the Toshiba driver and check again the driver versions and download again.
  I noticed that many users download the bad drivers and try to install it.

  On the Toshiba page, you will also find installation instructions. There are 2 txt files.
  One for XP and one for Vista.

  Please make sure you use the appropriate for the good OS installation instruction.
  Download all the drivers, then follow the order of installation mentioned in the txt file!

  Normally, everything should work ok and you should be able to install any drivers!

  Best regards

• can't see the readers of CD - DVD (two of them) in the Device Manager-

  over the years but recently lost sight - tried following the advice of XP but don't have filters upper and lower to remove in regedit either. all ideas

  Hey,.

  You you remember to make changes to the computer before the readers has disappeared?

  Have been updates installed or is there a hardware driver who has been updated?

  CD burning software was installed on the computer?

  I suggest you browse this Microsoft KB article on the CD player will miss. This could be a few steps that you performed earlier. But please try it once more.

  http://support.Microsoft.com/kb/982116

  Note: because these steps include editing the registry, please make a backup of your registry the suggestion of http://support.microsoft.com/kb/322756

  Also check if Device Manager the drive is detected. There are chances that the reader may have been hidden.

  http://support.Microsoft.com/kb/314060?WA=wsignin1.0

  http://support.Microsoft.com/kb/315539?WA=wsignin1.0

  In addition, through the computer manufacturer's website and see if there is a version of the software driver CD.

  Let us know if these help.

• Wireless network card does not appear in the Device Manager on Satellite L50 - B - 1 DM

  Hello!
  I bought just new Satellite L50 - B - 1 DM, model number PSKTCE and installed on Windows 7 Professional SP1 64 bit. He came without OS installed and without driver installation disk.
  Problem is that Wlan card does not appear in Device Manager.

  For my Toshiba support model are 37 drivers and programs. I have already installed: Windows 7 Professional 64-bit, all updates to Windows that appeared, SP 1, driver LAN, Toshiba Value added Package. And I tried to install all wlan drivers 4 in the list of "tool utility Intel ' also.
  Does not always display any connection without wireless WLAN card. Pressing Fn + F12 does not change. In "Network connections" is the only connection - LAN. No WLAN, no bluetooth.

  I have "Other devices" in Device Manager with yellow marks on: network controller; PCI device; PCI Simple Communication controller; SM Bus controller. USB controller; Unknown device (with Microsoft ACPI - compliant system location) and video controller.

  Any help would be welcome. Thanks in advance

  If it's not bad - just saw that my BIOS is version 1.70

• Hardware card NETWORK does not appear in the Device Manager on Satellite Pro A40

  Satellite Pro A40 with XP home. The Integrated NIC does not appear in Device Manager.
  I booted Knoppix on CD, which correctly identifies the load hardware ethernet drivers, etc., and I am able to access the internet, so I know that the hardware is OK.

  Can anyone help?

  Do you mean the LAN card?
  What status of LAN card appears in Device Manager?

• Why in the Device Manager, NIC, tab power management properties, allow this device to wake the computer check box is gray out?

  Why in the Device Manager, NIC, tab power management properties, allow this device to wake the computer check box is gray out?

  Here is the document

  http://www.RM.com/support/TechnicalArticle.asp?CREF=TEC438020

  See the Suggestion of Shekhar:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/missing-power-management-tabs/4dd34dfb-B0E9-4f62-8eb8-0b0689344281

  Political group to turn and set the option for the inside network card power management tab

  http://social.technet.Microsoft.com/forums/en/winserverGP/thread/50fdee7e-fdf7-4734-8079-3a3aa5556fdd

  Kelly XP Tweaks - on this page scroll down to #204.  On the right side you will see "power schemes/configurations of restoration.  Here are the scripts.  You should see a window with «do you want to run...» »

  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  A link that did not work... TEC438020 http://www.rm.com/Support/TechnicalArticle.asp?cref=TEC438020.

  If you delete the start TEC438020 letters... This would have worked.   Sorry but for some reason that my shortcuts duplicate urls notice the end of the above url shows the same letters that I told you to remove.  Do not forget that in case it happens again in the future.  (God forbid)

• Why can I get two different results from the same coefficients?

  I get two different results of the evaluation of the polynomial function.

  For the first, I get the coefficients of a polynomial function to adapt.  I feed the coefficients of the function made the function Eval Poly and get the correct 12.8582 result when I evaluate 49940.

  For the second, I create constant array of values that have been returned by the polynomial Fit function (I typed in).  However, I get an incorrect result of - 120.7913 when I feed the constant table the function Eval Poly when I evauate 49940.

  How this can happen when I use the same values in table?

  A picture of what I explained is attached.

  Hi Altran,

  are you sure about using the 'same '?

  You compare them? Do you have (at least) set them to 17 digits display properties?

  Please attach a VI instead of an image...

• Satellite P200 1 FT: different processors in the hardware Manager

  In Device Manager, there are two different processors (T7300 2.0 + T7500 2.2) listed. I thought that there must be two of the with each 2.2 GHZ T7500? !!

  This is nothing unusual ;) I read that it is a matter of Vista and it can be solved very easily!

  You must go to the Device Manager and remove the CPU entry in the Device Manager list.
  Reboot the laptop.

  After restarting again the Vista will reinstall the drivers and update the CPU entry in Device Manager

  After this short intervention, both processors should be recognized correctly.

  Best regards

• Re: Qosmio G40 - different processor speeds in Device Manager

  Just bought a G40-108 today and noticed something strange in Device Manager - speeds of the 2 nuclei differ.
  The first shows T7300 @2.00 GHz and the second is @2.40 GHz T7700.
  Although it isn't really a problem I am just intrigued as to why this is, may be normal but I have not encountered this problem before.

  Hoping someone can shed some light on this subject.

  Thanks in advance.

  Hi vinay

  I think I can help you. It s a good message ;) isn t it?

  OK here the solution;

  Go to the Device Manager and delete the two entries of CPU.
  Then restart the machine.

  After that the OS was loading, go to Device Manager and check the entries again.

  I think that the value of the CPU should be the same thing now ;)

  I would be grateful a short feedback

• Qosmio F16 - 14Q - internet USB device showing! in the Device Manager

  Hello

  "my USB device that connect to the internet does not and I wanted on this subject in the Device Manager, it appears under the drive of cd-rom and other two devices below the CD with"! "sign and then I removed the cd-rom drivers.

  Can some give me a link to download the cd-rom driver and help make my USB device work?
  On the drivers, I didn't know my kind of Qosmio in the driver list, he writes back the Qosmio F16 - 14Q.

  Please help me

  I put t know what USB device do you use but if it doesn't work, you must have the driver for this device of some. Part material Toshiba doesn t support third so try please talk with your internet provider and ask for help.

  Another thing: I put t know where you bought your Qosmio but I assume it has been offered to Pakistan. The right support page should be http://asia.toshiba.com/pakistan

  As far as I know, optical drive uses the standard Microsoft driver so that you won't find a driver for the CD-rom drive.

• Portege M700 - 3G does not work and has no entry in the Device Manager

  Hello

  I've already found [this | http://aps2.toshiba-tro.de/kb0/TSB0302TL0000R01.htm] for 3G installation, but it does not help me. In my device manager is no entry called 'Data Interface', and that's why the guide will not work. Under "modem" is only the "TOSHIBA Software Modem. The LED next to the orange wlan LED is off. When I use FN + F8, the I get only entries for Wlan and Bluetooth. In the Bios (or what ever Toshiba call a bios, 3 pages with very few options, very bad in my opinion) I couldn't find any option to turn on the 3g modem (I suspected that it be turned off in the Bios).

  Is there an option where my 3G modem could be turned off, so that the device manager would be ' d recognize it? WIFI and BT operate correctly.

  A new SIM card is correctly inserted in the SIM slot behind the battery. I can't find my problem described in the web or this support forum.

  Any help is appreciated!

  Hello use

  Your laptop is preinstalled with original Toshiba recovery image, I mean you have to factory settings?

• 3 monitors listed in the Device Manager on Tecra A6 PTA60E

  I have a PTA60E A6 under Xp Pro SP3 with all updates.

  I notice that in Device Manager in the monitors, I have three monitors monitors under graphics cards and Play Plug listed abd, I have the Intel 945 chipset appears twice.

  How to get back to showing just one of each?

  Shaun

  Hello

  I have 2 different laptop with Win XP and Vista pre-installed.
  In both cases, the three monitors are available and listed in the Device Manager.
  I guess there is nothing wrong with the system and the entries are correct.

  You don't have to be worried about that ;)

• Qosmio - Intel (R) Core (TM) 2CPU - system showing two different CPU

  Hi, please, what do you think about this my Qosmio PRTSC? ;)

  Intel (R) Core (TM) 2CPU system presents two different entries of the CPU

  Cheers, Hana

  Post edited by: admin

  Hello Hana

  Can discuss us please on the English language? Sorry but I can't read anything on the link you posted.

  If you have a question or want to discuss something, please try to explain it using the English language.