Satellite P200 1 FT: different processors in the hardware Manager

Similar Questions

• Equium P200-11R: two different processors in my device manager

  Hello
  I have an Equium P200-11R.
  When I look at the system, the processor is shown as «Intel Pentium Dual CPU T2330 @ 1.60 GHz»
  However, in the Device Manager under processors I find; "Intel Core Duo CPU T7300 @ 2.00 GHz", then "Intel Pentium Dual CPU T2330 @ 1.60 GHz!"

  Why is there another treatment showing, (T7300)?
  I am extremely confused.

  Best regards

  Hi dude

  Don t you worry it s a bug of Vista simply.
  You must remove the CPU from the Device Manager, and then restart the laptop.

  After the reboot of the new Vista will recognize the NECK properly!

  Best regards

• LPT1 in the hardware Manager, but not in the virtual machine settings. Parallel port software unable to find LPT. Windows 7, 64-bit and XP virtual

  Hallo,

  the forum is full of questions similar to mine and everything seems complete without useful answers some time early last year. I would like to give a try today to see if I get a solution.

  Have Windows 7 Enterprise 64 bit and installed XP mode to be able to use the chip programming hardware (GALEP-III), which is connected via the Parallel Port. Downloaded XP mode later than yesterday (24.02.2011) Microsoft.

  In the XP box, the LPT1 port appears in the hardware Manager. But it does not appear in the settings for the XP mode. The Galep software starts just fine, but can't find the PARALLEL port.

  As written above, there are many people who have the same problem and seem to have gotten no solution. One piece of advice I found was to modify the VMC

  LPT1 (378 h-37Fh)

  1

  The above did not work. I think it was for a different version of XP-mode.

  Then there was advice on LPT need 378 h-37Fh. It's fine with my pc.

  Then, there was a Council to stop the 'Print Spool' Service on the host pc. I tried in vain.

  So, if there is a solution to my problem, please let me know. Thanks in advance.

  (Note: I'm not interested to connect a printer.) I have an IC programming material that can connect only through a parallel port. It also comes with a security dongle. GALEP III).

  Good bye.

  Have you tried in this more specific Forum?

  Virtualization of Windows 7
  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt/threads

  Under settings is there anything you can do with the section of COM port, if it applies to your problem of material in the first place?

• SD-R2312 device does not appear in the hardware Manager

  I have several problems with my Toshiba SD-R2312 Windows XP. Cannot open CD, device does not appear in the hardware Manager, drive is not displayed anywhere.

  First time it happened, I was able to reactivate it as described here.
  http://www.TechSpot.com/VB/all/Windows/t-28912-desperation-Toshiba-DVDROM-malfunction-possible-missing-driver.html

  After working for a few weeks, the drive is 'gone' once again, same symptoms as the first time.
  Try the registry fix again, I found that there are still "UpperFilters" (which I've deleted again), but not Lowerfilters.
  However, which did not help this time.

  I have no "unknown" devices that I could delete (see http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=6548&messageID=22638).

  Does anyone have an idea how to get the drive working again? Is there a way to prevent that from happening again?

  Thanks in advance.

  Hello

  If the drive is not displayed in Windows Explorer, perhaps this method can help. Try it!

• Satellite P200 - 123 No Post, but still the boots

  Hello

  Have a strange, my old Satellite P200-123 worked extremely hot (70 inactive more than 100 of the load) 2 years so he disassembled and replaced the thermal grease, fans and cleaned. Standard maintenance went well, (apart from the microphone plug disintegrate at the start, but I use headphones so not really a problem).

  First boot after the interview I noticed that the screen does not display anything until windows log in screen, no toshiba screen, no post messages, etc. At first, I thought it may have lack of an external port (VGA or HDMI) however I tried to connect to an external device and he still refuses to show anything until the windows log on screen.

  I stripped and repaired hundreds of laptops (it's my job) but never encountered this in 15 years of maintenance and repairs PC and laptop. System running Windows 7 (not like it should make a difference) and the used thermal grease was the new Artic MX-3 and served on the GPU, the CPU and the Northbridge (and before someone says you must use the compound of unfounded pressure of toshiba ceramics, stuff I've used here are better for this the toshiba recommended stuff, believe me). The system works well (now idling at 39 and 65 at full load), I guess that's not much of a problem, unless I need to reinstall or restore my machine for some reason, all the world has an idea on how to fix this?

  Very interesting, Jaster! :)

  Thanks for sharing this information with us!

• Satellite P200 - 17 c: how to change the dedicated video memory of Radeon HD 2400

  I just bought a Satellite P200 - 17 c. The ati mobility radeon HD 2400 grafic card was supposedly 895 MB.
  However since I found the card has 128 MB of video memory dedicated.

  Can I pass it and if so with what?

  I would like to add a few details.

  On my L30 with ATI graphics and a Vista I m capable of changing some graphical settings of the graphics card ATI catalyst.
  You can choose between quality and performance.

  Play games, I noticed that it of better spend some controls performance. Then some games works well

• Satellite P200-1EE does not properly of the HD-DVD play

  Hello

  My Satellite P200 - 1EE laptop doesn t play DVD s correctly when the DVD loads up it plays but stops and starts as a 'jump' CD and the dubbing is very bad.
  So, I tried the setting on my DVD player program but made no difference at all

  I think HD-DVD player is broken.
  Can someone help?

  Hello

  I guess you are trying to read HD DVD using the HD DVD from Toshiba player.
  Am I wrong?

  So first of all, you should try to update your HD Toshiba DVD player software.
  Then, check if the HD-DVD player firmware update is possible.

  The two parties, you should find on the European driver Toshiba page!

  I noticed that Toshiba updated own HD-DVD player software and that has solved several problems about the HD-DVD playback.

  Good luck & best regards

• Satellite P200 - option SATA missing after upgrading the BIOS

  Hey guys!
  First sorry for my englich
  So I have a toshiba satellite p200 1jy upgrade the version of the bios (Phoenix bios) 2.70, but when I update upward I don't have the option of ahci sata or ide mode, I do not have this option, but I had before upgrade,
  so please what can I do to switch to ahci or ide mode, can I downgrade the bios version

  So thank you we

  Hello

  Must add driver SATA while installing Windows.
  During the installation process you will be asked to add the driver (F6 key)
  Then you could add the connected USB floppy disk driver.

  More details how to do here:
  http://APS2.toshiba-tro.de/KB0/TSB7B020R0000R01.htm

  or here

  [How to integrate the AHCI driver when installing Windows XP | http://aps2.toshiba-tro.de/kb0/HTD9401AN0000R01.htm]

• Re: Satellite L40-139 - 10 error code in the Device Manager on the wireless network card

  I have a toshiba satellite L40-139 and I just instaled windows 7 64 bit on it. Since that time my atheros wireless device will not work. I tried updating the driver and windows but nothing.
  In the device manager says code 10 DEVICE can NOT START.

  Help, please!

  Thank you!

  Hello

  If you read here:

  http://support.Microsoft.com/kb/943104

  The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager.
  Then, go to the page of the driver and update the driver. If you do not have to win 7, try the vista driver.

  Welcome them

• IOM - different email to the User / Manager

  Hi all
  In IOM, I need to send emails that are different to the user and his Manager at the end of the process task. I tried assigning two notifications on the status of the task - C (complete) but its not not allowing me to do so because as mapping / the status of the task must be unique.
  
  Please let me know how can I send different emails to the user and his manager.
  
  Thank you

  Upon completion of your task in process, you can trigger two tasks (send a Mail to Manager, send a message to the user and join two task-specific templates) and trigger their answer your task in process Completed.

  Attach tcComplete adapter for both tasks (send mail to the Director, send a message to the user) so that they are self done.

  Thank you
  Suren

• Re: Qosmio G40 - different processor speeds in Device Manager

  Just bought a G40-108 today and noticed something strange in Device Manager - speeds of the 2 nuclei differ.
  The first shows T7300 @2.00 GHz and the second is @2.40 GHz T7700.
  Although it isn't really a problem I am just intrigued as to why this is, may be normal but I have not encountered this problem before.

  Hoping someone can shed some light on this subject.

  Thanks in advance.

  Hi vinay

  I think I can help you. It s a good message ;) isn t it?

  OK here the solution;

  Go to the Device Manager and delete the two entries of CPU.
  Then restart the machine.

  After that the OS was loading, go to Device Manager and check the entries again.

  I think that the value of the CPU should be the same thing now ;)

  I would be grateful a short feedback

• Unexplained activity in the use of the processor in the Task Manager

  I am running Windows XP - sp3 in a laptop that works exceptionally well.  When I go to the Task Manager with no applications running and is connected to the network or not (no network activity).  The cpu usage graph use of 28% of all 15 seconds.  This has no effect on the operation of the units. I use Microsofts antivirus app, and there is no trace of any other anti-virus program. I scanned for any viruses or malware and clean air unit.  I would like to find out what is causing this cyclical use of CPU.  Is it possible to find out.  Thank you.

  chasx5

  Download Process Explorer (freeware).
  For more information about Process Explorer, see here:
  http://www.Microsoft.com/technet/sysinternals/SystemInformation/ProcessExplorer.mspx
  Hope this helps, Gerry Cornell

• Satellite P200 - 1 K 9 - dirt inside the LCD screen

  Hello

  I have a problem with my screen, it works fine, but there seems to be a specification of the dirt of somekind inside the screen, it is not dead pixels because you can see them when the screen is off. another poster commented on this problem, but the response was not very helpful. any suggestions?

  And yes my warranty ran out. the laptop is a P200 - 1 K 9, about 3 years now and it is very annoying. about a dozen small spots around my screen, they look almost like chips little plastric, nothing more than 5 mm long, and in different directions. This laptop has never been anywhere except in and around my house.

  I put t know what kind of suggestions you want to read here.
  If you want to clean screen must be disassembled, cleaned and put together.

  Either ask the service to do this on the professional track and for costs or try to do it on your own including risk of damaging something.

  Out of curiosity, what kind of answers you have before?

• Re: Satellite P200 - no picture DVD playback with the playback of DVD Toshiba Software

  Hello

  I usually watch DVDs with the Toshiba software that has been bundelled with my P200 I bought last year.
  However, the image is no longer displayed.

  Sound is OK, as well as the control system, but the real picture is black.
  I thought that the player might be at fault but DVD works fine in Windows Media Player.

  All are in the correct region and DVD which I played before without a problem.

  I have tried rebooting etc.

  Any suggestions would be greatly appreciated.

  Kind regards

  Richard

  Hello

  Have you tried to install the most recent DVD player software or update the old one?
  You should do this!

  As far as I know the new DVD player tool was released and it s placed on the European driver Toshiba for the download page.

  Check it!

• Satellite P200-1EE: charger problem after replacing the AC adapter / CC

  After changing my AC power (the old one didn't work anymore) I have problems with the battery charging circuit.
  When the adapter is plugged in and the laptop is turned off, it charges the battery OK.

  If I turn it on it will charge the battery until it is fully charged, the light will be then turns blue for a few seconds and then turns off.
  The battery will then race down until it is completely empty, even if the power adapter is showing as connected.
  Once the battery is fully discharged cell breaks down. Once off, it will start to load again.

  Someone at - it ideas to help me please.

  Hello!

  A friend of mine had a similar problem with its Satellite laptop. He bought a not Toshiba AC adapter and the battery could not be loaded.
  After that, he bought an adapter AC from Toshiba and everything works now.

  On the Toshiba site, you can search for compatible adapters:
  http://EU.computers.Toshiba-Europe.com-online services & -online Options of PC Accessories devices & -Online Homepage Options & accessories PC

  Good bye