Why windows 7 don't recognize iolo sys mech pro like a virus checker

Similar Questions

• Why windows 8 do not recognize my gmail account

  When I try to set up my mail in windows 8 it will not recognize my gmail account

  Hello

  Google will support is no longer new Exchange ActiveSync (EAS) of Windows PC connections and tablets to synchronize your email, calendar and contacts from Gmail. If you have already signed in to your Google account to your PC under Windows 8 and Windows RT using e-mail, people or calendar applications, you don't have to do anything. Existing connections of EAS accounts Google will continue to operate.

  If you try to connect to a Google account after January 30, 2013 to your PC under Windows 8 and Windows RT using e-mail, calendar applications or people refer to this article.

  How to sync Google services with Windows

  http://Windows.Microsoft.com/en-us/Windows-8/use-Google-Windows-8-RT

  This could also be a good time to just switch to Outlook.com, a new personal messaging service that is clean and intuitive, keeps your address book up-to-date with information from your favorite social networks and includes management tools powerful Inbox and more.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Why windows 7 does not recognize my blu - ray player

  I upgraded fron vista to windows 7 and now when I put a blu - ray disc

  1 it will not play

  2 it does not recognize the drive

  If it's a movie/TV Blu - Ray disc, then Windows 7 will not play it unless you install 3rd party software/codecs. These can be either purchased or there are those who are free available.

  Check any software initially provided with your PC of any media player grouped as those of Cyberlink or Arcsoft.

• WHY WINDOWS 7 DOES NOT RECOGNIZE MY INTERNAL CD

  I have an all in one system of lenovo b320 running win7 home pro. 64-bit and the cd/dvd rom internal is not found how to fix this or why it is happening

  Hi Barbara,

  There seems to be a problem with the CD ROM not getting not recognized.

  Were there any changes (hardware or software) to the computer before the show?

  Perform the steps from the link below and see if it helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Important:  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/( )

  Good day!

• Windows 7 don't recognize the existence of the second drive hard unformated. How can I format drive's system does not recognize that there is so I can format the drive to use for backup?

  The two HDD are identical, WD750GB. Cannot find how to format a drive unreconized in help.
  First HARD drive is SATA and using 64-bit format and want to use the same for the second.

  Run Disk Manager , format the drive and it assign a drive letter:

  1. press the Windows Logo + R , type diskmgmt.msc in the box, and then click OK .
  2. right click on the drive and click format .
  3 right-click the disk, and then click change drive letter and paths .

  I don't know what you mean by "using the 64 bit format".

• Why windows media do not recognize a blank cd

  try to back up photos on a cd and media tells me to insert blank cd is already empty and when I try to play music cd it will not read the

  Hello

  ·         You can read the Windows CD explore?

  ·         Were there recent changes made on the computer before the show?

  I suggest you to follow the steps in troubleshooting this article and check if it helps.

  Resolution of the problems of reading in the Windows Media Player for Windows XP

  http://support.Microsoft.com/kb/306317

  See also:

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

• Why windows 7 don't overwrite not the names of existing files

  I have Windows 7. When I save a document or a spreadsheet, I want to start with a file name and add a version number to it, but Windows just replaces the original file. For example, I start with Doc1.doc and then call Doc1v3.doc. The system replaces the original Doc1.doc instead to add the version number. It is causing a bit of a mess with version control, and I'd appreciate any help to solve this problem.

  I think that Office word forum would be a better place to ask.

  If you change your question and select the office and section, and the version of the year.

  But just as a suggestion until your question is moved.

  If you use word, and you open a doc file,.

  Make your changes / additions and use Save as... .and when you close word a popup appears asking if you want to save changes, click No because the word refers to the doc first not open save it under... doc.

• Why windows Defender off when I installed AVG 9 Pro on windows 7?

  HI there are 9 AVG pro off windows defender and when I turn it on it just auto turns off again does anyone have a clue as to why AVG turns off windows Defender? Defender is with the new AVG 9 pro more necessary. no help to avg because there is no forum for paid users and it free forum sent helps you. someone else who uses AVG has this problem.

  AVG 9 Pro comes with anti-spyware. This is the reason. Life sucks! Get used to it.

• Why windows 8.1 used updated work on the pro version of the 'store '?

  I installed windows 8 two weeks ago and today I am updating in the store (my computer told me to update as it is available). I went to the store and he said that he could not download 8.1 since I am a company or a multi-license version. What should I do to make the update available?

  No, the distributions of license in Volume of Windows 8, Windows 8 Pro and Enterprise using KMS and MAK licenses should be updated by downloading the installation files for Windows 8.1 since the volume or TechNet/MSDN license health center if you have a subscription or install based on the settings of your employers.

  You cannot update these distributions by the store.

• Why Acrobat 6.0 Standard recognize the scanner but Pro 9 will not?

  I use these two programs on an Intel Mac (same machine), 10.5.8 Progam.  My Acrobat 6.0 Standard pulls into the scanner immediately, but my Pro 9 will not recognize the scanner.  Is there something I need to do to get the Pro 9 to recognize the same scan?

  Go back to your other thread and read my last post on the SANE / S.A.N.E. Project The TWAIN driver.

• Serial number don't recognize for Acrobat 9 Pro (in CS4 MC) after update to 9.5.5

  Hello

  My CS4 Master Collection works on MAC OS El Capitan, except Acrobat 9 Pro. Judgment of the Acrobat 9 Pro at the start.

  I do the successive updates of 9.1 until 9.5.5 (23 updates). Acrobat now accept to start, but he asks me the serial number, and when I type the serial number of my CS4 Master Collection package, it is not recognized.

  Help, please.

  Hi christophel79691303 ,

  Please see this KB article:- https://helpx.adobe.com/creative-suite/kb/error-invalid-serial-number-acrobat.html

  https://helpx.Adobe.com/Creative-Suite/KB/invalid-serial-number-CS4.html

  I would like to know if it works.

  Kind regards

  Christian

• There was an update to Windows XP sp1 would recognize higher than 127 readers ~ 137 GB, why this update was not in the version later service pack?

  (1) there was an update to Windows XP sp1 would recognize higher than 127 readers ~ 137 GB, why this update was not in the version later service pack?

  (2) where can I find so that I can then reinstall windows XP, updated to sp1, install the patch to see the complete player to sp2 and 3 can be installed?

  original title: supervision XP

  Maybe the disc has been formatted as part of your original installation of Windows XP with a pre - SP1 version of Windows.  At that point, he could only format the drive as 137 GB.  After you upgrade to a post-SP1 version of Windows, look at your hard drive with Disk Manager (start-> Run-> "diskmgmt.msc").  It can show the rest of your unused space that you might then be able to allocate in a second partition.

  If you want to keep one big partition, you will need to get a 3rd third party tool that can extend your current 137 GB partition to use more of the available space.  Google for it, plenty of them out there including those that are free.

  HTH,
  JW

• Why do my windows media sometimes not recognize that there is a disc in the drive when I am trying to burn music on the disc,

  Original title: windows media problems
  Why do my windows media sometimes not recognize that there is a disc in the drive when I am trying to burn music on the disc,

  If you restart WMP when this problem occurs, which helps?

  It seems that the AutoRun or AutoPlay got disabled on your system. Please try the instructions in the following article to reactivate these:

  http://support.Microsoft.com/kb/330135

• CD/DVD drive is ejected disks after about 4 minutes. Often don't recognize the presence of the disk.

  Unit acted almost since. Don't recognize some discs, acknowledges some, even new program disks. When I can get it to play a DVD, it will appear yits in 4-5 minutes.

  Hello billyrhelms:

  Welcome to HP forum. Well, I see you found piou HP CD/DVD drive. This is a normal behavior how wonderful. CD and DVD have codes unfortunately HP Touchsmart will not open disks. You must use the Mexwell of HP brand discs or diskettes. Now for movies you have to pay for this updatehttp://www.cyberlink.com/prog/update/v2/update.jsp?fileTypeId=1&PRODUCTNAME=TouchSmart&PRODUCTVERSION=3.2_MediaSmart_4.0_DVD&VERSIONTYPE=BD+OEM+2ch&CHANNEL=OEM&LANGUAGE=ENU&OSREGION=0xf4&SYSTEMLOCALE=0x0409&BU=CLT&MAJORVER=3&MINORVER=2_MediaSmart_4&BUILDNO=4.0.4215&VENDORNAME=625&SR=HTS091023-02&DEVICE=DVD_Pre&PATTERNID=186873&BB_ID=58908&HWID=None&Model=None&APREGID=9649aabba4fa4bc2508c841e4b64e17a&UUID=None&affiliate=625_732_572_HTS091023-02_58908_186873_1-1_None_9649aabba4fa4bc2508c841e4b64e17a_None_0&utm_campaign=BB_&utm_source=BB_TouchSmart_625_&utm_medium=BB_TouchSmart_58908_Patch_Enhance_HTS091023-02_186873__ Not cheap very expesive $84.00 . If yoi is problems with the software disk. Insert the disc and then close this useless tiny window witch I find this very annoying.  Left click on (Edrive select properties and choose witch Windows to open the disc in.) The computer ejects disc not compatible and softawre

  It is one of the reasons why people are turning to Apple computers or other computers of the brand.  Please read forum. This is not the first time that this issue has been published. Please click on Bravo, if I answered your question. Thank you frrw.

• Windows 7 will not recognize the dvd drive

  Windows 7 will not recognize the dvd drive, although it worked well for more than two years.  Now I can't access it to install new software.

  It will not be displayed in the Device Manager, bad shooters to say it is not connected or is, tried Fixit fix (could not as "not applicable to your computer update"), uninstall iTunes (in the case of a conflict - even if it worked with the DVD of > 1 year), etc., but still cannot access the DVD.

  It's obviously a known issue, given that a support page - http://support.microsoft.com/kb/976187 that recommends the fix or manually disable ALPM active power management.  If it of a known issue, why is not included in the updates and that I have to disable ALPM power if management it worked ok before?

  What now? Is turn off the power, my only option?  What happens if it is not yet recognized after that?

  Hello

  If the drive is viable:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find CMD top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951

  
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">