Wi-wired and OfficeJet 8620 connections?

Similar Questions

• WRT54G - need assistance to use wired and Wi - Fi connections at the same time

  I am trying to set up a home network and would like to have my Wired PC and my laptop using the WRT54G as a hub, router wireless.  Have been able to do all the cable, but not mixed.  Help!

  So basically, you want to enable file and printer between your computer share. Follow this link to enable sharing of files between your XP and Vista computer.

• Impossible to install the KB2744842 update, get 80072EE2 error code and have problems connecting to the Internet

  Original title: 80072EE2 and KB2744842

  Tried to install update Cumulative security for IE 9 for Windows Vista for x 64-based systems (KB2744842).
  The installation failed, and now the internet connectivity is corrupt.

  Errir received message is 80072EE2.

  Tried several reboots, power/power on the router, ISP shows works, but cannot connect to the internet.

  Help, please!  And what happened to the phone support for Windows Update problems?

  Hello

  1 did you do changes on the computer before the show?

  2. do you receive error messages about the inability to connect to the internet?

   

  Work with the question about the installation of update KB2744842.

  Method 1:

  See the site:

  Windows Update error 80072ee2

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80072EE2

  Method 2: Install the update manually to the clean boot

  Step 1: Clean boot

  When the computer starts to boot, programs non-Microsoft will not be started and would avoid any interruption of their share.

   

  Check out the link:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: once you are done with the boot, follow step 7 in the article to set your computer to normal startup.

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

  Step 2:

  Download manually on the site:

  A security update cumulative for Internet Explorer 9 on Windows Vista (KB2744842)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=34732

  Addressing the issue with the help of an internet connection:

  Method 3:

  See the site:

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  You can also consult the site:

  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  You can visit the hotline:

  Microsoft Technical Support phone numbers

  http://support.Microsoft.com/kb/319726

• My laptop is one of the 4 home cannot connect to the internet, it's Vista and it has connected w/Ethernet no problem, I called Xfinity tech, that says, is the problem of configuration! Can you help me?

  Acer laptop, Vista is, she can connect wirelessly with my friend modem but my house, she can't, I use the service of Comcast, they checked the modem is fine, they think that the problem of configuration! I'm not computer too, thank you!

  Ryan (Shih Chi)

  Hello

  How do you try to connect the computer to the House? Wired
  or wireless?
  Try the methods provided and see if it helps to solve the problem.
  Method 1:
  Check out the link and follow the troubleshooting steps in the article.
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  Method 2:
  If you try to connect to t Wireless net work then refer to this link and follow the steps.
  Connect to a network with Windows Vista wireless
  http://TechNet.Microsoft.com/en-us/library/bb878035.aspx
   
  Method 3:
  Reset TCP/IP on your computer and check. Check out the link and follow the steps.
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357
   
  Method 4:
  You can also visit this link and follow the steps.
  
  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us
   
  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows

• Help! I have Windows Vista and my internet connection goes out a lot!

  I know that this is not my fault for routers because nobody else has this problem and my xbox internet never goes out! Help, please! What is my drivers? Or what you please, you can add me on Skype - xEntertainable

  Hello

  1. is it wired or wireless?

  2 have had any changes made to the computer before the show?

  Please follow the steps in the link.

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Im having truoble internet connection, even if I have a signal and everything is connected

  Im having truoble internet connection, even if I have a signal and everything is connected.  I ran the repairs and doing what he had asked, however I am still unable to connect to the internet?

  I have a WiFi router, and even if my desktop pc lacks a coneection wirless, I bought a wireless adapter for it, so I can connect to the internet, but there is a problem with the connection.  everything worked fine and then it just stopped and refuses to connect. I run the diagnostic report and followed the instructions but it does not connect truncated.  What can I gdo now?

  Hello

  1. you get any error message?

  2. don't you make changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Follow the steps mentioned in the links below

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks (Also applies to Windows 7)

  Method 2:

  Follow the steps mentioned in the link below.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

• OfficeJet 8620 two problems one) Win7 firewall connection wifi and b) the printer multi-network

  Bought the printer this afternoon and set up a computer - connection to a printer with wifi as advised in the closed paper work and CD. No problems.

  When I put it in place of the second computer (with wifi) using the CD provided, I received an error message that the hp software can see the given IP address printer but he could not automatically connect using the "typical connection method. Tips in the dialog box has been to change the settings of firewall computer method of 'typical connection '. Any advice on what this might be. Looking at the Win7 firewall, all HP printer software are checked for the home network and the public. What else the firewall must Win7 allow to operate the automatic printer connection?  BTW, I followed the advice of the installation software and punted for the moment. The warning by the software that was if the printers IP address changes, I'll have to manually change it into the computer with the firewall issue (ugh).

  That leads to the second problem:

  A couple of my computers are ethernet only. No wifi. When I plug ethernet to the 8620, it defines an IP address for itself on ethernet, but he abandoned the wifi IP address. How can I feel some ethernet connected computers and some wifi connected ones.

  Any constructive advice is VERY WELCOME.

  I apologize in advance if there is already a solution posted either of these problems; I couldn't find searching them the forum.

  Lenny W.

  Hi lennyw07016,

  Thanks for letting me know that worked for you.

  I suggest the setting up of a static IP address. In this way the router will always assign the same IP address to the printer.

  Printer does not keep the wireless connection.

  Proceed to Solution 3: printer of the assign a static IP address.

  Here is a document for configuration of a firewall to allow a connection with the all-in-one Windows.

  You can check if you like.

  Thank you.

• Officejey 8620e Pro: Officejet Pro 8620 connect wireless but not visible by any other device of

  Printer was fine for 9 months.  That is, Apple devices could print using AirPrint.  Computers laptops MacBook Pro and Windows 8 were also very good.  But now printer is not visible by any device when trying to print / set up a printer.  Finally managed to do work with a USB cable, but it's not practical for all members of the family.  Have you tried:

  Full power reset

  Reset wifi

  Updated drivers

  Recycled all devices that are used to be able to see the printer.

  To confirm, the printer says that it is connected to the wifi & AirPrint and wakes up when the control panel is touched.

  Thanks in advance

  Hello @Insightful_Chap! I'd love to help you with your Pro Officejet 8620.

  I understand your description that the printer is connected to your network, but is no longer visible for your devices. Although the printer is connected, I would allows you to use the following document to solve the problem as it will guide you through the necessary steps: HP Officejet Pro 8610, 8620, 8630, 8640 and 8660 e - all-in - One Printer Series - printer does not maintain the wireless connection.

  Please let me know the results of your efforts and we can go from there.

• OfficeJet 8620: Reset username and password on HP 8620

  All of a sudden thte scan 4-digit does not work and I get a message saying "username or password is incorrect...". »

  I don't remember having a user name or password, and both are required to change the settings. On the homescreen of the built-in Web server, it shows all the features have been locked by the administrator.

  What should I do?

  Thank you

  John

  Hi John, aka @DRJHS!

  Welcome to the HP Forums

  I saw your post about the reset of the identifier and the password on your Officejet 8620 and wanted to say with my suggestion. I would say for you to try to access the Wireless menu on the printer and select "restore default network - Yes" and then turn the printer back on. The unit must be connected to your network, but you should not see the message indicating that the user name and password are incorrect.

  Let me know what happens!

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

  Thank you!

• HP Officejet Pro 8625: How many times and how often that redial officejet 8620 faxes?

  How often and in what intervals fact officejet 8620 fax redial?

  Where can I see the status of all pending composed?

  Hi RCP45,

  Welcome to the HP Support forum.

  I understand that you use a HP Officejet Pro 8625 e-all-in-one printer, and you would like to know how often the printer will recompose faxes would know viewing pending composed. I would like to help with that.

  When you set printer busy redialn, or no response redialn, the printer will automatically start to dial the number of the recipient of the fax, the first transmission fails without delay. He will continue trying to send up to cancel key.

  Because once the fax is cancelled the fax number must be entered again, either manually or selected from your speed dial entries, there is no list of faxes pending.

  Please let me know if that solves the problem, or if you need assistance.

• My laptop connects is more to the internet, either hard wired or wireless. When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.

  My laptop connects is more to the internet, either hard wired or wireless.  When it is hard wired, the laptop displays connection but I can't access the internet, and I've done it before.  My other computer has service very well (or I wouldn't send this message) I checked everything, what to do?

  original title: internet connection.

  Hi vonhatten,

  1. Did you the latest changes on the computer?
  2. You receive an error message when you try to connect to the internet?
  3. You have security software installed on the computer?

  Refer to the article below and try the steps mentioned, check if it helps.

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• I recently changed internet service providers and now my Wired desktop can't connect to the internet.

  I recently changed internet service providers and now my Wired desktop can't connect to the internet.  I noticed that the connection is showing 'Automatic private address' can I connect all my fine wireless devices.  I did extensive troubleshooting with my service provider, but they suggest that my master's degree network adapter must be replaced.  I updated the driver, and the device manager says it's working properly. If I connect the same wire for my laptop, it works fine.  This is just my office.  Any ideas how can I fix?

  Hello

  Follow the steps in the KB article below and see if that fixes the problem.

  How to troubleshoot possible causes of Internet connection problems in Windows XP
  http://support.Microsoft.com/kb/314095

• HP officejet pro 8620: trouble with 8.1 to Windows and hp officejet 8620

  Hi, we installed a new printer hp Officejet Pro 8620.

  We installed the complete package on a Windows 8.1 machine.

  Everything seemed fine, but suddenly our machine is not capable of printing on certain circumstances:

  -It cannot print from:

  (a) the notebook: error message "incorrect parameter".

  (b) office: Word, Excel, etc. not error, but she simply does not print

  (c) adobe Acrobat: no error, but it simply does not print

  (d) the configuration of the printer print test: error

  but it CAN print from:

  (a) assistant of hp, hp print scan and doctor printer (hp software)

  (b) hp AiO printer remote (it's a Metro app), only PDF files

  (c) Internet Explorer, Google Chrome, etc...

  We tried to reinstall without success. It seems that it is something wrong with the driver and office, applications ideas? Anyone with the same problem?

  Best,

  K

  Finally, we used the solution proposed on:

  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/is-Windows-8-1-and-HP-8620-compatible/TD-p/4099680

  The trick is for 8600 driver must be downloaded and installed before the change. 8600 drivers included with 8.1 do not work.

  We will wait for the 8620 new drivers that might resolve this issue. In the meantime, we can print with 8600 drivers and scan with 8620 drivers.

  Best,

  JM

• limited connection - wired and wireless connection

  all devices, but this wireless to a 3 and 2 wired connection works with router/isp

  one device gets continually unidentified network

  have tried changing ports - resetting routers and cables

  Tech ISP could not solve

  even added a wireless - device to connect netgear usb and used to connect

  He sees the network and tries to establish connection, but only gives limited connection and leave it as a network not identified on the local network connection and Wi - Fi

  ran on CMD - ADMIN MODE

  netsh winsock reset
  netsh winsock reset catalog
  ipconfig/flushdns
  ipconfig/release
  ipconfig / renew

  

  None of your answers allowed. I ended up understand mine. My avast firewall was blocking the internet. When I updated the driver for the firewall port and changed its settings, I was able to access the network again.

• [Win7] How routing metric is determined when wired and connected to the same subnet and enabled both wireless adapter

  We have one under the Network Setup:

  1 Win 7 laptop with the wireless and wired adatper1 card1 enabled and connected to the 192.168.1.0 network.

  WLA1 - 192.168.1.2

  WA1 - 192.168.1.3

  2 Win 7 laptop with the wireless and wired adatper2 card2 enabled and connected to the 192.168.1.0 network.

  WLA2 - 192.168.1.4

  WA2 - 192.168.1.5

  WLA1 and WLA2 are connected by a wireless access point.

  WA1 and WA2 are connected via L2 switch.

  Every time we ping from laptop1 to 192.168.1.4, need the wireless path.

  Similarly, when we ping from laptop1 to 192.168.1.5 only need to access wired road.

  In addition, if we disable WLA1 in laptop1 and laptop1 192.168.1.4 ping, ping does not occur and ping is successful only if the wireless network adapter is enabled. It does not take the cable path.

  I just sub questions:

  -On what basis the route is chosen correctly?

  -Can we expect this happens all the time or roads can vary according to certain parameters?

  -Why it only takes the path wired when we ping from laptop1 to 192.168.1.4 after having turned off the WLA1.

  RB

  You will get a more definitive answer on metrics on Technet

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home