Wide range of calibration, once again.

Similar Questions

• How to display correct sRGB images in applications unmanaged Vista with a wide range of display?

  Hi all

  This isn't a simple question, and I don't expect the answers to be simple either.

  1. I have vista home premium
  2. I have a wide range of LCD, a screen with a significantly wider than the sRGB color profile (sometimes incorrectly called a display Adobe RGB)
  3. I have it calibrated with a Spyder3Elite
  4. Images look GREAT in color managed applications (including the windows photo gallery)
  5. Photos have air saturated outside color management applications, even if they are sRGB images.

  Here's what I need.  If an application is not color management then Vista should apply the sRGB profile AND map it on my monitor profile.

  What is happening now is the image is mapped directly to the color space of the monitor and let the oversaturated colors. The end result is that all images within windows and Internet Explorer are saturated. The only solution for navigation is to use a plugin to make the management of the colours of firefox or use safari.

  BTW. Even if windows photo gallery is the color of the slide show management is not argghhh.

  I have looked at the Advanced tab on the Vista color management, but did not find ANY documentation on the 'device profile' or 'View profile status' settings. They seem to be associated with what I need, but there is nothing in the help about it. What do mean? second question, sorry)

  Concerning
  JzE

  PS. I checked the color management using the 4 images at http://www.color.org/version4html.xalter. I have saved their drive and use them as a reference to quickly check if an application is successful or not color.

  I received this reply from Michael Bourgoin. Thank you, Michael, we now have at least one answer...

  Hi J___,.

  I wish I could give you some good news, but the fact is that most of the components of windows and the Windows desktop are always not color management. The Windows Photo Gallery and Windows Live Photo Gallery are the only elements of the Windows color reach the display profile. Most office applications will honor profiles embedded in images, source but then they convert to sRGB and throw it on the screen. And IE is not even honor profiles embedded in images...

  That you have determined, the settings in the color management control panel affect only the applications of color management. The settings in the tab Cpl Advanced CM are used to provide default values for the missing profiles needed for the creation of color transformation for WCS in color management applications. Again not to help.

  Regarding the application non-management of color management color "behind their backs" goes, it's very difficult to do in general. There is no easy way for the OS to tell if the color data that renders an application has already been color managed, or not.

  We have a technology called high color which will be in Windows 7 that aims to solve this problem. Color high-definition given color are first converted into a color space extended which uses the sRGB primaries, but which allows the values less than 0.0 and 1.0 above (let's call it sRGB-XR). Colourful is closely related to xvYCC and X.v.color of Sony. Range wide color data can be converted in this space with no loss. Displays (and maps) that support colourful are necessary to convert this space sRGB-XR internally to their native color space. With color high definition, the United Nations - RGB color management is treated as sRGB, which is unchanged when converted to sRGB-XR space (it's all in the [0.1] part of the encoding). But then peripheral compatible High Color will map correctly that in their native space, so the sRGB data never get oversaturated in being treated as if she was already in wide range native of screen space (as happens now). And any image content real wide range gets correctly mapped to take advantage of the wide range of the screen. The plumbing for High Color is under Windows 7. However, the Desktop Window Manager could not implement a high color support in time (this requires the use of a fixed or floating point rendering surface), if the Bureau will not use color high definition, however, in Win7. Maybe the next time.

  I would like to be able to give more excuses, explanations and communities.

  Best regards

  Michael Bourgoin
  Program Manager | Experience Windows & Imaging Team color
  Microsoft Corporation

• If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch

  If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch.

  Hello Anshul230499,

  Thank you for using communities of Apple Support.

  If a download was interrupted in the Mac App Store, then whenever you have new Internet download should then restart.

  If a download application is interrupted

  Once an Internet connection is restored, your purchased downloads should restart automatically. The Mac App Store may warn you that there is a problem with the download and ask if you want to restart downloads. Confirming will restart all pending downloads.

  Download time may vary according to the size of the file and the speed of your Internet connection. See this article on purchases made on iTunes Store for more information on the time to download large files.

  Troubleshooting the Mac App Store

  Take care.

• the blocked sites listed in options disappear when the browser is closed. have to list them all once again, if I want to disturb.

  Listed in a short list of sites from where I want Firefox blocks cookies (doubleclick, for example), following the instructions on https://support.mozilla.com/en-US/kb/Enabling%20and%20disabling%20cookies. However, when I close the browser, the next time I open it, the list is empty. Of course, I get cookies from the sites I want to block.

  Hello

  You may need to disable the Preferences of Site in (Alt + T) Tools > Options > Privacy > settings. Please also see that.

  ...............................................................................................................................

  Useful links:

  Everything on tools > Options

  Beyond the tools > Options - about: config

  Subject: config entries

  Which is preferably that? module -quickly decode about: config entries - after installation, go inside on: config, right-click preferably, enable (check) results of MozillaZine Board, and once again right-click a pref and choose MozillaZine reference first.

  Keyboard shortcuts

  Files & Firefox profile folder

  Safe mode

  Problematic Extensions/add-ons custom

  Troubleshooting Extensions and themes

• State Bar has disappeared, once again (November 9, 2011)

  After a few updates, today disappeared from my status bar, once again, and I can't understand how to get it back. I had status-4-Ever forever, but it's been so long that it happened that I'm not sure what to do. I messed around with it several times and restarted Firefox, but it is not it.

  "Ctr /" is the shortcut to activate the module bar, and it's the same as the view > toolbars > (check | uncheck) the module bar.

• I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

  Hello Varshil07,

  Thank you for using communities of Apple Support.

  If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Have a good.

• HP Pavilion 15 laptop: Short hard drive DST check failure... once again.

  A question that I had resolved a few months ago started occurring again, in which the laptop is struggling to load things when started and soon after falls down and has to be restarted. I guess that means that the hard drive has failed once again and so I have no doubt about how to solve this problem, but I write this query to ask: why? Why has a laptop, I had since not even a year at this stage has already had the same problem occur twice, even with the replacement of the piece that broke the first time? I am willing to assume that this is something to do with excessive I will admit that it is enabled for a good part of almost every day, often for several hours I play the games on Steam on it. Currently, I do not plan to have the hard drive replaced again because it is clearly an issue that will keep occurring that the way things are and if I can get a PC that won't break every time a gust of wind so it hits. Any information on why this happens and how it could potentially be avoided in the future is appreciated, especially if it offers a solution that doesn't involve payment of an exorbitant amount of money.

  The worst enemy of hard drives is heat. If you play on a computer that is pushed to the limits of the game, a lot of it can wear on a hard drive for a few months. You get a lot of activity of fan during the game? A cooling pad may be an option, or on a computer box of Grandpa instead of a laptop for the games.

• I have a 6 and when I said an iMessage that he will tell me when the person read it then it will say delivered once again so I don't know when it was read

  I have a 6 more and when I send an iMessage he tells me when the person read it then it will say delivered once again so I don't know when it was read

  I have exactly the same problem since I updated to 9.3, the 9.3.1 update didn't fix either. Apple support think it could be a software problem or operations and I have tried literally everything! Have you found a solution for this yet?

• When I change bookmarks and close firefox and open upward once again changes to my favorites are returned to what they were before, I changed them?

  When I change my favorites and the close firefox and the open upward once again changes to my favorites are returned to what they were before, I changed them?

  Try the solutions in Impossible to add, edit, or save bookmarks - how to fix

• Startup MacBook Pro-comment problems prevent health going to disk/check once again

  My 13 inch Macbook Pro running OSX 10.9.5 (said mid-2012, but it was purchased in fall 2014) has had problems starting

  A few weeks ago the computer is stuck on the loading screen (white, with the Apple and the buffering of spinning icon) without marketing properly. After you have manually turned off and left for a long time he worked well on the next test, so I took care of it has been saved and so didn't think much, and it works pretty well in recent weeks, sometimes being a little slow but that very occasionally and not debilitatingly so and it probably is not related to this problem.

  This morning it was still once stuck on the loading screen, and try again in 5 or 6 times solves nothing. The VRAM reset did not help either. After an attempt to boot into safe mode (filled a little progress bar then disappeared and the computer continued to buffer without purpose), I once again reset the NVRAM and tried a different boot safe mode, with the same results. But this time I left it half an hour or so and on the next attempt (start normally) it miraculously worked a new and everything seems functional. After a new backup with a preparation period slightly extended backup (at least half an hour on the first abandoned attempt, then at least 15 minutes, until correct on the second trial has started), although it is common on my computer, I have enough fear turn the computer off and tempt fate again, if I want to see what can be done now.

  What should I do to check the health of the disk, potentially fix it, find out why this is happening and avoid this problem again in the future?

  I decided to watch from the disk utility and am confused by the Setup program. There is an 'APPLE HDD Media HTS541010A9E662' entry in the list, with a "MacIntoshHD" paragraph below, and both have different information displayed... I ran check disk on the higher level entry and it seems to be out very well ("the Volume Recovery HD seems to be OK"), but I haven't run one on the low level input as it says my computer may be "slow and unresponsive" while doing so, and I'm not entirely sure of what use there.

  It cannot be storage associated with as I stil have 610 gb of free 1 terra (although a large part of what I have (130 GB) is in the other category for a reason any).

  How to fix the slow down time and start. | MacTip.net

  Resolve startup issues and perform maintenance on disk with disk utility and fsck

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  Repair the hard drive and permissions - Yosemite, Mavericks, Cougar or Lion

  HD recovery start:

  Restart the computer after the ring, press in and hold the ORDER et R keys until the menu screen to appear.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab, and then click the repair disk button. If disk utility reports any errors that have been corrected, then again run repair disc until no errors are reported. If no errors are reported, click repair permissions . Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Ways to help make a slow Mac faster

  17 reasons why your Mac runs slower than expected

  Slow performance of Mac? This Article addresses!

  Difficulty of slow start in OS X | MacFixIt - CNET Reviews

  How to fix the slow down time and start. | MacTip.net

  6 easy tips to speed up OS X Yosemite on your Mac.

  Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

  Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

  Before Mavericks

  Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  Mavericks and later versions

  Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

  The ultimate solution

  Back up everything, wipe the drive, reinstall OS X and restore your data from backup. Reinstall the third-party software of original/zero media.

  Start the computer in Safe Mode, and then restart normally. It will be slower than a normal startup.

  MacIntel: Reset of the controller (SMC) system management

  Reset the PRAM and NVRAM on your Mac.

  Now, download and install the update of OS X Mavericks 10.9.5 (Combo)

• Mail is stuck in a loop, force quit/restart it closes, and then when I opened the Mail once again, the cycle starts over.

  I am El Capitan OS X 10.11.3, Mail is stuck in a loop, I was responding to a message, and I tried to send it. Now, he presents this message, and then switch to another message / desktop /, mail inbox home screen, then the loops again.   Force quit and restart it closes, then when I open the Mail once again, the cycle starts over.

  I can't use the mail app at all.

  Open the menu go with down option - Open Library - containers and move the folder "com.apple.mail" on the desktop.

  Restart your Mac and check if it works very well.

• My desktop picture won't stay as I put it. When I turn on my computer once again, it's a different picture. No one else has access to my computer, ever.

  My desktop picture won't stay as I put it. When I turn on my computer once again, it's a different picture. No one else has access to my computer, ever. Any ideas what's happening?

  Make sure you change the image is not checked...

  

  

• This (software) reader can handle a wide range of video formats

  I need locate a video file viewer that can handle a wide range of formats high definition (HD).

  • My VIXIA M400 MOV files,
  • My T2i MTS files,
  • My grandson uses files from an underwater camera cheap Coleman, MOV
  • The M2TS files are conversions of the Coleman camera MOV files, and
  • MOV files that a friend took on her camera NIkon underwater, AW100.

  Over time, there may be other/other video formats, but for the moment a viewer who can see all of these movies would be great.

  All the these are HD files.  AVCHD, I think.  All are captured on SD or SDHC or micro-SD cards.

  I don't want software that "imports" SD cards to the computer files.  I'm not editing software.  I don't want to not cataloging software.  I want just a simple software which will see the files a wide range of HD (and I do not whether I'm a posting in HD).  When I saw them and decided to use (and not use), I'll then work importing and editing using the video editing software enough high-end I own.  But first of all, I would like to just see what I captured.

  I looked and looked without success.  Frankly one of the most difficult files for me to see types are MOV files that come from the VIXIA.

  Somehow, I don't think it should be as difficult as it seems to be.

  erisajd

  Okay, I could have answered my own Q.

  ArcSoft is 'VideoConverter 8' software that does a good job taking all sorts of file formats and transform them into other formats (especially useful for iPod, iPhone, Facebook, YouTube and similar items).

  This software sells for about $30 and to view the files that are about to be converted.  I guess the idea is that if you don't like what you see, you do not convert.

  In any case, it seems to manage all file formats I mentioned.  So I guess I found my own answer.  Wasn't easy, but I found it.

  erisajd

• Photosmart B110: Problem with B110: order print wirelessly (once again!  :-()

  Hi all

  A few weeks ago, I've been here for more help (see: http://h30434.www3.hp.com/t5/Printer-Software-and-Drivers/B110-doesn-t-print-wireless-anymore-after-... )

  Then, after you apply the advice of sabretooth04 (manually in the WAP code on the LCD of the printer, it worked perfectly... until :-(a few days ago)

  Although nothing has changed: no new software, no change of position... nothing!

  Then I restarted the router, then the printer and the laptop; Once again put in the WAP code... but it does not help :-(

  The printer is doing well: all the test pages out big, like the wireless network test page.

  Please, I really need help (again)

  Greetings from the Netherlands,

  Sigrid

  P.S., as wireless worked from day one, I never used the cable and now I can not find. So for the moment I have no alternative wireless...

  Hello

  Thank you for using the forum.  You can try the following:

  Please download and run the HP Print and Scan Doctor (PSDR) tool to diagnose and solve your problem

  http://h20180.www2.HP.com/apps/NAV?h_pagetype=s-926&h_lang=en&h_client=s-h-E016-1&h_keyword=DG-PDU

  Hope that helps.

• I click analyize it is said you should defragment this volume then I run imediatlly once again and he said that I should defragment. Once again

  Original title: Disk Defragmenter

  I click analyize it is said you should defragment this volume then I run imediatlly once again and he said that I should defragment. again, I have windows Xp IE8 and Ms s essentials do it please answer very clear, I'm not very good with computers, I'm an old guy, thank you.

  Hi RichSQL,

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Relocation of defragmentation

  (a) in the disk, find the directory c:\Windows\Inf. If the system directory is not on the c: drive or not named Windows, find by clicking on "Start", then "run" and type %Windir%\Inf in the area.

  (b) find the file called dfrg.inf.

  (c) right click on the file and select "install".

  Step 2: Repair defrag

  un) Click on "Start", then "run", run this command: regsvr32 dfrgsnap.dll.

  (b) click "Start", then "run" and execute this command: regsvr32 dfrgui.dll.

  (c) run Defrag.

  Method 2: Follow the steps in the article.

  Disk Defragmenter does not work on a Windows XP-based computer

  http://support.Microsoft.com/kb/922379