WiFi detected but cannot connect

Similar Questions

• Satellite A200-09V - card Wifi detected but never connected

  Hi all!

  First of all, sorry for my English... so be cool with me!

  I have a Toshiba Satellite A200-09V so I change my router to a DLink with 802.11n. So I buy an internal wireless card but the card is correctly detected, but never whant to be 'connected '.

  The original card inside is an Intel 3945ABG.
  When I turn on my laptop, on the front of my laptop, I have a little orange light with a switch to cut the card.

  The card I buy is an Intel WiFi Link 5100 ABGN. But light, wathever I change the switch ON of OFF, again and always off the coast. Windows detects the card correctly and I install the right driver for intel, and in my equipment manager, the card is in the network card.

  But the map never want to get "online"... I can turn the card but I can not connect (so I do not see the wireless near me).

  I have the latest bios and driver... but it's like the laptop never 'talk' to the card and by the way, don't get pass the signal.

  But why XP detects the card but not get cards online? If the card was bundles, XP will never be able to "detect" the card and if XP correctly detects the card, it's as if the card is compatible with the motherboard? Isn't it?

  Thank you for helping be and I give you all the information you want...

  The network without WIRE Intel 3945ABG card only does support A, B or G standard and your router has N.

  So, you need to set the router to G standard or perhaps, you set up the router again to this standard and without security settings. It's the best way I think, and if it works, you can enable encryption and the security features more.

• strong wifi signal, but cannot connect to the internet

  I have a strong wifi signal, but I can't connect to the internet continues the smartphone and smart tv... help! We pay high speed internet but can not use it.

  Thank you

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you have trouble connecting to the WiFi in Windows 7. We'll help you probably with the same.

  1. What happens while you are trying to connect to the internet with the Wi - Fi network?
  2. You are able to connect to internet while, you use a wired connection?

  You can try to follow the following suggestions to solve the problem.

  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  I suggest you to consult the help articles and check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks (Also applies to Windows 7)

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

  I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you come.

• Satellite M300-D4316 - wireless network detected but cannot connect

  Previously, I could use LAN wireless on my laptop but last week because I signed up to a bluetooth connection, Wi - Fi connection no longer works.
  It can even detect a wireless network around me; I don't see every time when I try to connect, & it asks me to diagnose the problem & said something like "the signal is too weak.

  I'm sure that is not the problem of wireless service - all my friends can connect to him!

  What should I do?

  Maybe the wireless LAN tipped off?

  Try to press Fn + F8 to toggle wireless devices.

  Also make sure that the wireless switch is turned on in the front and the sides of the laptop.

• established - VPN connection, but cannot connect to the server?

  vpn connection AnyConnect is implemented - but cannot connect to the server? The server IP is 192.168.0.4

  Thank you

  ASA Version 8.2 (1)

  !

  hostname ciscoasa5505

  names of

  !

  interface Vlan1

  nameif inside

  security-level 100

  IP 192.168.0.3 255.255.255.0

  !

  interface Vlan2

  nameif outside

  security-level 0

  IP 208.0.0.162 255.255.255.248

  !

  interface Vlan5

  Shutdown

  prior to interface Vlan1

  nameif dmz

  security-level 50

  IP address dhcp setroute

  !

  interface Ethernet0/0

  switchport access vlan 2

  !

  interface Ethernet0/1

  !

  interface Ethernet0/2

  !

  interface Ethernet0/3

  !

  interface Ethernet0/4

  !

  interface Ethernet0/5

  !

  interface Ethernet0/6

  !

  interface Ethernet0/7

  !

  passive FTP mode

  clock timezone PST - 8

  clock summer-time recurring PDT

  DNS lookup field inside

  DNS server-group DefaultDNS

  192.168.0.4 server name

  Server name 208.0.0.11

  permit same-security-traffic intra-interface

  object-group Protocol TCPUDP

  object-protocol udp

  object-tcp protocol

  object-group service TS-780-tcp - udp

  port-object eq 780

  object-group service Graphon tcp - udp

  port-object eq 491

  Allworx-2088 udp service object-group

  port-object eq 2088

  object-group service allworx-15000 udp

  15000 15511 object-port Beach

  object-group service udp allworx-2088

  port-object eq 2088

  object-group service allworx-5060 udp

  port-object eq sip

  object-group service allworx-8081 tcp

  EQ port 8081 object

  object-group service web-allworx tcp

  EQ object of port 8080

  allworx udp service object-group

  16001 16010 object-port Beach

  object-group service allworx-udp

  object-port range 16384-16393

  object-group service remote tcp - udp

  port-object eq 779

  object-group service billing1 tcp - udp

  EQ object of port 8080

  object-group service billing-1521 tcp - udp

  port-object eq 1521

  object-group service billing-6233 tcp - udp

  6233 6234 object-port Beach

  object-group service billing2-3389 tcp - udp

  EQ port 3389 object

  object-group service olivia-3389 tcp - udp

  EQ port 3389 object

  object-group service olivia-777-tcp - udp

  port-object eq 777

  netgroup group of objects

  network-object host 192.168.0.15

  network-object host 192.168.0.4

  object-group service allworx1 tcp - udp

  8080 description

  EQ object of port 8080

  allworx_15000 udp service object-group

  15000 15511 object-port Beach

  allworx_16384 udp service object-group

  object-port range 16384-16393

  DM_INLINE_UDP_1 udp service object-group

  purpose of group allworx_16384

  object-port range 16384 16403

  object-group service allworx-5061 udp

  range of object-port 5061 5062

  object-group service ananit tcp - udp

  port-object eq 880

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-6233

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing-1521

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing2-3389

  outside_access_in list extended access permit tcp any host 208.0.0.164 eq https

  outside_access_in list extended access permit tcp any host 208.0.0.164 eq www

  outside_access_in list extended access permit tcp any host 208.0.0.164 eq ftp

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.164 object-group billing1

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 EQ field

  outside_access_in list extended access permit tcp any host 208.0.0.162 eq www

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 remote object-group

  outside_access_in list extended access permit tcp any host 208.0.0.162 eq smtp

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 object-group olivia-777

  outside_access_in list extended access permit udp any host 208.0.0.162 - group Allworx-2088 idle object

  outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5060

  outside_access_in list extended access permit tcp any host 208.0.0.162 object-group web-allworx inactive

  outside_access_in list extended access permit tcp any host 208.0.0.162 object-group inactive allworx-8081

  outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-15000

  outside_access_in list extended access permit udp any host 208.0.0.162 DM_INLINE_UDP_1 idle object-group

  outside_access_in list extended access permit udp any host 208.0.0.162 object-group inactive allworx-5061

  outside_access_in list extended access allowed object-group TCPUDP any host 208.0.0.162 inactive ananit object-group

  outside_access_in list extended access deny ip host 151.1.68.194 208.0.0.164

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0

  permit access ip 192.168.0.0 scope list outside_20_cryptomap 255.255.255.0 172.16.0.0 255.255.0.0

  Ping list extended access permit icmp any any echo response

  inside_access_in of access allowed any ip an extended list

  permit access ip 192.168.0.0 scope list outside_cryptomap 255.255.255.0 192.168.1.0 255.255.255.0

  access-list 1 standard allow 192.168.0.0 255.255.255.0

  pager lines 24

  Enable logging

  logging buffered stored notifications

  asdm of logging of information

  Within 1500 MTU

  Outside 1500 MTU

  MTU 1500 dmz

  IP local pool 192.168.100.30 - 192.168.100.60 mask 255.255.255.0 remote_pool

  192.168.0.20 mask - distance local pool 255.255.255.0 IP 192.168.0.50

  ICMP unreachable rate-limit 1 burst-size 1

  don't allow no asdm history

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) 0-list of access inside_nat0_outbound

  NAT (inside) 1 0.0.0.0 0.0.0.0

  NAT (outside) 1 192.168.0.0 255.255.255.0

  alias (inside) 192.168.0.4 99.63.129.65 255.255.255.255

  public static tcp (indoor, outdoor) interface 192.168.0.4 smtp smtp netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface field 192.168.0.4 netmask 255.255.255.255 area

  public static tcp (indoor, outdoor) interface 192.168.0.4 www www netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 777 192.168.0.15 777 netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 779 192.168.0.4 779 netmask 255.255.255.255

  public static (inside, outside) udp interface field 192.168.0.4 netmask 255.255.255.255 area

  public static tcp (indoor, outdoor) interface 880 192.168.0.16 880 netmask 255.255.255.255

  static (inside, outside) 208.0.0.164 tcp 3389 192.168.0.185 3389 netmask 255.255.255.255

  inside_access_in access to the interface inside group

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 208.0.0.161 1

  Route inside 192.168.50.0 255.255.255.0 192.168.0.1 1

  Timeout xlate 03:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02

  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00

  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00

  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute

  timeout tcp-proxy-reassembly 0:01:00

  dynamic-access-policy-registration DfltAccessPolicy

  Enable http server

  http 192.168.0.0 255.255.255.0 inside

  http 192.168.0.3 255.255.255.255 inside

  No snmp server location

  No snmp Server contact

  Server enable SNMP traps snmp authentication linkup, linkdown cold start

  Sysopt noproxyarp inside

  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac

  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac

  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac

  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac

  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac

  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac

  life crypto ipsec security association seconds 28800

  Crypto ipsec kilobytes of life - safety 4608000 association

  card crypto outside_map 1 match address outside_cryptomap

  card crypto outside_map 1 set pfs

  peer set card crypto outside_map 1 108.0.0.97

  card crypto outside_map 1 set of transformation-ESP-3DES-SHA

  card crypto outside_map 20 match address outside_20_cryptomap

  card crypto outside_map 20 set pfs

  peer set card crypto outside_map 20 69.0.0.54

  outside_map crypto 20 card value transform-set ESP-3DES-SHA

  outside_map interface card crypto outside

  crypto ISAKMP allow outside

  crypto ISAKMP policy 5

  preshared authentication

  3des encryption

  sha hash

  Group 2

  life no

  crypto ISAKMP policy 30

  preshared authentication

  3des encryption

  sha hash

  Group 1

  life no

  Telnet timeout 5

  SSH timeout 5

  Console timeout 0

  identifying client DHCP-client interface dmz

  dhcpd outside auto_config

  !

  dhcpd address 192.168.0.20 - 192.168.0.50 inside

  dhcpd dns 192.168.0.4 208.0.0.11 interface inside

  dhcpd allow inside

  !

  a basic threat threat detection

  Statistics-list of access threat detection

  no statistical threat detection tcp-interception

  WebVPN

  allow outside

  SVC disk0:/anyconnect-win-2.5.2014-k9.pkg 1 image

  enable SVC

  tunnel-group-list activate

  attributes of Group Policy DfltGrpPolicy

  internal group anyconnect strategy

  attributes of the strategy group anyconnect

  VPN-tunnel-Protocol svc webvpn

  WebVPN

  list of URLS no

  SVC request enable

  encrypted olivia Zta1M8bCsJst9NAs password username

  username of graciela CdnZ0hm9o72q6Ddj encrypted password

  tunnel-group 69.0.0.54 type ipsec-l2l

  IPSec-attributes tunnel-group 69.0.0.54

  pre-shared-key *.

  tunnel-group 108.0.0.97 type ipsec-l2l

  IPSec-attributes tunnel-group 108.0.0.97

  pre-shared-key *.

  tunnel-group anyconnect type remote access

  tunnel-group anyconnect General attributes

  remote address pool

  strategy-group-by default anyconnect

  tunnel-group anyconnect webvpn-attributes

  Group-alias anyconnect enable

  !

  Global class-card class

  match default-inspection-traffic

  !

  !

  World-Policy policy-map

  Global category

  inspect the icmp

  !

  service-policy-international policy global

  : end

  ASDM location 208.0.0.164 255.255.255.255 inside

  ASDM location 192.168.0.15 255.255.255.255 inside

  ASDM location 192.168.50.0 255.255.255.0 inside

  ASDM location 192.168.1.0 255.255.255.0 inside

  don't allow no asdm history

  Right now your nat 0 (NAT exemption) follows the access list:

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 172.16.0.0 255.255.0.0

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.1.0 255.255.255.0

  Traffic back from your server to 192.168.0.4 in the pool of VPN (192.168.0.20 - 50) not correspond to this access list and thus be NATted. The TCP connection will not develop due to the failure of the Reverse Path Forwarding (RPF) - traffic is asymmetric NATted.

  Then try to add an entry to the list of access as:

  permit access ip 192.168.0.0 scope list inside_nat0_outbound 255.255.255.0 192.168.0.0 255.255.255.0

  It's a bit paradoxical but necessary that your VPN pool is cut out in your interior space network. You could also do like André offers below and use a separate network, but you would still have to add an access list entry to exempt outgoing NAT traffic.

• I changed my password but cannot connect. When I reset the password they send an e-mail to my other email account, but there is no text tell me how to change

  I changed my password but cannot connect. When I reset the password they send an e-mail to my other email account, but there is no text tell me how to change it. He repeats to me just 'loading '.

  frustrating

  If you are referring to a Windows Live account, you can get help here: http://www.windowslivehelp.com

• I can see the shared folder on the #2 computer but cannot connect.

  I can see the shared folder on computer 2 but unable to connect. It is said "see... administrator permissions. When I go to the computer and creat a hand 1, I can see on the 2nd computer but cannot connect. I can connect to the shared printer on one 1 computer file.

  When # 1 I can connect to #2 and open shared files (just like its supposed to!)

  I have checked the basics, (I can connect to the Printers folder) file sharing.

  Help, please. Both computers have a freash install WIN XP and have been updated to SP3 current peer-to-peer network, firewall is down, Microsoft Security on both

  Hello

  Run on the supercomputer network configuration wizard.  If this doesn't fix the problem:

  1. download and install the Tools of the Windows 2003 Server Resource Kit .

  2. click on Start > all programs > Windows Resource Kit Tools > Shell .

  3. type these lines at the command prompt, exactly as shown:

  NET user guest/active: Yes
  NTRights + r SeNetworkLogonRight u comments
  NTRights - r SeDenyNetworkLogonRight u comments

  Kind regards
  Chauvet J.

• Windows cannot access \\RIPSERVER. You are not allowed to access \\RIPSERVER... I can see the \\RIPSERVER on my network but cannot connect.

  Windows cannot \\RIPSERVERaccrss. You are not allowed to access\\RIPSERVER... I can see the\\RIPSERVER on my network but cannot connect. I'm running with 3 computers XP Pro windows SBS 2003 domain and a Windows 2000 (\\RIPSERVER) runs a computer to plate system that I use every day. I just added a new computer Windows 7 Professional and can see everything on the network (domain), I can access the server drives (where we keep the file sbs 2003), but when I click on the\\RIPSERVER I get error (cannot access...) If I do the same with any of the XP computers that he connects very well. Please help as I cannot connect I have to make my new computer an XP and I wanted to start to learn the Windows 7 operating system. Please let me know if you need more information on my systems.

  Thanks in advance for your help.

  Hi RC383,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum.

  Link, please refer to:http://social.technet.microsoft.com/Forums/en/itproxpsp/threads

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• HP8500 A909A, the installation program recognizes printer, but cannot connect

  HP8500 A909A, the installation program recognizes printer, but cannot connect

  Ok.

  It is installed by USB on the other printer?

  Did you share the printer?

  have you set up a virtual usb port?

  Have you tried to use the diagnosis of HP printer installation utility to help Setup and configuration of your printer?

  It would have been simpler to use the LAN connector so the other PC online would not be a condition for its availability.

  (1) connect the printer with the LAN connector to your network switch or router and turn it on.

  (2) make sure that the IP address of the printer is your network subnet via the embedded Web server or printer print Panel menu.

  (3) set it up as a network on all PCs compuuter to make it available for use

• Tecra A2 - connected to the WIFI router, but cannot browse

  Hi and help!

  I have a Tecra A2 and using the huawei HG520b router, I have a connection ok, but cannot navigate. Been in contact with my provider, had 2 hours of help and they say it's a problem with my laptop.

  I've updated the driver WLAN and now am losing to live... any suggestions would be great. Thank you

  Hello

  Did you check if your router has an Internet connection? If your router doesn't have a connection, you are not able to navigate through the Internet.
  Check this box!

  In addition, it would be interesting to know what browser you use. You can test another like Firefox or Opera?

• Excellent signal, but cannot connect to the wireless network

  XP Pro Client has been connected to the area by cable network, but now we need to connect in wireless. Card of TrendNet USB Wireless-N, no problems. The light is on the card, and the network is visible with a signal strong. When I try to connect, I get the message that it cannot connect, and the network may be out of reach. Sometimes, I get a balloon indicating that one or several wireless networks have been detected, but when I then try to connect, I get the same message. The PC is about 10 feet below the access point, with only a counter between the two. I have uninstalled, reinstalled, tried to update the driver, etc. Any help would be appreciated.

  Thanks for your help - problem was solved using the TrendNet utility to connect and add the key instead of using the Windows utility.

• installed Firefox depending on the instructions on the screen, but cannot connect. Have now added the new user name. How to complete the installation?

  I can't connect or open Firefox. Uploaded by on screen instructions but still cannot connect or use firefox.

  Installation of Firefox is not dependent on the signing in. You don't need a username / password for Firefox.

  Please explain what works and what's not more in detail.

• Satellite A505 - sees, but cannot connect to, Wireless Router Win7

  I have a laptop Toshiba A505-S6980 running the 64 bit version of Windows 7.

  It worked fine a few months previously, to connect wireless to my O2 2 wireless router (the notebook has a REALTEK RTL8191SE wireless card).

  I also have a desktop running XP computer that I use to connect to the same router. While on the desktop, I noticed several weeks ago that the router has been implemented with no WPA and WEP security, so I decided to change the router to WPA. The desktop PC was fine with this, but the laptop complained and wouldn't connect, failure of authentication and just stating "unable to connect to xxxxx". At the time I assumed it just couldn't handle the WPA authentication for some reason any and decided that I would probably turn to WEP to a later date to make it work again. At some point, I remove a ' O2 Connection Manager ", which had been installed when I bought a 3G dongle O2, where he has confused the issue, but it made no difference. In the meantime, I tried to connect the laptop using a wired connection and worked well.

  I now (a few weeks later) decided that I wanted to use the wireless laptop then redefine the router to WEP expect this to work, but it didn't. As with WPA, he did not get past authentication when I put the key to security in. So, I try to understand the problem...

  What happens;

  (1) the wireless laptop sees my router (and neighbors), but just cannot connect.

  (2) I can connect with a laptop computer on the same USB wireless adapter.

  (3) I can connect the laptop to the router using a wired connection, and there is no problem.

  (4) my desktop running XP computer can connect to the router as WEP or WPA Wireless if the router is ok.

  (5) this worked several weeks ago!

  What I've tried;

  (1) I have installed the latest REALTEK RTK8191SE driver.

  (2) I tried to disable the security on the router, no joy.

  (3) I deleted all the profiles of network on the laptop.

  (4) I have tried with Norton antivirus and firewall disabled (but have not uninstalled) but no help.

  (5) I tried to do a restore of the system to the closest possible point and no help.

  (5) I uninstalled the wireless network adapter and its driver in Device Manager... Windows 7 can see the of it after a reboot and re - installed (using the old default driver), but it does not work. Then, I re-installed the latest version from REALTEK to ensure that it is up-to-date.

  What's weird is that

  (1) it works ok using the wireless USB adapter

  (2) the integrated REALTEK wireless adapter works to a point such that it can SEE my router, connect simply do not

  (3) authentication failure almost instantly

  My suspicions are that an automatic update of Windows 7 or the O2 Connection Manager has somehow screwed it upward. I have uninstalled the O2 connection manager and tried to uninstall the automatic updates but there are many of them and I don't know how far back, I need to go. Also, because it authentication immediately, it seems that it is not giving him a chance to actually work.

  Does anyone have any ideas on how I can proceed or had a similar problem?

  This is a really silly situation. In any case, I recommend you to use the Toshiba WLAN drivers only.
  I put t know what Realtek module is inside but try please install driver WLAN http://aps2.toshiba-tro.de/wlan/?page=downloads

  All that you have done is logic and I think I will try the same thing.
  Have you tried to connect to WEP or WPA is disabled? I mean free WLAN without protection.
  Have you tried to connect your laptop to a friend's router?

  I really put t know what is the problem here but there are a few bad setting it.

• HP Envy 4500: Printer says it has solid network connection, but cannot connect to the internet

  So I have not been able to use my printer wireless lately, so I decided to check if it was connected to my wireless network. It is; I checked, re-connected and checked several times. So I decided to reactivate my web services. I have them turned off, and now whenever I press the button on the printer ePrint, it says connection for a really long time and then displays the message in the sense of "the printer cannot connect to the server. Check the internet connection and proxy settings.

  I have re-connected the printer to my wireless network, I checked that if I use a proxy server (I'm not), I used the HP print and Scan Doctor - just, it won't just matter what I do.

  All I can think about is the fact that I have recently purchsed a new router, but says that its connected which is what really stem me.

  This printer makes me crazy - please help

  Hi @mastersword64,

  Welcome to the HP community!

  I hope you have a pleasant experience with us.

  I want to help you with the connection error, you get on your e-all-in-one of HP ENVY 4500 printer when you try to enable web services.

  Here are some steps, I suggest trying to get your web services up and running it again:

  Network Power Reset:

  We'll leave the router and unplug the power cable (NOTE: do not reset the router.), and then do the same with the printer and shut down the computer. After a minute, plug in the router, wait to fully turn on, then plug the printer back in and wait for the wireless light become solid. Once the router and the printer are on, go ahead and re - turn on the computer. This will refresh the network connection.

  Restore the default settings of the network and reconnect:

  1. on the front panel of the printer, press your up wireless icon

  2. Select settings.

  3. Select restore default network settings.

  4 turn on your printer.

  5. once it is initialized to save, press the wireless icon again.

  6. Select settings.

  7. Select Wireless Assistant , and then follow the prompts to enter the details of your wireless network.

  8. try to activate the web services again.

  Configure a manual DNS for your printer:

  1 obtain the IP address of your printer

  a. This can be done by pressing the icon on the printer wireless.

  2. Enter the printer's IP address in a browser on your computer.

  3. Select the tab network at the top of the page.

  4. on the left, select network.

  5. Select network address (IP)

  6. Select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  7. Select apply. You can get a warning simply select OK.

  Please reply to let me know if these steps resolve your issue.

  Good luck!

  

• iPod has been detected but cannot be identified correctly-HELP

  So, less than a month ago I bought an iPod nano 7th generation and when I bought it, it was fine and I downloaded all my music on it. Tonight I went to add the music more and I get the following error message - "an iPod has been detected but could not be identified properly. Please disconnect and reconnect the iPod and then try again. »

  I tried the following:

  -Plug the machine again and I tried all the USB ports.

  -Restart of my PC

  -Uninstall and reinstall every product Apple on my PC

  -Go to the Device Manager and of the driver updates

  -Go to C: / > Program Files > common files > Apple > Mobile Device Support > drivers > usbaapl64 > install

  All in vain-_-

  I am running Windows 64-bit 10.

  Any help is really appreciated, thanks in advance

  Uninstalling and reinstalling each Apple on my PC product

  Try to do this again, the procedure described in this document of Apple.  It lists all the components of an installation of iTunes and the precise order to uninstall, and measures to confirm everything was deleted

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Then, download and reinstall the latest version of iTunes

  https://www.Apple.com/iTunes/