WiFi guard give up the connection on Inspiron 11 3000

Similar Questions

• RALink rt5390r wireless guard give up the connection

  I have the Office of CTO H8-1540 8.1 Windows running.  This machince has been bundled with Windows 8 and I experienced the same behavior on the two OS'.  I have no problem getting a connection, but I can't keep the connection.  I have a RT5390R of RALINK 802.11bgn card with the version of the driver from 5.00.37.000.

  This machine and master connects to an Actiontec MI424WR Rev I have router.  On a wired connection, I get 75Mo down and 37MB upwards.  The wireless connection is only 44.5 MB donw and 38.7 upward.  Troubleshooting of Windows usually fixes the problem if I'm on the PC.  The connection failed twice when entering this question on the Web site.  I would also add that I have 2 other laptops HP, who do not have this problem.  I have also 3 Android devices and 2 Apple products that do not have questions to stay connected.

  HP has replaced the RT5390R wireless card in my destop and returned the PC yesterday; 4 June 2014.  The PC has been on my local network 24 hours at this point, which would be longer that I never saw him standing in the past of 23.5 hours.  I am considering whether the resolution.

  For those past the warranty, I would suggest adding a product of reliable wireless alternative to replace the RT5390R.  If your PC is still under warranty, contact HP before the expiration of the warranty.

• WNR3500 guard give up the connection in California

  OK, I called TWC cause I keep losing my connection to the net, I have a router WNR3500 w / the latest firmware, I can't find anything more recent, I use Netgear for years, said TWC this only affects those whose routers Netgear in California, I run cable Cat6 and have a 1 Gigabit connection, my modem is a Motorola SB6121 Docsis 3.0 modem and my connection is 20/2. NETGEAR is working on a fix?

  The abandonment of the connection, they told me applies to all routers Netgear to California on the TWC system...

  OK I think this can be marked as resolved, I had a tech call me BC, he crossed the router and I settled on changing the settings DNS to Open DNS for the primary (208.67.222.220) and Google for the scondary (8.8.8.8), almost 2 hours have passed and I think it's a success, no new firmware is required , is for a good all in a new router, probably not before that let's go, I'm sure this will be my last post in this thread.

• Server to the House Acer Aspire H341 guard give up the connection and I can't access the files.

  The server worked flawlessly for 2 years.  Now it the intermittent connection.  When I try to back up a computer on the server it the backup starts but stalls and I get an error message saying that there was a problem with the software of server connection.  I reinstalled the software of connection to server with no improvement.  Restart the server generally means I can access the files again, but it will still drop the connection.  The same problem occurs on all five connected computers.  All running Windows 7 family 64 or Windows XP.  I did have a backup successful PC in two months. I am desperate for help.  Had the server in the computer store and they could not in the absence of it.  They had to install the software of my original disks, so I wonder if it's an automatic update (including the computer store would not, by returning to the original disks).  Everyone suffers from the same issue?

  Unfortunately he wa a sign of a failure of network card.  As it was an integral part of the unit, replacement was more expensive than the original server.  So I bought a new server.  He has managed to move the hard drives on the new server.

• WRT160Nv2 guard give up the connection

  I've been running this router for about 6 months now, and now the problem becomes unbearable. I installed LELA on all my computer last night finally and I see when my connections drop it now. I can surf, all right, and I start to get page not found or not connected to the internet error.  I'm currently running 1 Wired, wireless 3, XBOX360 1.  The XBox NEVER drops connection, NEVER drop the CPU compared to Yahoo Instant Messenger and surfing capabilities let computers and page timeouts. Before installing LELA I had to unplug and reconnect the router every time that he did. Now the duty rate is about 4 to 6 times an hour. Then someone please help me, I'm totally lost. I went through the technical support of comcast already and they say that, because I can get on the game and messenger service that it is most likely router problems.

  There are several work around this problem, and I hope others after their solutions. I had exactly the same problem with my router and here's how I solved it;

  First of all, I downloaded a new version of the firmware, but it doesn't stall now. Secondly, I did a reset / / 30/30 30 router, here is the complete procedure

  1. connect the computer via a cable to the router cat - make sure that you can 'see' the router via a browser @192.168.1.1

  2. with the power to the router "on", press the button of reset for 30 seconds - do not stop pressing to go to step 3

  3. While pressing the reset button, unplug the power supply of routers, wait 30 seconds - you don't need to go to step 4

  4. While pressing the reset button, plug in the router to the power source, wait 30 seconds and release the reset button and wait for the router to return online

  5. access to the router through the web interface @ 192.168.1.1 - admin is the password (you probably know )

  6. install the new firmware (administration tab > firmware update)-if successful, you will see the reviews, if not repeat steps above.

  7. Repeat steps 1-5

  8 access to the new router via web interface to reconfigure your settings for your network and your ISP and leave all the others in mode by default - except one, on the configuration tab, change the Keep Alive: reminder from 30 seconds to 20 seconds time.

  Before you implement this, my router dropped the connection for laptops wireless several times a day, because I did this procedure, not only once!

• WNR3500 guard give up the connection

  Every 4 or 5 days my WNR3500L removes the internet connection and wifi connections.

  I run with the V1.2.2.48_35.0.55 firmware (latest).

  When I pass the power and the new router works again.

  Can someone give me some advice?

  Hi, it helped to downgrade the firmware version, as described above.

  I switch off the settings to install the latest firmware.

• My computer guard give up a connection to the network but the other computers in the House are connected

  My computer said at the outset that it is correctly connected to the network but then immediately lose the connection. Sometimes it will say that I limited the connection, but the strength of the network is always excellent. Computers are my roommates are working properly. Initially, he says that TataraTmp is the network of choice. I tried to delete this network that I am still unable to connect.

  Hello

  I guess that it is a wireless computer.
  ------------------------------------

  Maybe this can help.

  Assuming that the signal is strong, and that there is no noise in the electrical environment (http://www.ezlan.net/wbars.html ).

  Uncheck the box to the NIC of energy economy (I.e., do not leave the card save energy).

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------

  Still a problem?

  Check the support site for the manufacturer of the computer and make sure that you use the latest drivers.

  If the support site has a newer version of the drivers and installed current ask drivers the most up-to-date drivers use this method.

  Download the drivers and extract them to a folder of your choice.

  In Device Manager, right-click on the adapter.

  Click Update drivers and choose her browse my computer for drivers.

  Choose let me a list of choices, click on disk and point to the folder with the drivers.

• Disabled after the connection hardware Inspiron keyboard

  Bought mixed open-box Inspiron 11 3152 with 8.1 Win x 64 installed. Windows Update successfully installed 170 updated and rebooted several times, but now the following problem occurs repeatedly and consistently:

  After cold start or restart, I am able to use the physical keyboard to enter the password for the connection and press ENTER.  After this point, the physical keyboard is completely non-functional, while the keyboard touchpad and software will continue to work very well. In addition, even if the keys are not launch related functions or generate text characters in the search box or in Notepad, each button press causes sound response click on speaker, even if nothing else happens.

  I tried the following:

  1 keyboard status appears as unlocked and temporary Keyboard Unlock selection or never lock keyboard has no effect.

  2. press the button audible clicks of the speaker go silent when the screen is folded above 200 degrees and the touchpad is also disabled, which indicates that the sensor angle screen seems to work correctly.

  3. this same keyboard problem also happens when the safe boot mode.

  4. the keyboard seems to work normally within the BIOS Setup, or at least with limited keys you can use there as 4 arrow keys, Esc, F10, etc..

  5. the keyboard works as normally in the window command prompt BACK, but only when entered into the Advanced Boot Menu.

  6. I have updated BIOS 1.1.13 and other video update, network, wireless, fast setting, keyboard, touchpad, pilots etc of the Dell website but keyboard problem remains unchanged.

  7. I ran full SupportAssist Dell diagnostics passing and also diagnostics of iolo of third party.

  8. I checked the Windows event logs and found no relevant problems.

  9. I don't have external USB keyboard to try but may need to purchase an additional control.

  I'd appreciate any help to solve this or I'll have to return unit. Thank you.

  Chris

  Dell technical support via the live chat helped me solve this one as being a known issue with Windows:

  The solution is to go to the configuration of PC access, less "make it easier to use the keyboard" and uncheck the box in front of "Turn on filter keys", and then select OK and restart, problem solved!

• S50-B-12 q - WiFi adapter satellite abandons the connection

  The computer is a brand new Satellite S50-B-12 q.
  Everything seems to work outside the wireless card.

  When I first connect to my home network, it will have an internet connection for about 6 seconds, after which it changes status limited connectivity.

  The network uses WEP for security.
  Several other devices use without any problem.
  I tried everything I could think of:

  * Turning on computer power switch, reset of the card
  * Installation drivers new/rolling back drivers / different versions
  * Adapter enabled
  * Disabled the "allow the computer to turn off this device to save power".
  * Disconnection/reconnection to the network several times
  * netsh interface tcp set global autotuning = disabled / netsh interface tcp show global / netsh interface tcp set global autotuningl = normal
  Replacement of the windows 8, which comes with the computer with Windows 7 (same problem)
  * Troubleshooting with windows

  This is what it looks like when I ping:

  Ping google.com 173.194.32.39 with 32 bytes of data:
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 29ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 32ms TTL = 57
  Reply from 173.194.32.39: bytes = 32 time = 1075ms TTL = 57
  Request timed out.
  Request timed out.

  Basically, it works for like 6 seconds as mentioned previously, the ping increases a lot and then the connection is lost. Wired connection works perfectly.

  When I run diagnostics network integrated in windows 7, it shows the following:

  + * ProblΦmes trouvΘs: * +.
  The default gateway is not available/not fixed
  The connection between your access point, router, or modem cable, and the Internet is broken / detected

  I see that you have tried a lot of different solutions, but I put t see no workaround related to the WLan router.

  You said you are using WEP encryption.
  WEP is a very weak encryption standard. Usually its recommended to use WPA / WPA2 standard.
  I recommend you to reset the router back to factory settings WLan.
  Then test connectivity WLan using an open (unsecured) wireless LAN.
  But of course; This must be done only for testing purposes.

  You should also test different channels WLan (1-9). I guess that the Wlan router must contain settings too.

• Cisco Wireless router model WRT120N guard give up Internet connection

  My wireless router will work for 6-8 hours, and then remove the connection to the internet.   I switch the modem and the router several times to re-establish the connection.  I'm also using a Netgear Access Point.

  I use:

  Charter high-speed Internet

  Motorola Modem

  Model Cisco WRT120N router

  Parameters

  Mixed-mode

  Channel Auto width - 20 MHz or 40 MHz

  Security - Personal WPA2

  Disabled SSID broadcast

  Firmware Version v1.0.04

  Automatic connection Type - Conf DHCP

  Beacon interval - 50

  Fragmentation threshold 2304

  RTS threshold 2304

  All other settings are default.

  When I unplug the modem to the router and plug it on the desktop I have internet service.

  The connection is also falling only on wired or wireless?

  Try to update the firmware on your router.
  Connect to the computer with the Ethernet cable to the router.
  Download the latest firmware from the site Web of Linksys and save it to your computer. Open the router configuration page. Click the Administration tab and switch to the sub tab upgrade the Firmware through the firmware file that you have already downloaded and update on your router.
  After upgrading the firmware on the router, it is recommended that you must reset the router and reconfigure. Press and hold the reset button on the router for 30 seconds. Release the reset button and wait 10 seconds. Power cycle the router and reconfigure.

• Wusb300n w / WRT160Nv2 - unusable! Give up the connection again and again

  I spent at least 16 hours trying to get my to work with WRT160Nv2 WUSB300N

  firmware on router is v2.0 02 last, latest drivers: ftp://ftp.linksys.com/downloads/NA/drivers/WUSB300N_20071204_dr.zip

  I use windows zero Configuration tool.  wireless monitor not installed as it was unusable.

  I can connect to the AP perfectly, but no matter what time, I try to upload a large file, say more than 10 MB, it disconnects.

  It appears after a certain amount of data is transferred, whether by downloading a large file or not, it disconnects

  This product is totally unusable.

  I've tried everything

  Current settings:

  WPA psk / tkip

  mode: joint

  the standard 20 mhz band radio (only other option is automatic)

  broad channel: 3 (grey outside, I can't change that)

  standard channel: 11

  When I tried to put the 3 above options auto same problem

  evolution of the rts and fragmentation threshold threshold did not help

  network configuration: wireless access point is 10.191.191.253 acting as a switch, connect a switchport to the Firewall ASA 5505.  DHCP is granted to ASA and disabled dhcp a wireless access point.

  again, everything works well in terms of access to the internet but connection is to move after a certain amount of bytes sent =)

  Please advise...

  Thank you

  There must be a bug in WPA PSK personal... as soon as I switched to WPA Personal 2 all problems went away.

  Is this a known issue?

• WiFi guard move to limited connectivity

  Hi, I recently bought a new laptop from Windows 8 for me and since I got it, it keeps switching to limited random time connectivity, disconnect me everything I do is internet related. It makes it impossible for me to play games online, and he cuts every hour approximately. It is the only device in the House to have this problem, you guys have any suggestions?

  Hello

  Thank you for the update.

  Reset TCP/IP and check if it helps.

  a. press the Windows key + X, select ((Admin)) command prompt , and then press ENTER.

  b. at the command prompt, type the following command and press ENTER:

  netsh int ip reset c:\resetlog.txt

  Note: If you do not specify a path of the directory for the log file, use the following command:

  netsh int ip reset resetlog.txt

  c. restart the computer.

  It will be useful.

• I can't access wifi, please give me the name of the exact model of driver wifi

  
  

  Hello:

  This driver should work...

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 321957 & prodSeriesId = 5229455 & prodNameId = 5229457 & swEnvOID = 4059 & swLang = 13 & mode = 2 & taskId = 135 & swItem = ob-113862-1

• Remote Desktop connection abandons the connection permanently

  When I connect to my office with Remote Desktop constantly gives up the connection in a few minutes. I have Windows Vista. I heard there were problems with Vista and this program. Someone has the answer on how to fix this? I can connect with my Wired PC without any problem. Thank you!

  Hi Drifter5,

  Welcome to Windows Vista answers Forums!

  You can try the following steps and check if you can solve the problem.

  Here are a few possible causes of connection problems:

  The port of remote desktop can be blocked by a firewall.

  If you are using Windows Firewall, follow these steps:

  1. open the Windows Firewall by clicking the Start button, click Control Panel, clicking Security, and then clicking Windows Firewall.

  2. click allow a program through Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Select the Remote Desktop check box.

  If you are using another firewall, make sure that the port (usually port 3389) remote desktop is open.

  Remote connections might not be enabled on the remote computer. To resolve this problem:

  4. on the remote computer, click the Start button, right-click computerand then click Properties.

  5. in the left pane, click remote settings. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  6. under Remote Desktop, click allow the connection of computers running any version of remote desktop or allow the connection of computers running with NLA authentication remote desktop.

  7. click on OK.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/changing-remote-desktop-settings

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  If you use a wireless connection, then try to configure Windows to manage your network connections.

  For more information, you can consult the following link:

  http://TechNet.Microsoft.com/en-us/library/cc505913.aspx

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WUSB600N temporarily lose connection (do not drop the connection)

  Hi all! I had my WUSB600N for less then 1 year now, and I never really seemed to make it work properly. It tends to decide when he wants to work. Anywho...

  Here's the main problem I've had for the past month (which is even more annoying then the last). For some reason, then the adapter doesn't want to give up the connection to the network (most to least), he temporarily stop to do anything. I don't really know how to explain it other then when I surf the net, I can load a few pages fine and then all of a sudden, that none of them will load. They will stay there with a loading vacuum/progress bar and then eventually lead to an error page.

  My connection seem fine throughout the process according to the Windows Vista network and connection Center thing, usually within 3-5 bars (apparently these Visual data is not a very good estimate of connection those, however). That's what me stem. If my connection seems perfectly fine, why none of my pages would load and only temporarily? Sometimes, if I wate for about a minute and try again to load the pages, they work.

  I read somewhere that Vista has a system of offset in place or something that refreshes the connection or something in that sense every 60 seconds, so I gave Vista anti-Lag a go and it does not solve my problem either. I have the updated driver from Linksys for the card and thought to give it a go a last ditch effort, but hoped someone might know what is causing my problem of Rainlink.

  Here are the specs of PC:
  Windows Vista Edition Home Premium
  2.20 GHz AMD Phenom 9550 Quad-Core Processor
  5 GB of ram
  64 bit OS
  I use Firefox v3.5, but the same problem occurs in Internet Explorer (so I assumed the browsers can be removed from the equation).

  Also, I connect to the wireless network is sent to a D-ink Wireless N Router (DIR-615). I can not really change this but if this is the problem that I am a tenant of a House of friends.

  I hope someone can help out me! Any help would be greatly appreciated! If you need further information, technical specifications, etc., feel free to ask! Thank you!

  Just a quick update for everyone, I downloaded and used WLANOptimizer for the last 3 hours today and so far, it seems to have corrected my problem. I will post if this changes!

  If your experience of the same problem, I was and you are interested to try the program out, head to this page:

  http://www.Martin-Majowski.de/wlanoptimizer/downloads.php

  It's a small 755kb zip file, and the program itself uses an acceptable 8 632 k memory (Acceptable for me in this situation anyway!). As I said, your experience of the same problem, I've been if, please try this program and let me know if it will fix it for you so that we can see if this could a fix for some WUSB600N problems!