WiFi no longer works when the lid is closed

Similar Questions

• WiFi no longer works when the computer was unplugged

  We just got wifi via the border about two weeks ago. Initial configuration must be done with an Ethernet cable, but our jack is not in the computer room, it's in the living room, so we had to move our entire computer in the living room to set up. Well, once it has set me up we unplugged the power cord and the computer still worked on the wireless connection. We did not want to leave in the room forever so we unplugged and he returned to the computer room. Now, he does not connect to internet at all and says that we need an Ethernet cable. I want to know why it worked before wireless, but when we moved he stopped and how to fix it. Any help please?

  RCC

  You must contact the wonderful support of border.  They know only the correct settings.

  However, it may be a driver.  One way to check is to go into the Device Manager
  (départ > recherche > le gestionnaire de périphériques), then check the network device to see if there is an Ethernet device and a wifi device listed)

• Dv6 7000: charging does that when the lid is closed (sleep mode)

  I have a laptop HP DV6 7000. The battery doesn't work that when the lid is closed (sleep mode).

  If I close the lid and plug in the charger, the light indicates orange and the battery will deliver to load almost full.

  If I open the lid before the orange light changing to white, battery icon always says: _ % available (plugged in, does not support).

  Several different Chargers give identical results. EACH of them is fully charge the battery in two hours; as long as the cover is closed. If I open the lid, even to say 50% load, the orange light glows white and the battery icon always says: _ % available (plugged in, does not support).

  Thank you, Ed.

  Hi @ElyMayor

  Thank you for your response.

  The last thing I can suggest to try a restore to factory.  Performing a recovery of system HP (Windows 7)

  While the recovery, there is an option to backup your personal files. If you have not already done so, it is now a good time.

  Restore files that have been supported to the top using HP Recovery Manager (Windows 7)

  Alternatively, you can contact HP support for assistance. They can access your system remotely to help alleviate the difficulties.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

• Satellite U - Vista starts when the lid is closed

  Hello

  The title says it all!

  My girlfriend showed me her cell phone yesterday. She manually stop it on the start menu, leave for a few minutes, close the lid, then watches in joy as the computer laptop Springs revive again.

  I checked and the judgment indeed makes a stop, not a hibernation or something like that. I also changed the lid closed to "nothing" action and "stop" and I tried various methods to stop this strange behavior. My only solution was to have vista recognize the lid close like a stop action and have this control by turning off the laptop. Unfortunately, my girlfriend is a woman of routine and like to manually turn off the laptop before closing the lid, so my solution is not a long-term one.

  One thing that I've seen is that she had managed to install Uniblue Registry Booster. I quickly removed it, but wonder if it could have changed his behaviour of the laptop? Surely the fact if boots up when it is turned off when the lid is closed could not be attributed to Vista or whatever it is that was done for her?

  Thank you

  Chris

  Hello

  Can you please tell us what laptop you have exactly?

  I assume this has something to do with the alarm clock on the keyboard/LAN feature in the BIOS

• Black screen on Satellite A300D when the lid is closed

  When I close my Satellite A300D the monitor turns off, of course. But when I open it again the screen remains black. I can hear everything is working normally (Windows Vista 32 bit).

  Can someone help me?

  Johannes

  Hello

  As far as I know the laptop to stand mode when the lid is closed!
  Please check your settings in Vista power options and turn off the lid closing option.

  In addition, I would recommend updating the BIOS and the driver of graphics if a newer version is available on the European driver Toshiba page.

  Best regards

• Music app does not work when the screen is closed!

  Android6.0.1

  Compact Z5.

  When I listen to the music in the music of sony and closed the screen app, music will play a minute and stop, even when I turn the offshore endurance and add it to the white list, but it doesn't work.

  Other applications that can play music also encounter this problem. Some applications of music need wifi, they cannot work when the screen is too closed.

  What can I do about it?

  I think also ultra endurance disables many apps, so my guess is that you have a 3rd party app that close somehow your applications when the phone goes to sleep.

• I can do: sleep when the lid is closed, EXCEPT when an external display is connected?

  Hello

  Please let me know if this is possible. Seems to me like a current need, but I can't find a way to achieve this.

  I wish that the laptop to sleep when I close the lid (battery / plugged - matter), except when I have a connected external display.

  The script is very simple, I prefer to work with an external display, so I don't want or need the lid is open. When I'm on the road, the "sleep when the lid is closed" is a desired behavior.

  Is this possible?

  Thank you

  Roee.

  (1) this function is available in the Apple OS, but not in OS Win.

  (2) but, you can set a custom power plan to do this, so when you connect an external monitor just switch the power around plan. It is the easiest way to get what you want.

• Laptop will not go to sleep when the lid is closed

  Separated from this thread.

  Same problem here. My settings say that my Toshiba will sleep when the lid is closed, but half the time is not asleep and I can feel it's hot and turns on the fan. I am so frustrated with this new laptop and Windows 8.1. Looks like too many bugs in the software or something. More I am working on the new laptop the more problems that I find, like screen discoloration as well. The forums are useless. I do what they say, and the problem is the same. Forget the call from Toshiba. Needless. Nobody will help unless you pay them money to subscribe. What customer service?

  Hello

  Thanks for posting your concern here at the Microsoft Community forum. Let me help you with your concern.

  This problem may occur because of any change in power on your laptop options. If the default is set to hibernation and standby modes, your laptop goes to sleep when you close the lid, but then the Hibernate timer comes in and wake up your computer first and trying to Hibernate. He cannot go to Hibernate directly from mode 'sleep'. Go into the power settings and either disable hibernation or set the timer on a higher value.

  To apply the same setting to all plans:

  1. Open Power Options by pressing the Windows key + X, clicking Control Panel, click system and security, and then clicking Power Options.
  2. On the Select a power plan page, click choose the cover.
  3. On the page define power buttons and turn on password protection , next to when I close the lid, choose what you want your laptop to do, both when it is running on battery and when it's plugged in.
  4. Click on save changes.

  Tip: To save battery power and quickly resume working, select sleep. Sleep is a power saving state that allows a computer quickly resume the operation of full power (usually in seconds) when you want to start working again.

  To apply a setting to a specific regime:

  1. Open Power Options by pressing the Windows key + X, clicking Control Panel, click system and security, and then clicking Power Options.
  2. On the Select a power plan page, click change plan settings for the plan you want to change.
  3. On the change settings for the plan page, click change advanced power settings.
  4. Advanced settings tab, expand it cover and the Power button, action lid, choose what you want your mobile PC to do when you close the lid, for when it runs on battery and when it is plugged in, and then click OK.

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Inspiron 15R (5537) wake from its slumber when the lid is closed through the usb keyboard/mouse

  I have an Inspiron 15R (5537) which has all the latest drivers from Dell BIOS A01 Reference (Windows 8). I have the options of closing the lid set to "do nothing" for the two battery and plugged in, but no matter what I try, when the lid is closed I can't the laptop to wake up via USB keyboard or mouse.
  The keyboard and mouse have the wake-up option enabled in the settings of their material.  I also wake up from USB enabled in the BIOS.
  What is interesting, is that if I put the computer to sleep with the lid open, I can wake him up from the keyboard or the mouse.  But with the lid closed, the only way to wake up, it should open the cover and press the power button.
  Anyone know a solution to this?
  Summary:
  Cover open: CAN wake from USB keyboard/mouse.
  Cover closed: don't wake up if I open the lid and press the power button.

  Pete,

  Depending on where you live, you will have the rights of consumers.  I live in Australia and we have pretty good consumer protection.

  I asked Dell - repair, replace it with one that works, or pay back me.

  They went away for a few weeks, and when I "called home" a few times, they acknowledged that they could not solve the problem and offered me a full refund. The laptop was picked up yesterday and I expect the refund within about five days. The guy on my "case" has been very professional!

  I guess that you informed Dell FORMALLY of the problem via a support ticket?

  I did that and followed by chat and phone calls.

  Whist, the ability to wake up via USB is not explicitly described in any of their literature, the bios has available and W8.1 has the facility.  they built it all - EXCEPT that they forgot the lid...

  see you soon

• How to keep the macbook awake when the lid is closed?

  I want to keep my macbook awake even when the lid is closed. Free preferably.

  Use your Mac laptop to view closed with an external display - Apple Support

  http://Mac-how-to.WonderHowTo.com/how-to/keep-your-MacBook-awake-with-display-CL No.-0158152.

• NB250 makes scream sound when the lid is closed

  Hi all

  I am facing this problem with my laptop NB250.

  Steps to reproduce the problem
  i. internal microphone and speakers are enabled
  II. play some audio.
  III. close the lid while the audio is playing.
  IV. when the lid is closed (or even when she is brought very close to the keyboard) there is a loud noise.

  I went to the shop where I bought the laptop. The technician he said that this sound is done because the microphone is taken directly above the enclosure when the lid is closed.
  But I do not think that the sound must be made when the lid is closed.

  I should be grateful if the following queries are processed:
  i. This is a problem with only with NB250?
  II. is it a common problem with all laptops that have the speakers placed next to the touchpad, which brings the microphone from the speakers when the lid is closed?
  III. If there is a problem with my laptop, what should I do to repair/replace?

  Thank you
  Yogesh

  Hi mate

  I think you're talking about the sound looping between speaker <->microphone.
  I n t have this model laptop but I found an interesting How TO from Toshiba on similar topic. It addresses s L500 series.

  Check this box:
  + Hissing sound +.
  http://APS2.toshiba-tro.de/KB0/TSB0402UB0001R01.htm

  Disable the microphone volume in the speakers properties and this will help you get rid of these sounds.

• Speakers satellite Z830 - 10 M is turned off when the lid is closed

  Hello

  I'm running a Z830 - 10 M with an external monitor. I want to close the lid of the portable computer, but use the internal speakers, but when I close the lid, the speakers will cease to resound!

  How can I fix it?

  Thank you.

  I guess that your laptop goes into mode standby when the lid is closed.
  Right?

  In this case, you must set the option to choose what closing the lid does nothing to

  This can be found in the control panel-> Power Options-> in the left column

• How can I prevent the Satellite to sleep when the lid is closed?

  Hello

  I connected my Toshiba with an external HDMI monitor.
  The problem is that when I close the lid (I chose the monitors in dual options) instead of sending output to the screen external, portable sleeps.

  How can I stop the laptop to sleep when the lid is closed?

  Thank you for your time.

  Hello

  Go to control panel-> power options control
  Now on the left you will see the option called choose the closing cover

  Here you choose do nothing

  Concerning

• Microsoft Arc Mouse will stop when the lid is closed

  I have a samsung R505 running vista. Now, I chose to connect it to my TV with an HDMI cable. I would like to place the laptop in a cabinet under the TV and use my keyboard and mouse wireless Arc MS, but when I close the lid of the portable computer, the mouse freezes and jumps from one point to the other when he moves. This happens when the cover is open.

  I have configured windows not to sleep when the lid is closed and I checked and my mouse drivers are up to date.

  Any help on this would be appreciated. Please let me know if you would like more information on my put upward.

  Thank you
  Chris

  Hi Chris,

  You can uninstall the mouse and try to download the latest version of the software and the mouse drivers and check.

  You can read the following article and try Method 1 to uninstall the software.

  Troubleshoot installation of Intellipoint and IntelliType LifeCam software

  You may rfer to following article to download the latest version of the software and drivers.

  ARC mouse Software and Driver Downloads

• computer Vista laptop does not stop when the lid is closed

  I have all the correct power settings. mode when the lid is closed, I tried setting Hibernate and sleep. It just keeps running and running, I'm afraid it will overheat. but it should stop when the lid is closed, correct? Thank you sissy

  Hello banditpunpun2,

  Thanks for the return of the response.  I also go to your manufactures website and confirm you are updated with the lates drivers, updates the firmware and BIOS.  I even watch the forums on the manufacturer's Web site to see if others have experinced the same question.

  Please let us know status.