WiFi on/off button and indicator acute/severe problems in HP Pavilion dv8t-1000 CTO

Similar Questions

• HP Pavilion dv8t-1000 CTO: treble/bass indicator keeps popping up on

  Just moved HP Pavilion dv8t-1000 CTO and the treble/bass indicator keeps popping up with no set position - required bar increase or decrease. Very annoying. Any ideas?

  Thank you

  Jeff

  Hi all

  I sent the compuer back and detailed the litany of problems. He was returned about three weeks ago and worked fine. I didn't report again just in case something turned up. Also, I hope I have this jinx not to realize that everything is ok.

  The form returns with the laptop has enabled (reconfigured) hard drive, an extra box indicating the update of the BIOS and verified where keyboard technology has added 'Restraint' in the keyboard area. I suspect that it has something to do with the bass/trebl command.

  • No more noisy fan (when it turns cool it is very quiet).
  • No more wild and crazy popup Treble/Bass
  • Wireless begins to backup on the awakening from the sleep (one of the techs told me that the wireless was not supposed to return during the restart of sleep.)

  Later,.

  Jeff

• Z10 Z10 crahses Blackberry BlackBerry; does not turn off button, and struggles to access the hub

  I just got a new blackberry Z10. which I believe has been refurbishing My Vodafone provider.

  The blackberry is so bad that they actually sent me a knew phone and does not want this return of blackberry but I am frustrated by the latter.

  When receiveing the blackberry, I got the unlock code to unlock it, it worked perfectly.  Once unlocked, I entered my Vodafone SIM that didn't do not need to still use it with another sim card.

  First, I updated the blackberry for the last version of the software and complete the set up process.

  Then I restored my old data from my previous Blackberry Z10, which also does not (various issues)

  The phone blocks (blocks) and did different things; the screen freezes and does not even turn it off the button, I have to take the battery out to restart it, or I have to screen does not freeze, but you cannot access texts/emails or contacts and he says 'prepare the hub' but never really in it.

  Sometimes it will allow me to use the off button, but especially, I have to take the battery out and put back starting.

  It is possible to make a call sometimes, but he cuts during the call.

  I have reset the blackberry back to the factory settings and even tried to use with on a restoration, just in case my data has been corrupted somehow.

  I tried to use it with a different network sim card and also tried it with a sim card, just so use it on wifi, the same problems.

  I was sent a new battery so tried both batteries.

  I have reset to factory several times.

  Any help would be appreciated.

  Linda

  It happens to any type of equipment.

• Pavilion DV8T 1200 CTO - wf681av product for the wireless button

  The Wireless 'button' above the keyboard has been randomly by inadvertence/turn the wifi market card.  If he had repaired in September.  It's done now again.  This seems to be a design problem.  Tech will replace the keyboard in a few days.  If it fails once again, is it possible to disable this key, or even the whole of the "smart media" button set?

  Cancelled installation of the keyboard - which would have been unable to help.

  The update of Microsoft seems to work - no problems in the last 24 hours.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96360-1&cc=us&DLC=en&LC=en&...

  Hello

  Try this Firmware update to fix the problem.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-96360-1&CC=US&DLC=en&LC=en&os=4063&Product=4100035&sw_lang=

  Exit the:		2011 06-20
  Version:		V92
  Compatibility:		Microsoft Windows 7 (32-bit), Microsoft Windows 7 (64-bit)
  Fix/development:		-Fixes an intermittent problem where the capacitive touch button for the wireless LAN active inadvertently. -Fixes an intermittent problem where the bass/treble scrolling capacitive area adjusts inadvertently.

• treble buttons to quick launch keeps flashing on the screen and wifi turn off voltage

  HP pavilion dv8 quick launch button treble keeps flashing on the screen and now and again the wifi turns off and I have to keep back on.

  Hello

  Unless you have already done so, download and apply the firmware update for the capacitive strip on the link below which is intended to fix this particular problem.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-96360-1&cc=us&DLC=en&LC=en&OS=4063&product=4034201&sw_lang=

  After the update has been applied, restart the laptop.

  Kind regards

  DP - K

• WiFi turned off always dimmed on Windows 8 Pro and I'm desperate to fix.

  Hi all

  WiFi another number and before you call me a noob, please! Let me address a few things.

  This question has been asked and requested by many users of HP, but there aren't even all the threads with a resolute brand, so here I am again. My pc won't connect to the wireless network and key (f12) function does not work.

  This pc was originally from Windows 7, but has been updated to Windows 8 pro.

  Specification of the

  OPERATING SYSTEM

  Windows 8 pro 64-bit

  Model

  HP Pavilion dv7-7030us Notebook PC

  BIOS version: F.24.

  Here are things I tried and JUST does not work.

  1. Updated all the software of HP Pavilion dv7-7030us Entertainment Notebook PC drivers & downloads
  2. Updated the software and the driver for Intel Centrino Wireless - N 2230 of their site.
  3. "Sleep" mode-> and press f12
  4. Remove all network drivers and reboot
  5. reinstalled button wifi driver
  6. Reinstalled HP power management software
  7. Network Diagnostics
  8. Order, service started WLAN then restarted
  9. Have you tried several different Bios
  10. etc all possible solutions provided to the Board of Directors

  After all this, my wifi says OFF and still grayed out and can't handle it to activate it.

  Right now, if I press f12, it only turns on and outside airplane mode and it is still organge, want it white.

  Please please help, I need to go about my business in a few days and would like to fix this ASAP!

  Thank you!

  Gee Daigo Kawai

  Well well, weird.

  After that the recent windows update, the problem has been resolved. Don't know why, but I have no more problems with the Wifi. Interesting.

• WiFi turns off and then don't come back

  I have a new (30 days) Macbook Air, but suffers more and more the following problem: for reasons I can not determine, the Wifi turns off. When I try to turn it back on, it will not go back. The only way to let him back on is to restart the Mac. Sometimes, when I reboot, it takes a long time to restart, sometimes not. But once it restarts, Wifi is back.

  Thoughts?

  Wi - Fi is really turning itself off?

  If this is the case the icon Wi - Fi in your Mac's menu bar looks like this

  

  Confirms that this is what you are experiencing. If so, please contact AppleCare. Click on the Supportlink above.

• Sat Pro L10: LCD screen and market off button / stop

  Ive had my L10, little more than a week and im having problems with the on off button does not turn on the laptop properly, so I need to keep it easy on and outside. After awhile, it will load up finally. However now wen it starts after about 5 minutes the laptop just freezes. You know the segestions

  Hello

  problems with start-up the machine always indicates a hardware failure. So you should take it to the service to be fixed.

  Good bye

• Satellite P500 - Eco, speaker and touchpad on/off button does not work

  Hello

  I love my new Satellite P500. Great laptop!

  But I have a little problem with the eco, "speaker" one button touch pad touch power button. They do not work! 2 days ago that I updated my Windows 7 after the same problem. Today, I have the problem again.

  I tried an option where I can support this button, but no result.

  Is it possible to reinstall?
  I installed the software eco again, but it will not work with the button on the left side. Same thing with the touchpad on/off button.

  Any idea?
  Thank you

  Alexander

  Hello

  Nice to read are do you like your new Satellite P500. My friend also bought new Satellite P500 and it is also very satisfied. It s a large notebook with fast and new hardware features. The design is fantastic, I must say.

  Anyway, you can reinstall the eco and Toshiba Value added Package utility that controls these special functions. The two utilities that you can get on the Toshiba page:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Good luck! :)

• WiFi turns off and have to constantly reboot

  WiFi turns off and have to reboot to recover.

  1. Windows version?

  2 mac model/year?

  3 driver Version?

  4 OS X work?

  5 Ethernet?

• Listener of the Volume buttons and switch off & on

  I want to do tha background applications and I would add the listener for the Volume buttons and light switch off & on. Please help me how I can do this.

  Thanks in advance.

  Thanks peter & simon. Its has helped for the my requirement.

  public MyApp() {}
  Push a screen onto the stack in the user interface for rendering.
  pushScreen (new MyScreen());
  addKeyListener (new ShortcutHandler());
  }

  private class ShortcutHandler implements KeyListener {

  {} public boolean keyChar (key char, int status, int time)
  Returns false;
  }

  {} public boolean keyDown (keycode, int, int times)
  If (Keypad.KEY_VOLUME_DOWN is {Keypad.key (keycode))}
  Returns true;
  {} Else if (Keypad.KEY_VOLUME_UP == {Keypad.key (keycode))}
  Returns true;
  {} Else if (Keypad.KEY_LOCK == {Keypad.key (keycode))}
  Returns true;
  }
  Let the system to pass the event to another auditor.
  Returns false;
  }

  {public boolean keyRepeat (keycode int, int times)
  Returns false;
  }

  {public boolean keyStatus (keycode int, int times)
  Returns false;
  }

  {} public boolean keyUp (keycode int, int times)
  Returns false;
  }

  }

• How to use commons composition on-board charger to charge several compositions with a next button and back?

  I work on an interactive book and have set up each page as a separate publication on the edge.

  I use the common edge JS library to load several compositions in a main composition.

  You can see how it works here: edge Commons - Extension Library to animate Edge and Edge reflow. EdgeDocks.com

  The way in which the municipalities of edge tutorial is set up requires a button for each publication that I want to load. I'm interested in loading multiple compositions with a 'next' and 'back' button and a 'shot left, the "forehand" on the content symbol gesture loaded in each composition. I also have the characteristics of drag on the icon content do not interfere with the interactive elements on the charged composition.

  Please suggest a solution that works without adding additional scripts beyond the Commons of edges and jquery.

  Sort of. I use this code inside an action for a button symbol. But it does not work perfectly. Trying to debug.

  I would like to know if you have a bit of luck.

  Check if there is already a pageCounter

  If (typeof EC.pageCounter = "undefined") {}

  It does not exist, so initialize it to the first page

  EC.pageCounter = 2;

  }

  check if the page is only 1 digit - patch for single digit

  If (EC.pageCounter< 9)="">

  It is, so we need complete a 0 on the front.

  EC.pageCounterString = '0' + EC.pageCounter;

  for example, 01... 09,11,12, 13... 115, 222352...

  }

  else {}

  EC.pageCounterString = EC.pageCounter;

  }

  EC.loadComposition (EC.pageCounterString + "/ publish/web /" + EC.pageCounterString + ".html", sym.$("container"));

  EC.pageCounter = EC.pageCounter + 1;

  TODO for back - 1

• Several buttons and an EventListener

  Hello world

  I put 10 buttons on my stage, name it "b1", "b2", "b3", "b10".

  All of these buttons should use the same function.

  Is it possible to dynamically?

  var r: Array = [1, 2, 3, 4, 5, 6, 7, 8, 9, 10].

  for (var i = 0; i <.) Length; i ++) {}

  button = "b" + a [i];

  This [button] .addEventListener (MouseEvent.CLICK, onClick_b);

  function onClick_b(pEvt: Event): void {}

  my_mc. Play();

  }

  }

  Only the button 'b10' play my function.

  Someone at - it an idea how all other buttons serve this function?

  Thank you! C.

  If you want to use the table 'a' then your for loop just needs to be:

  var a: Array = new Array (bone, btwo, bthree);

  for (var i in a) {}

  a [i] .addEventListener (MouseEvent.Click, onClick_b);

  }

  The line key = 'b' + a [i]; has several problems. You not report 'button' to be a variable, then you will probably get an error. Using the button is not necessary in all cases. The part, "b" + a [i]; feel bad a letter b for each of the elements of the array. The problem with that is that you end up with a string. When you try to add an event listener to this string, you will get another error.

  The names of instances of objects on the stage are not strings, they are values of property and so they are not presented with quotes around them. A button instance on the stage with an os name, or adeux, just shows that, OS, not "BONES", in the code.

• CP4 - Pause a slide with several buttons and continue after clicking a specific button

  Hi all

  I know that a break has been discussed, with the idea that you can use a clickbox (tiny/transparent) to pause the slide in CP4.

  My problem is that I have a few buttons to show/hide a scenario/question in a slide that is suspended with a clickbox.  I would like a particular button to advance the slide (for example, the button 'Next').  Currently * any * button will UN-pause the slide even if all the buttons use advanced actions and are not defined for advnace slide to the click.

  Basically, I want to achieve this goal:

  http://kb2.Adobe.com/community/publishing/871/cpsid_87182.html

  Scroll down for the film and ignore everything apart as a result of clicking on the US/Europe/ISO buttons, you don't advance the slide. (I don't like on all counters/times etc.).

  BB

  (just in case it is useful to my slide includes):

  (1) invisible clickbox to pause at the top of the timeline (i.e. "put on the map"

  (2) an another clickbox with a legend of success/failure (that I want to advance the slide)

  (3) a "Hide" button that hides the name of a legend and shows another button (all with a tip action)

  (4) a "show" button that shows the 'hide' button and the legend (by peak action)

  (5) a couple of areas of turnover used to mimic navigation so that the user can click in the right place for (2).

  )

  Hello

  What's you point to one of my articles? Oh, I see now you are intrigued by the little film. It was created with Captivate 5 and CP4 is a little heavier.

  I just answered a question similar, but explained by adapting the user file. He wanted to have several areas to click that showed a text caption and offer the user the opportunity to click as many times as he wanted to in order any on those select boxes. Only when you click on the continue button (or click box), there should be a navigation to the next slide. If I understand you correctly, this is a similar case?

  My workflow: do NOT use multiple actions for areas of click to show/hide captions. He must not trust at all, and in addition you must go back the playback head to avoid it continues after clicking on a CB. Create a tip action for every click like this screenshot:

  

  Here, a single text of the legend was hidden, but can be extended to many of course. The last instruction (assignment) is important: it puts the read head back a frame, so that it remains before the point of interruption.

  I blogged about this type of micro-navigation once, but the examples are for CP5 and later versions:

  Micro-navigation in Captivate

  Lilybiri

• Several buttons and rdcmndGotoFrame with rdinfoCurrentFrame

  I'm working on a project using the buttons and multiple advanced actions to allow users to make a self-assessment with a rating scale. The buttons are how they enter their rating.  I had the problem of when I clicked on one of the buttons it would advance the slide instead of wait for the user to click on the next button. I searched the forums and found the solution to use rdcmndGotoFrame with rdinfoCurrentFrame, that fixed my issue of the advance slide and let my rankings correspond correctly to the top.  But now I have the problem that the slides with side buttons do not play, even when none of the buttons were clicked to trigger rdcmndGotoFrame with rdinfoCurrentFrame.

  I would be very happy to help.  Thank you!

  Hi Laurie,

  Does not look further for the reason of corruption in this action InitSlide, but with a fresh mind have now some questions and answers:

  • the InitSlide action makes no sense at all; You must have misunderstood this other thread, because the variables that you are reset to 0 for each slide will be re-populated by actions on the various buttons. change the action on enter to the 3 critical thinking slides to continue (BTW, don't use not identical ID even for slides, when you use the button to its use in the interface the user advanced, Actions the same slide jumped 3 times, ID was quite confused until I realized that you used the same label on slide three times)
  • the variables that might perhaps need to reset to 0 are those which are incremented after each slide as v_Critical... (another tip: check the shorter labels...) ; but this can be necessary if you allow the user to resume all the slides; is this the case? Reset would be enough once, entering the first criticism... drag

  You do not have to stagger the buttons as you did on the first slide of critical thinking, with the statement that Rewinds the playhead in the tip action, they have the same point of suspension. Another tip (I was born as a sensei): label the buttons, if you graduate them before you create / label advanced actions, you can even use the same label for actions, makes it much easier to attach to buttons (what about Bt_CT1_1 for the first button on the first slide, Bt_CT2_7 for the seventh button on the second slide etc...)

  Does make sense?

  Lilybiri