WIN/AutoRun.Agent.ABH.worm

Similar Questions

• HP Officejet 7000 Wide Format: HP 7000 809 does not print the data

  I updated to the last version of drivers and full software (14.8.0 dated August 2014) and ran HP Scan Doctor which States product is installed correctly and all systems are ready to print, all tests are checked as well with the green arrows. I have the printer connected via USB - 6 ' cable 2 wired connection. The results after the execution of Test Pages from doctor Scan is the same no mateer I want. Test page initialled, the printer is atemtps insiders to print, momentarily stops and then sends an empty page, no data.

  My computer is a Dell 8700, channel quad 3.4 gig ram 12 GB, Nvidia videocard W/2gig Ram, drive 'C' Solid State 240 G on which is installed an OS Pro 8.1 Windows with all latest updates. The Dell system has USB 2 and 3 ports and I made sure that this printer is connected to port USB - 2 ports (USB Ports are color coded).

  I thought it was a driver problem, since I had been running the printer with Win 7 Pro last worm update o/s without any problem, but since the switch to the wire to 8.1 win that developed and that I just downloaded latest software and drivers for the moment, I'm stumped. SUGGESTIONS, thank you I use it with my CAD software for businesses.

  Welcome to the HP community @Budjet1,

  I noticed your post on the white pages of your Officejet 7000 Wide Format printer print test, even if the print and Scan Doctor shows everything to check very well with the printer. I wanted to respond to tell you about my suggestions. It may be a problem internal to the unit, or perhaps with the ink system and recommend to try the steps in the guide I posted below.

  If the test still pages print as white pages, try to contact HP to discuss a replacement for the printer.

  • HP Officejet 7000 (E809a), 7000 Special Edition (E809b) and large printers Format 7000 advantage (E809c) - solving print quality problems

  Testify of my answer by hitting the thumbs below and press the button "Accept as Solution" if I helped you reach a solution!

  I hope this helps you!

  Contact HP:

  Step 1. Open the link: www.hp.com/contacthp/
  Step 2. Enter the product number or select Auto detection
  Step 3. Scroll up to "still need help? Fill out the form to select your contact options.
  Step 4. Scroll down and click on: contact HP options - click Get phone number
  File number and phone number appear

• 4540 proBook s: Probook product key for the operating system 4540 s

  Hi, I have laptop with Win 8 preinstalled and software, but my drive HARD failed recently and I need to reinstall now. For now, I'm downloading Win 8.1 standart worm. Question is if I install it with cracked product key will this Windows activated online? Because that's what they said about the service in Bulgaria. Thank you.

  Hello:

  See if you can order the recovery media W8 for your laptop by calling HP support in Bulgaria.

  The hours businesses & consumers + 359 2 976 95 62: 9-18

  Have the serial number of the laptop handy to give to the customer service rep.

• KB971644 update failure, impossible to reinstall error 0x8024000B most updated for the Base of Vista 64 system

  Have tried in different ways; relocation, help, same Win Update Agent... any response to this?

  Hello

  You can try the steps from the article below and check if that helps.
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-8024000B

  For more information about the update, visit: http://support.microsoft.com/kb/971644

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Alert to the virus by practicing a game

  By practicing a game I d/l from a site that I was a member for a long time, with no problems. The game has stopped working and I got an error msg that this problem was caused by a W/32/gaobot.worm.gen.u-Win 32/RBot.3eu/Worm, a known computer virus. He's going to suggest, I get a updated antivirus software, but I do not have a current software running.  I'm afraid that the website that I have never had a problem for so long is not as safe as I thought.  or that my antivirus/antispyware is not very good.  Any suggestions would be helpful.  Thank you.

  A virus is a program.  If you download and run a program, it can do what it is supposed to do.  Antivirus software looks at programs you download and check if they are in their catalog of known viruses.  If it does not what in the catalogue, it assumes that it is good and allows you to run.  Given that catalogs are updated all the time, that they can longer late with an update that discovers (once you have been infected) that the program you have running contains a virus.  Then warns you that you are now infected.

  These days, the infection tends to come because people have exceeded the older software such as Adobe Reader, Java and Flash versions.  Because people are rarely (if ever) looking for updates of these programmes, they are often easily infected with new viruses.  Virus writers are constantly changing and updating their virus so that the anti-virus software is unable to detect them.

  You should contact the company that makes your antivirus software and investigate the best way to clean your machine out of the virus you have with them.  And make sure all your system patches are up-to-date and your various software is up-to-date.  I would check out Adobe, Java, and Flash as they all have a lot of known holes in them that current virus writers take advantage of the.  But, at the same time, if you download games on Internet, it is very possible that files can be infected as well.  Therefore, always get a trusted site or source files.

  K

• Error when opening file reader pen "the driver or network connection that the shortcut 'Target.lnk' refers to is unavailable. Make sure the disk is properly inserted or the network is available, and then try again. »

  Original title: during opening of pen drive file to msg "the drive or network that all connection 'refers to mpr shortcut' folders.lnk all in unavailable.make that the disk is properly inserted or the network is available and then try again."

  OS:-xp sp2

  pen drive :-transcend

  earlier, my USB had worms, bt Finally I took it off my ESET internet security (fully updated).

  BT still records are transformed into shortcut of 1 kb. and makes me worried coz I m nt able to open these files... Please help me out of this problem... I need my data, its urgent.help me as soon as possible to change these documents in their original format.

  my folders have files .doc, some do' report.unfortunately not have a backup of these files.

  target location: Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN

  In the location target properties are even 4 all records

  Clinical target:-H:\Z3ojKiH9lvFefkO0mG6Hl1XplgLV3L0YJVfdZRr3dtLhEN80DnzEPQX8Y2sziakx2axTnS4SA0447SPkbMn4QN\73mrVQz9rDByh9hfKJ9v0lt5z3m0s5hP0l.exe real sheet.xls

  What exactly is...

  I ve deleted the worms... checked by ESET, CLAMWIN PORTABLE, lapi ny window 7 WINDOW DEFENDER friend.

  ESET that worms have been Win32/AutoRun.VB.UG.Worm.

  now, I ve you gave details d, should know the problem I ve.i believe.help me

  Thank you for your time, but I did nt get the solution everywhere so formatted, it

• A single file in my Adobe Reader file detected as trojan? (AcroRd32Info.exe)

  Hey everybody,

  I have a question malware for you guys. A few days ago I let a scan of viruses/malware/etc on my PC (via a program called ClamWin anti-virus), who detected a file as a Trojan horse. Here is the line from Scan report:

  C:\Program Adobe 8.0\Reader\AcroRd32Info.exe: Win.Trojan.Agent - 629666 FOUND

  
  

  So it confuses me a little. As you can imagine, I'm not really versed in this topic; but it is even possible that a file of a large company like Adobe could be seriously infected? I mean, it obviously seems to be part of Adobe Reader. Or this file maybe just sneak into this folder and start claiming that it belongs there? Or is there perhaps another reason why it has been detected as a Trojan horse, perhaps a kind of "misunderstanding"?

  In conclusion, should I worry that there really is a horse of Trojan on my PC? In this case, it would be wiser to reinstall my OS and wipe the entire hard drive?

  Thank you!

  First of all, it is a rather old version of the player you have installed... It is not compatible with any modern operating system. You should consider upgrading to the latest version, XI player.

  If you have installed the application directly from Adobe so you can be certain, it contains no malware and there is a file of this name in the original installation of the drive, but it is always possible that an external application infested it. Or it could be a false positive... Maybe ask your AV software manufacturers, or try using another to check a second time.

• can install win 7 full worm on the new pc

  I bought a new 810qe of Phoenix HP ENVY custom Desktop PC with win installed 8.1 and perhaps down the road I would like to know if I can install win 7 full worm on this subject, I mean if I bought a new drive or reformat the drive and try to intall win 7 I have questions or problems anywhere? Thank you

  Thank you OL G - I did a lot of reading around forums on this subject, but I think that I'll stick with 8 for the future victory, I know things will just get better for her... Thanks again!

• Need help to solve the problem with worm:win:32 / cridex.e

  Please help me to solve this problem worm:win:32 / cridex.e

  Hello

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Is there a way to update (05.16.12) remove Trojan: Win/32/Orsam! RTS and worm: Win/32/renocide. THERE

  I just got the results of the Microsoft 1.0.3001.0 security scanner (msert.exe modified 05/11/2012), indicating that I have Trojan: Win/32/Orsam! rts and worm: Win/32/renocide. Y I use Norton Internet Security and are satisfied with their products for 20 years. I would have thought that NIS would have captured these and have them destroyed, but apparently not. According to Microsoft, they are also changing their programs to eliminate these parasites. I am running Windows Vista Home Premium, Service Pack 2, on a desktop HP Pavilion a6400f. I also have a stand-alone Seagate harddrive campaigns, that while I was watching some the data blinking, picked up another 'virus '. I think it's in my C:\ drive backups. I would appreciate any useful information to remove completely the latter, such as mert indicated that they were only "partially removed? My PC is set to automatically receive updates from Microsoft and HP.

  Hi, Fireballs517,

  Search in the Norton quarantine files - is quarantined virus?  Sometimes, this watch as always on the system when it is not deleted.

  Execution of Microsoft Security Essentials: start here - https://support.microsoftsecurityessentials.com/

  and select the link that says - I think my computer is infected - and support and select the option for phone, chat or email (options vary depending on the region)

  Otherwise:

  You can start here: https://consumersecuritysupport.microsoft.com/ or here: http://support.microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab0 for the help and support for malware infections.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

• BlackBerry software Win 10 worm 1607 - link is no longer connecting

  Well, MS Win 10 worm 1607 "anniversary day" broke a couple of things (although I like it in general)

  Link does not detect my camera any longer.

  All this experience?

  Guess I'll try the uninstall/install to see if this fixes...

  That's what I did, that fixed it.

  A few caveats. In my case, the computer has detected my passport and mapped memory and the memory card to record. Mixture worked. That the link wouldn't connect to the device.

  I did a simple uninstall of BlackBerry Desktop using Windows software. Then cold reboot. Then installed the software of office again. It worked for me.

• HDP Agent Device emulator and Bluetooth Stack for Win

  Hi all

  We have successfully installed the battery Bluetooth for Windows (Toshiba v7.10.01)
  We would like to know the steps on how to test the examples in the SDK from Toshiba with HDP Agent Device emulator?

  I found this doc from Toshiba:
  Have a look here:

  * How to get the battery Bluetooth TOSHIBA SDK *.
  http://APS2.toshiba-tro.de/KB0/HTD9602MK0000R02.htm

  I hope this helps!

• CSA 5.2 agent not starting not not on Win XP.

  Hello

  Even if this happened to me once before, I not had this problem once again so far. The agent apparently installs ok, restart the workstation, but on reboot it is not displayed by the operating system to the system tray and can be reinstalled or uninstalled. During the reinstallation of attempts, a window opens saying 'Unknown error when running startup files' and when you try to uninstall, "Setup was unable to stop the service officer of CSA." The installation will be interrupted"it is a custom kit. I know that it works at least in part because it prevented an application to capture the keystrokes. The PC is Windows XP Professional, version 2002, Service Pack 2. According to the Release Notes, it fits the criteria. Do you have a suggestion?

  Thank you

  Guido

  It is likely that there is no rule Agent user interface associated with the host.

  In the absence of a rule of the user interface, the host will not display the red flag in the system tray.

  It will not also any change agent via reinstall or add/remove programs because you cannot meet all requests.

  Tom

• 8 win fails to connect to the Agent to install all the Windows user

  Hello

  When I start Windows 8 I get a box saying cannot connect to a windows service. Windows all users install the agent service. Event ID 7000. If I'm on online help link I get "page not found". The result from my point of view is that I don't seem to be able to install updates for all programs. Windows updates crashes and PSI download updates but hangs when it comes to installation. I don't really want to reload Windows I'll lose all my 3rd party software and it takes an age to recharge. I had to do it about eight times since I got Windows 8 (7 months). Can anyone suggest a solution please. I'm reasonably computer literate, but I do not understand about the permissions etc. Ive tried to attach a copy of the event log details.

  Thank you

  Save the details below.

  +

  System

  -

  Provider of

  [Name]

  Service Control Manager

  [Guid]

  {555908d1-a6d7-4695-8e1e-26931d2012f4}

  [EventSourceName]

  Service Control Manager

  -

  Event ID

  7000

  [Qualification]

  49152

  Version

  0

  Level

  2

  Task

  0

  OpCode

  0

  Keywords

  0 x 8080000000000000

  -

  TimeCreated

  [SystemTime]

  2013 06-21 T 16: 35:28.673941600Z

  EventRecordID

  33066

  Correlation

  -

  Execution of

  [ProcessID]

  812

  [ThreadID]

  6004

  Channel

  System

  Computer

  SatP850

  Security

  -

  EventData

  param1

  Application experience

  param2

  % 1053

  410065004C006F006F006B00750070005300760063000000

  Binary data:

  In the words

  0000: 00650041 006F004C 006B006F 00700075

  0008: 00760053 00000063

  In bytes

  0000: 41 00 65 00 4 00 6F 00 A.e.L.o.

  0008: 6F 00 6 b 00 75 00 70 00 o.k.u.p.

  0010: 53 00 76 00 63 00 00 00 S.v.c....

  I do not know...

  I've seen some say that they did not have this file, and simply adding the folder fixed their problems.   Look and see if the following folder exists, otherwise create a new folder;

  AUInstallAgent C:\Windows\

  May be also here;

  http://batcmd.com/Windows/8/services/alluserinstallagent/

• POS 6.0 cannot install SQL Agent (win 2008 R2)

  Hello everyone

  I have a windows 2008 R2 64-bit and I have installed on this SQL 2008...

  I had the same server with WTP installed on it and backup jobs are already on the POS device.

  I created another server with the same name and same ip address. closed down the old one. and just reinstalled the on the new server.

  now when I try to install the VDP officer on the news server tasks backup already exist on the POS device, it does not install and it says that it cannot find the vdp device...

  tried to install it with the ip address and domain FULL name but same error but when I try to do a ping of the ip address and the host name of the vdp pings normally.

  I suspected although maybe the firewall, but I disabled it and still the same thing...

  can someone tell me where to look or all around the work or anyone with a similar problem. Thank you.

  I suspect also that the former agent of POS should be removed with the work of backup of the POS device, but I can't find anything about the deletion of the former agent or cancellation of registration it of the POS device in the docs.

  

  fixed after the deployment of a new VDP 6.1 and installing the new SQL Agent VMwareVDPSQL-windows - x86_64_6.1.0.173.msi