Win XP PRO freezes

Similar Questions

• Running win XP pro sp2 mouse moves, but everything else does not

  Running win XP pro sp2 mouse moves, but everything else does not respond after a certain time. Just started doing this last month. Had Xp for several years without ANY problems at all.

  Hi BobM202,

  1. did you of recent changes on the computer?

  2. you receive an error message?

  3. do you have security software installed on the computer?

  4. are you referring to freezing except office mouse movement?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• The cutting tool will not "save under" Win 8 Pro

  After you use the cutting tool, the program freezes to the command prompt "save under"... I just upgraded to Win 8 pro. I also ran sfc /scannnow to repair corrupt files... Nothing is presented with an error...

  Any advice would be great!
  Thank you
  Josh

  Hi Josh,.

  It would be great if you could answer these questions to help you further.

  1. have you made changes on the computer before this problem?

  2. you receive an error message or error code?

  If you are facing the question recently, then I suggest you to perform system restore to a point when the computer was working fine.

  Note: when you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Use capture tool to capture screenshots: http://windows.microsoft.com/en-us/windows-8/use-snipping-tool-capture-screen-shots

  Hope that the information provided is useful.

• How to open my GMail on Firefox. Using Win XP PRO SP 3.0 32 bit

  I use WIN XP PRO SP 3.0, 32-bit
  How to access my account GMail using Firefox?
  I tend to forget all about my GMail, so need to read, a lot of emails, he...
  Please, I'm a novice user step by step please
  Thank you very much
  Sylvia

  Just type "gmail.com" into the URL in Firefox toolbar and press the Enter key on your keyboard. You can directly access the Gmail login page.

  Awesome Bar - Find your Firefox bookmarks, history, tabs in the address bar

• Error message @ boot Win 7 Pro "it was Aproblematique from C:\programdata\ofpviaowu.dat - the specified module could not be found."

  Error message @ boot Win 7 Pro "there was a problem starting C:\programdata\ofpviaowu.dat - the specified module could not be found."

  This error message appears whenever I have start my computer and windows starts (Firefox doesn't start up). 15.01 Firefox work properly otherwise.

  This started after I installed the 15.0.1 patch.

  I uninstalled and reinstalled Firefox but the problem remains. Search Google for "ofpviaowu.dat" came with "2012-08-29 Firefox version 15 startup Crash Report" as the only listing.

  Is this a Firefox problem?

  My system has this file: C:\ProgramData\Mozilla\logs\. I don't think that Firefox or update service should write directly to the root of C:\ProgramData\. It could be a configuration error, or it could be completely different.

  You may be able to remove your boot sequence problem .dat file using Microsoft Autoruns utility: Autoruns for Windows. If you find an entry, can describe you it?

• MacBook Pro freezes when connected to external speakers

  Hello

  This happened to me twice in the last two weeks, both times in the same circumstances. I take my mac at the Apple Store tomorrow, but I found it worth to post the question here:

  My Macbook Pro freezes when playing iTunes AND connected to an external audio system. Won't happen only when it is connected to the headphones or when you use the internal speakers. This does not happen immediately. It took about 10-20 minutes, and the specific song ends to play even if the computer is already frozen. I wonder what follows:

  This could result in the latest version of iTunes (12.3.3.17)?

  Or is there something funky going on with the material of my Mac?

  FYI, I have a Macbook Pro, 256 GB early 2015 and I've just updated to the latest OS (El Capitan 10.11.4)

  Any suggestions are welcome. Thank you!

  Could be due to the failure / faulty USB hub or cables (USB or audio, regardless of your game to the top). Try to connect without a hub (if you are using one) and with different cables.

  Given that the issue does not appear when you use a headset, I don't think it is related to iTunes.

• Can I use the latest version of Firefox. I have Win XP Pro PIII 600 Mhz. 3.6.25 excellent works, but I still get the message to be updated?

  I am so happy with Firefox 3.6.25 (thank you), but I'm worried update the program because the requirements of system does not respond to my PC or does it? I have Win XP Pro SP2, PIII 600 MHz I still get messages on your part on updating the program but do not know if it is possible.

  Stick with the version you have now. The versions of Firefox 4 + need a processor with SSE2 instruction set, as in the Intel P4 processors.

  http://www.Mozilla.org/en-us/Firefox/9.0/system-requirements/
  
  Recommended hardware

     * Pentium 4 or newer processor that supports SSE2
     * 512MB of RAM
     * 200MB of hard drive space
  

• 4030CDS WIN 2000 pro problem

  Hello
  I try to install win 2000 pro on the laptop next - Satellite 4030 - I insert the CD and press and hold the 'C' key to boot from the Windows CD 2000 Setup screen appears and begins to install the drivers. The installer gets so far then the following message appears on the screen:
  STOP: 0X000000A5, 0X814884DC, 0X00000000, 0X00000000)
  The ACPI BIOS in this system is not fully complient with the ACPI specification. Please read me text for possible workaround solutions. You can also contact your manufacturer for an updated BIOS.

  So, what do I have to Flash the BIOS with the latest version, or is it possible that I can work around that? I've done a few things with PC (built some etc etc) BUT I have never tried flashing the BIOS before and I heard that it can go very wrong! Any suggestion would be appreciated!

  Thank you

  Hi Marc,

  If you update BIOS there are always good. The last, you can find on http://eu.computers.toshiba-europe.com under Support & Downloads Download BIOS.

  This is the zip file, and there is also a text document that contains the BIOS update procedure. Follow this description, and you can do it with success.

• Satellite A30, Win XP Pro SP3 - modem does not work

  Another problem with this laptop Satellite A30
  The built-in modem does not work.

  * Explanation: *.
  The driver is correct and downloaded from the Toshiba support site.
  The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

  When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

  I tried to change the com port of the modem to different numbers, but the problem is the same.
  I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

  This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
  Thank you
  S.

  Hello

  Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
  > It's strange, because I did it at least 2 other facilities on this machine pro win xp
  What other facilities?

• ProDesk 600 G1 TWR: restore ProDesk for Win 7 Pro

  This is the situation:
  I have a HP ProDesk 600 G1 TWR with upgrade to Win 10 Pro. Some limitations of the software, we need to upgrade to Windows 7 Pro. There is the HP Recovery partition but F11 does not work, I think because for some reason, the HARD drive turned to the dynamics. Now, like a miracle, I found the DVD of the PC kit, well well, I'm not sure complete if belong to this concretely workstation, but HP for the same model.

  

  The question: what about the license? In my view, it is an OEM license and I don't have the key. Can I use the DVD Win 7 Pro for the recovery of the PC? What the activation process in this case?
  
  Of course, if it is possible just to use the recovery partition, will be great.
  Thanks in advance!

  Hello:

  You should be able to use the recovery discs to install W7 without key.

  This member of the forum has just done the same with a similar business office.

  His situation was that it has installed an SSD.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/install-new-SSD-with-a-fresh-install-of-Windows-7-Pro-that/TD-p/5611011

• Re: Tecra R950-18F: win 8 Pro starts a new SSD drive

  Hello

  Having a few issues with the victory 8 DVD pro included with my laptop.

  BIOS is set as UEFI + secure boot, win 8 pro dvd starts and I can start recovery, after a while, he asks disc 2 and starts to recover win 8.

  After completion and reboot, it does not start and shows just the toshiba logo.

  Factory hdd with SSD OCZ VERTEX 4 is replaced by the bios.

  What could be the problem?

  > Drive HARD factory is replaced with SSD OCZ VERTEX 4 recognized by the Bios.

  You have the same start-up problems 8 win using the original HDD equipped Tecra R950?

  From my point of view, it would be possible that this laptop does not start successfully because of the new SSD.

  I recommend you check the previous HARD disk.
  If the laptop could start correctly, the problem is related to the new SSD drive.

  In some cases, it would be possible that the SSD firmware must be updated.

• Drivers Win XP Pro and install a command of Qosmio E10

  Hello
  I recently bought Qosmio E10 in Korea. The OS is Korean Win XP Home. I would like to change, so I guess I have two options:
  1. get a restore in English CD. But I read that Toshiba has the strange rule do not give the CD of restoration of another language. I wrote to them, they answer for now.
  2 install Win XP Pro myself (I have only this license). In this case, the question should be able to get all the drivers I need. I found good drivers in several places:
  On http://www.toshiba.co.kr, but I worry that these drivers are for Korean XP.
  The other place is http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp
  In this place, most of the drivers is for Media Center Edition. There are drivers for XP Pro, but they are not so many and there is no order of installation. There is for example, no NVidia driver, this driver is available for the media center. Maybe I can use Media center drivers on XP Pro?

  So my question is: do I have to use drivers and and what order to get a good working XP Pro. It would be good to know where to download QosmioUI. I found the Linux player and I install it, but I also want to have the drive in Windows.

  Hello

  As far as I know that the software is delivered on laptop and if you buy a laptop, you automatically buy OS and license for use. This means that you can not order a DVD of recovery on another language. Qosmio E10 comes with Windows MCE2004 SP1a.

  The only possibility is to install the Microsoft Windows XP (full version, with or without MCE) operating system, and then install all the necessary drivers, tools and utilities separately.

  For the English language you can find them on http://eu.computers.toshiba-europe.com topic support & downloads.

  Good bye

• 2100 pro: No recovery WIN XP Pro disk

  I have a 2100 Pro (off warranty now) current running Win XP Pro, but have no operating system recovery disks. I am replacing the failed drive and need the disks. I tried direct Microsoft but they referred me here. Where can I get it please?

  Hello

  If you want to have the original recovery media for your model of laptop you can order by the authorized service partner.

• Compaq 610: [Compaq 610, P/N: NX550EA #ACB] latest driver for the SATA AHCI for Win 7 PRO SP1 RUS x 64 controller.

  Hello world!

  Could someone, please, tell me, why there is no driver SATA AHCI controller for Compaq 610 for Win 7 PRO SP1 RUS x 64 in the download section of HP support for Compaq 610?

  (01) where can I get the latest version of the SATA AHCI controller driver for Compaq 610 for Win 7 PRO SP1 RUS x 64?

  (02) the original Intel (r) Matrix Storage Manager V8.9.0. 1023 will replace the ' Standart controller SATA AHCI 1.0 (Microsoft) "(v. 21.06.2006 6.1.7601.18231) with the more recent/latest version?

  (03) will be the upgrade of the SATA AHCI driver improve the speed of read/write of my any percentage HARD drives or this idea is nonsense and absolutely useless?

  I'll be very grateful for any useful info! Respectfully, Tianuchka))

  Hello:

  I would use it to HP... the description tells you what it does.

  The HP 6910P has the same controller and chipset as the 610 HP.

  http://h20566.www2.HP.com/hpsc/SWD/public/detail?sp4ts.Oid=3357379 & swItemId = ob_85204_3 & swEnvOid = 4059 #tab1

  Who answers your questions first 2.

  Regarding the 3rd, I don't know whether or not you notice an improvement.

  If you want to update the driver, you can also install the last utility Intel chipset installation from the link below.

  Download, unzip and run the setup.exe file.  Then restart the PC.

  https://Downloadcenter.Intel.com/download/20018/INF-Update-utility-primarily-for-Intel-6-5-4-3-900-series-chipsets-zip-format

• Qosmio G30-163. Try to install Win Xp Pro on the new HARD 120 GB drive

  Hi all

  I am trying to install Win Xp Pro on a new 120 GB HARD drive, but windows setup does not recognize the HARD drive.
  I have only to install a (formatted) HARD drive on the laptop as main.
  The secondary place for HARD drive is empty.

  Can you please help me with this?

  Thank you in advance.

  Hello

  Rose is right you need RAID driver.
  Download from the Toshiba download page and load it before installation of WXP starts using the diskette drive/USB stick and F6 option.

  On this forum, you can find many threads with exact explanation how.