Win XP Pro SP3 language bar blue screen

Similar Questions

• can I switch from win xp pro sp3 Windows XP Professional x 64

  I have an old computer Pentium (32 bit system) (2001) with max memory 2 GB and I wish to Exchange my c: drive to a new 64-bit computer that has the capacity of up to 16 GB of memory.  I am currently using win xp pro sp3 and I don't want to move to Vista or 7 because I'm very comfortable with win xp pro screens.  I'm assuming that win xp Pro x 64 edition is similar for win xp pro in that regard.  Current box has four scsi drives, 2 CD/DVD, 4 pci for creating music cards readers, card Radeon video (2 screens), 2.2 GHz Intel Pentium CPU, 2 GB memory Rambus.  I'm go to Gigabyte GA45T-ES3G-ATX, CPU 3.0 Ghz 775, 16 GB memory Kingston Hyper X, videocard PNY 450NVS Quadro (4 screens), 2 SSD drives (100(c drive)/500 GB).  I opted for the Gigabyte motherboard because it has a pcie x 16 video card and 5 pci slots.  I use software Cakewalk mainly which has a capacity of 64-bit and some of my cards have drivers 64-bit available.  Other software will be able to run in 32-bit mode (x 86).

  My plan is to clone the c: drive current, load it on the new ssd drive and upgrade to Win xp Pro x 64 load if possible.

  Andrea

  First and most importantly, there is no way to upgrade from XP 32 bit to 64 bit, you must perform a "clean installation" of the 64-bit version and then reinstall your applications. Don't forget to back up your data files.

  Secondly because the card mother old and new are very different (device drivers and chipset), it is unlikely that, after cloning your hard drive to an SSD, the computer would even start.

  I'd rather you 32-bit version of Windows XP is a 'Reticular Full' version (OEM versions are related to the 1st motherboard it is installed on and can not be activated on another motherboard) is to reinstall XP 32 Bit to one of your SSD drives (you did not mention RAID), then install the drivers from Gigabyte.

  If you must go the 64-bit road know that 64-bit XP was not very well supported by software vendors and is not widely used.

  Also note that this socket 775 motherboard uses memory DDR3 and no common DDR2 for cards 775 mothers socket.

  J W Stuart: http://www.pagestart.com

• Win XP Pro SP3 loses settngs config on reboot.

  Win XP Pro SP3. To restart the machine, he loses the settings for programs such as: passwords, access programs, the mouse settings, registry numbers entered in the address book. Tried to 'Fix' the original CD; but he always loses these settings when the computer is restarted. Suggestions and solutions will be greatly appreciated

  Sadnewbie

  Hello

  1. did you further modifications of software on the computer recently?

  Method 1.
  Let us firstly the sfc scan and check if there is any missing system file.
  Reference:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 2.
  If the problem persists, then create a new user profile and then copy your current users assigning to this profile. For more information, see:
  How to create and configure user accounts in Windows XP
  http://support.Microsoft.com/kb/279783

  How to copy data from a corrupted to a new profile in Windows XP user profile
  http://support.Microsoft.com/kb/811151

  How to recover damaged Windows XP user profile
  http://support.Microsoft.com/kb/555473

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Dual-booting Win XP Pro SP3 - best practices of size Partition

  Hello. I want to create a dual-boot installation, both using Win XP Pro SP3 on a large hard drive while having an extended partition available for data. I expect in the next two years, going to upgrade to Windows 7 Pro. Put the two primary partitions to 20 GB enough or should I go ahead and do 40-50GB each in preparation for a future upgrade. Thank you!

  20 GB is too small to install and run Windows 7 well.  I'd go with 40 to 50 GB. Boulder computer Maven
  Most Microsoft Valuable Professional

• win xp SP3 installed then blue screens at boot

  Desktop Dell, have care about me, ran an update to SP3 last night and this morning, after whenever I turn on it blue screens, can't even get into safe mode.  blue screen error IRQ less or not equal or less than or equal.

  Any advice?

  Thank you

  You can try deacclerating the video card if its not a chip, I did it on a few when I got a blue screen after service pack 3 installs, then after deacclerating graphics, get the driver for the card, it is something that I found worked, i.e. If it has an attached video card, if not, disabled ime

• Win XP pro SP3. Windows software update will not download

  An accident on a Win XP PC ruinning legacy backup/restore S/W had failed. (3rd party stuff).  Installed a Virgin of Windows XP Pro SP3 (32-bit) on a new blank HD.  Connected, activated Windows.  It worked.  Tried to run Windows Update.  A clean installation is the first thing that update is download the Windows Updater S/W so we can understand what you need.  That the download failed.  Me hunting to a page that says nothing specific about why it did not work and gave me some links to try to solve the problem.  Follow the links and has begun to try stuff.  Some links are broken.  Find a suggestion to update IE ver 6 to ver 8.  Downloaded IE8.  only IE Ver 8 worked and updated.  Does not solve the problem of Windows Updater download.  I tried Fix - it.  He has ran, said he fixed some files, any info on what it fixes.  Does not solve the problem of Windows Updater download.  Found a few references to run a .bat file to rename files, a .bat file to force certain registry entries.  No one who has solved the problem of Windows Updater download.  Found several threads to download "iuctl.cab.  Each of these links has more, with a 404 error.  Never found the .cab.

  Win XP support ends soon and I need to get a clean update on this legacy machine.  Where should I go from here?

  An accident on a Win XP PC ruinning legacy backup/restore S/W had failed. (3rd party stuff).  Installed a Virgin of Windows XP Pro SP3 (32-bit) on a new blank HD.  Connected, activated Windows.  It worked.  Tried to run Windows Update.  A clean installation is the first thing that update is download the Windows Updater S/W so we can understand what you need.  That the download failed.  Me hunting to a page that says nothing specific about why it did not work and gave me some links to try to solve the problem.  Follow the links and has begun to try stuff.  Some links are broken.  Find a suggestion to update IE ver 6 to ver 8.  Downloaded IE8.  only IE Ver 8 worked and updated.  Does not solve the problem of Windows Updater download.  I tried Fix - it.  He has ran, said he fixed some files, any info on what it fixes.  Does not solve the problem of Windows Updater download.  Found a few references to run a .bat file to rename files, a .bat file to force certain registry entries.  No one who has solved the problem of Windows Updater download.  Found several threads to download "iuctl.cab.  Each of these links has more, with a 404 error.  Never found the .cab.

  Win XP support ends soon and I need to get a clean update on this legacy machine.  Where should I go from here?

  Go to start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

  To disable the horse notification that appears in the status bar on automatic updates is turned off.

  Go to start > Control Panel > Security Center > resources > change the way Security Center alerts me > uncheck automatic updates

  There is a known issue with Windows Update that address priority before you visit Windows Update

  Manually download and install the latest cumulative security update for IE8 and restart before

  visit windows update via the shortened link in your Start menu.

  When you have Win XP SP3 and IE8, it will be the necessary file

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

  It often happens that the installation of SP3 will break the windows update feature by not properly installing the windows update agent.  An older version of the windows update agent can be downloaded and saved in the C directory and installed by an execution command.

  Windows update agent is available during one of the linked pages

  http://support.Microsoft.com/kb/943144

  http://support.Microsoft.com/kb/946928

  Start > run > C:\WindowsUpdateAgent30-x86.exe /wuforce

  For the 64-bit version, change the command run 86 read 64

  In the alternative, there is a troubleshooting tool that can work to accomplish the same thing

  http://support.Microsoft.com/kb/949104/en-us

  http://support.Microsoft.com/kb/2714434/en-us

  A reboot is probably a good idea after each intervention.

  Now connect to windows update manually through your browser using the shortcut in the start menu link and your chances are better that it will work.

  When the latest version of windows and to connect to Windows Update will detect the old version of Windows update agent installed update agent will be installed after consenting to the ActiveX installation.  It will be the first thing that happens when connecting to Windows update if things continue normally.

  If there are still problems with Windows update try this utility.

  It is the #25 element in the repair tool to be implemented.

  http://www.tweaking.com/content/page/windows_repair_all_in_one.html

• Satellite A30, Win XP Pro SP3 - modem does not work

  Another problem with this laptop Satellite A30
  The built-in modem does not work.

  * Explanation: *.
  The driver is correct and downloaded from the Toshiba support site.
  The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

  When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

  I tried to change the com port of the modem to different numbers, but the problem is the same.
  I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

  This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
  Thank you
  S.

  Hello

  Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
  > It's strange, because I did it at least 2 other facilities on this machine pro win xp
  What other facilities?

• Satellite Pro L510 - crashes and blue screen

  Hello
  I am a new user of the Toshiba Satellite Pro L510, since last September, barely 3 months.
  Recently, had met 2 crashes (2nd is today s). As it happened today, there are blue screen that appears, which included messages like 'crash', 'written' physical memory... etc.

  In addition to send it for repair for this new laptop, I don't know what is the best way to manage this accident and what might be the best way to prevent this accident.

  Recently I installed programs such as Microsoft SQL Server 2008, anti-virus program (Sophos), which I think are necessary (the first was for my studies as well).

  Would appreciate any pointers to advise me if these could be the causes of the accident, and that I have to do to keep the better laptop or y at - it any generic deficiency maybe I should take notes.

  Thanks in advance for any advice for this laptop.
  Kind regards

  Hey,.

  First of all, I must say it is very difficult to say whether this problem is software or hardware related, but in most cases these accidents are caused by software or drivers...

  I put t know how many programs you have installed, what OS you use and if there are compatibility problems, but you can test it yourself: Toshiba start recovery disc recovery facility. After that, you have the same settings that you have purchased.

  You should examine it a little these parameters. If everything is ok, it was just a problem software or driver. ;)

• Win XP Pro SP3 - Validation problem

  Under XP Pro SP3 (w/Media Player 10) for the last 3 years. Trying to register my new Garmin GPS, says I need Meda Player 11. Tried to install MP11, met validation error. A ran MGADiag, said the invalid product key. I was in a maze without end of the screen trying to figure out how to solve this problem, but struck out. Can someone help out me of this mess? Thank you.

  There is NO valid key on any Windows drive - with the exception of the right brand OEM disc for your machine.

  Another key found in or on a disk is invalid.

  Are only valid keys (with the exception of Volume license keys)...

  (1) on the COA sticker on the case of the machine

  (2) on the label inside the packaging in which detail records (full or upgrade) are provided.

• Win XP PRO SP3 Corporate Edition license key

  Is there a different product key of 25 characters for Windows XP PRO SP3 Corporate edition for Win XP PRO in general?

  Thank you... DECENTARORA

  On Fri, 10 Sep 2010 14:24:04 + 0000, SirBarmy wrote:
   
   
  > On the contrary to what this nice gent posted on there is no Corporate editing, I'll tell you there is.
   
   
  You can say what you want to say, but that does not correct.
  It is and has never been, an edition of Windows XP called
  'Corporate Edition.' See below.
   
   
  > There is a very big difference in the product keys for Corporate/Home/Pro/Media Center. What often confuses a lot of people say there is no Enterprise edition or that it is a code name for a pirate software is the fact that it is an essentially the same as professional.
  >
  > Corporate differ regular professional is it's price, its availability to the general public and it is unique marketing to businesses.
   
   
  You talk about "Volume Licensing" of Windows XP
  Professional Edition. What you are saying is correct, except that your name
  for this volume license is incorrect. It is * not * called "Corporate".
  Edition' and the term 'Enterprise Edition' has been used almost exclusively
  for pirated copies.
   

  Ken Blake, Microsoft MVP

• Why is Win XP Pro SP3 computer get error 'no video with format supported or a MIME type found.

  I have a Windows XP Pro SP3 computer, and I get the error 'No video with format supported or a MIME type found.' When I try to watch videos in the browser. I used to be able to view the videos, but 3 months ago they stopped working and I started to receive the above error message. What could be the cause for it? Thanks a lot for your time and help! God bless you!

  Daffodil5 said

  The site "paperwishes.com" (card making supplies) plays videos of product for some of its products. A blue box shows the word 'Play' next to the item. When I clicked on this blue box last spring, he'd always play. He's now hit & miss. Sometimes, it will offer to play via MP4, but rarely. Their 'webisode' will play not (who played in the spring, as well). Cannot understand what has changed: Google update leaving Windows XP in the past?

  Videos on the site can be read with an HTML5 player and do not use the Flash Player Plugin like a video I cheacked used HTML5 player when I right click on it. Actually, it turns out the link video was a Youtube video and YT uses the HTML5 player when possible and descends to Flash Player if need be if they always support such.

  With a little work, you can get the video to work in Firefox on the old WinXP EOL of HTML5.

  http://www.MSFN.org/Board/topic/175591-enable-MP4-h264-AAC-HTML5-video-in-Firefox-on-Windows-XP-without-Flash/

• Windows 8 Pro - PAGE_FAULT_IN_NONPAGED_AREA (win32k.sys) - Blue Screen of Death

  Hello

  I get a blue screen with the following error: PAGE_FAULT_IN_NONPAGED_AREA (win32k.sys). This happens whenever I start. My computer will be turned on and be normal for the first five minutes, and then all of a sudden, I get this error.

  The computer I use is that I built myself. Here are some features:
  MSI - card mother B75A-G43
  -Processor Core Intel i5-3570
  -RAM Kingston 8G
  The computer is running Windows 8 Pro with Media Center (32 bit). I'm also using AVG Internet Security.
  I have not installed new hardware recently and the only software I had installed before this error was Adobe Reader XL
  Any help would be great.
  Thank you
  Vince

  http://www.Avg.com/us-en/utilities AVG Remover, I would like firstly, uninstall AVG, restart the computer, and then run the AVG Remover and restart another.     Try to run a day or so... on the default windows Defender.     AVG can be reinstalled quite simple if this is not the cause.

  Typically when its saying Page fault in nonpaged area... makes me think it could be bad memory, or some installed program writing to the wrong places.    Remove 1 stick of 4 GB? and swap to test each?

• Satellite C660-1TN. Win XP Pro SP3. GF 315 M graphics driver

  Laptop Satellite C660-1TN. In accordance with company standards, it is necessary to work in Windows XP Pro SP3. The NVIDIA® GeForce® 315M video card driver is not established. Thank you

  Your business standards are quite old. It should be time for a corporate update to the new standards. ;)

  Anyway, new models of laptops are not supported for older operating systems, and new models of laptops are designed for the new operating system. New laptop models have newer material designed also for newer operating system.

  Problem is not Toshiba or support for Windows XP Home edition. As far as I know even Microsoft doesn't support WXP more.

  Check if NVIDIA supports Windows XP Home for GeForce 315 M.

• HP PRO 3405 series MT * blue screen during installation *.

  Hello

  I tried to install Windows XP on this PC, but I get the blue screen during the installation. Instead, with windows 8 I can install.

  I need drive for controller? (F6 at startup)

  Hello:

  See if these drivers work.

  You will need a USB floppy drive to install on the line of F6. A USB flash drive does not work.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & cc = us & prodTypeId = 12454 & prodSeriesId = 4169006 & prodNameId = 4169007 & swEnvOID = 1093 & swLang = 13 & mode = 2 & taskId = 135 & swItem = vc-74977-1

  Now you have to extract the real drivers, you must copy and paste to your floppy drive.

  Download the free 7-zip file and use it to extract the files in the exe file you downloaded above.

  http://7-zip.org/download.html

  After having extracted the file, you will find the drivers in the folder of the driver.

  Open this folder and copy and paste the drivers inside this folder on your floppy drive.

  If this does not work, go into the BIOS and change sata from AHCI to IDE emulation and install windows like that.

  Then try to manually install the driver sata ahci by a manual update of the drive controller in Device Manager.

  If you install, you restart and back emulation sata AHCI in the BIOS, so the hard drive works better it will be in IDE mode.

• flashplayer18_ha_install.exe does not work on Win XP Pro SP3

  File 'flashplayer18_ha_install.exe' of the update causes error during execution.

  Adobe Download Manager has encountered a problem and needs to close...

  (Signature of error = AppName: flashplayer18_ha_install.exe)

  AppVer: 1.5.0.35

  ModName: flashplayer18_ha_install.exe

  ModVer: 1.5.0.35

  Offset: 000059db)

  The file "flashplayer18_ha_install.exe" = file version: 1.5.0.35s

  Installation file "install_flash_player.exe" works OK, but seems to install the same version outdated; 18.0.0.194.

  OS = MS Windows XP Pro SP3. 32 bits; Processor core

  Browser = Firefox 39.0

  Flash Player plugin version 18.0.0.194

  Hi klm2048,

  Setup Online does not work on some XP systems.  Investigation on the Installer team online.  In the meantime, please use the installer in offline mode, posted at the bottom of the problems Installation | Flash Player | Windows page in the section "problems".

  --

  Maria