Window scanning problem 8

Similar Questions

• M1212nf mfp scanning problem

  Scanning problem

  My printer recently started having problems with scanning.  I start a scan.  He is busy for a long time and then fails informing me that HP LaserJet Scan has stopped working.  When I type the guest Cancel Windows, the printer still displays the message "Scan to PC" forever.

  I tried everything, including the scanning print doctor PC, which fails also in the same way, reloading drivers, firmware etc.  Sometimes I get a message "unable to communicate with the printer.

  I can print and photocopy.  It is connected via USB.  No hardware problem does appear in Windows.

  Help?

  Hello

  A defective cable can affect much more than the impression, as scannign consumes much more energy to make the connection by comparing standard analysis printing.

  However, what happens when you try to scan from Windows Fax and Scan?

  I strongly suggest such a you already reinstalled the software and a bit checked any possibility that the relocation of the software already.

  Please let me know the results,

  Shlomi

• error 0X1C600C0F when running windows scanning

  I ran the windows scan and got an error message fixed this problem then when I tried the analysis allow to correct the problems, he found a new error message came 0X1C600C0F.  My computer problem is way beond me can someone help me I have a virus that won't let me do anything.  The warning that I can that see haf of what I write hope someone can make sense of it.  Thanks for any help

  > I ran the scan windows and received an error message fixed this problem

  Are you using Windows Live OneCare scan?
  If so, please repost in Windows Live OneCane anti-virus forum:

  http://social.Microsoft.com/forums/en/onecareanti-virus/threads . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Fax for Windows & scan has stopped working for me.

  Fax for Windows & scan has stopped working for me. I analyze the documents on there all the time and it just stopped working gives me an error message indicating "a problem prevented the document under analysis. Please try again, or to correct this information, see Help and Support or the documentation that came with the scanner. "However, the problem is not the scanner, because it works with a colleague's computer, and the scanner does not work with mine either. It is a problem with the Windows fax and scan. We have tried several things and nothing works. Help, please!

  Hi KristinVeltema,

  To resolve this problem, you must download and install windows vista service pack 2 on the computer.

  Learn how to install Windows Vista Service Pack 2 (SP2)

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  See the link below for more information:

  
  Error message when you try to import an image from a scanner by using "Windows Fax and Scan" or by using the Windows Photo Gallery in Windows Vista SP1: "a problem prevented the document under analysis.

  http://support.Microsoft.com/kb/953253

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite A135-S4527 - Windows encountered problem & fails to load

  At startup, Windows attempts to load, but I get the message Windows encountered problem communicating with a device. Windows does not load.
  Tried all attempts for load in SafeMode etc but no luck. Tried to load the Toshiba Recovery utility but still no luck.

  Fortunately the data is saved, but I have no recovery disks.

  How can I get the recovery disc for this machine for delivery here in the United Kingdom when it is a product of the USA?
  If the recovery discs can be ordered in the United States where to order? (I have an address to the United States for delivery if necessary).

  Hello

  As far as I know here in Europe, you will not be able to recovery media order for the laptop models to the United States. If you have a person in the United States, they must contact the nearest authorized service provider and order it for you. Later they send it to you.

  If you need to address and http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Repair&sn=false check phone numbers

  Good bye

• p6310f: Windows Update problem

  When you try to upgrade to windows 10 I received the error message 0 x 80080005 - 0 x 90016 after watching in Microsoft support forum, I found that the problem was related to windows 7 is not not to date. I checked and found that my computer has stopped udating a couple of years. I tried to run Fixit MS that has not worked. Tried to reboot (BITS) and got ERROR 126 (module not found) I then followed the instructions at https://support.microsoft.com/en-us/kb/2700567 on how to reset the Windows Update components. During the process, I have the following errors:

  Mshtml.DLL loaded, but the dllregisterserver entry point was not found.

  Shdocvw.dll "" ""

  browseui.dll   "                "                    "                     "

  MSXML.dll Module could not load make sure that binary is stored at the specified location the specified module could not be found.

  Actprxy.dll Failed is not found

  gpkcsp.dll        "        "           "             "

  initpki.dll          "           "                 "

  wuaueng1.dll"" "

  c:\windows\system32\dllcache\wucltui.dll"" "

  wuweb.dll      "            "           "              "

  muweb.dll    "            "              "            "

  I guess my question is what I have to do a restore of the system under windows 7, before I can upgrade to windows 10? Or y at - it another way?

  Hello glockrow ;
  
  Let me welcome you on the HP forums!
  
  I read your post about windows update problems and wanted to help.
  
  I would that be able to say that updating to Win10 was an exact science where we know exactly how he does it, and what it should - but the flooding of this and other instances of Win10 problem after that problem indicates that, at best, we are all guessing.

  So, I think, from what I've read and done on my PC, is that you SHOULD be able to avoid the problem of missing updates by updating using Win10 created using this MS link media: 10 Windows Installer using the media - Windows help authoring tool

  After you create the DVD or USB, NOT boot from it. Instead, insert it into your PC and, if it does not auto-start, right click on the file setup.exe and run it.

  HOWEVER - and this is important - PC Win7 have a rate low success updated Win10 without problem - primariluy lack of OEM Win10 drivers.  Typical problems include display artifacts (to cause to be obliged to use the driver for the card of Microsoft Basic), not wireless and touchpad problems.  The drivers Microsoft provides have only the most basic features, with none of the extras that the HP drivers bring to the stage.

  It is further complicated by the function Win10 GoBack, whereby you can return to your original operating system, being known to be unreliable. So when your upgrade machine malfunctioning, only then you discover that you cannot return the machine to work, that you had originally!

  You can protect yourself against ending up with a damaged machine - seriously considering using a free third-party product that works for airport Imaging/restoration - Macrium Reflect.
  
  Macrium reflect (MR) provides a FREE version that can be used to image and restore partitions or drives together.
  
  What I recommend is the following:
  (1) download and install Macrium reflect (MR)
  (2) run M. and choose the option: "Create an image of the partition (s) required to backup and restore Windows" to write a full backup to an external drive or USB key
  (3) use the option to create a CD or a USB startup key
  
  NOW, you have the means to restore a full system that works for the external hard drive or USB key in a few minutes.
  
  So now you can recharge before with the upgrade, knowing that whatever happens, you will be able to return to your currently works in a few minutes.
  
  Good luck

  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• Windows 7 - problem 'says that my laptop was inconsistent.

  Original title: Windows 7 problem.

  At this moment, I have problems with Microsoft. A message to see if my laptop was ready for Windows 7. When I tried another message came to say that my laptop was inconsistent and that I should check my internet and try again later. My internet is OK. Please help me, I'm missing out on a lot.

  Hello

  Start the computer in safe mode with network, run Windows 7 Upgrade Advisor and check the status of the issue.

  To start the computer in safe mode with network.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Please let us know if you need more assistance.

• Error Windows Update problem "don't shut down your computer updates being configured"

  OT: Windows Update problem.

  Why should I continue to get the message ' don't shut down your computer updates being configured "where all the updates seem to have been installed?

  Start here (ignore the title): http://support.microsoft.com/kb/949358

• When using windows scan & fax tool I get: _ 'network processing timed out. Check the scanner settings & network"error

  I am running Vista ultimate on 64-bit computer with a Linksys WRT310n router in LAN mode. I also have a Canon MF4370dn printer that prints screen & documents ok. I can see the printer on the network.

  I'm mainly interested in the function of scan here.
  With the mf scanner set to scan mode of network (according to Canon), I opened the Windows scan & fax tool, I select the WIA Canon scangear printer/scanner/fax to network & I get a panel where you select dpi/jpeg/bmp etc. When I select the function preview or scan I get an error message that says "network timed out treatment. Check the settings of the scanner & network.

  I read a lot of sour comments on the analysis of the network of this machine. It's a shame, because it is a machine of great, fast & compact mono laser. I have disabled the firewall of the router, still no go. I also tried the rout USB with software to reinstall with network for others, printing & for my machine but italways deferred to the network on mine with the same error message.

  I also read where it analyzes only at 300 dpi... so with all these pros & cons I decided to get a good, dedicated, scan that will probably better results of the scanner anyway.

  Thank you for all the good sites & info you have provided.

  Newbie.

• KB2676562 error 80070490 Windows update problem

  original title: Windows Update problem

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  I'm unable to install the "Security Update for Windows Vista (KB2676562)."  I get the error "80070490."   I tried everything, including the "fix for Windows (KB947821)" and "Automatic troubleshooting" that incorrectly shows that the problem has been corrected.

  Have you tried everything in this article: http://support.microsoft.com/kb/958044

  Method 1: run (Checksur.exe) system update readiness tool

  If this method does not resolve the problem, go to method 2.

  Method 2: perform a Windows repair installation

• Active window color problem - cannot change the background color

  original title: Active window color problem

  By right-clicking: Desktop, then click on: personalization / window color and appearance / settings (Advanced) appearance, Windows user can assign a background color of the active window in any application.  This is useful for those of us who don't want a stark white screen; We can assign a mild pastel tint which may be easier on the eyes for long term sessions.

  At some recent point, I lost the background color of the active window within Windows uses 'household.  I still not my background color assigned in any application I run (Word, Mail, etc.), but using Windows Explorer to navigate through my hard drive, the active window is now always the default stark white Windows.  How this change and can it be forced to adhere to the assigned active window background color?

  Hello

  Step 1: Check if the problem continues in a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-user-account

  Step 2: If the problem does not persist in a new user account, then the old profile could have been corrupted. Try the following article to fix a corrupted user profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• When I try to use the Skype window having problem

  When I try to use the Skype window having problem

  Hello

  you don't say what problem?

  and if the problem only occurs when using Skype, ask the Support of Skype

  https://support.Skype.com/en/

• C5580 - scanning problems - how to scan?

  When I press the Scan button on my all-in-one, it is said: "scanning problem: try running the scan of the computer." Refer to the documentation for more information. »

  But how to scan from my computer? I open the HP Solution Center, and the only option is 'Print of Photos' or 'Share of Photos.'

  This article tells me to go to the "analysis settings" in the HP Solution Center. I have no "analysis settings" in the HP Solution Center. If I click on settings, I get the print settings and other settings (which resemble internet connection parameters)

  http://support.HP.com/us-en/document/c01391654

  I'm on Vista Home Premium and I connect to my C5580 Bluetooth. Fine, I can print. Just can not scan to the computer. However, I can scan to a SD card.

  Any suggestions?

  Seems that you have connected the printer using Connectivity Bluetooth.Bluetooth is only for printing and scanning will not work. You will need to connect to the printer with the USB cable to analyze correctly.

• Windows & scan fax

  I can't get the fax works on my windows scan.i fax followed the instructions so many times and nothing happens.according to the instrustions, all I have to do is plug it into a phone line and track setting up wizard.i have done so many times and still can not do same work.i bought a modem fax but nothing happens.am I guess that to get a fax # of my internet service provider , are they suppose to connect some how.no seems to know what to do! Please help me someone!

  What are you using to do the scanning and faxing with?

  You use a printer all-in-one, which makes Fax, scan, copy and print or simply using fax/scan program in Windows by itself?

  Everything for what you are wanting to do has the installation software.

  If you are simply wanting to send a fax to someone, you just dial the fax number, you send.

  When you are prompted for your fax number, just use your home phone number.

• Windows Update problem - 0 * 80070005

  * Original title: windows update problem

  I'm not get windows updates.so I run the program update troubleshooter.in windows he showed the error of update problem as... windows 0 * 80070005 (2016_05_17_T_06_03_42P) .and this problem was not fixed. and again, I have no answer answer.pl.

  First of all

  KB3138612 would be the last for a manual installation

  The first would actually KB3145739

  Homepage for all versions,

  https://TechNet.Microsoft.com/library/security/MS16-039

  After that you manually install you KB3153199

  I would also like to before doing this,

  Be sure and go to uninstall a program and see which Microsoft Net framework you have installed.

  4.5.2 is more consistent to have installed,

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=42642