Windows 10 Ent 64 Build Base: Unable to detect the system for capturing diameter drive

Similar Questions

• My Windows Vista laptop (dv9000 HP) is unable to update the drivers for the drive DVD-cannot use the device.

  The above mentioned laptop displays error Code 39 in Device Manager. I tried to remove the device and scan for hardware, but not able to download the drivers needed to use the device. Help, please. Thanks to you all.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  There are many causes of Code 39 errors in Device Manager:

  a. a required device driver is missing.

  b. a required binary file is corrupt.

  c. There is a problem with the file I/O process.

  (d) a pilot that refers to an entry point in another binary file cannot load.

  The recommended solution is to remove the device and reinstall the drivers for this device. As you have tried this step, I suggest you to try the steps mentioned below and check:

  Step 1:

  Try the fixit mentioned first and check if the dvd player works:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Step 2:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  The CD drive or the DVD drive does not work as expected on a computer that is running Windows Vista

  http://support.Microsoft.com/kb/929461

  Step 3:

  Try the steps in the following link and check if the dvd player works:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If you have any questions do not hesitate to answer, we would be happy to help.

• Want J010dx m7: windows will not start until after full recovery of the system with new HARD drive

  Hello world

  I need help here.

  My HP envy m7 J010dx works perfectly with my original hard drive (1 TB).

  I am preparing a second HDD (NEW 320) as backup.

  I took off the Moose HDD (1 TB) and replace it with the NEW HARD drive (320GB) and try to do a full recovery of the system with the HP recovery DVD.

  After full system recovery and laptop computer needs to be restarted in order to continue, the laptop keeps restarting on the logo of windows 8.

  I think it says device not found Boot. Also a test using the UEFI tool material HP and all pass.

  Replacing the NEW HARD drive with the original of the old HARD drive and it start normally.

  What can go wrong here in this case? Thank you very much for the help.

  Concerning

  John

  OK, I read through the thread and this is my point of view on this based on works including restore process with the user created a recovery (UCRDs) media which the user indicated that they used.

  If you just want to jump to the conclusion at the bottom, you can see my opinion. If you want to know 'why' Please read the entire post.

  Model No.: m7-j010dx

  Product #: E0K83UA #ABA

  Ships OS: Windows 8 (64-bit)

  Recovery HP part No. Kit: 730336-002 (3 DVDs + extra)

  User replaced the HARD drive with a 1 TB hard drive 5400 RPM with HP ProtectSmart hard drive Protection a new hard drive is a Seagate Momentus 7200.4 ST9320423AS 320 GB 7200 RPM 16 MB Cache SATA 3.0 GB / s 2.5 "Notebook internal hard drive.

  With the help of UCRDs sent media recovery media (SSRDs):

  When the UCRDs are created, only the drivers for the HW operation (this is a critical point, that I will look later) are burned to the user created a recovery media.  Consider this a snapshot of the current HW, the base drivers and software applications.   If you change the HW on your laptop or desktop where the additional device requires a different driver for these features, a few questions you might - recovery process could stop because he can't find the right driver, a blue screen, a lack of start-up or other unstable system.

  A few years ago, I had a PC that would not recover because the Blu - ray (ODD) optical disk drive did not work.  I replaced the WEIRD Blu - ray with a generic DVD/CD burner into the new part of Blu - ray is presented.   I got the PC using SSRDs thinking I would put some time and just install the Blu - ray after the PC has been recovered.   The PC recovered and when the new Blu - ray showed I installed the unit and guess what?  All PCs have shown in Device Manager and applications was a generic ODD - no Blu - ray capability and ability to read Blu - ray content in the default HP provided for multimedia applications delivered with the PC.  Applications were there but no Blu - ray capability.

  Huh?  It looks that I did not put any time at all.

  I inserted the new Blu - ray ODD and distributed recovery with the HP SSRDs.

  After recovery, I had all the Blu - ray drivers and applications supported Blu - ray.

  The difference between UCRDs and SSRDs:

  UCRDs provide a glimpse of what is installed and functional both disks are created.

  Version Digest of the player on what is happening with SSRDs to retrieve a PC (before Windows 10):

  SSRDs have all the drivers for all the HW and SW qualified for the unit.  There may be several drivers for hard drives, different types/screen resolutions, sides, etc.  Based on the characteristics of the specific laptop / desktop a process is run called "Do / don't.   After entering the recovery SDRD, the Notebook media boots to Recovery Manager.  The first step is a raw copy of all the contents of the disc on a temporary partition.  Following the Do / do not process looks at the characteristics of this specific unit and remove all other drivers and applications not used by this device.  Drivers and the only successful applications are the features supported.   And then, the new operating system and recovery partition is created.   The PC end recovery of cleaning process and restart the laptop / desktop. And, Yes, you guessed it, if you create the user created a recovery media, you only have the drivers for HW devices and applications of HP on the PC at the time.

  So, that being said, what could be the cause/solution?

  Hard drives can be different enough so that a different driver (not the UCRDs) is necessary for the newly installed HW.

  The SSRDs are supported on the new HARD drive installed?

  I don't know, I have an office boy, and I have not tried on this model of laptop.

  If you have / acquire SSRDs, I recover the laptop with the new installed HARD drive and see if it works.  It may or may not.  I don't know what drives were qualified for this laptop.

  If this does not work, the last option is cloning via USB connection (old HARD drive in the PC, new HARD drive connected to a USB 3 via the SATA Adapter (dongle) USB port, install or download software cloning and cloning the old HDD to the new.)   I just did this on the two older Windows 7 computers laptops using a SanDisk Ultra kit.  He has worked on both units.

  Conclusion:

  I don't think that the problem is caused from a HARD drive of 1 to a 320 GB HARD drive, as it meets the minimum specs for a complete installation.  I think the problem is related to the use of UCRDs to retrieve and the UCRDs do not have the HARD driver/firmware/application disc.

  But then again, I know.

  I am an employee of HP...

• front usb ports are unable to detect the large capacity external hard drive (250 GB)

  Hello
  I have 250 GB external hard drive, whenever I connect to my front usb ports it detected, but pen drives, are to detect flash drives, one of my friends said that you need to update my bios & I here is the motherboard.

  motherboard: Mercury 945gcm

  It is possible that the USB 1.1 and not 2.0 ports that can explain the problem.  In addition, sometimes USB ports out enough power to run an external device that is not powered separatelly.  I don't know if updating the BIOS will help, but if there is an update available for your system (and it MUST be for your system - big bad can occur if you install the wrong BIOS so get with the computer manufacturer, and speak to a representative to confirm that they are appropriate for your system AND your version of Vista) then by all means install it and see if that solves the problem.  You can also get the updated drivers for the motherboard manufacturer, at the same time and see if that helps as well.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• laptop computer (HDD 320GB) with windows 7-64 bit OS.iam unable to shrink the drive c less than 155 GB

  Hello Sir,

  recently I bought the laptop (320GB hard drive) with windows 7-64 bit OS.iam unable to shrink less than 155 GB c drive please help me. I want to reduce this to 90 GB

  Its also the case that win7 takes only supported 4 basic partitions and you can't mention what Disk Management displays for drive 0.

  And also if a pre-installed version of victory, if you manage to create partitions and at a later date, you will need to use your recovery disks, that may well destroy all created partitions.

  For what reason you want to partition?

• RDPCLIP. EXE missing startup file (system32 dir). Unable to restore the system because of missing file unspecified.

  Windows 7 (new machine, not updated). Autoruns shows this file RDPCLIP. EXE be found at startup. This file is usually located in the System32folder. Unable to restore the system of time earlier because of unspecified missing file (rdpclip.exe?). System seems to be runnuing normally except these two questions. Occasional freezes (once just by renaming the downloads folder). How can I get
  new file restored to the version of Windows 7?

  Note: CLIP.exe is in the System32 directory.

  Hi bigdome6984,

  If your machine acts as a Terminal Server, i.e. someone else connects to your computer using remote desktop, then rdpclip.exe will be loaded on your computer as part of the functionality of Server Terminal Server.

  RDSCLIP is loaded on the computer, allowing other machines to connect via Remote Desktop.

  It should be found at the following registry location:

  HKLM\SYSTEM\CurrentControlset\Control\Terminal Server\Wds\rdpwd\StartupPrograms

  Important Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756

  I hope this helps!

  Kind regards
  Gokul - Microsoft Support

• Oracle Forms Win 7 64 - bit error INST-07407: unable to detect the platform of the machine or pieces of JVM

  
  I'll try to install Oracle Forms 11.1.2.0 on Win 7 64 bit and get INST-07407: unable to detect the platform of the machine or the pieces of the JVM.

  I followed the steps described in Oracle Forms 11.1.2.0 on Win 7 64 - bit bit JVM error but still unable to solve my problem.

  Here are the details of the version of the installed JDK.

  C:\Program Files\Java\jdk1.6.0_45 > java-version

  Java version "1.6.0_45".

  Java (TM) SE Runtime Environment (build 1.6.0_45 - b06)

  Java for 64-bit Server VM (build 20.45 - b01, mixed mode)

  C:\Program Files\Java\jdk1.6.0_45 > % java_home Echo%
  C:\Program Files\Java\jdk1.6.0_45

  C:\Program Files\Java\jdk1.6.0_45 > echo %path%
  C:\Windows\System32; C:\Windows; C:\Windows\System32\Wbem; C:\Windows; C:\Program Fi
  les\Java\jdk1.6.0_45\bin

  Installer: -.

  1 jdk-6u45-windows - x 64

  2 wls1036_generic.jar for 64-bit platform

  3 ofm_frmrpts_win_11.1.2.0.0_64_disk1_1of1

  Please advise. Thank you.

  I don't know if help.

  I have installed Oracle Forms 11 g on Windows Vista Home Edition (64-bit), had been an experience horrible (much testing), although eventually I got.

  If I'm not mistaken, I used this guide:

  Oracle WebLogic & Forms 11g Release 2 installation guide

• Unable to run the system restore, or any audio file...

  I am unable to run the system in normal mode or safe restore.  When I try to run rstrui.exe a pop up box appears and wants to know what program I want to run this file.  Also when I go to my control panel I can't open anything even not my add or remove channels I get an error msg saying c:\windows\system32\rundll32.exe - application not found - even when im in safe mode appears the same box... help would be appreciated... :-)

  It sounds like you lost the file association for .exe files.
  Visit the following site and follow the instructions to restore your .exe file associations.  Be sure to read the note at the top that applies specifically to the .exe file associations:

  <>http://www.dougknox.com/XP/file_assoc.htm >

  HTH,
  JW

• "Unable to make the system restore point", when I ran registry cleaner Norton

  I just installed Norton 360 on the desktop with Windows Vista Home Premium OS. When I ran the registry cleaner, the error message appeared saying: "Unable to do the system restore point" . I contacted Norton, but they said it's nothing to do with Norton, I need to contact Microsoft. In addition, as suggested in one of your responces, I tried to create manually restore point, but I don't see the system protection tab on my system properties pop-up screen.

  I just installed Norton 360 on the desktop with Windows Vista Home Premium OS. When I ran the registry cleaner, the error message appeared saying: "Unable to do the system restore point" . I contacted Norton, but they said it's nothing to do with Norton, I need to contact Microsoft. In addition, as suggested in one of your responces, I tried to create manually restore point, but I don't see the system protection tab on my system properties pop-up screen.

  I don't know what prompted to run registry cleaner. I would sincerely say that you read the following article first before you take back this terrible task to play with the registry.
  Why you should not run registry cleaner:
  http://www.edbott.com/weblog/?p=643

  Here is the tutorial on how to create a system restore point:
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  t-4-2

• Specifications of the system for Windows 10 technical overview?

  Greetings,

  So guys, I thought install Win10 Technical Preview (to get in touch with this new update coming) in my pc, but then I thought since I is not such a great pc, since a player im, win10 will use more my RAM and turn my pc slower?

  Thank you.

  Can I upgrade my existing version of Windows to Windows 10?

  Given that Microsoft made available the first version of the preliminary version of Windows 10 in early October 2014, there was a misunderstanding that this is not a product you use to replace a facility for production of Windows such as Windows 8 or 7 or Vista. On the other hand, if you test it on one machine, the best recommendation is to create a partition or have a spare ready hard drive where you can install it. Windows 10 in its current state of the pre-release will expire, and at the same time, it's unfinished work. So if you need to evaluate it, the best way is by installing it next to your commercial installation of Windows.

  If you choose to upgrade your existing Windows to Windows 10 version, please be warned, it will make your recovery in functional partition, requiring to have separate recovery media to reinstall if necessary.

  Where can I get more information about the preparation of my computer safely for Windows 10 tests?

  • How to install the latest version of Windows 10
  • How to: create a Local account during out-of-box installation experience

  How to dual boot, the latest version of Windows built with earlier versions of Windows

  • How to: build 10 tips before installing the latest version of Windows 10
  • How to configure a virtual machine using the Hyper-V technology

  How to migrate Windows 10 Preview release: Dual Boot to install and protect the accumulated data

  • How to: Reinstall or restore your original Windows installation after reviewing previews of 10 Windows

  Backup your current Windows installation. Because you will make important changes on your computer, you should always back up before doing so. It is strongly recommended! See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

• I'm unable to install the drivers for the Intel CS630 PC camera for windows7 64-bit?

  I'm unable to install the drivers for the Intel CS630 PC camera for windows7 64-bit?

  If it's a camera for INTEL it website should have the good

  64-bit to Win 7 64 bit software.

  Some older hardware will not work on newer 64-bit systems.

  check your websites of manufacturers of games for win7 64 bit compatibility.

  Try your game in compatibility mode in Windows 7.

  to say the least there are a huge amount of games and

  software that works fine with Win7 64-bit.

• Mirage Management Server installation 5.1 - "unable to validate the permissions for this user account.

  I'm installing Horizon Mirage 5.1 server on a Windows Server 2012 R2 VM management. The SQL is located on a Server R2 VM with SQL 2012 2012. We have created a Mirage service account that has permissions of db_creator on the SQL Server. When we run the installation wizard we get the "unable to validate the permissions for this user account. Unable to connect to the database. The control server name, the name and server instance parameters"error message. We tried to make the local admin of the SQL server service account and the Mirage Mgmt server. We tried you identifying as service account and by running Setup in this way. Windows Firewall is disabled on both virtual machines. When we enter the SQL Server name and the instance use < servername > without an instance because it is an unnamed instance. Does anyone have other ideas? Cannot find much out there for KB articles. I'll open evidence of the support if it takes too long to understand.

  The service account, we created had a "database default" set in SQL. We chose the database and he continued as planned.

• Kodak esp5250 printer 3520 error code unable to detect the edges of paper

  error code Kodak esp5250 printer 3520 unable to detect the edge of the paper?

  Please see

  http://support.en.kodak.co.uk/app/answers/detail/a_id/25352/kw/3520/selected/true .

• From Windows 8.1 to Windows 7, my HP Pavilion e101sl 17 laptop lost the drivers for USB

  Hello guys, from 8.1 to Windows to Windows 7, my laptop HP Pavilion 17-e101sl lost the drivers for the USB controller, USB3 does not work, can someone help me please, thanks in advance

  Hello:

  Here is the link for the usb driver 3, you must...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-127803-1&cc=us&DLC=en&LC=en&OS=4063&product=6521489&sw_lang=

  Here's how to get the graphics to work when using W7 x 64...

  1 install the Intel chipset driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=816&DwnldID=20775&keyword=chipset+ins...

  2. install the Intel graphics driver and restart.

  https://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&DwnldID=23714&lang=eng&OSVersion=Windows%207...

  3. download and install MS .NET Framework 4.0.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=17851

  4. download and install the latest amd catalyst driver beta.

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

• HP PhotoSmart C4450 All in One Printer is unable to detect the alignment (tried everything) page

  My question is very simple. I tried all the options I could think for my printer detect the alignment page and it is still unable to detect the page. Can someone who has had the same problem please send me a list of recommended procedures to solve the problem? I intend to go through one by one until it is resolved. The post that I found with this exact topic didn't have a sufficient response that other that the user placed a bunch of papers on the page alignment and the printer worked... Could really use some help, my patience is pretty much exhausted. I use a MAC Leopard operating system. Thank you.

  Hi drubio1989,

  What are the levels of ink in each cartridge?  I connected a troubleshooting document that addresses the lack of alignment.  Click here  You could take a look and perform one of the steps that you did not.  Let me know how it goes.

  Good luck!