Windows 10 has crashed during extraction AE CC 2015.

Similar Questions

• Windows Vista has crashed, "the operating system not found" error, can I load Windows XP on a partition?

  I have an Acer Aspire 5516, with pre-installed Windows Vista. I didn't know that it did not come with a recovery disk UNTIL my system crashed! During a routine virus scan, I got a blue screen saying a major problem has been found and the system has been shut down. I followed the instructions to gracefully shut down my laptop. When I turned this back on after the "Acer" logo he went to a black screen with info on my computer and the last line States "not found operating system". That's when I discovered there was no recovery disc & it is integrated into the system. To access this system you we F8 to enter safe mode, then Alt F10 to access 'erecovery management system. Neither one of these functions operate! Still getting the black screen with "operating system" not found I have a Windows XP my laptop previous. What I was wondering is if I can load on my Acer, possibly on a partition, in order to be able to get into my laptop and save all of my files? I'm terrified of losing everything I have! I have thousands of pictures that I can't replace. If anyone can help please do! I am on a very limited income & can not really afford professional help. Thank you very much in advance!

  Hello

  normally with an Acer you press Alt + F10 at startup to start the hidden recovery partition recovery, not F8, then this combo

  but you do not have an option to save your data, that

  in daily use acers normally have a system partition, a partition of data to save your data, etc. to and also this hidden partition recovery

  and read this on data recovery, too;

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method 3 depends on your hardware in the computer that failed

  read this information about method 3:

  http://www.Knopper.NET/Knoppix/index-en.html

  Download/save the file Knoppix Live CD ISO above.

  http://isorecorder.alexfeinman.com/isorecorder.htm

  Download the Vista software from the link above.

  After installing above ISO burning software, right click on the Knoppix ISO file > copy the Image to a CD.

  Knoppix is not installed on your PC; use only the resources of your PC, RAM, graphics etc.

  Change the boot order in YOUR computer/laptop to the CD/DVD Drive 1 in the boot order.

  Plug a Flash Drive/Memory Stick, BOOT with the Live CD, and you should be able to read the hard drive.

  When the desktop loads, you will see at least two drive hard icons on the desktop (one for your hard drive) and one for the USB key.

  Click on the icons of hard drive to open and to understand which drive is which.

  Click the icon for the USB drive and click on "Actions > Change the read/write mode" so you can write to disk (it is read-only by default for security reasons).

  Now to find the files you want to back up, just drag and drop them on the USB. When you're done, shut down the system and remove the USB key.

• Windows Media Center crashes during installation

  Help, please

  I have a Packard Bell with XP media Center Edition (2005 I think), it has recently been completely formatted and Windows re-installed by a company.

  It's only now (6 months later) I have bypass actually set up the Media Center.

  Here's what happens:

  When he asks me to "choose a provider of TV services", I choose one and click "next"...

  Then it crashes just forever.

  The program is still ongoing, but after a short while I get a black screen and nothing happens.

  Windows still works fine.

  Someone help me please

  Ant

  I have remove Microsoft framework 4 as suggested in a post about a similar problem, but nothing has changed

  Hello

  Some USB TV tuners that were included with Windows XP Media Center Edition 2004 systems do not have a unique serial ID. You may experience this problem if you use one of these TV tuners and its driver with Windows XP Media Center 2005. If your computer has been upgraded to Windows XP Media Center Edition 2005 from Microsoft Windows XP Media Center Edition 2004, you can solve the problem by installing the latest driver for your TV tuner. Contact your hardware manufacturer to determine the existence of a Media Center 2005 compatible device driver for your TV tuner.

  For more information about your hardware manufacturer, visit the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us

  It will be useful.

• I used email TB. My Windows 10 has crashed and had to be reimagee. I reinstalled TB. How can I get my old emails in my new installation of tuberculosis?

  I used TB on system W10, very well. MS has pushed an upgrade for W10 and it totally screwed my system. I had to reimage my system with W10. That worked well, was supposed to keep my data but amazed my programs. This turned out to be true that I reinstalled my programs and data for them were always there. I reinstalled TB, has functioned well, currently able to download all new emails, but I can't find my old emails or my old profile name. Can someone tell me where to look my old data, if by chance its still there? I guess that's all my data was still there, but you never know people with MS.

  OK, think about it. Old profile is located in the Windows.old folder. You can move your old profile from the windows.old folder and place it in the current profile folder, and then go and change your profiles.ini and remove your new profile name and enter in your old profile name, then restart TB. Worked like a champ.

• My DVD burner has crashed during the creation of media recovery disks.

  HP Pavilion p7 - 1269c using Windows 7 Home premium desktop PC. How to reset the creation process so the Recovery Manager will allow me to start over again?

  As far as I know, you don't reset the creative process. If the HP Recovery Manager thinks that he has created a set of discs, it's done. Please contact HP and ask for a free set of disks. Explain your situation to them.

• 15 - F023WM: Windows 10 has crashed will not work work or reset

  I'm trying to fix my computer nephew he had an error and received a message asking to restart the computer after a reboot the computer would no longer work. And it does not start. All you get is the HP symbol on the screen the screen goes black and in the HP symbol comes back again it seems to be stuck in a loop.

  The computer is an HP 15-F023WM refurbished with windows installed 10. I tried using the reset under F11 option. Received the message to insert the windows installation or retrieve media. Downloaded a copy of 10 of Microsoft windows. "Inserted the burned copy of windows 10 then I get the message" there was a problem of reset your PC. "I then tried to do a clean install, but the computer will not start up CD/DVD. Went to the modified bios boot order to boot from CD first still does not start. Restarted tapped the ESC key to enter typed boot menu the F9 key to enter the boot device options. The only options they come are OS boot manager (UEFI) and boot from the file of EFI. Tried to disable secure boot but still get the same results. Any help would be appreciated that he must use the laptop for school.

  After setting start secure in the Bios and turn on the traditional way for the 4th time, he decided to work. I was able to boot from the cd and reinstalled windows 10.

  Thank you for your help

• Windows Media Center crashes during live TV

  I've been running Windows 7 WMC with a USB from Hauppauge 950 Q tuner for a while, with no real problem. Recently (in the last month or almost), I noticed that I get one or both of the following errors when I try to view live TV:

  No antenna located for this tuner or

  Low error

  I reinstalled the latest drivers for the Hauppauge, as well as the latest version of WinTV 7. The same mistakes occur in WinTV 7.

  Help, please.

  I've been running Windows 7 WMC with a USB from Hauppauge 950 Q tuner for a while, with no real problem. Recently (in the last month or almost), I noticed that I get one or both of the following errors when I try to view live TV:

  No antenna located for this tuner or

  Low error

  I reinstalled the latest drivers for the Hauppauge, as well as the latest version of WinTV 7. The same mistakes occur in WinTV 7.

  Help, please.

  Please review the following article: -.

  KB article

• HP20: Windows Explorer has stopped working, followed by windows explore restarts

  Hello everyone, a few days my computer began to behave strangely. When you try to download some pictures using Chrome, windows Explorer has crashed, and a pop-up will appear showing the message: "Windows Explorer has stopped working". A few seconds after that, the entire desktop up-to-date and another window poped by displaying "Windows Explorer restarts... ».

  The cycle of two windows appearing repeatedly. I restarted the computer as soon as it shows the office, the same thing happens again, to infinity.

  I was able to restart the computer by using the security mode, it works just fine. I've disabled most of the software at startup, except 360 total security anti virus. It has not solved the problem.

  Does anyone have a solution for this? Thank you very much for any help!

  Matheus

  Hi old_geekster, I tried what you said and it did not work. However, I then found the original source of microsoft where you got this info from, and they mention here on a corrupted video driver as a source as possible. That was the problem in my case: radeon tried to update earlier this week, but I was in a hurry and it did not properly. I tried again and it worked now!

  Thnaks for your help, even if not exactly what I needed, it solved my problem!

• WMP CRASHES DURING PLAYBACK HD VIDEO

  Mr PRESIDENT, windows media player crashes during playback of 720 p video file type, it becomes white and gray Tower then program stop. and when I open any window during playback of video file, the video hangs.   microsoft patch i run tool for wmp, it detects splitter media halli causes the crash of wmp and the internet. It disables halli splitter. but can not remove it. I installed not separately halli media splitter, or matroska splitter. It is present in the rundll32.exe file. Since it is a system file, how can I remove it? syystem to fail. I installed k - lite codec pack full 5 , how can I solve this problem? Please help me.                                                                                       OS --win 7 home top 32-bit sp1 dell inspiron 15r n5010 quick heal total security

  Hi Somnathroy,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem, Windows Media Player crashes when playing HD video files.

  I appreciate your efforts try the troubleshooting steps to resolve the problem. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.

  Is - it blocks the Windows Media Player only when trying to play a file individual or other files too?

  This problem can occur if the video adapter driver is outdated, corrupted because Windows Media Player or hardware video acceleration settings.

  Method 1:
  I suggest you install the latest video card driver from the manufacturer's Web site and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:
  If the problem persists, I suggest you try to reduce (or turn off) the hardware video acceleration. Check if it helps.

  a. open the screen resolution by clicking on the Start button.

  b. click Control Panel , and then under appearance and personalization , click adjust screen resolution.

  d. click Advanced settings , click the Troubleshooting tab.

  e. click on change settings.

  Note: some video card drivers do not allow to change settings.

  f. move the hardware acceleration slider to zero to reduce or turn off video hardware acceleration.

  Method 3:

  If the problem persists, I suggest to uninstall and reinstall Windows Media Player.

  Step 1:
  Uninstalling Windows Media Player:
  

  a. go to Start and in the search type "Turn Windows features on or off".
  b. click on "turn Windows features on or off". ""
  c. navigate to the features of media and uncheck the brand in the face of Windows Media Player.
  d. restart the computer

  Step 2:
  Reinstall Windows Media Player:

  
  a. go to Start and in the search type "Turn Windows features on or off".
  b. click on "Turn Windows features on or off".
  c. navigate to the multimedia functions and place a check mark in the face of Windows Media Player.
  d. restart the computer.

  Check out the link:

  Turn Windows or turn off features of
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

  Check out the link for more information.

  Play an audio or video file: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/play-an-audio-or-video-file-frequently-asked-questions

  Let us know the status of the issue after you perform the troubleshooting steps. If you need help or information about the issue with Windows Media Player, I'll be happy to help you. We, at tender Microsoft to excellence.

• Satellite Pro A100 crashed during Windows BIOS upgrade, now does not start.

  Satellite Pro A100 crashed during the upgrade of the bios from windows (upgrade the bios using windows), now the laptop will not boot. I press the on switch and it gives me just a blank screen, so I think that resets itself. I really need help solving this because I have a University paper due in the next few days and I need my laptop!
  Close for any help.

  It's a scream! :_| : O

  This looks like a damage ROM module!
  How did you do the BIOS update? I have red in this forum that a wrong procedure or wrong BIOS can damage the motherboard.

  I think that it s a deal. I put t know if it s needed to change the entire motherboard or update the BIOS again but I n t think you will be able to do it yourself.

  I think the best way is to ask the Toshiba service partner in your country.
  I think they'll give you more details on the handling of the Fryer

• I don't like to upgrade Windows XP to Windows 7, because I'm blue screen/crash during the upgrade but the upgrade Windows XP to Windows Vista does not crash during the upgrade!

  I have my computer to another, here my specs:

  Intel Core 2 Duo
  Hard drive 500 GB
  2 GB OF RAM
  DVD player
  Floppy Disk
  The operating system that is running Genuine Windows XP Professional Service Pack 3 and just upgraded Windows 7 (but I know before upgrading Windows 7) and keep the blue screen / Crash when upgrading to Windows 7. but the upgrade Windows XP to Windows Vista is not blue screen/crash during the upgrade.
  Is anyone to upgrade from earlier version of Windows to Windows 7 without crashing and spending fortune?

  Hello

  1 did you change on your computer before this problem?

  2. What is the blue stop screen error message?

  3. When you receive a blue screen during the upgrade?

  You can follow the suggestions and then check.

  Method 1

  Disconnect external devices connected to the computer?

  Method 2

  You can read the article and then check.

  Upgrade Windows XP to Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/help/upgrading-from-Windows-XP-to-Windows-7

  See also:

  Windows 7 Upgrade and Migration Guide

  http://TechNet.Microsoft.com/en-us/library/dd446674 (v = ws.10) .aspx

• Computer crashed during a windows XP update

  I was trying to trouble shoot a problem with a computer that would crash intermittently from time to time.  Put 3 downloaded system update for installation.  I put out of service and some updates to try to make sure I had the latest files.  When installing on 3/3, the system crashed again!  I knew it wasn't good.  I was not able to restart the system.  When I boot it comes up with the windows logo and progress bar, then it stops with a blue screen and the following message.

  Stop: c000021a {fatal system error} the System Manager system initialization process ended unexpectedly with the State 0xc000026c (0x00000000 0x00000000).  The system has been shut down.

  Is there anyway I can recover from this situation.

  I tried to boot from the start with F8 menu.  I chose restore to the last known good state, but not luck.  Are there any other suggestions out there.  XP was preinstalled on the Dell computer.  I is not a MS installation disc, but have the Dell restore disc.  I resisted using it because I think he goes back to the initial state of the computer and I will rebuild the system from scratch.  Inplace installation is a good solution or it just will make worse?  Any help from anyone would be greatly appreciated.  Thank you. -Nat

  ========================
  Additional information:
  I wanted to just make sure that people know that I don't mean to solve the reason for which the computer crashed.  I just try to understand if there is a way to recover a Windows update that crashes, power losses, or breaks down before installation, updates is complete.  Thank you.

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.WindowsXP.General

  Above is a link to the XP Newsgroups.

  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.windowsupdate&cat=en_us_d99bb655-a5d5-4C07-bdb0-90caf9f30c42&lang=en&CR=us

  And Windows Update newsgroup.

  You are in the Vista update Forum.

  See you soon. Mick Murphy - Microsoft partner

• I can't install programs on Windows 7, ERROR: 1601 has occurred during installation

  I can't install programs on Windows 7, ERROR: 1601 has occurred during installation

  Run the Windows Installer Cleanup utility, and then try to install a program:

  How to resolve common "Windows Installer " problems

  J W Stuart: http://www.pagestart.com

• Problem with Windows 7 Service Pack 1: the update process crashes during every start/restart

  Hello.

  I downloaded the SP1 for Windows 7 from Microsoft Download Center (I had the Ultimate 64-bit edition initially installed on my computer). I ran the installer and went through the process of updating until the first reboot. Since that time, my system is unbootable not. Windows 7 starts to run and then the SP1 update process runs and applies the changes to the registry and system files. After awhile, the update process freezes and I have to turn off the computer with the power switch. This is repeated again and again each time you start. He stops to date when he reached update number 117880 of 334835 or 334835 117930 (but not always these specific), and he is trying to change some registry entries apparently: 'operation 334835 (\Reg...) 117880 update application', this is what is shown on the screen below the still glowing Windows logo.

  In addition the secure boot mode, startup mode safe with networking, security console startup mode, last known good configuration options do not work. They all start to load but crash after a while (as if the same SP1 update process has been run in silent mode).

  I don't want to reinstall Windows 7 from zero and all the applications that have been installed. The ERD that I generated after my initial installation can not solve the problem, nor the Windows 7 can install DVD. It doesn't let me do an upgrade from the original DVD since it has not be started from the hard drive and then launched from within Windows 7.

  I looked in several discussions of the forum and found that my NTFS partition is marked 'active' as it should.

  I plugged my HARD drive on another computer and have access to its content.

  So is it possible to stop this automatic process and be able to start (in the original state of Windows 7)? At least to re - install Windows 7 via the DVD upgrade mode and then installing SP1 on a little further.

  Perheaps the log files from the SP1 update process could be useful, but I don't know where they are on the HARD drive.

  Thanks for your help.

  Yo_54.

  So is it possible to stop this automatic process and be able to start [...]?

  Hello.

  My startup problem is resolved. Now I can start Windows 7 and use my system again.

  I used the dism.exe tool back updates on hold through a wire found in the TechNet Forums: "C000009A update operation 334565 (\Registry\...) 119595 application error". loading SP1"(see link below).

  I launched WinRE with my Windows 7 installation DVD, selected my C: partition where Windows 7 has been installed, click on the button 'Next', refused to the proposed repair phase, and then chose the prompt for commands and typed:

  DISM.exe / Image: c: \ / Cleanup-Image /RevertPendingActions

  It took less than 15 minutes for the tool to the end I restarted my computer and waited a few operations update, then Windows restarted and more, and finally I was on my homescreen. After my connection, a dialog box been told that SP1 was installed (the winver.exe command showed that SP1 installed too).

  I think that now that I have completely will be re - install Windows 7 in upgrade mode, recheck all the pre-requisites for SP1, uninstall all language but English modules, uninstalling my anti-virus and anti-spyware programs disconnect you from the Internet and run the standalone SP1 install package. I'm going to see if the problem is persistent and keep you posted.

  But first I'll make an image of my C: drive system and store it somewhere safe!

  I found the solution through this thread in the TechNet Forums:

  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/cad66cc7-9912-4cbe-898F-ad8ff9344308

  Best regards.

  Yo_54 (Johann).

• reason for my windows 7 OS crashed & had to be re-installed seven times in nine months with the losse of precious files is the same reason that microsoft has been duffed the international space station?

  am I right to assume that the same reason, my windows 7 OS crashed & had to be re-installed seven times in nine months with the losse of precious files is the same reason that microsoft has been duffed the international space station?

  Hello

  If I understand correctly you install os 7 times, still problem happens, its just a bad sector in plateau, well shot cause want to check your hard drive a d, you need to change your hard drive to solve this problem, if it is in warranty log a ticket