Windows 2000 on a Qosmio G10

Similar Questions

• No big screen in Windows Media Center on Qosmio G10-133?

  Hello
  I just set up my Qosmio G10-133 to watch the TV via a set-top box Freeveiw. However in Windows Media Center, I can't see it on the big screen. If I veiw the same programe in the Toshiba drive I can veiw on the big screen OK.
  Any help with this would be much appreciated.
  Thanks in advance.

  Hello
  Can you please check in the BIOS settings if there is option called display stretching or something like that?

• Qosmio G10: windows from the CD recovery

  If I restore my Windows from a CD that was given with my Qosmio G10, I lose all my files?

  Hello

  Yes, you will lose all your files. If you perform a new installation, please use the expert mode and you'll be able to create two partitions. On the first, you need to install OS and the second that allows you to save all your data.

• Qosmio G10-100 - need sound driver for Windows 7

  Please please please can someone help I have spend hours and hours installation charges unlike drivers and none work. I even tried to install DriveRobot and who installed a 97 RealTec but does not work.

  I need a driver for Windows 7 sounds for a G10 100, I'm sure that there is someone out there who has the same problems. Please note that when I go to the audio device it appears and no audio drivers not installed even though I have install Realtex ones.

  I'm sure that the generation of the sound card in the lappy is a SoundMax

  Live in hope

  Greg

  Hello

  You should check for drivers

  For European models

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  For Canadians or something like this:

  http://www.CSD.Toshiba.com/

  For the Australian and New Zealand:

  http://www.Toshiba.com.au/

• Qosmio G10 - no sound on DVD playback

  I have a Qosmio G10 - 106 I just got working again - had to replace the hard drives. I have loaded Windows 7 top and almost everything works up to a point, but gradually working through each of the questions.
  I can't find the original restore disks.

  The problem I have with sound - there is no sound during playback of dvd, although it works very well on Web pages, IE YouTube and is also on audio CD.

  Any suggestions please?

  Hi Debsta_1!

  What software you use to watch DVDs?
  In my opinion, this has something to do with the software you use, because you wrote that the sound works on pages web e. g.

  I always use VLC media player to watch movies on my computer. It s compatible with most audio and video files and this tool is a freeware. I like it a lot because it of too small and never had a problem with it.
  Check this box!

• Qosmio G10-137: blue screen after re-install using Recovery CD

  Hi all

  just got my qosmio G10-137 earlier this week after being under repair since the beginning of the month of January! Guys made the repair found no better then install the Dutch version of the operating system. I don't like this, then I took out my recovery CD and began the recovery. Everything works fine and I am asked to remove the media and reboot my PC.

  This beautiful laptop to start early and... Blue screen of death. Restarts, wonder how to restart... count up to normal reboot... BSOD... restarts, wonder how... I choose "Safe Mode"... BSOD... I choose the mode safe mode with prompt... the system.ini file is missing!

  It seems that the recovery CD is bogus.

  If someone has encountered this? Does anyone have any resolution?

  Kind regards
  Wim

  Post edited by: wvl

  Hello

  It s very strange because the recovery CD was tested and install several times. It should work without any problems.
  I put t know where you come from, but the service partner should install the Windows operating system in the same language. In this case, if you bought the device in Dutch the recovery CD and the OS are in the Dutch language.
  Please note that you must use the same recovery CD that came with the device. Another recovery CD will not work.
  What you can do is to test the unit with an original CD of Microsoft Windows. It would be very interesting to know if the blue screen appears with the original Windows.

• Qosmio G10-100 - failed afer replacement with larger HARD drive HARD drive

  Following a failure in a Qosmio G10-100 HARD drive, I replaced the HD 80 GB IDE current with a 160 GB IDE drive. After execution of the recovery of the DVD, new HARD drive has been formatted and installed the software (later proved by removing the drive and treat as an exterrnal disk on another PC).

  However, on booting, the machine has recognized that it was another hard drive and it wouldn't let me go beyond the screen that offers alternatives (Safe Mode, etc.), nor what would allow me access.

  Counsel gratefully received

  > After running the recovery DVD, new HARD drive has been formatted and installed the software (later proved by removing the drive and treat as an exterrnal disk on another PC).

  Sorry mate but I put t understand what you did exactly
  You have installed the Windows operating system on the new HARD drive by using the recovery disk. Right?
  Well, the recovery procedure has completed correctly? The operating system has been successfully installed?

  Did repeat the installation of the OS?
  If this is not the case, repeat!

• Qosmio G10 does not work - some graphic problems

  Hello
  I have a Qosmio G10 a few years back, within the first year of its use the graphics seemed to go crazy after using it for games.
  Since then, I've left the but recently I dug to see if I can get it fixed it as my partner needs.

  1. whenever I start it I have a white screen with sound (I can get the screen each time by pressing F5 (current view).
  2. I tried the system restore cd, but when it finishes I wake a fragmented Windows screen with the beginning bar all over the place, and then it just freezes
  3. However, when I try a professional XP operating system to recover (I found somewhere), it starts up no probs apart from a few blue vertical lines on the screen, starting when I get on the desktop there is no probs although res is set to low and used to move (no graphics driver). Then I tried to load the Qosmio tools & utilities and can support all but the Chipset (that quite fragmented and I have to restart the whole process) and driver nvidia Gforce graphics that I assume will not charge because the chipset?

  I thought it might be a cd of defective recovery but when I changed during a hard drive of new fresh on the wrapper started everthing briefly as it should do this before, he crashed any temptation of power again.

  Pulling my hair out please help!

  Hello

  > 1. Every time I start it I have a white screen with sound (I can get the screen each time by pressing F5 (current view).
  Looks like the screen is positioned on the external monitor and so nothing does not appear on the internal screen laptops. Perhaps this happens because of the changed settings in the properties of the graphics card.

  > 2. I tried the system restore cd, but when it finishes I wake a fragmented Windows start with the bar start screen all over the place, and then it just freezes
  Usually the laptop should start correctly after the installation of the recovery CD. If the laptop freezes then a hardware problem is possible.

  > 3. However when I try an operating system XP Professional to recover (I found somewhere), it starts up no probs apart from a few blue vertical lines on the screen, starting when I get on the desktop there is no probs although res is set to low and used to move (no graphics driver). Then I tried to load the Qosmio tools & utilities and can support all but the Chipset (that quite fragmented and I have to restart the whole process) and driver nvidia Gforce graphics that I assume will not charge because the chipset?

  In my view, your graphics card could malfunction. I come to the conclusion because the laptop works ok until the graphics driver will be installed. Without graphic driver installed the laptop seems to run I think GPU dysfunction could also be the reason why the laptop does not start correctly after the installation of the recovery CD. The restore CD already contains the graphics driver that controls the graphics card chip

  So in my opinion, you should contact the ASP in your country for a control of the laptop.
  Maybe the technicians could find the fault.

  Good luck

• Purple stripes on screen Qosmio G10 106

  Hello
  All of a sudden my Qosmio G10 - 106 has started to show me purple stripes when I turn it on, it me does not start then I reinstalled Windows on the 2nd partition. This allowed me to start then, but the lines persist. Anyone had same problem and if so, please advise me a solution that I am not covered by the guarantee as it exprired last October.
  See you soon

  Hello

  I recommend you test with the external monitor. If the external monitor doesn't show the same there is a problem with the display and you must contact the partner of service authorized in your country.

• What is this update? (Qosmio G10)

  I received the email below from Toshiba. I hate the fact that they - in most cases - do not explain what is an update about and I also hate to install something I have no idea what it is.

  All done and can tell what it is? Is this somehow, or simply an extra utility. My WIFI works properly, so I did not any question about that.

  Thank you.

  PC: Qosmio G10
  Type: Wireless Lan Client Manager
  Taal: universal
  Besturingssyteem: Windows XP MCE

  A link of Klik om het hele artikel op you read more
  http://nl.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?id=35667&OSID=23&drive rLanguage = 42 & selectedLanguage = 12 & driverCountry = 41 & selectedCountry = 24

  Hello

  In my opinion that you need not explanation because the update type is clearly indicated. It's just Wireless Lan Client Manager and if you know what that means avoid any problem.

  Good bye

• Qosmio G10: Monitor completely blackened

  Hello!

  I have a problem with my Qosmio G10, I turn on the laptop, the fan made a noise, and finally he logs in Windows. Meanwhile, I can't see what is happening, because the screen is blacked out. I hear just to log on Windows.

  I tried to connect a normal PC monitor, in addition to press Fn + F5, which is the shortcut key for b/w display switch types.

  If anyone has or has had the same problem and could help me, I would be more than grateful, as long as this problem is happening for weeks.

  Hello

  Have you tried to boot in safe mode?
  Please check if this is possible and if it will not solve the problem of the display.

  But if the note, then I suggest that there is something wrong with the display or a part of the screen for example: FL inverter.
  In this case the best way is to contact Toshiba service partner because he could do a diagnostic test and it can get a good answer what part is default.

  Good bye

• Failure to display on Qosmio G10

  Hello

  I use a Qosmio G10 for 4 years now. I just got a new motherboard installed 2 months. This morning the display begins to act weird.
  When starting the laptop, windows, start symbol appears almost normal colors, but when the windows desktop is running for 2-3 seconds, the picture becomes bright. The text of the desktop icons is not sharp, and half lower of the screen there is a fine glitter mesh. Although the colors are abnormal on the entire screen: (to be determined with paint)
  -Black is black and white is always white
  -light gray (hue 120, saturation 0, RGB brightness each 192 181) seems normal but dark gray (hue 120, saturation 0, 120, RGB brightness every 128) is represented white.
  -brown (0, 240, 60 128 red brightness saturation hue) and the red light (0, 240, 120 red 255 brightness saturation hue) are represented as the same light red.
  -too dark and clear (yellow, green, turquoise, blue and magenta) are represented as the same color on the screen.
  I look at the picture you see immediately that the colors are not properly represented.
  When the screen is off, and then it shows colors initially normal, but then (after 2-3 seconds) everything becomes brighter and the colors become indistinguishable as described.

  If a 2nd screen is used each colors appear normal.
  I tried the new display driver: no improvement.

  Please give me a diagnosis which component is defect. Do I need a new display or is the new mainbord fault (guarantee).

  > If a 2nd screen is used each colors appear normal.
  According to your description it takes the laptop display problem.
  On the internet you can find many free tools for the control of the display. Try to test with these tools.

• Video error on Qosmio G10 since the new software

  Hello world

  I have a problem with my MCE LiveTV. When I want to watch live TV, then always comes this error:

  "Error video - files neede to display video are not installed or not working not properly." Please restart Media Center or restart the computer.
  When I follow this order, nothing changes.

  I have this problem since I installed new software on my Qosmio G10 yesterday. It's called Magix Video deLuxe 2005/2006. When I uninstalled the new software, Live TV still does not work.
  It only works when I have sett my computer back to the time where I have not yet installed Magix Video deLuxe. But then I can't use the new software.
  I also tried to reinstalled the video driver and the TV Tuner, but the error is still there.

  What can I do now? Please help me

  I would say that the software that you install is not compatible with Windows MCE. It is possible and the cause likley. If you have all updates for windows and Magix Video and it still does not work then the problem is with the software application and the no compatibility. The fact that it works before and after roll you back OS proves it.

  What are you actually trying to do with the Magix software that Windows can't do?

• Qosmio G10: How to get Toshiba virtual sound in the taskbar

  System: Qosmio G10 running Windows XP.

  When I bought the system, it came loaded with application of 'Virtual Sound' of Toshiba, which has replaced the standard Microsoft Volume control app in the XP taskbar (bottom right of the screen). Now, the 'Volume Control' standard app appears in the taskbar.

  How to bring back the "Virtual Sound" app? It allows me to switch easily between defining the sound of the internal speakers of the laptop and using bigger speakers.

  Thank you!

  Ben.

  PS. love Qosmio!

  When you start the virtual sound application icon should appear in the taskbar.
  Try right-clicking on the application. Maybe you'll get an option to place in the taskbar

• Qosmio G10 with the new graphics card and pcb - CD update tools do not work

  Hello world

  I hope you can help me. Before a few weeks, I received my Toshiba Qosmio G10 return of aid, because the laptop no longer works. So I get it back with a new graphics card and a new PCB. With my laptop I have a CD called the update tool CD and a sheet of instructions, where it says to start with this tool CD-Rom update after you have installed the Windows with the reovery CD.

  So I did, but when I know the update tool CD to put in and I start with it, the computer installs something, but after a short then it is a message that it is a different model and that I have to put a button to close Notepad. So I did it, but Windows does not start.

  Why is it so? I had done everything that has been said on the instruction sheet.

  Please help me

  Hello

  It will be interesting to find more information on this CD-Rom tool update. Are there tags Toshiba? Can you please write what is described here?