Windows 7 64 bit using 3 GB of 8 GB RAM when idle.

Similar Questions

• Why windows xp 32-bit supports only 3.25 GB of ram?

  Why windows xp 32-bit supports only 3.25 GB of ram?

  Tehre is no solution for this problem, and I don't want to install xp 64-bit,

  coz its not user frndly, thank you

  My apologies, I must have misread the topics when I did my first answer. For some reason, I got it in my head, whether you use Windows 7 32 bit.

  I stand by my original comments well that although I appreciated now that you are referring to Windows XP.

  If you want to go to 64-bit Windows XP I'm not sure if this is even possible now. Unless you buy a commercial version second hand. If you can, make sure that it comes with an installation CD.

  To check the compatibility 64 bit XP the following may be useful...

  http://support.Microsoft.com/kb/896456

  http://support.Microsoft.com/ph/8599

  It will be even more important to check the hardware/software compatibility via the websites of the manufacturers.

  Tricky

• OfficeJet 4630: anyone can print reliaby with Officejet 4630 under Windows 10 (64-bit) using wireless?

  I have a couple of PCs.

  Both run Windows 10 (64-bit).

  An upgrade from 8.1 64-bit. The other is Windows 7 ultimate (64 bit).

  I bought Officejet 4630 at the end of September.

  So far I have not been able to print from a reliable PC at all.

  Sometimes maybe a page can be printed, but if I try the next page. The print queue seems to get hung.

  Worse, on a PC (Win7 64-bit upgrade), I can not connect with USB at all.

  Immediately after installing the driver, it fails to "print test page"? What gives?

  (I have not tried the USB connection with other PCs through the situation. He's far away and so connected via radio.)

  Strangely enough, it's the HP printing diagnostic seems to work perfectly. It prints the test page.

  But, after a week of Calvary and see how works the test via the web interface, I now have the feeling that

  HP diagnostics program simply sends a command that causes the printer to print a test page to itself, and not

  through the path of ordinary driver through what print ordinary application data. It can be found.

  Due to the failure of printing with a USB connection, I asked local HP support for replacement t

  hinking that unit was bad.

  However, the replacement arrived today, but the same symptom!

  Agah.

  I'm afraid that HP screwed royally here, but worse yet, it doesn't seem to be aware of the problem in the light of some

  Reviews of so-called unconscious support people!

  If someone has this printer works reliably on windows 10 64 - bit

  Please let us know what you were doing. (although the chance that someone with perfect condition watch Forum HP may be low. You are posting and I read this forum because of problems...)

  -How you installed the driver (from which source)

  -which tweaks you did.

  I tried to install the OJ4630_198 and the driver is updated to Windows.

  Windows Update seems to be a little better, but still stuck print jobs are seen after a few

  tests and unnecessary. (Initially because of this apparent initial success, I thought that the problem was limited

  so a PC, but now I think that both PC evenly suffer failure).

  So far, I tried to change the PORT to a fixed TCP/IP address port (which sometimes seems to be feasible: sometimes not.) I was not able to understand why. Maybe the difference between HP driver or Windows update)

  Sometimes after the Ministry of port, the first printing time works, but the

  next print does not work.  It remains in the queue.

  This has been driving me crazy...

  If person not steps forward with the installation of reliable work (10, 64-bit windows), I think I'm going for it back to HP, although the initial cooling period has expired from a legal point of view, I'll see if I can convince the support contact.

  I bought HP printers only over the years. They lasted well and worked like a charm, and the black ink was really nice.

  After that, I can't printers recomment the HP to my friends more.

  TIA

  [Driver in Deskjet 6980 works for printing with capricious 4630]

  Under improved Windows 10, too!

  I checked it after upgrading my PC under Windows 7 64-bit of Windows 10.

  After a few false starts, however, some programs are missing 'Dropbox' "Norton Internet Security" (?)

  sort: I downloaded the binary Moose and once I let the Installer run again, they picked up the proper

  configuration of the previous installation and started running.

  I needed to tweak 'Register windows' but when I tried to run 'regedit' something 'Extended attributes are '.

  inconsistent"and any program that requires administrative privilege would begin: maybe Dropbox and Norton Internet

  Security has failed because of this issue. Surprisingly, I could fix this by restoring the default Windows theme.

  (In my previous attempt to update, I put it to something Bing, a jazzy theme on the Japanese season, or something.

  Affected and surprising finished showing 'Extended attributes are incompatible' (or you may need to

  reset the sound theme as well. YMMV.) I raised this strange questions after the upgrade just in case

  These problems are related to the Deskjet 6980 under Windows 7 64-bit driver installation before upgrading to Windows 10.

  Somehow, however, the previous installation of the driver instance 4630 seems to have disappeared (maybe I deleted it before

  the upgrade, I don't know.) So I install driver 4630 for * SCANNING * purposes only.

  FAX can wait a while.

  Finally, some working environment for Officejet 4630 with using the Deskjet 6980 driver for printing

  is being created.

  TIA

• OJ4580 install on Windows 7 64-bit using OJJ4500_full_13.exe fails, 'No driver found'

  Install an OJ4580 on Windows 7 64 bit home edition premium installs all the junk, Center solution, the Manager of documents etc., and then told me there is no driver for the printer in the program that I just downloaded on the website of HP.  Very funny HP, now where the real install program?

  Hello

  It seems more likely that spawn something wrong with installation.

  We will try these steps and let me know if that can help you:

  1. Make sure the printer is powered on and connected to your PC.
  2. Click on the start menu and type %temp%.
  3. Open the Temp folder in the search results.
     
  4. Click CTRL + A to select all files and delete them, no need to worry about delete files as all the content of this file is temporary.
  5. Launch the installation files once more and allow the extraction complete.
  6. You will find a new folder in the temp folder, starting with 7Z.
  7. Open the folder, and then open the subfolder named as the model of the printer until you see the content of the whole installation.
  8. Right-click the address bar and select copy the address.
  9. Go to control panel > devices and printers.
  10. Right-click in the background area, and then click Device Manager.
  11. You will find the printer listed under peripheral Bus USB or other section controllers.
  12. Make a right-click on the name of the printer and select Update driver software.
  13. Select Browse my computer for driver software.
  14. Paste the file copied into the box and click Next.
  15. Follow the instructions on the screen, which should point the operating system to use the correct browser and the installation should appear and complete.

  Please let me know if that can help solve the problem,

  Shlomi

• Window 7 64 bit using 13.4 GB of Winsxs even after speaker

  I use Windows 7 64 bit and am exhausted over the disk space and find the Windows folder > Winsxs is having more than 17,000 files / subfolders from 2009 and using 13.4 GB of space.

  I have the speaker and also track dism.exe. Prior to that, I made sure that installed this update fix 2852386 (again, I downloaded and tried to install it, the message appeared that it is already installed).

  In utility speaker, I cannot find the files 'Window cleaning was updated', but it shows "backup files from the service pack" with O byte.

  Please help me if there is something possible to do to get rid of old files that is located in the folder since July 14, 2009.

  Vimal Goyal

  Hello

  There are not many things that you can do with the WinSxS folder, and that the size is not uncommon.

  If you make a mistake in it, you can make your operating system unusable.

  "How to approach the problems of disk space that are caused by a large directory of store (WinSxS) Windows component"

  https://support.Microsoft.com/en-us/KB/2795190/

  The store (C:\Windows\winsxs) Directory Windows component is used during maintenance operations in the installations of Windows. Maintenance operations include, but are not limited to, Windows Update, service packs and patches installations.

  The component store contains all the files that are required for a Windows installation. And, updates to these files are also held in the component store as the updates are installed. This causes the component store to grow over time as more updates, features, or roles are added to the installation. The component store uses hard links NTFS between itself and other directories of Windows to increase the robustness of the Windows platform.

  The component store will show a size large directory because of the way the Windows Explorer shell holds into account hard links. The Windows shell is taken into account each reference to a hard link as a single instance of the file for each directory in which the file is located. For example, if a file named advapi32.dll is 700ko and figure in the component store and in the \Windows\system32 directory, Windows Explorer incorrectly reports that the file consumes 1 400 KB of hard disk space

  The component store cannot reside on one volume other than the system because NTFS hard links volume. If you try to move the component store, this will result in the inability to correctly install Windows updates, service packs, roles or functions. In addition, we do not recommend that you manually remove or delete files from the component store.

  To reduce the size of the store directory of component on a Windows installation, you can choose to make the installation of the service pack permanent and recover space used of the service pack files. However, if you do the permanent installation of the service pack, the service pack is not removable.

  To delete the files from the service pack to a Windows installation, use the following utilities of the box:

  • Windows Vista Service Pack 1 installed: VSP1CLN. EXE
  • Windows Vista Service Pack 2 or Windows Server 2008 Service Pack 2 installed: Compcln.exe
  • Windows 7 Service Pack 1 or Windows Server 2008 R2 Service Pack 1 installed: DISM / online /Cleanup - Image /SpSuperseded or the wizard disk cleanup (cleanmgr.exe)

  And this can help you too:

  http://www.howtogeek.com/174705/how-to-reduce-the-size-of-your-WinSxS-folder-on-Windows-7-or-8/

  Why the WinSXS folder becomes too big

  The WinSXS folder contains all of the components of Windows System. In fact, the component elsewhere in Windows files are links to files in the WinSXS folder. The WinSXS folder contains all the operating system files.

  See you soon.

• Installign 7 64-bit windows Vista 32-bit using the upgrade disc

  I have a toshiba satellite running a 32-bit vista. I got the upgrade windows 7 toshiba drive which contained both 32 and 64-bit. When I did a clean install of windows 7 it installed 32-bit. It gives me an option to install the 64-bit. Is it possible to install windows 7 64 bit?

  Windows 7 32-bit and 64-bit are on a separate disk, they are not both on a single disc.

  Questions about installing Windows 7? Read this:
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• y at - it a fix for Flash Player installer does not not on windows 7, 64-bit, using firefox?

  I hit the download link, permission from windows, and the Flash Player installer window comes up, but does nothing. I left every day when I went to work, come home 12 hours later and it was still just sitting there not to install it. Is there any solution for this? I looked everywhere and nothing of what I found worked. even suggestions on the adobe support page does not work...

  And you used on the link offline installers that Andy post:

  • Flash Player for Internet Exporer - ActiveX
  • Flash Player for Firefox - NPAPI

  If so, please send the contents of the FlashInstall.log file in C:\Windows\system32\Macromed\Flash

• Should I install windows 7 64 bit on Ideapad Z460 with 2 GB ram?

  Hello world!

  I use Ideapad Z460. Chipset: Core i3 M380, 2 gig of ram. I use windows 7 x 86 (32 bit). Should I upgrade to the 64 bit version of windows 7? And my computer runs faster after the upgrade?

  Thanks in advance!

  Thanks for your comment!

  Already, I have installed windows 7 64-bit. It works very well. Specifically, I think it's really faster when I install applications. I use as a 4 GB USB DRIVE for readyboost.

• Windows 7 32 bit does not recognize 4 GB of RAM

  I just bought a new w500 with windows 7 32-bit and 4 GB of RAM, I know that windows 7 32 bit must be able to work with 4 GB of RAM, but when I check the Windows System Control Panel 7, he said: installed memory 4 GB, usable memory 2.46).

  When I check my setting of the video adapter it says 512 MB dedicated memory and 1024 MB shared memory.

  I don't really know what to do, I don't know I used the 4 GB ram with windows Vista Ultimate before and it was OK.

  He was everything to solve this problem? Do I have to install a 64-bit version of my windows 7 pro?

  If I is there a way I can install it with the serial number supplied with my laptop, so I don't have to buy a new version of windows, I've just will download and install a 64-bit version of windows 7.

  -Besides, I'm not 100% sure, but when I got the laptop, on the Panel of the system, he showed that he uses all the 4 GB of ram, after 1 day of use and when all Thinkpad and microsoft drivers updates have been installed, what happened.

  now, just please help me and tell me what I need to do?

  You probably need to transfer activation with something like ABR unless the key works for both versions now. Retail Vista keys worked for 32 and 64 bit version but haven't Lenovos OEM key.

  Regarding your 2.46 GB of ram - I the only thing that indicate is that Windows is telling you the truth its time. There is no way any 32-bit system can use full 4 GB. Information system in Vista have generally shown only to installed RAM without showing the usable memory. They fixed in Windows 7, and now, he can tell you the exact amount can be used. But that doesn't change anything but your taking of consciousness of the fact.

  Oh and when I was using Vista 32 it showed the / 3 gb in a first time and then went down to 2.46 I was installing graphic drivers. Switchable graphics driver supposedly did this and some users have reported that uninstalling / installing different drivers, but I prefer to install windows 64-bit for peace of mind.

• After Effects uses a lot of memory (live RAM) when you perform simple work

  Hello

  When I open AE, make a new project, import a simple 20 MB mp4 file itself and start playback of the clip (RAM Preview), consumption of RAM of After Effects gets up to 5 GB, and the CPU usage gets up to 50%!

  This is a really simple job, and I don't know why it takes so many resources, it wasn't happening to me before.

  I'm on Windows 8.1, I use After Effects 13.2.0.49 (2014.2) and I have 8 GB of RAM.

  Why is this happening?

  Thanks in advance.

  Post edited by: Bogdan Mitrovic

  MP4 are notoriously calculation-heavy because they are so heavily compressed.  What explains the treatment part.

  RAM previews allow AE to use so much memory that it has to play in real time.  What explains the part of the memory.

• The upgrade from 2 XP Machines to Windows 8 32-bit using CD 1.

  I am planning to purchase and install 8 32-bit Windows and then switch to 8.1 by the store.

  I have the new Mobo and parts to come for my laptop and have already spent $300,00 +/-to prepare the desktop computer.

  My office has full-file XP SP3 with a genuine Windows key.

  I also have a laptop that died so hard that I have to do a Complete install with a new key.

  I understand the new key, but;

  Can I use the same installation CD and use the Office XP key that I have to upgrade, without buying another key?

  Both computers are guaranteed officially custom and past.

  Hi Robert,.

  Thanks for posting the request in Microsoft Community Forums.

  You can install Windows XP by using the CD, however it is not possible to use the same product key to activate that has already been used on the desktop. I suggest you perform a new installation of Windows 8 on laptop with the new retail product key. Therefore, you may need to purchase 2 product key of Windows 8 to activate both computers.

  How to perform a new installation of Windows

  http://Windows.Microsoft.com/en-us/Windows-8/clean-install

  Hope this information helps. Response with status so that we can help you.

• Update for Windows 7 64-bit using the 01/05/11

  Hello peeps

  New to Windows 7, as most of us la!

  But after the critical update on 01/05/11 my mouse starts to spin and the and after about 5 minutes truns just make me unplug and insert it again operate

  tried a system restore to that date and a scan to see what that the affected update and the mouse is on the list. but he will restore at this point and it's the only one!

  The mouse is a microsoft USB optical intelliemouse.

  I have also deleted the drivers and restart still same prob

  Help

  Hi Ross1971,

  1. what happened when you try to perform the system restore?

  Method 1

  See the Microsoft article and try the steps mentioned below

  Troubleshoot a wireless mouse that does not correctly

  http://support.Microsoft.com/kb/321122

  Method 2

  If the previous step fails, see if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Also check the update is causing the problem with the mouse.

   

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows7/see-which-Windows-updates-are-installed

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• matrix printer does not work with windows 7 64 bit, using usb adaptor.can I install a PCI to printer so it works?

  Okidata ml 184turbo 9 in printer by points, man. pilot States included with the windows software Web site 7.  The computer does not have a lpt card installed or a serial port. The printer will be seen with this card, if I can find a lpt PCI?

  Okidata ml 184turbo 9 in printer by points, man. pilot States included with the windows software Web site 7.  The computer does not have a lpt card installed or a serial port. The printer will be seen with this card, if I can find a lpt PCI?

  According to Okidata it should do, but you also tried the procedure described here Manual printer driver installation?  http://my.okidata.com/pp-ML184Turbo.nsf?OpenDatabase

  

  Also check that your USB adapter is installed (Device Manager) and the computer can set the optimal settings for the port LPT adapter (properties).

• Windows 7 64 bit does not recognize 4 GB of RAM

  I installed 4 Gig, acknowledges that 3.  The processor is Intel Core 2 L7400.

  the X 60 that Tablet is based on the 945GM chipset.   This chipset supports a maximum of 3 GB of memory addressable.   You can install 4 GB physically, but the system only deals with 3 GB maximum (even with a 64-bit OS).

• My ram is 4GB (3.8 GB), why windows 7 ultimate 64-bit use 3.8 GB to 4 GB of ram?

  My ram is 4GB (3.8 GB), why windows 7 ultimate 64-bit use 3.8 GB to 4 GB of ram?

  I want a solution for this problem.

  The system still requires little RAM or not 64-bit.

  If your computer has more than 4 GB of RAM installed, Windows 7 64-bit using 4 GB and more which is what it is supposed to do...

  You do not have a problem...