Windows 7 64 Ent, printer problems

Similar Questions

• WINDOWS VISTA BUSINESS AND PRINTING PROBLEMS WITH MY HP 840C DESKJET PRINTER.

  RECENT APPEARANCE, PRINTER GOES THROUGH ALL THE MOTIONS TO PRINT, BUT A CLEAR SHEET COMES THROUGH.  I HVE CHECKED CONECTIONS HARDWARE, OK; CHEC'D SOFTWARE COMPATIBILITY, OK; SMC WOULD HAVE WINDOWS VISTA ONLINE HELP SITES AND SUGGESTED AUDIT SOFTWARE IS USED.  LAURYS ALL OK.  THE MAJOR PRINTING PROBLEM IS WITH MY ONLINE BANKING WHEN I TRY TO PRINT STATEMENTS ETC. ON THIS SITE.  I HAVE CHD'D WITH THE APPROPRIATE SITE TECH PEOPLE AND THAT THEY HAVE NOT HELPED, SAME PROBLEM,...  WOULD APPRECIATE ANY SUGGESTIONS OR HELP WITH SIMILAR PRINTING PROBLEMS!  e > j > t

  Display uppercase is considered shouting & your message is difficult to read and can be ignored by many.

  Say the HP support? Often with an HP printer, the solution the easiest is to unplug the printer, uninstall the HP printer via Add/Remove, runDisk cleaning software and restart. Then download/install latest drivers/software from HP and only connect the printer when the installation says.

  Of course its possible allways the printer failed.

• Samsung SCX-4300, Windows 7, 64-bit printer problems

  Our Samsung scx-4300 printer has stopped working. We have a desktop computer running windows 7, 64 bit.

  Have already repeatedly deleted the printer, installed the last pilot, did a restore of sys, switch, ports but nothing seems to solve the prob. Today in desperation I even bought a cable newprinter, but alas, same old prob.

  The mystery is this - the printer works fine when I connect it to our win - xp netbook.  Also, sometimes (on windows 7), it will print the first page then stop. Earlier than he usually just print the Greenlight on the printer flashes, but after 5 minutes the following is printed...

  INTERNAL ERROR - Incomplete Session by time out

  POSITION: 0XAA60 (43616)

  SYSTEM: H6FW/os_hook

  ONLINE: 1634

  VERSION: QPDL 1.40 11/14/2005

  I'm trying to print using PDF XChange Viewer and Word 2007. Once I sent the file to print, check the queue, it seems that 256 KB (for a file of 2 mg) was sent to the printer, but then he of the clogging. Very annoying. Wot2do?

  Hello

  Maybe this can help.

  http://www.Samsung.com/ph/consumer/monitor-peripherals-printer/printer-multifunction/Mono-multifunction/scx-4300/XSS/index.idx?PAGETYPE=prd_detail&tab=support

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Windows 95 version of Print Shop Deluxe is not compatible with Windows 7. If anyone can solve this?

  . Windows 7 64 bit printing problem

  I used the Windows 95 version of the Print Shop Deluxe on XP for years without problems, but now I just got a new laptop running Windows 7 (64 bit) and the CD will not download. Dialog box shows is not compatible. Anyone has any ideas, the update to download this CD please?

  Its unlikely that the PrintShop version designed for Windows 95 uses some 16-bit code that is not compatible with 64 bit versions of Windows 7.

  Most older programs don't work with Windows 7, in particular some programs for Windows XP, can you need to perhaps upgrade to Windows 7 Professional or ultimate edition if you run not an edition and download the Windows XP Mode free program which will allow you run old programs:

  Run in Windows XP Mode requires:
  (1) Windows 7 Professional, Ultimate or Enterprise (not supported in Home Premium).

  Windows XP Mode and Windows Virtual PC
  http://www.Microsoft.com/Windows/Virtual-PC/default.aspx

  Windows XP Mode now accessible to more than PC
  http://windowsteamblog.com/Windows/archive/b/Windows7/archive/2010/03/18/Windows-XP-mode-now-accessible-to-more-PCs.aspx

  Get started with Windows Virtual PC
  http://www.Microsoft.com/Windows/Virtual-PC/get-started.aspx

  http://www.notebooks.com/2009/11/23/using-Windows-Virtual-PC-with-Windows-XP-mode/

  Windows 7 - upgrade Express features:
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Anytime-Upgrade

• From updateing to 8.1 WIndows printer problems

  Until I updated to Windows 8.1 other months everything was going well on my new laptop, then I went to something of my HP Photosmart B109n scan and it did not work because the pilot was now missing and the application that replace the HP printer driver HP is useless.

  On the advice of the HP site, I tried to download the new driver, but it wouldn't go, he said I had to remove the exsisting installation but when I try it just reboots the computer, but is still there afterwards. It turns out the uninstall has disappeared from the current and installation does not appear in the installer I downloaded.

  As a last resort, I used the system restore but has not only the printer has not changed but now some pre-loaded apps will not work and ask to renew the license of developers.

  I'm a lost what to do next - please help!

  Your laptop is not known to me, but in the case of update 8.1 Win, you should check this update from Toshiba to win 8.1 page: http://www.toshiba.eu/innovation/gen...ws8_1-message/

  There you can check if the Win 8.1 is supported on your laptop and how to perform the Update step by step for Windows 8.1
  Some drivers must be uninstalled and updated after installation of update 8.1 to win!

  Regarding your printer problem:
  Each manufacturer of the printer contains own drivers for the Windows System.
  We don't know me if HP released Win 8.1 compatible drivers for the printer Photosmart B109n clean, but to be honest, this problem is not related to the Toshiba laptop. If you have problems using HP printer under 8.1 to win, you should visit the support page of the printer manufacturer for troubleshooting tips and workaround solutions.

• Printing problem on deskjet 4510 with windows 8.1

  I bought a new deskjet 4510 and have installed via usb on my desktop running windows 8.1. This isn't the impression through products of ms office word, excel etc. and either through wordpad. I can print Notepad files and pdf via adobe reader software.

  I tried HP print and scan doctor who did not find any problem with the printer and print a test page.

  I tried uninstalling and reinstalling, setting the printer wireless to the top but could not do print.

  I looked at the help on this forum and also tried selective installation, disabling all services except when starting microsoft services, but the problem remains.

  Help, please.

  Hey @rshri7869.

  Welcome to the Forums of HP Support!
  
  I understand that you meet your HP Deskjet printing problems in advantage 4510 series e-all-in-one printer to your computer Windows 8.1. You have included a large number of useful information in your post, so thank you. After reviewing the troubleshooting you have already finished, I came to the conclusion that what you feel is a conflict of driver on your computer Windows 8.1. To fix this please follow the steps below.

  How to add another driver:

  1. Open the Start screen (by selecting the windows start button in the lower left corner or by selecting the "Windows" button at the bottom left of your keyboard to the left of the 'Ctrl' key
  2. In the start screen, type "Devices and printers"
  3. If the option devices and printers automatically fills, click settings at the top right and then click on devices and printers.
  4. In the devices and printers folder right click on your series Deskjet 4510 and left click on printer properties
  5. Left click on the Advanced tab
  6. Left-click on new driver
  7. When the new window driver opens just hit 'next' until you see a list of manufacturers on the left and a list of printers on the right.
  8. Select HP as the manufacturer on the left
  9. DeskJet 9800 select the printer on the right. If Deskjet 9800 is only select "Windows Update" at the bottom left and once the update has been completed, you will be able to select Deskjet 9800.
  10. After selecting Deskjet 9800 hit next complete the new driver Wizard
  11. Under the printer properties window, select 'Apply' but do not hit OK
  12. Select the general tab
  13. Rename your printer in HP Deskjet 4510
  14. Click OK
  15. Finally, right-click on your Deskjet 4510 series once more and click on Printing Preferences
  16. Left click on the paper/quality tab
  17. Left click on the dropdown 'Normal' for the print quality down to the right and change its normal fast
  18. Press apply and OK
  19. Try to print!

  Please let me know if the steps I have provided to resolve your problem. Good luck!

• 10 Windows compatible printers: printer problems after the upgrade to Windows 10

  If you're wondering what HP printers are compatible with Windows 10, see this HP support doc: Windows 10 compatible printers.

  If you re having a problem with your HP printer after the upgrade of your Windows 10 PC, printer problems after upgrade to Windows 10 could solve your problem. He treats all kinds of questions such as:

  • Cannot print after upgrading
  • Cannot parse after upgrade
  • Printer software installation & screen opens instead of HP printer Assistant
  • "HP solutions Center can not run" or "Scan is busy or in use" error with a network connected printer
  • Multiple display of printer in the HP printer Assistant names
  • Can not scan or fax with HP Solution Center after that disabling HP programs to improve performance
  • "Access denied" error change HP Solution Center print settings
  • Cannot print with a pilot integrated Windows (Africa, Asia Pacific, Europe and Middle East only)
  • Fax device are not not in the devices and printers connected to a USB printer
  • HP Printer Wizard does not open with a USB connected printer
  • HP Smart printing does not open in Internet Explorer
  • "Error-2081883401' poster during the uninstall of the printer driver.

  In the compatibility Windows 10 doc, follow these steps to quickly locate your printer:

  Click and scroll down to the section for your printer, then hold down the CTRL and F keys. When appears in the search box, type the number of printer model to automatically find your printer. TIP: find the numberof the printer. For example, if you have a HP Officejet Pro 8600 Premium e-all-in-one printer, open the Officejet section and search for "8600" instead of "Officejet 8600.

• Printing problems after the installation of Windows Live Essentials update

  I am running Windows Vista 64 Home Premium version and had been successfully using an all-in-one HP PSC 2355 printer until yesterday, I installed Windows Live Essentials. Photos, in particular, never get to the file printing.  The TEst Page from Windows printer shows printer is installed correctly. Have tried to reset the printer (unplugging / plugging) without success. Have not found new drivers for the printer.  What should I check before I agree to replace the printer?

  Thanks for your suggestions.   I uninstalled WLE and my printing problems seem to be resolved.  Not really sure how useful WLE was and I received the long ok without it.

• Printer problems due to software on my windows vista desktop problems

  They told me that I have a software problem on my windows vista desktop, because - my printer print test page, but seems to have a communication problem with some of the jobs I want to print. I can't right click and print. Someone at - he heard of this problem and might be able to give me some advice?

  Hello

  1. What is the exact error message?

  2. What is the brand and model of the printer?

  3 have there been recent changes made on the computer before the show?

  Please follow the steps below and get back to us with the results.

  Method 1: Run the Microsoft fixit and check if it helps.

  Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/en-us

  Method 2: R the print service spooler and verify.

  You must be logged on as administrator to perform these steps.

  a. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.

  b. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. right-click on the print spooler service and then click Properties.

  d. on the general tab, next to startup type, make sure that automatic is selected.

  e. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  Method 3: Update the printer drivers and check.

  Find and install printer drivers in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  Update drivers: recommended links.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-drivers-recommended-links

  For more information, see the link:

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Let us know if it helps!

• 5535 envy all-in-one: HP Envy 5535 All In One - Windows 7 printing problem

  Hello

  I seem to have a printing problem. You don't know if it started after a rescent Windows 7 update or not.

  Funny, this is the printer will print the pages in the HP maintenance program but does print not anything using the software Windows, even the properties of the printer, print test page.

  Any help would be appreciated, thanks

  TomR

  OK, finally got this problem. Did a google search and finally found someone who has exactly the same problem.

  I had to disable all security software, and set the control to the lowest setting (off) UAC Windows user account. Then, uninstall and reinstall the HP software.

  Not sure why this started all of a sudden, only thing that's happened to rescently was multiple 14 or so Windows 7 updates on close April 14, 2015.

  Well well after 5 days that I fixed it myself, same technical 1 Microsoft Support level could not repair after a 1 hour on the phone and connect remotely.

  TomR

• Printing problems, when I go to search for a printer in windows, it says domain services active directory is not available

  My printer does not print. I rebooted the printer, but I still can't get it to work. When I go to search for a printer in windows, it tells the domain services active directory is not available.

  Hello

  1. is the computer connected to the domain?

  2 did you change on your computer?

  3. What is the brand and model of the printer number?

  4. is this a network or connected via USB printer

  Method 1:

  I suggest you follow the link and check.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  I also suggest you to follow the link and check.

  Solve printer problems

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-printer-problems

• I have windows vista and I'm trying to uninstall the hewett Packard software of the printer I bought a printer problem and it does not work because the HP keeps popping up

  Who can relate to Windows

  I bought a Hewett Packard printer and it did not work properly so I bact to the store and exchange it for a printer problem.

  but before he took back the HP printer I do not uninstall the HP with the HP CD software. After installing the software problem I now the HP conflicking with the software of brothers. then when I want to print something the printer HP appears. My question is I tried to uninstall the program from HP and it does not work. I call the Hewett Parkard Tech. and no help there either. So please give me a direction step by step on how to uninstall the software Hewett Parkrad.

  Leon

  See if it helps:

  Three ways to uninstall and reinstall the software of printer/Scanner Hewlett - Packard
  http://www.out-of-warranty.com/three-ways-to-uninstall-and-reinstall-HP/

• Printing problem on Windows 7 network.

  I just upgraded all my computers at home with Windows 7 Professional and just set up the network for shared printing.  On my main computer where the network is hosted (to connect to the printer, router, etc.), all the drivers installed and seems very good and computers on my network have all the necessary drivers installed. Currently, my HP laserjet 1020 printer is visible on all systems and print jobs are visible too even when I tried to print it, just document is located in the area waiting for the print window and do not print.  It is the only problem, when I tried printing over the network.

  I tried the printer troubleshooting tool, but it could not pick up any problem anyway.

  My two machines running windows 7 Professional 64-bit.

  Someone has an idea, what happens? I used to be able to print fine on the network when I was a nuer windows xp professional (32-bit)...

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• PRINTING PROBLEMS W/WINDOWS 8 ON 7515E PHOTOSMART HP ALL IN ONE PRINTER

  Since the installation of Windows 8, I got that printing problems. The good drivers have been installed on the site of HP.  It worked well at the start and all of a sudden, it doesn't. The print job is in the queue and when you look in the print dialog box, it says the printer is offline, but it shows that's it is connected to the internet and the static IP address keeps changing. The only solution is to completely uninstall the printer and reinstall it. Then it will work until the next time you have to print.

  What happens on both computers mobile home now with Windows 8.

  I can take the same document that would not print from these computers, it trouble-free printing from the computer that is running Windows XP.

  Tried the doctor to print HP (or whatever it's called) and it is nothelping to solve the problem.

  Help!

  This article should help with your error printer offline:
  http://support.HP.com/us-en/document/c02221706

  Give the steps described a try and tell us if it helps.

  Good luck!

• Printing problems Windows 7 XP mode

  I use Windows 7 Pro and having problems printing of programs in XP mode.  The printer works fine for any program used in Windows 7.

  the printer driver is installed in two modes.

  He worked on the problem.  Work that I had to click on USB in the top tool bar to connect the printer. Thanks anyway.