Windows 7 and the Satellite 2450-401 - SD card not working

Similar Questions

• My office and the (quick launch) taskbar shortcuts do not work.

  Here is my problem
   
  My office and the (quick launch) taskbar shortcuts do not work.
   
  the paths of the target go program, but when I click on them
  they jump to the top of the "open with" box, select the application to open the file with.
  I went into the actual program .exe files, and they work very well, also if I chose the file .exe 'open with '.
   
  I have two user accounts on the computer, and this problem only occurs on one of them.
   
   
  If I right click on the IE icon and click on 'Properties' (internet) are said (in this popup box)
   
  [X] Control Panel
  'c:/windows/system32/rundll32.exe '.
  Application not found
   
  I went in this folder and that the file is there.
   
  have ran McAfee, so, nothing found.
   
  That is what it is?
   
  Thank you
  Steve M.
   
  fast response helps to:
  E-mail address is removed from the privacy *.
   
  BTW, my PC is a Dell Optiplex GX260
  without other problems (I see)

  Looks like your Windows file associations have to dispose. This means that XP doesn't know what to do with files by looking at the file extension (.exe for executables)., .doc for MS documents, etc.

  If you don't have it you, something done for you - most likely malware.

  Go to this site WWW by Doug Knox:

  http://www.dougknox.com/

  On the left, click on the Win XP fixes, file Association fixed and read the instructions at the top of the page.

  Download the EXE File Association Fix on your desktop, unzip the file and apply it by following the instructions at the top of the page, then to restart and test.

  Run the following scans for malware, and then fix any problems:

  Download, install, update and do a full scan with these free malware detection programs:

  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  They can be uninstalled later if you wish.

• Dreamweaver CS6 how can I automatically indent the code? I've already put the presets and the codeview options, but it does not work.

  Dreamweaver CS6 how can I automatically indent the code? I've already put the presets and the codeview options, but it does not work. Thanks for advice

  Commands > apply Source format.

  I use it so often, I created a shortcut to it.

  Nancy O.

• IDE #1 error when changing from my dvd on the Satellite 2450-401

  Hello
  I just bought a Toshiba sd-r6472 dvd - rw to replace my old Teac on my Satellite 2450-401 dvd\cdrw. When I restart my computer, I get the error ide #1 and after loading the system (Windows and Linux) my new DVD - RW disc is not seen. I tried to install it under widows with the computer running is the same I don't see, but to the list I can open it (in there now). I updated my BIOS nothing. This DVD - RW works very well on a laptop of another producer. I tried to install another DVD - RW drive, it's the same thing. I have read a few forums and apparently the Toshibas have a few problems, readers are CSEL and put it into a slave (the player is all pine is plug and play) you must connect to pins or something like that. Can someone help me? It's stupid that a Toshiba drive does not work on a Toshiba laptop and works on another... If there is a simpler method to install it will help me much

  Hi Michael

  Before starting any discussion about your problem please use advanced search on this forum option and put the IDE #1 as search terms. You'll see on this forum, you will find a lot of similar topics. Check a little. You may find the answer. If this isn't the case, write again please.

  Good luck!

• Satellite A210: Synaptics TouchPad and the fn in Win 7 do not work

  I have a Toshiba Satellite A210 11 t (PSAEGE). Tired of Windows Vista, I changed to Windows 7.

  Everything works well except the Synaptics TouchPad and the key FN. Does anyone have ideas on this?

  Hello

  You must install the driver for the touchpad, VAP and Toshiba Flash Cards Support utility.
  I've got the A210, and I chose all the Windows 7 drivers released the Satellite L500 series.

  It worked correctly

• Windows 8 Upgrade, Toshiba Satellite C660 Matshita DVD does not work error code 19

  I just upgraded my Toshiba Satellite laptop to windows 8 and having a problem with my Matshita DVD-RAM UJ890AS. In Device Manager, I got the error "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19). Now, I tried to change the registry, but it shows no upper or lower to remove, I also uninstalled the driver and re-installed and I used the automated microsoft fix dvd all to nothing does not. Windows troubleshooting tool shows the problem but can not solve? Help me please!

  HEALED!

  
  
  All you have to do to avoid this error, code19 is to uninstall Toshiba Recovery Disk Creator and Toshiba Recovery Disk reminder. I thought that it had been uninstalled before that I've updated but I was wrong. I just uninstall both and hey presto it works :)

• Cannot connect the Satellite A660 to WLan - card not found Intel

  I unboxed it today and connected to my home wireless network. Everything was fine.
  I propose then my laptop in the living room where the router and the modem is, the connection dies less than a minute or two.
  Then he says that there are no networks in range at all, cannot detect everything.

  I troubleshoot it and the results are: he says: problem with the router / access point is fixed; and another notification that says a network cable is disconnected or may be broken. I have no cable so idk why he tries a wired connection. I reset my router and tried everything.

  I take her back to połączyćto left home in my room and it works fine, no drop outs.
  It's all new, satellite a66. I made sure that my data was on and the wifi is good.

  Another notification appears when I troubleshoot that says "My technology Intel wifi adapter not found" idk what it is all...

  Thank you.

  JD

  > Another notification appears when I troubleshoot that says "My technology Intel wifi adapter not found" idk what it is all...
  Because of this message, I would recommend checking the status of the WiFi (WLan card) adapter in Device Manager.
  You could uninstall the WLan driver in Device Manager.
  Then you need to download the latest driver from this page:
  http://APS2.toshiba-tro.de/WLAN/

  and should install the new drivers.
  Reconfigure the Wlan connection and test functionality.

  PS: Please make sure that the WiFi was enabled (FN + F8) before trying to set up the connection.

• Upgraded to Windows 7 and then downgraded back to Vista - ethernet not working, pilots it but says error Ethernet does not, code 10

  My computer is a Vista desktop Dell Vostra.  I've upgraded to Windows 7 and did not like (a lot of my programs wouldn't run well on it) so I tried to demote him back to Vista.  Now my ethernet does not work.  The drivers are there, but he says won't work, code 10.  How can I fix it?  I can't solve the problems on the computer, because I have no network.

  Hello

  go to dell and get the latest drivers for vista for your machine using one, you're on to get here

  Save the drivers for the flash player and then transfer them

  http://support.Dell.com/support/downloads/index.aspx?c=us&l=en&s=Gen

• Original image has disappeared I think off the hard drive and the BIOS password set up does not work?

  Someone please help me with this!

  I bought this laptop from a friend (have receipt) who sell it to me because the screen was cracked and spidered all out when you the activated. And everywhere he went to ask to get the screen fixed it is very expensive ($250 - $350) and he said that it would be just a newer laptop. So he sold me this which is a model Probook of HP4420s XT940UT #ABA. About a week after I bought this Probook friend who sold it to died me suddenly. It was sudden and terrible. Some time later, I had the time of the purchase of the LCD for this model, replace it myself (was very easy actually) and booted up the laptop with a new installation of Windows 7 Professional 64-bit Edition. After installing all my software and using the laptop for a while now, I wanted to get into the Bios that I've never done. So when I started the laptop, click ESC, then F10 to enter the BIOS, there were two places to enter a password is different then all Dell I've ever owned. One was mine I guees I put in place using HP protect tools and the other says BIOS/administrator. Well I can do most of the changes with the one I put in place with my password but my password does not work, nor can I get in some very significant changes that I wanted to do using Bios/administrator, as kindling the LoJack, namely the blocking of the hard drive etc. , turning on turbo boost, fan, etc. Well, since the person I bought is no longer with us, there is no one to turn to the answer to this question of administrator/BIOS password / problem.  I tried to take battery Rtype and restore that way, didn't work. Several times, I called HP and they sent me to a BIOS page to download the same BIOS, I have already, would not let me install it. When I bring up the command prompt and do not put anything in BiosConfigureUtility.exe happens, said just a wrong command. When I try to enter the BIOS through the C: file in the files of the SSM, I reach the BiosConfigUtility.exe file, click on it to open it and it just flashes a way small order page to fast to read what it says. I would like to have complete control over my laptop thinking I have a lot of time and money invested in it now. The problem would have something to do with installing the 64 bit version of Windows 7 instead of the 32 bits guess what it initially provided with?  Where can I find the UUID and what tech Department I would ask because if I have to call HP again and what other information should I have ready for them if you know? I have all the manuals and they say that this laptop is compatible with Windows 7 Ultimate 64 bit Pro is what I installed. I'm mixed responses from many different people on this and would like an answer from HP someone who has experience in dealing with the BIOS in the Probooks business models if possible please. I really like this Probook and have since become a big fan of most HP, Dell and Lenovo.  I intend to buy two probooks, one for my wife and one for my daughter because this one is like a MacBook, but better.  Thank you for reading this and I hope someone can help with more than one answer then GET AHOLD OF HP TECHNICAL TEAM. As I said, I did it.

  Model: HP Probook 4420 s

  Type: XT940UT #ABA

  Operating system: Windows 7 Ultimate

  BIOS version: 68AHHH Ver.F.20

  SM BIOS Version: 2.6

  Hardware Extraction layer: Version 6.1.7601.17514

  Jason,

  Sorry to hear about your friend and your problem.  The BIOS password cannot be reset without the help of HP.  They will need some information from your PC and increase your case.  I recommend you give them a call.

  -wes

• Power of the Satellite P100-240 unit does not work properly

  From time to time my power (PA2521E - 2AC3) unit starts beeping and stops the power get to the computer, forcing it to drain the battery.
  Summer happening for several weeks now and sometimes it stops itself, but other times I have to put my diet off for hours and keep checking to see if the beep stopped.
  It does not overheat as I only for about 30 minutes before it starts to beep.
  If I turn off feeding the continuous ringing for a few seconds before disappearing for good.

  What is - this and I should send it back?

  Hello

  I never heard that the AC adapter would do some sounds or would start beeping
  In my opinion it of not normal and the adapter must be verified.

  You should definitely contact the ASP (authorized service provider) in your country to control and perhaps this part needs to be replaced

  I think the warranty is valid at the moment and the replacement is done for free

  Good luck

• License with Windows 7 and the Satellite L875 - 11 M problem

  Hello

  I recently (about a month) sent my computer to TOSHIBA because of a hardware problem, so I think they changed the PCB from what I remember. My computer is a Satellite L875 - 11M and I am on Windows 7 Home Premium.

  Since yesterday, I lost my wallpaper on the desktop (do not know if it is normal or not) and got a popup telling me that my copy of windows 7 is not genuine. I tried to turn it on, but it has not been accepted as valid. I searched a bit on the Internet and found that the license key is linked with the BIOS of the motherboard, which may have been changed a month ago, so it seems to be the source of the problem.

  How can I solve it? Asking Microsoft for a new key to license, or Toshiba, or is there a simple procedure? I already tried the 'slmgr /rilc"and"slmgr /rearm"orders with no result.

  Recorded on label product key Microsoft belongs to the original version of recovery that you got with your laptop, so it cannot be used for activation.

  I can't explain why pre-installed version has expired, but you need to do now is install Win7 with original Toshiba recovery disc. After doing this you have will activate and original OS version that belongs to your laptop.

  I just hope that you created recovery disks Toshiba s advice.

• I have new asus GL725G fresh out of the box, the windows 10 and the nvidia geforce 960 m card video.

  PhotoshopCC seems to have a problem with the display driver boards how to operate?

  Hi cathygeo,

  You need to update your graphics card drivers: drivers | GeForce

  Kind regards

  Claes

• The Satellite A100 bios update does not work properly

  Hello
  I have a Satellite A100-153 PSAA9E and using the Vista operating system.
  How to install the new bios? I run the .exe and nothing happens it shows that it extracted the files and then a Notepad text that says something like that.
  '------------------------------------------------------------------------------
  "INVENEC pre Flash Script for SanAntonio10
  "26/09/2006 version 1.0.0.3.
  '------------------------------------------------------------------------------

  On Error Resume Next

  "= Declare Variables & objects"
  Dim WshObj, objArgs
  Dim WMIObj, chipset
  Dim InfoStr, WorkPath
  Dim VideoType
  Dim fso, represented etc...
  and then, an error which says that if the BIOS590MP.exe SanAntonion10 is installed correctly.
  pls help

  Sure it s is available for the Vista operating system!

  Take a look in the added value package!
  You can find the TOSHIBA components common driver which are an essential component of Windows Vista.

• "SHIFT" on the Satellite Pro C660 key does not work

  G ' Day,.

  I have a little problem with my laptop Toshiba Satellite Pro C660.
  Unfortunately I had to remove the keyboard and thus dislodged the
  fragile plug to connect to the computer.

  The 'Shift' key refused to work since. All other keys work as usual.
  The only problem is the 'Shift' button does not.
  I tried to gently move the plug but made no difference so now have to
  Use a USB keyboard.

  Can you please help with suggestions for this problem?
  Thank you for your time.

  See you soon,.
  Sunrap.

  I really put t know what you think when you know that there is no connection for each unique key, but for the entire keyboard.

  To be honest I ve changed keyboard several times but never noticed this problem.
  Are the two SHIFT keys off function?

• The camera on the Satellite A200-C00 application does not work

  My camera doesn't seem to work. He repeats to me that it is "locked by another application".
  Sometimes it works for a few seconds and then turns off. Also, when I want to configure video on Windows Live Messenger it says that windows cannot connect to this webcam.

  Someone knows how to fix this?

  Help, please.

  Thank you.

  Hello

  What kind of camera is it? Camera internal or external via USB? You can try to remove the software from the camera and simply install the drivers, without additional software.

  Perhaps some app takes the camera...

  Welcome them