Windows 7 does not recognize my CD/DVD drive...
I have a Compaq laptop with an Optiarc DVD RW AD - 7561A ATA drive, but it does not work after installing Windows 7. I tried to find a driver for it but no luck. It worked fine before with Vista before installing the new... Any help would be appreciated. Take care..
It's the old problem of filters upper and lower...
Read here for the fix The work expected auto fix, the manual fix will certainly never address a computer say or even think "I'll just do this quickly.
My trips on Format and Reload or Windrivers
Tags: Windows
Similar Questions
-
My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.
I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.
When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.
A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.
If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.
Hello
Try the microsoft 'fix - it' for your problem below
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
and read this information too
-
Computer does not recognize the CD/DVD drive
For these last days, my computer does not recognize the CD/DVD drive. I have tried everything - publishers of registry, check the physical connections inside the computer, the system restore and install Fix - It programs. However, the computer does not recognize this drive. I also wonder if it is a hardware problem. The light on the drive is a constant in green, and does not have the Open button. And when I use the bent-paper-clip-in-the-little-hole and can open the drive, it will not read the disc. Please advise...
I fixed my problem with the BIOS operating system & not recognizing not not my DVD player to reinvest the solder on the motherboard. You can find instructions on how to do it here: http://www.computerrepairtips.net/how-to-reflow-a-laptop-motherboard/
There was a little crazy with my video drivers when I started first, but everything works after resetting the BIOS by default.
-
Dell Inspiron 17R does not recognize the cd/dvd drive
I have a laptop Dell Inspiron 17R and sometimes it does not recognize the cd/dvd drive!
I tried to update the drivers with the system after the update, Dell detects the cd/dvd drive appeared in my computer and in Device Manager, but after 20 minutes, there was no. Any suggestions how to solve this problem?
Thanks in advance!
Hello
See if that helps you.
There is a "Fix - it" Microsoft for your problem on this link
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
If above doesn't fix it, continue with the help of Microsoft:
http://support.Microsoft.com/kb/982116/en-us
See you soon.
-
Windows vista Manager or the device does not recognize the cd/dvd drive
I have windows vista and it is not recognize my cd/dvd drive. When I click on my local drive (c :)) and recovery hp (d) shows up, I checked my device manager and nothing shows here either for my cd/dvd drive, so I checked the cable but it looks fine.) checked the files of the upper and lower register, but that fact so I just bought a dvd burner external made by polaroid that is USB2.0 and supposed to be plug-and-play, but when I connect it nothing happens nothing. the power turns on two cd players and the disc starts to spin but it stops after 15 seconds and I get nothing. I am confused and don't know what to try. Please help thanks. so I tried to use the running microsoft dvd set and the message I said 'dvd cd drive not detected '.
I tried these steps with no luck
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsHello mike salinas.
1. you have any third-party burning software installed on your computer?
2. have you checked if the external CD drive works on another computer?
I suggest that you check if your internal CD-ROM drive is detected in the BIOS.
Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer, but before I get to the BIOS to start Windows. Check to see if there is the CD/DVD drive in the BIOS.
You can see the article for more information about the BIOS:
http://Windows.Microsoft.com/en-us/Windows-Vista/BIOS-frequently-asked-questions
Regarding the external CD/DVD drive, I suggest you see if it works on another computer.
Thank you
Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think. -
Original title: my windows XP do not recognize an external hard drive.
I have Windows XP... When I try to plug in an external hard drive (with automatic installation of the software and the ability of usb 3.0/2.0), my computer does not recognize the material and gives an "error of malfunctioning of the device.
Hello
1. What is the brand and model of external hard drive?
2. don't you make changes on the computer before this problem?Read the following article that may help you resolve this problem.
Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/kb/310575 -
Windows Vista does not recognize my external hard drive, Eagle Consus AND-CS2PSU2-BK
I have an HP Presario laptop running Windows Vista and it does not recognize my external hard drive, or my flash drives.
I have an external hard drive Eagle Consus AND-CS2PSU2-BK. It worked fine on my desktop, which works on XP. I plug it to my computer laptop and nothing.
When I plugged it in the first place, he says that he needed to download the drivers. I clicked 'ok' to automatically download drivers and a few seconds later, he said that it successfully completed the driver download/install.
I look under the drives in my computer and he's not here.
I went to start, right click computer, left you click on Manage and double-clique then under storage disk management. All I see are C drive and recovery disc (D). No other drives displayed.
I exitted who and set up the Control Panel, double click on Device Manager. He said in the other topic peripheral USB to ATA/ATAPI bridge. I don't know whether or not it is my external hard drive. It indicates the Type of device: Other Devices and under device status it says: "the drivers for this device are not installed. (Code 28). This operation requires an interactive window station. To reinstall the drivers for this device, click on reinstall the driver. »
He asks if I want to reinstall the drivers, so I clicked that. He couldn't find them / install them.
Still, I don't know if USB to ATA/ATAPI bridge is still linked to my external hard drive.
Help, please. The same thing happens when I try to plug a flash/USB.
Try this:
In the right click 'USB to ATA/ATAPI bridge' Device Manager under the other devices section, click unsintall or press the delete key. Reset with the connected hard drive it must be reinstalled, but under the USB controllers. Make sure the device works on the other computer cable can also go to bad.b
-
My Windows 7 does not recognize my external hard drive
My Windows 7 does not recognize my Apacer AC203 external hard drive 640 GB. I test this drive on 2 laptops with Win7 and 1 PC with Win XP and on all computers of this it works fine without any problems.
Help, please. Al3k5aNd4R.
My problem is with the computer, no cell phone and I have solved.
I use the extension cable USB to my PC desktop. When I swich hd directly to the computer, then hd works...
I have the same problem on the computer of a work which is also usb extension cable and it also do not work. HD :)
Thanx for you're both.
-
WINDOWS does not recognize my cd/dvd drive
Windows stopped to recognize my cd/dvd drive. I can not read or write discs. I tried the Microsoft Mr.FixIt and it keeps saying "an unexpected error has occurred please try again later." I don't know what else to do. I've tried everything. The player is not yet in Control Panel under devices. And I don't know wut luk in the BIOS.
Hello
Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.I hope this helps and happy holidays!
Rob - bicycle - Mark Twain said it is good.
-
Satellite A205: Vista & BIOS does not recognize the CD/DVD drive
After a crash of the sudden family Vista system premium on a Toshiba Satellite A205 the system does not recognize the DVD CD - RW drive. Neither in Explorer, Device Manager, nor BIOS.
Laptop is only a few months old.
Have you tried the Toshiba check system - it ignores DVD disk check.
Tried Windows Update - does not help.
Tried registry fix - does not help.Cannot use the CD to reinstall all drivers - because it is not recognized.
The DVD drive LED is on. If the disk looks ok physically.Does anyone have an idea what to do?
Very strange what s
Try this:Access the BIOS and set the default settings and save the changes.
If it doesn't help then I put t see any other possibilities for contact ASP in your country for a CD/DVD drive control and possibly a replacementYou said that the notebook is only several months old so I assume that the warranty is still valid and that's why everything has to be done for free
Good luck my friend
-
Device Manager says: "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged (code 19).» Mr. Fix - it (Microsoft) indicates the CD/DVGW TSSTcorp TS-L632M ATA Device drivers & filters are corrupted or damaged. Mr. Fix - it could not download the updates/drivers for TSST. Mr. Fix - it has been able to get the computer to recognize, but unable to take the function of CD/DVD.
Hello
Perform the following methods and check if it helps.
Method 1:
Please run the difficulty of following article and check if that helps.
Your CD or DVD drive cannot read or write media
http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us
Method 2:
You can read the following article to see what might cause this problem.
When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052/en-us
If you had recently upgraded the computer to the Vista operating system or install the Service Packs, then try the steps as described in the following article.
The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461/en-us
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/
Hope this information is useful.
-
Professional Windows xp does not recognize my external hard drive 1 TB
I have a 1 TB seagate external hard drive and my windows xp professional does not recognize when I plug
Hello
1. were you able to use the same hard drive without any problem before?
2. have you tried to connect to check and another computer?
3. don't you make changes on the computer before this problem?See the following articles that might help you.
Why my computer does not detect my new USB device when I run Windows XP or Windows Server 2003?
http://support.Microsoft.com/kb/314634
A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive
http://support.Microsoft.com/kb/925196
Advanced troubleshooting tips for General USB for Windows XP problems
http://support.Microsoft.com/kb/310575 -
Satellite C series does not recognize the CD/DVD drive
Hello
I have about a week he did something wrong and now my laptop recognize my CD-Rom drive.
I guess I accidentally deleted the driver but I'm not sure of (I'm not a computer expert).
What now? Someone has an idea?Thank you!
Carina
+ The message was edited: translated by Google Translator.
Hello
I guess that you do not see the CD/DVD drive in MY computer area.
Right?I think I can help you
First go to Device Manager and search for CD/DVD drive.
Select this device and delete it from the list.Now, open the registry (type regedit in the search) and remove the filters above and below to the following registry key:
HKEY_LOCAL_MACHINE \SYSTEM \CurrentControlSet\Control \Class \{4D36E965-E325-11CE-BFC1-08002BE10318}The similar solution is located on the Microsoft page:
http://support.Microsoft.com/kb/314060 -
Windows 7 does not recognize Fallout 3 DVD - can not browse or run the Launcher
I have a version of Fallout 3, I could make it work fine on my Vista system. Now I have Windows 7 on a new machine and went for a new installation. The CPU does not seem to recognize the contents of the drive - unable to sail on him, does nothing when it is inserted into the DVD player. Ask me to format the drive if I drive to "run" then "D:\setup.exe".
How can I fix it?
I've upated Windows Live, but don't think that is the question.
It is a problem with your DVD player drivers more than probable. I try to download the drivers or the latest firmware from the site of the manufacturer of your computer and see if that helps.
-
Windows 7 does not recognize or play DVDs in the player
I have a Toshiba Satellite C655D under Windows 7 Home Premium. A few months ago, I noticed that some DVD would not play on my DVD player, but others. At first I thought it was just the DVD that I was getting their local library and the other that I got from Redbox worked. Now no DVD does not work. When I go to Windows Explorer with the installed dvd it shows nothing. If I right click on properties it wants me to install a CD and open the drawer. I checked Device Manager and reinstalled the driver software, nothing helps. Windows Media Center does not show a DVD or the other. The computer will recognize the CD and it will play videos from a cd in other formats, who told me that the laser works very well for the DVD player. I downloaded VLC, which is supposed to provide necessary codecs for most all files. I am at my witts on that end and would appreciate any help. Thank you
I have a Toshiba Satellite C655D under Windows 7 Home Premium. A few months ago, I noticed that some DVD would not play on my DVD player, but others. At first I thought it was just the DVD that I was getting their local library and the other that I got from Redbox worked. Now no DVD does not work. When I go to Windows Explorer with the installed dvd it shows nothing. If I right click on properties it wants me to install a CD and open the drawer. I checked Device Manager and reinstalled the driver software, nothing helps. Windows Media Center does not show a DVD or the other. The computer will recognize the CD and it will play videos from a cd in other formats, who told me that the laser works very well for the DVD player. I downloaded VLC, which is supposed to provide necessary codecs for most all files. I am at my witts on that end and would appreciate any help. Thank you
===============================================
There is a small chance that this article may be useful one
glance, but I suspect that your DVD player must be repaired or replaced.(982116) your CD or DVD drive is missing
or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
(Windows XP / Windows Vista / Windows 7)
Maybe you are looking for
-
Lack "+" tabs to open new tab.
Just installed FF on Win 7 4RC1; Nice and seems much faster. A minor thing has me a little confused: I'm missing the small '+' at the end of each tablet which are used to open a new tab. I have just the 'new tab' icon on the toolbar. I also installed
-
I disabled the menu bar and I am unable to restore it. Since I can not display as he went.
-
By pressing F12 put mobile on sleep
Hello
-
HP Envy 15-j163ei_ extremely unstable Touchpad
I have a HP Envy 15-j163ei on windows 8.1, and I got in trouble nervous touchpad. It's 2 weeks old, and I've had the problem before, so I uninstalled the synaptics drivers then installed later and it has temporarily solved the problem, but now it's b
-
Hello I have a problem on the data store when there is no database. first of all, I will write a file (not as a single file) Secondly, there are a few pages in this file Thirdly, there is some content in each page I'll look at all of the files that I