Windows 7, DW CS 4: Error: 148: 3 (error in the licensing process)

Similar Questions

• c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down

  Pls teach the procedure for resolution of the problems of this error message.

  Hi mac62sg,

  Remember to make changes to the computer before this problem?

  You can follow the steps mentioned in the article below

  How to solve an error "STOP 0xC000021A.

  http://support.Microsoft.com/kb/156669

  Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When a program is loaded, an error message Apparait-c:|windows\winsxs\---.dll is not compatible with windows or there is an error in the file.

  When a program is loaded, an error message Apparait-c:|windows\winsxs\---.dll is not compatible with windows or there is an error in the file. What should I do?

  Hello

  always check the compatibility of vista programs on the link below

  http://www.Microsoft.com/Windows/compatibility/Windows-Vista/default.aspx

  If a program is compatible with vista you can try right click on the setup.exe, and then selecting run as administrator

  It is not compatible with vista, you can try running it in a previous operating system mode

  This does not work for all programs

  read the information below

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

• I downloaded the latest version of the DNG Converter Camera Raw version 9.1.1 for windows. However, I get error install the update saying "error opening file for writing. Also on my help menu updates is not active?

  I downloaded the latest version of the DNG Converter Camera Raw version 9.1.1 for windows. However, I get error install the update saying "error opening file for writing. Also on my help menu updates is not active?

  If the installation program itself fails to open and run. Download it again maybe your current download is corrupted. Also, what OS you are using and you are an administrator with permission to install.

• STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt and recovery XP says error during the extraction process. Details of error: path not found___

  My friend turned on their laptop packard Bell recently and had the following problem. Windows XP screen loads but is then followed by a blue screen that says STOP: c0000221 {Bad Image Checksum}. The image rpcrt.dll is possibly corrupt. The header checksum does not match the checksum calculated.

  I can't the laptop to go further. I have accessed the Microsoft recovery Panel and try a non-destructive recovery as there are some precious photos that need backup. However, when you select 'no profile' to begin the recovery, I get the message:

  Error during the extraction process. Details of error: path not found

  I'm a bit of a novice when it comes to this sort of thing, but if someone can provide step by step help giving rise to lose photos, I'd be willing to give it a try. I also have XP Home Edition disk that came with the laptop but has never been opened. Any help would be appreciated. Thank you

  You hear your message said something about rpcrt4.dll?  It is important to relay the exact message you see.

  Please provide additional information on your system:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a CD/DVD drive work?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  You use some CD to access this Panel of Microsoft recovery where this "no profile" option is?  I don't know what all this means if it isn't some CD shipped with your system, in which case, I would use it for a coaster instead of something to fix your system.

  If the c:\windows\system32\rpcrt4.dll file is missing or afflicted, you do not start in the last good known Configuration.

  You also will not start in any kind of Mode safe no more.

  Even if you could boot mode safe, you would find that sfc/scannow does not work in Mode without failure in all cases (never).  If you try it, you'll see a message like this:

  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.].

  Failed to start the RPC mode server safe either.

  I can't recreate your error exactly, but it is easy to replace the rpcrt4.dll file.  Looks like you have a working CD drive, so put yourself a Hiren boot CD and when you started on this, you can copy your precious files to a USB device for safety.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  You need to rename or replace the rpcrt4.dll file which is in c:\windows\system32 and replace it with one you will find the backup copies.

  There should be a backup copy of rpcrt4.dll already on your system, here or here:

  c:\Windows\System32\dllcache

  c:\windows\ServicePackFiles\i386

  When you get the Hiren's CD's, you can use to replace the missing or suspicious file.  If you need help with that, first get the Hiren's boot CD made and start over, then we can continue.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision)

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  Hello

  I received the following error message

  "The remote computer has disconnected your session because of an error in the licensing protocol. Try to reconnect to the remote computer, or contact your server administrator. »

  This happens when I try to log on my remote on the icon access log, I put on my computer at home so that I can get to work if I need to.  He worked for a few months after I bought my new laptop and software, but now suddenly it doesn't.  I talked to my guy TI in the work and they seem to think it's a common problem with "Vista Home Premium", I can do to change it so that I can use the remote access icon?

  Thanks in advance

  Hello
   
  Licensing protocol handles the communication of information on licenses between your computer and the remote computer. If there is an error in the licensing protocol, your computer may not be connected to the remote computer.
   
  To resolve this problem, restart the computer and try connecting to the remote computer. If you continue to receive this error message, contact the server administrator.
   
  This also occurs if one of the registry entries is corrupt. Try the following steps to resolve this problem.
  1. Click Start, type regedit and press to enter.
  2. on the window of the registry editor, navigate to Computer\HKEY_LOCAL_MACHINE\Software\Microsoft\MSLicensing
  3. right click MSLicensing, click on export and provide a file name for example RemoteKeyBackup and click on save to the desktop.
  4. right click on the HardwareID key and store under MSLicensing folder and click on delete.
  5 restart the computer for changes to take effect. Restarting the computer will create new keys.
   
  NOTE: If the problem persists, then you can take backup of the MSLicensing registry key and to load it on the computer of the problem, this will fix the problem.
   
  Visit this link for more information:
  http://TechNet.Microsoft.com/en-us/library/cc756826 (WS.10) .aspx
   
  Important: Incorrectly editing the registry can cause serious problems on the computer.
  Back up the registry: http://windows.microsoft.com/en-us/windows7/Back-up-the-registry
   
  Try the steps and check the result.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Remote Desktop disconnected. The remote computer disconnected the session because of an error in the licensing protocol. Try to connect to the computer again.

  I understand there is a patch to 'fix' it, but I don't know how to access.  Can anyone help?   Thank you.

  Here is an article on this problem with a proposed solution - although it seems a bit risky.  I would create a point system restore and backup of the registry before trying. http://kjctech.net/2009/06/12/the-remote-computer-disconnected-the-session-because-of-an-error/.  The same answer is given by Microsoft here: http://support.microsoft.com/?kbid=187614.

  Here is an another artidle which includes essentially the same correction (although I didn't check closely to see if they were the same): http://www.techbuzz.in/how-to-fix-the-remote-computer-disconnected-the-session-because-of-an-error-in-the-licensing-protocol-in-windows-vista.php.

  The thing is, I can't find a clear answer, if this applies between two ordinary computers or between a server and a computer.  I hope that the solution works in both cases.  If this isn't the case, you can still use the system restore to go back to the old situation and we can try to find another solution.

  I hope this helps.  Keep me posted.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows Live Photo Gallery: 'an error prevents the library to save this picture.

  each 4 pictures that I'm saving I get this Windows Live message Photo Gallery: ' an error prevents the library to save this picture, I just save it again it works but his frustration.

  Hello

  The question you have posted is related to Windows Live, and would be better suited in the Windows Live forum. Please visit the link below to find a community that will provide the support you want. http://windowslivehelp.com/

• Windows Vista firewall problems. Error 1068: The dependency service or group

  When I try to Active my windows firewall I get
  the following message appears:

  "Windows Firewall settings cannot be displayed because the associated.
  service is not running. You want to start the windows firewall service? »

  The yes/no option.

  If I clicked 'Yes', another message appears saying:

  "Windows cannot run the Windows Firewall service.

  Okay, so I'm trying to start this service. I looked at the service
  status and stopped her, so I guess it must be started, if I click on
  beginning. However, the message:

  «Cannot start service on local computer windows firewall.» Error 1068: The dependency service or group
  Could not start.

  What else can I do to access the windows firewall?

  Hi elcri

  My apologies to zero you answer you earlier since May 3.

  I have to assume that the problem is still there?

  Allows to check and see if the ICS Service is running or not (we want to disable it if it is enabled/running)

  Click Start
  In the box, type start search in services of
  List programs, right-click on service , and then click run as administrator
  Scroll down the list of Services until you come to (ICS) ICS

  Is it enabled or disabled?  If on, double-click top and change startup to off and stop the service.
  Reset

  I would like to know if this solves the problem or not - thanks Ken
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Vista - I have an error in the registry

  I have a new laptop (used), and there is error in the registry, which is the best or fastest way to correct. I would like to change to Windows 7, but need help for the swap.

  Hello

  1. What is the exact error message?
  2. when exactly you get the error message?
   
  We need to help little more information for you.
  Please follow the link below:
  How to ask a question: http://support.microsoft.com/kb/555375
  
  You can check the links below, for assistance on upgrading Windows Vista to Windows 7:
  Upgrade Windows Vista to Windows 7: http://windows.microsoft.com/en-US/windows7/help/upgrading-from-windows-vista-to-windows-7 
  The upgrade to Windows 7: frequently asked questions: http://windows.microsoft.com/en-US/windows7/upgrading-to-windows-7-frequently-asked-questions

• Satellite 5105-S702 Touch ED error during the startup process

  When I start my Satellite 5105 - S702 laptop with the v8.4.0.24 of antivirus from Computer Associates (CA) software is turned on, I get the following at the end of the boot process error message:

  Error affected

  Recovery of the THotkey failed. "
  Part took place - TouchED.exe - (THotkeyFindProc)
  Function failed - FindWindow)
  Error code: 0 x 00031402, 0x00000002

  However, when I disable the CA antivirus software and restart the laptop, I don't get the error message.

  Thus, it would seem that the CA AntiVirus software causes this error message.

  Would be grateful if someone could give advice if they have this problem with this laptop model, or the Satellite 5105-S701, or European equivalent model 5100-603, and how they have rectified it.

  Thank you

  AlanCB

  Hello

  I agree with you.
  In my view the installed (CA) anti-virus software is not fully compatible with the Toshiba Hotkey Utility or the software anti-virus doesn't recognize properly and can not handle.

  CA anti-virus does not for me but maybe you could set some parameters to ignore the Hotkey Utility from Toshiba.

  Maybe it helps if not I recommend you contact Computer Associates support team.

• Error in the approval process

  Hi all
  
  I am a new bie to OIM 11 g. I developed a custom (single level parallel) composite approval and it works very well.
  According to my new condition, I need to add two blocks of approval set before the parallel approval block. Throughout the approval process contains 3 levels of approval with the third level as a parallel approval block.
  
  Level 1 approval will be a default approval and by default, all requests must be routed to this level.
  Based on a condition (create/edit/delete user), the request must be routed to the 2nd and 3rd level approval.
  
  In one scenario (condition), requests are routed to 1st, 2nd, 3rd level. In another scenario, requests are routed to approval level 1st and 3rd. In the two scenarios above, the request is completed successfully.
  
  In the last scenario (where lack of condition for the 2nd and 3rd level) the request is only forwarded the approval level 1 and not the other two levels. In this scenario, I get the following error, and demand is a failure.
  
  WLSPropertyUtils:getOperationName, the operation name is null
  Invalid result COMPLETED received the SOA for the id of the request 3058.
  [CALLBACKMSG] Plugin to change internal State for request 3058 and the status is: query failed.
  [CALLBACKMSG] Inside the plugin for adjustment of status to request 3058, target tye is resource and the operation is MODIFYRESOURCE.
  [CALLBACKMSG] Inside the plugin for adjustment of status to request 3058, target tye is resource and the operation is MODIFYRESOURCE.
  An attempt was made to search for unversioned
  resources global 'tail' of a version of the application "IOM [Version 11.1.1.3.0 =] '. This can potentially lead to conflict the uses of the global resource between multiple versions of the application.
  WLSPropertyUtils:getOperationName, the operation name is null
  
  Let me know if I am wrong anywhere or please suggest what to do to solve this problem.
  
  Thanks in advance for the help.
  
  Thank you
  PT

  Below you will find the link
  http://docs.Oracle.com/CD/E27559_01/dev.1112/e27150/request.htm#BABJGIFJ
  http://docs.Oracle.com/CD/E27559_01/dev.1112/e27150/request.htm#BABFIAIH

  check the mapping of "task results is REJECTING" and "results of the task is APPROVED.

• start failing after installing Windows XP firefox 12.0: error message: "the configuration is incorrect."

  After clicking on the icon of Firefox, I get the error message "this application has failed to start because the application configuration is incorrect".

  I uninstalled Firefox and deleted all the Mozilla files in my user account in the Documents and Settings folder. I installed the latest version of Java. Then I installed Firefox 12.0.

  I had this same problem when I updated my Firefox 11 to a later version of Firefox 11. I hadn't saved the old version of Firefox 11, and I couldn't find on the web, so I went back to Firefox 3.6. I am currently in Firefox 3.6.28.

  I'd like suggestions on how I could get over this stumbling block.

  Details of the configuration of my system:

  Version Java 6 32

  Name of the operating system Microsoft Windows XP Professional

  Version 5.1.2600 Service Pack 3 Build 2600

  System Type X 86-based PC

  Processor x 86 Family 6 Model 15 Stepping 6 GenuineIntel ~ 1867 Mhz

  Total physical memory 048,00 MB 2

  1.38 GB available physical memory

  Total virtual memory 2.00 GB

  Available virtual memory 1.96 GB

  Page file space 3.84 GB

  You can try to uninstall all entries of "Microsoft Visual C++" from the windows control panel and see if the error message disappears.

  (where another program on your pc depends on execution, it will display a dialog box when you start this program and offers you to reinstall once again)

• Window Live Photo Gallery "an error prevents the picture or video is displayed.

  I just downloaded Windows Live.  All my images are imported, but if I click on one to edit it I get the error message that an error is preventing the photo or the bideo appears.  I can run slide shows but I can't trouble photos or make photos in the menu.

  Thanks for your reply, but I found what the problem was.  I was looking for "pictures.pd6" and ran across a file called "OLD_Pictures.pd5" with a date 28/05/12.  That day, my nephew was messing around with my computer with an image and then I realized that he had to have done something right here.  So I went to restore and restored a date before that time and now everything works again.  Next time, I'll make sure that it doesn't change anything on my pc.

• cannot access windows for XP activation. Error States "the server down, try again later."

  I can't access windows for XP activation. States of error "server down, try again later". I can access all other websites, but none of the web sites of Microsoft. I can 'ping' other web sites BUT NOT Microsoft. This CD has been used before installing XP. All the files, I can change to get this activated copy?

  Any help would be appreciated.
  Thank you
  Patrick

  Try turning on the phone, if this does not work, you can contact Microsoft Customer Support Chat Service to activate your copy, you can check the link below:

  http://support.Microsoft.com/contactus/?ws=support