Windows 7 fsx mouse scroll to instrument setting buttons no longer works

Similar Questions

• New Notebook Laser Mouse 7000 - click on the button does not work so it is unusable

  If this is the wrong forum, please let me know. I couldn't find an obvious forum for mice. My old wireless mouse does so after much research, I chose a Laser Mouse 7000 and ordered online. I have download the drivers, follow the instructions for setting up and pressing the buttons, the installer with ALL THE BUTTONS by DEFAULT, reset and CLICK does not work. It acts like I am struck by right click. I tried moving, rearranging button settings, nothing works. When I go into control panel it says it is not working properly, but this certainly isn't. I also restarted x 2 to try to make the problem go away.

  It is a defective material, so should I just sent to the seller? That I've already lost too much time on this stupid thing. If I didn't always have a wireless mouse, I would not be able to use my PC

  Windows vista 64-bit standard

  Oh, I try the product. I have to enter the product number. It is very very small and very difficult to read, but I can enter the product correctly, I think. But here is the message that I will be back:

  "The product ID does not match the selected product.
  The product ID you entered is for Microsoft Wireless Notebook Laser Mouse 7000 (all languages), which is different from Microsoft Wireless Laser Mouse 7000 (all languages) you selected for support. Please enter the ID number of the product for Microsoft Wireless Laser Mouse 7000 (all languages) or click Select the product to select the right product. »

  WTF?

  Hello

  Microsoft Hardware Support access in the United States is 1-800-936-5700

  Dial the number and when he asks PID just say you don't know. You will need to give to the
  Tech answers so have a magnifying glass very convenient. There could be a more easy to read number on
  the receiver.

  Believe it or not, I had exactly the same experience with my entire keyboard and mouse, and I am
  in the meantime the new series arrived. Rob - bicycle - Mark Twain said it is good.

• Right click on my mouse button no longer works

  My operating system is Windows XP and I have a Dell PC. It seems that the right click stopped working after the latest windows update. Not sure about this, but it did not work and I can not understand how to get the menu to appear on anything (Web page, microsoft office product etc.). I went on the web to try to find a solution and downloaded a solution that doesn't seem to work. Can anyone offer any suggestions? I really need because I have many projects to come and do not have a right-click option is a big hindrance. using the shortcut method does not work for everything.

  Hello

  1. What is the number of KB updates that are at the origin of the problem?

  2 have. what troubleshooting steps you tried to solve the problem?

  3. do you have problems with a right-click on applications?

  You can attach the mouse on another computer running Windows XP and see if the same problem still occurs.

  I suggest that you check the number of KB updates that have been installed recently.

  There is no history of update for Windows XP; but you can see what updates you have installed on your computer by clicking on add or remove programs in Control Panel.

  To see what updates you have installed on a Windows XP-based computer, you must go through a different process.

  (a) go to the start menu in the lower left corner.

  (b) choose Control Panel from the menu.

  (c) find the icon Add / Remove programs and double click it to open it.

  (d) a list of the installed programs. To see Windows updates put a check mark in the Show updatescheck box.

  (e) now, you will see also all the updates that are on your computer.

  Please provide information on the update installed that could be causing the problem so that we can better help you.

• SideWinder X 8 right click the button and the scroll button no longer works

  the scroll button works more out of nowhere and shortly after also the button right of the mouse has stopped working, is in any way I could fix it? I tried to reinstall the software for this, after the scroll button does not, which did not help.

  Hello

  1. it works on another computer?

  I suggest you to follow the steps from the link below and check if it helps.

  Method 1:  Mouse, touchpad and keyboard under Windows problems: http://windows.microsoft.com/nl-BE/windows/help/mouse-touchpad-and-keyboard-problems-in-windows

  Method 2:  The problems with the mouse button or scroll the parameters

  http://support.Microsoft.com/kb/303091

  Hope this information is useful.

• PayPal buttons no longer work after the upgrade to Windows 10

  I have recently upgraded to Windows 10, but have always set my default browser on Firefox 39.0. Since then, I discovered some really weird things happening.

  It is more disturbing with PayPal buttons. I kept a few Web sites and, even though I made no changes to the PayPal coding, the button does not appear on pages when I view it in Firefox. I can see them in Chrome or MS Edge very well.

  Here is a page of one of the sites in question. : http://projectsister.org/ : this is a site created in WordPress. On the right sidebar, it would take a "Donate" button However, when I view it in Firefox, I see the slogan of PayPal ("PayPal - the safer, easier way to pay online how!")

  Here is another example of a site that was created using Dreamweaver. : http://www.villagekitchenshoppe.com/take_a_break_class.html

  So, as you can see, both of these sites have the same problem and they are not even related.

  Does anyone have this seen yet? Is there a solution I don't know? Any suggestions would be very helpful.

  Thank you!

  Firefox can display the "Alt" text for an image if the image does not load. The alternative text for the Paypal buttons orange is indeed "PayPal - the safer, easier way to pay online how! But why not load these buttons.

  What happens if you try to access it directly? Right click > view Image, or you can try these links:

  https://www.paypalobjects.com/en_US/i/BTN/btn_donateCC_LG.gif

  https://www.paypalobjects.com/en_US/i/BTN/btn_buynow_LG.gif

  (Note: mine include the language code en_US, which probably varies from one country to the other.)

  Many users Windows 10 have been posted on the problems to access secure sites (HTTPS, addresses). If you get errors certificate, they are on most of the HTTPS sites or just a few?

  Many HTTPS sites problems can be caused by Firefox is not completely set up to work with your security software. Are you not using Avast, ESET, Kaspersky, BitDefender or another program that intercepts your navigation for filtering?

  Problems on a smaller number of sites could be caused by other factors, individual on the site or resulting from content filtering (for example, parental controls).

• Double click of the mouse on the desktop icon shortcuts no longer works.

  Suddenly my mouse can move screen on the desktop page but double click on shortcut icons has no effect.  Must go to the bar at the bottom to open applications. Once in the application, the mouse works is great.  Problem is just Office page.  I have the edition of Windows Vista Edition Home Premium with a Norton security suite.  I restarted the system several times with no change in the problem.

  John of Kuyper

  ********

  Suddenly my mouse can move screen on the desktop page but double click on shortcut icons has no effect.  Must go to the bar at the bottom to open applications. Once in the application, the mouse works is great.  Problem is just Office page.  I have the edition of Windows Vista Edition Home Premium with a Norton security suite.  I restarted the system several times with no change in the problem.

  John of Kuyper

  353-561-4307.

  Try this...
  Start button > in the search box, type folder options > press the Enter key > general tab, under click items position as follows, click on the radio in front of double-click to open an item > OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Pavilion dv7-6c95dx scrolling on some web pages no longer works / freezes... ideas?

  Windows 7 64 bit

  No error message.

  The scrolling feature sometimes hangs on some pages web I open/download when you surf.

  I'd appreciate any help

  Thank you

  ceolrince

  Hello ceolrince,

  Take a look at this document http://goo.gl/6KDdA

  This document refers to the computer hangs or crashes when you play a game, but the same steps are used to check for the problem you are dealing with.

  Please let me know if this can help,

• XML, miniature scroll, charger image and buttons [to halfway works]

  Intro:

  I started a site based on flash a few years ago. In 2006, I was able to get a scroll of the xml thumbnail image, charger to work without problem.

  For many reasons, I had to put the project on hold until now. [one was that my 30 day trial of flash has expired and just recently I was able to buy Adobe CS4 Web Suite, but also a new computer that could run applications].

  Last Friday, saw a bump on the road in the development of my site as two, rather simple task, transformed into something out of a nightmare that I was unable to go beyond these two, apparently, a relatively simple task.

  I posted in 4 other forums flash issues, in detail, what I face - and I have a bit of interest/views in the topic as suggested by the figures - but not answer/response at the moment. [Which confirms other messages I've seen which suggest that work with buttons became more and more difficult with the new version of flash - thing Im a bit surprised with actually Adobe - I would have thought there would be a palette where you can define parameters...]

  Screenshot of the website/timeline:

  Before entering the two questions I have, I want to post an image of the site as it seems every time that a swf file is saved, but also a piece of the timeline in the back for reference.

  

  Question #1

  From now on, when the swf file is saved you get exactly what you see above:

  a: A miniature of scrolling

  b:.. who loads an image when you click on - PEFECT...

  BUT...

  1a: I need for the buttons load in this action, not so that it loads just on its own.

  [i.e., the silk_paintings Gallery is open, so I need the key "silk_paintings" to call this action]

  Note: Initially, I had attacked this problem by taking on the layer actions you see above and applying it directly on the individual buttons with some crude MouseEvent listener/Handerls... who does not work - at all.

  Im sure it can be 'easy' to make a table out of it, but with my level of coding, it can be "easier" to apply it to the buttons.

  1b: How I see currently, I take the list xml - and duplicate it for the number of galleries that I have.

  [I would then rename the xml list to reflect the name of the galleries that they represent, i.e. "silk_paintings"]

  [in addition, I have to rename the files to "thumbnails1, 2, 3, etc., & ' pictures 1,2,3, etc." "]

  From there I would be duplicate actions and paste it into the buttons, replacing the name of xml list by "silk_paintings", etc., as well as writing in the listener Manager MouseEvent to make it work. [ah, ha, but what is this magic phrase, I tried to implement different code to other tutorials and everything in the vein.]

  Question #2

  At this point, I'd be tickled pink just to get it to basic functionality for work.

  However, once the buttons are working and call the xml, etc., so I need the buttons stay on the semi-transparent blue color, it's every time in the State to 'hit '. [Note: NOT pictured above.]

  With the way the keys are currently implemented, and want to use scripts to interact with the Gallery of thumbnails, there must be some miraculous code to tell this button color to stay as every time that the user has clicked and of course it goes back to white when you click another button.

  Conclusion:

  Since it is an Adobe Forum, I would like to make some additional statements in the hope that developers, etc. can be considered.

  Adobes products are not cheap, and when I went to buy the websuite I went as long as designer in need of a program do not need to program.

  I understand the flexibility that gives coding, but something as simple that link buttons are not in the areas of rocket science. [Yes, for many, is not... but my brain just doesn't work this way despite all the tutorials that have been launched against me.]

  Yet once, it seems there will be a Panel button where you could if drag on options like thumbnail slider scroll, charger, then settings would come to the top. [much like Apple iWeb. - but before the argument a be pro and one for the non-pros, I see it differently. Software should not be the limiting factor in how flexible you can design, or rather those who lack programming should not be. [With all that talent and I say this with all humility and honesty, programmers working for Adobe, I'm sure something could be programmed like what Im request.]

  Note: the Director is a good example, in 1997 I knew nothing of the multimedia and in a week I gathered a portfolio, by clicking on the buttons, speeches, films and all. - and no, I don't have the money to buy more software!

  Right now I'm at the mercy of someone who reads the code as it's a night tale, they say their children, and who can see exactly the problem I have and you can share the appropriate, correct code. [as I noticed it, it must be on the target - of course - but this target changes with just a slight change in design.]

  Thank you

  peace

  Dalen

  p. s.

  The ActionScript: [note: this is only the current work/good code that Im trying to get the buttons to call.]

  
   stop();
  fscommand("allowscale", false);//keep SWF display at 100%
  
  var x:XML = new XML ();//Define XML Object
  x.ignoreWhite = true;
  
  var fullURL:Array = new Array;//Array of full size image urls
  var thumbURL:Array = new Array;//Array of thumbnail urls
  var thumbX:Number = 25;//Initial offset of _x for first thumbnail
  
  x.onLoad = function(){ //Function runs after XML is loaded
      var photos:Array = this.firstChild.childNodes;//Defines variable for length of XML file
       for (i=0;i<photos.length;i++) {//For loop to step through all entry lines of XML file
            fullURL.push(photos[i].attributes.urls);//Each loop, adds URL for full sized image to Array fullURL
            thumbURL.push(photos[i].attributes.thumbs);//Each loop, adds URL for thumbnails to Array thumbURL
            trace(i+". Full Image = "+fullURL[i]+"  Thumb Image = "+thumbURL[i]);          
            var t = panel.attachMovie("b","b"+i,i);//Each loop, Define local variable 't' as a new instance of 'b' movie clip, given unique instance name of 'b' plus the index number of the For loop
            t.img.loadMovie(thumbURL[i]);// Each loop, load thumbnail image from XML data into variable movie clip
            t._y = 0;//Set Y coordinate of variable movie clip
            t._x = thumbX;//Set X coordinate of variable movie clip based on variable thumbX
            t.numb = i;//Set sub-variable 'numb' inside variable t to hold index number
            t._alpha = 75;//Set the Alpha value of the variable movie clip to 75% - for onRollOver highlight action
            thumbX += 55;//Increment thumbX value so next thumbnail is placed 125 pixels to the right of the one before
            t.onRollOver = function () {//define onRollOver event of the variable movie clip
                 this._alpha = 100;//Set thumbnail alpha to 100% for highlight
            }
            t.onRollOut = function () {//define onRollOut event of the variable movie clip
                 this._alpha = 75;//Reset thumbnail alpha to 75%
            }
            t.onPress = function () {//define onPress event of the variable movie clip
                 this._rotation += 3;//rotates thumbnail 3 degrees to indicate it's been pressed
                 this._x += 3;//Offset X coordinate by 3 pixels to keep clip centered during rotation
                 this._y -= 3;//Offset Y coordinate by 3 pixels to keep clip centered during rotation
            }
            t.onReleaseOutside = function () {//define onRelease event of the variable movie clip
                 this._rotation -= 3;//rotate thumbnail back 3 degrees
                 this._x -= 3;//Reset X coordinate by 3 pixels to keep clip centered during rotation
                 this._y += 3;//Reset Y coordinate by 3 pixels to keep clip centered during rotation
                 this._alpha = 75;//Reset thumbnail alpha to 75%
            }
            t.onRelease  = function () {//define onRelease function to load full sized image
                 this._rotation -= 3;//rotate thumbnail back 3 degrees
                 this._x -= 3;//Reset X coordinate by 3 pixels to keep clip centered during 
                 this._y += 3;//Reset Y coordinate by 3 pixels to keep clip centered during 
                 this._alpha = 75;//Reset thumbnail alpha to 75%
                 holder.loadMovie(fullURL[this.numb]);//Load full sized image into holder clip based on sub-variable t.numb, referenced by 'this'
            }
       }
       holder.loadMovie(fullURL[0]);//Initially load first full size image into holder clip
  }
  
  
  x.load ("silk_paintings.xml");// path to XML file
  
  panel.onRollOver = panelOver;
  
  function panelOver() {
       this.onEnterFrame = scrollPanel;
       delete this.onRollOver;
  }
  
  var b = stroke.getBounds(_root);
  
  function scrollPanel() {
       if (_xmouse<b.xMin||_xmouse>b.xMax||_ymouse<b.yMin||_ymouse>b.yMax) {
       this.onRollOver = panelOver;
       delete this.onEnterFrame;
       }
       if (panel._x >= 740) {
       panel._x = 740;
       }
  if(panel._x <= (thumbX-10))  {
            panel._x = (thumbX-10)
       }
       
       var xdist = _xmouse - 830;
       
       panel._x += -xdist / 7;
  }
  

  The xml code:

  <?xml version="1.0" encoding="ISO-8859-1"?>
  <slideshow>
  <photo thumbs="thumbnails/i_brown_fairy.jpg"  urls="images/brown_fairy.jpg"  />
  <photo thumbs="thumbnails/i_blonde_fairy.jpg"  urls="images/blonde_fairy.jpg"  />
  <photo thumbs="thumbnails/i_flower_fairy.jpg"  urls="images/flower_fairy.jpg"  />
  <photo thumbs="thumbnails/i_red_fairy.jpg"  urls="images/red-fairy.jpg"  />
  </slideshow>
  

  Joint a link to the file that I did is named "index".

  https://RCPT.yousendit.com/706233226/5e7b4fe0973dacf090b5cbae32c47398

  I would have to include the following files but was limited because of 'you-send-it' does not download files.  Files not included: [but functioning]: miniature list xml - images [file] - [folder]

  Again, I thank you

  Dalen

  Would it be possible for you to download this file for me? It becomes increasingly difficult to follow what you're doing in this file when you are working only with descriptions. I have an upload of file available at: http://www.ddg-designs.com/client/blind.html . If you prefer, you can contact me via a private message on this forum to make other arrangements.

• Since the installation of Firefox 4, I get this message "TypeError: components.classes['@ [cid] is undefined" when a window should open. Also saw print and print no longer work correctly.

  Since the installation of the latest version of Firefox, this message "TypeError: components.classes['@ [cid] is undefined" appears in a box when should open a new window. In addition, what you see in the Preview Print print, is not which prints.

  Recovering important data over an old profile

  https://support.Mozilla.com/en-us/KB/recovering%20important%20data%20from%20an%20old%20Profile

  Check and tell if its working.

• HELP - after installing Windows "updates important' all of a sudden my software no longer works!

  I am a user of Final Draft 7 (writer) - not a computer expert.  I allowed the updates to be downloaded and installed, and suddenly my screenwriting software gives me an error message that says 'Windows has shut down to final draft' and if there is a solution, I will be notified, but then nothing happens.  I know I look stupid, but I don't have the time to become an expert on Windows.  I need my software to work with Windows to do my job!  Anyone know why this is happening and what I can do about it?  Help

  Hi pattitwalker,

  I would like to know the name of the Windows update that is causing the problem.

  Try to run the application in the clean boot state.

  Follow the instructions in the link below to put the computer in a clean boot state.

  http://support.Microsoft.com/kb/929135

  Put the computer to Normal mode after checking the issue.

  If this application does not work in the clean boot, we you need to do a system restore.

  Follow the instructions below to restore your computer to its previous state.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start, type System Restore in the Search box, and then click System Restore in the list of programs .  If you are prompted for an administrator password or a confirmation, type your password or click continue.
  2. In the System Restore dialog box, click choose a different restore point, and then click Next.
  3. In the list of restore points, click a restore point created before you started having the problem, and then click Next.
  4. Click Finish.

  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Kind regards

  KarthiK TP

• The saying Microsoft windows warning message a driver for Realtek AC 97 no longer works correctly.

  No rI TOST clear message and it recurrs constantly for the first half-hour when connect pc. He then moved. I'm told the driver Realtek AC 97 9ALCXWDM. (SYS) ha has stopped working properly, but an update is available to the Web to Realtek site. Tells me to click to go onlin eto their site it does. However when I look for /98se/ of 98Gold Windows Me / 2000 / XP for reader LectureSeule I just get "sorry no data found despite any permutation I use, not tried for an hour!

  I had access to their site to download General driver via google, but said it wants access to my system and check all drivers until daste those in need. I was skeptical about the safety of this but was so frustrated I undertake dto, run the program, but my system posted a warning saying found no registration for the site I was using so I aborted it immediately. Realtek also say that they save all the information on the disc in case the download is incompatible. If this is the sound slikea load expensive to fix hassle?

  Peut any an adviseme

  1 Microsoft sometimes give advice in this way to error reports? Address at the bottom of page seems authentic http:// wer. microsoft.com/responses/Response.aspx/764/en-gb/5.1.2600.200010300.3...

  2 I find site is not link to error response I'm sure we ethsi or someone trying to hack my PC?

  Help please!

  Reinstall the audio drivers.

  http://xpdrivers.com/sound-audio/_1_23.cfm

  http://xpdrivers.com/sound-audio/Realtek/_3_2362.cfm

• After HP Jet 7 updated to Windows 10, Start button no longer works

  Anyone else having the problem too? Any help is greatly appreciated!

  Pootin and Gznomonkey thanks!

  For all other hsers, facing the problem, download here! http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69305.exe

  http://ftp.HP.com/pub/SoftPaq/sp69001-69500/sp69305.exe

• Several sets of radio buttons no longer works

  Hi all:
  My first post so I apologize in advance if I don't do it correctly.
  
  I have a few web forms with multiple groups of radio buttons on them that are suddenly errorring on since we moved to CF 7. I started tinkering with a single shape that I posted the code and kept cutting down to simpler code which begins to produce the error. If I use only 1 group of radio buttons, everything works fine, but the minute I add the second, all up a message "syntax error (lack operator) in a query expression. Each radio button group has its own group name and a checked value. This is the very simple code and very frustrating, why it suddenly stopped working so any help is welcome.
  
  Here is the code for the form:
  <! DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional / / IN" " http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd" >
  "< html xmlns =" http://www.w3.org/1999/xhtml "> "
  < head >
  < meta http-equiv = "Content-Type" content = text/html"; charset = iso-8859-1 "/ >"
  < title > Untitled Document < /title >
  < / head >
  < body background = "white" marginheight = "0" marginWidth = "0" >
  < action = "testSub.cfm cfform" method = "POST" > "
  < table width = "95%" border = "0" cellpadding = "0" >
  < b >
  < td width = "24%" > < img src = "survey.jpg" border = '0' > < table > "
  < td width = "76%" > < p > This is our desire to ensure that this MID meets the needs of
  our customers. XXXXXXX
  < p > < / p >
  <p>*****************************************************<br>
  < /p > < table >
  < /tr >
  < b >
  < td colspan = "2" > < p > please answer questions 1-4 with a rating of 1-5, 1 being POOR and 5 being EXCELLENT. < /p >
  < p > you are not required to provide this information. < /p >
  < p > < police = "Arial, Helvetica, sans-serif" size = "2" > My Name (first & amp;
  The last): < / police > < police = "Arial, Helvetica, sans-serif" size = "2" >
  < cfinput type = "Text" name = "poc" required = "" size = "50" maxlength = "50" >
  < br >
  
  < b > 1. Has been
  your polite and courteous service technician? < /b > < br >
  < cfinput type = "radio" name = "polite" value = "1" >
  1
  < cfinput type = "radio" name = "polite" value is "2" >
  2
  < cfinput type is "radio" name = value "poli" is checked "3" >
  3
  < cfinput type is "radio" name = "polite" value is "4" >
  4
  < cfinput type = "radio" name = "polite" value = "5" >
  5 < /p >
  < p > < br >
  < br >
  2.
  your polite and courteous service technician? < /b > < br >
  < cfinput type = "radio" name = "knows" value = "1" >
  1
  < cfinput type = "radio" name = "knows" value = "2" >
  2
  < cfinput type = "radio" name = 'knows' value '3' = checked >
  3
  < cfinput type = "radio" name = "knows" value = "4" >
  4
  < cfinput type = "radio" name = "knows" value = "5" >
  5 < /p >
  
  < input type = "submit" name = "btnSubmit" value = "Submit my comments!" >
  < input type = "reset" name = "reset" value = "reset form" > < br >
  < br >
  < / cfform >
  < b >
  < td > < table >
  < td > < table >
  < /tr >
  < /table >
  < / body >
  < / html >
  ****************************************************************************************** **********************************
  The ACTION code
  < html >
  < head >
  < title > test < /title >
  < / head >
  
  < body >
  < IsDefined ("FORM.btnSubmit") CFIF >
  < CFQUERY NAME = "Add" datasource = "newMID" >
  (Survey) INSERT INTO
  POC,
  polished,
  not know
  )
  
  VALUES)
  "#poc, #
  "#polite #
  "#know, #
  
  )
  
  < / CFQUERY >
  < / CFIF >
  
  < cfoutput >
  Thank you. Your COMPUTER has been forwarded to our mailbox NHCPR IT.
  
  < / cfoutput >
  
  < intrusion via cfmail to = "[email protected]."
  FROM = "[email protected]".
  OBJECT = "investigation form" >
  
  Polish: #polite #.
  Find out: #know #.
  POC (opt.): #poc #.
  
  
  < / intrusion via cfmail >
  < / body >
  < / html >
  
  

  I think that TIME is a word reserved in most of the db - do not use it as
  table/column name, or use your specific db escape reserved words
  table/column names (i.e. in MS Access surround with [] like [time]

  HTH

  ---
  Azadi Saryev
  SABAI - Dee.com
  http://www.SABAI-Dee.com

• Microsoft Sidewinder X 8 inch top of page mouse button does not work?

  I bought a Microsoft Sidewinder X 8 mouse and my upper thumb button will not work. Is it a hardware problem or a software problem? I have reinstalled the software.

  Hi Crimson7789,

  1. this happens when you try it on any game in particular?

  This seems to be a hardware problem. You can see the following link for the hardware support:

  http://www.Microsoft.com/hardware/support/default.mspx

  Hope this information is useful.

• The mouse scroll wheel stopped working after windows updates

  I have a Targus optical mouse with a scroll wheel; and he recently worked like this: when you use the scroll wheel in multiple windows, it would scroll the window (to move the vertical scroll bar) goes up and down.  It was a huge time saver, and I was used to it.

  I installed recently a whole bunch of patches from microsoft, including Windows 7 SP1 and Microsoft Mouse and keyboard Center.  The device is not listed in the center of the keyboard and mouse MS, but there is always a control-> mouse Panel.

  In Control Panel-> mouse, it has still the tab saying "wheel" roll the mouse to a notch wheel to scroll the rows x number of rows (it is selectable, I had 3, but tried to change as well); but it no longer works.  Now, it seems, I have to press the wheel to click, which then shows a circular scroll up/down, icon, and then I physically move the mouse up and down, and if I push down to click again on the wheel, I'm back to a regular movement of the mouse pointer.  It's MUCH more inefficient than the use of the wheel, so I'll try to figure out how I can get the drive working again.

  Should I uninstall MS Mouse and keyboard Center?  I thought about uninstalling and reinstalling the driver; but there is no mouse listed in the Device Manager (only has my touchpad there...)  It's a Targus optical mouse amu10usz; and even once, it was working fine before the installation of upgrades...

  Thanks for any help,
  A.J.

  Hello

  What is the number and the model of the computer?

  I will suggest you to check the mouse with different USB port or another computer, still question remains the same! Follow the mentioned methods:

  Method 1:

  Step 1:

  Update driver mouse

  a. click on start.

  b. click on Panel.

  c. using the drop down next to the opinion of: in the upper right, select large icons.

  d. click on mouse.

  e. click on hardware tab, click the Properties button.

  f. click on the driver tab, click set to update driver.

  Step 2:

  Uninstall the recent update and look for the question. You can first of all uninstall the update MS Mouse and keyboard Center and check.

  http://Windows.Microsoft.com/en-us/Windows7/remove-an-update

  Method 2:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 3:

  The problems with the mouse button or scroll the parameters

  http://support.Microsoft.com/kb/303091

  I hope that helps!