Windows 7 hassle - WGA and update

Similar Questions

• I can not open hotmail attachments (updated Automatic Windows Vista, IE8, activated and updated running).

  I have a new HP computer and I can not open hotmail attachments (updated Automatic Windows Vista, IE8, activated and updated running).  When you try to open an attachment, the bar downstairs quickly moves to the right, but never appears a dialog box asking if you want to open or save the file.  Error message I get when I try to resolve it with the suggested steps indicates "module"wintrust.dll"was loaded but the call to DllRegisterServer failed with error code 0x80070005.  I tried to do the same command prompt, but still not received the same error.  Thanks for help anything.

  Hi Paul,.

  Have you tried to download an attachment after you turn off your antivirus?
  I had a problem in the past where the system was performed at Trend Micro Internet Security and Web content filtering (I think that's what it was called) was preventing attachments from download.
  I would like to know what are your results!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• After you have reinstalled windows 7 Ultimate edition (and update), my monitor drivers are gone

  After you have reinstalled windows 7 Ultimate edition (and update), my monitor drivers went (poster generic non-pnp monitor Device Manager). I have viewsonic va1916w monitor, and I can't find the drivers on the official website of viewsonic. Where can I find it?  Thank you

  Drivers for Vista & Winxp, the two bit versions are available on the website of decision makers

  http://www.ViewSonic.com/products/archive/va1916w.htm

  The issue may have been caused by updateing your system drivers from somewhere other than your PC manufacturers or the motherboard manufacturers site, in the case of a generic desktop computer

• Updated to firefox9 and now when I use extension of tree style tab the screen goes black, with the exception of the "window of the tab" and the part of the screen behind him

  Update firefox9. Using tree style tab extension. Everything works fine, except that my screen goes black when in 'tab window', with the exception of the window of the tab and the part of the screen behind him. Once out of the tab section everything comes back fine, but it is rather annoying. Checked homepage for the extension and have the updated version, firefox add-on page - it also says that it is compatible. Any ideas on that?

   Am realizing pages will stay on as long as I don't move the mouse,but as soon as I do move it,black goes the screen.
  

  Ok. A installed version 1.4? Manufacturers homepage. This is apparently what caused problems. Get rid of this and installed version 1.3? Since firefox add on the pages. Problems solved...

• Pavilion g6: my laptop stuck after its original windows is installed and updated drivers

  Hello team HP;

  I recently get the support of the HP team and installed my original windows 7 Home premium using my product key. Then installed the updates wireless, Internet and network at home, but in a short time, my stuck laptop and keyboard no could not work at all except the power button. Then I installed my original windows 7 Home premium and it is, I can access although I could not installed other programs and my personal ducoment.

  My computer laptop detials:

  Note the model: HP Pavilion Notebook PC g6

  Model: g6-1320so

  So please help my problems, I don't know what to do?

  Thank you

  Hi @EID

  Thank you for your query.

  I understand that you did recently resumed, reinstall your original Windows 7 with the help of HP.  You were then installation updated drivers when the laptop froze and the only thing you could do was power, it works. You then reinstalled Windows 7 again, but can not install other programs or your personal documents.

  Have you tested for hardware failures? Screening of hardware failures (Windows 7, Vista )

  Have you checked against viruses and malware?  Malicious software removal tool

  Like you just HP support help with your original Windows 7 installation and the problem appeared after that, I suggest you contact HP support for assistance, especially since you have reinstalled again and are always problems.

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  Good luck!

• ElitePad 1000 G2: 10 Pro Version 1511, threshold 2 update Windows crashes on 'features and drivers '.

  Summer running Windows 10 Pro 64-bit for months without problem on my G2 ElitePad 1000; application Windows 10 updates throughout - so far. Yesterday, 12/11/2015, 1511 (threshold 2) updated version of Microsoft automatically downloaded and rebooted to start installation of operating system upgrade. The upgrade completed the first phase "Copying files" and began the second phase "Patterns and drivers", then stopped (paused) to 40% total progress/23% features and drivers progress with no other response. Only one stop 'hard' (hold down the power button / stop for at least 10 seconds) worked. On 'power up' the result was a "restore previous version" immediately, and subsequent reboot restored my previous login - as expected.

  HP have a new image or update for Windows Pro 64 - bit version 1511/threshold 10 2? The update is put on hold due to a driver issue? Any advice would be appreciated.

  Finally, a solution for me! I used Microsoft's latest "MediaCreationTool" (as of 11/13/2015) to download and create a "USB stick" (08/01/2016) upgrade support. Stick created USB contained more than 3 GB of content upgrade. Started my ElitePad in my 10 original Windows operating system upgrade, and then insert the USB in my ElitePad. Launched "Setup.exe" on the USB key to start the process to level, and left the USB connected until the upgrade is completed; several reboots of the upgrade. Once launched from Setup.exe, a menu background blue proceeded and displays "Check updates" for more than 15 minutes (check the updated drivers, etc.), and then proceeded to the display of the upgrade process (progress circle GUI). The upgrade has completed in 90 minutes without a hitch. So far, all programs and functions are intact. I guess that is focused on the HP drivers updated (finally) in the current construction of 1511, and/or the last created USB stick media works where Microsoft Update (via Microsoft Update servers) has a problem. For me, this solves my problem to upgrade v1511. I hope this helps others.

• I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

  Hi Happyrockgeek,

  Welcome to Microsoft Windows 7 answers Forum!

  This problem occurs if the Windows security .dll files are incorrectly registered.

  To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
  Method 1:
  Run (Checksur.exe) system update readiness tool.
  To do this, follow these steps:
  1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
  http://support.Microsoft.com/default.aspx/KB/947821
  2. try to install the updates again.
   
  Methods 2.
  Reset the Windows Update components.
  1. to reset the Windows Update components automatically, click the fix button in the link below.
  http://support.Microsoft.com/kb/971058 
  2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

  I also suggest you to install the latest version of Windows Installer 4.5.
  Follow the link below to download:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
  and you can also try to install after you turn off the firewall.
   
   
  It will be useful.
   
  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum.

• The Windows Firewall, Defender and updates among other things aren't working properly, a message that sqlite.dll is missing

  I suspect a virus, but I already checked with, Avira, Avast, Malware Bytes, killer TDSS, Norton and Mc Caffe

  Original title: my computer firewall windows defender Center action and the site Web of the Microsoft and Apple do not work as well as Windows update and Windows keeps giving me a message missing sqlite.dll?

  Hi, a G account,.

  You have recently uninstalled software?

  Reinstall and see if the problem persists.  If this is not the case, look for a tool to uninstall on the manufacturer site to uninstall again if you do not use.

  http://www.SQLite.org/download.html

  Start in safe mode and run a full scan to ensure the malware has not invaded your system.

  Restart and start typing the F8 key

  Select Mode safe mode with networking

  Download the following and run a full scan

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

  Causes of sqlite.dll errors:
  1. a sqlite.dll is removed when a program has been uninstalled.
  2. when a program has been installed, a sqlite.dll was crushed and replaced with an older version or a version that is not compatible with other programs.
  3. an installation fails a program.
  4 equipment failure issues arise.
  5. your computer is infected with the virus that deleted an express sqlite.dll

  6. invalid or damaged sqlite.dll entries in the Windows registry.

• You can load the update of windows on the computer and then one more

  You can load the update of windows on the computer and then one more

  You can load Windows * updates on multiple computers. Should not be confused with * updates *. TaurArian [MVP] 2005-2010 - Update Services

• BSOD in Windows 7 since the addition of Office 07 and updates Windows.

  How can I keep my computer from HP 1 month (Windows 7 Home Premium 64-bit) to close down and blue-screening at random times?  First thing I did when I got it was to slowly add programs I used on XP safely in the past.  I run Comcast w/McAfee and virus scan came negative.  However, just recently, I added Microsoft Office 2007 Ultimate Steal and updates the Microsoft appearing to all appropriate... I think that's when the trouble started.  Since then, I had random and/or closures crashes.  All the expert advice would be appreciated.  Thank you!!!

  Here's a common reason is given:

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 1a
  BCP1: 0000000000041790
  BCP2: FFFFFA80036FA470
  BCP3: 000000000000FFFF
  BCP4: 0000000000000000
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\123109-17035-01.dmp
  C:\Users\Paul & Laura\AppData\Local\Temp\WER-34491-0.sysdata.xml

  Bug Check 0x1A: MEMORY_MANAGEMENT
  A value of 0x0000001A MEMORY_MANAGEMENT bug control a. This indicates that an error occurred serious memory management.
  [Source: http://msdn.microsoft.com/en-gb/library/ms793604.aspx]

  This management mistake of memory is usually hardware related...
  [Source: http://aumha.org/a/stop.htm]

  Bug Check 0 x 50: PAGE_FAULT_IN_NONPAGED_AREA
  PAGE_FAULT_IN_NONPAGED_AREA bug control has a value of 0 x 00000050. This indicates that invalid system memory was referenced.
  [Source: http://msdn.microsoft.com/en-gb/library/ms793437.aspx]

  The requested data were not in memory. An address of invalid system memory was referenced. Defective memory (including main memory, L2 RAM, RAM video cache memory) or incompatible software (including remote control and antivirus software) [emphasis] may cause this stop message, as may other hardware issues (for example, incorrect SCSI termination or imperfect PCI card).
  [Source: http://aumha.org/a/stop.htm]

  I don't think that the problem has nothing to do with after installing Office Ultimate 2007.

   

  -Online if the computer came with a free trial preinstalled, Norton STOP HERE! and reply to this message.

  ===============

  It is possible that the application of McAfee is originally these STOP errors. Discover:

  1. download the Setup program for Microsoft Security Essentials * (MSE), save the download to your desktop: http://www.microsoft.com/security_essentials/default.aspx

  2 close all applications (anything with an icon on the taskbar) open and repeat steps #1 and #2 (only) of the solution triple McAfee & reboot.

   

  3. IMMEDIATELY to make sure that the Windows Firewall is on 100%!

  4. close all applications (anything with an icon on the taskbar) open then right click on the file that you saved in step #1 above and select run as administrator to install MSE; Follow all the instructions.

  5. after the restart, manually & repeatedly updated MSE until you get one invite 'no more updates'.

  6 test cycle.

  If the behavior persists, contact HP Support as soon as POSSIBLE under your warranty or Service contract.

  ------------------------------------

  
  * I'm only using MSE as a Guinea pig here. You don't necessarily have to leave installed when we're done with our troubleshoointing but I wouldn't reinstall McAfee freebie just yet IIWY or if install any application of Norton.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• XP is slow after all service packs and updates. Is there a summary of Windows XP that includes all upgrades and runs FASTER?

  I reformatted my Dell 2.4 ghz pc (only 512 MB of ram) to the original state of xp. It was incredibly FAST.  But to run programs, I was forced to upgrade to service pack 2. Service this pack 3.  It is slower than molasses in January in Chicago.  Microsoft has an XP consolidated and updated that includes all the security updates and new features in 1 integrated fast program?

  Spin Norton - bought after that it came with the machine.

  Ah! Norton applications are notorious for not not upgrade (or uninstalling) itself. This gives a whirlwind:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Add/Remove Programs.

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of your Norton application, using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  TIP: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate until you get a prompt "no update more".

  8 test cycle.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Cannot install updates windows (KB973593), (KB973704), KB976416) and (KB974561).

  I can't install Microsoft Office Excel 2007 (KB973593), Microsoft Office System 2007 (KB973704), Microsoft Office InfoPath 2007 (KB976416) and updates of Microsoft Office Word 2007 (KB974561). After installation and restarting Windows, my updates are still there. I installed them manually, but that doesn't seem to work.

  Hello

  Do you really need these updates? If they are installed you can right click on it in the control panel - Windows
  Updates and HIDE.

  Try this 1st to see if it helps, and it should:

  Description of the Patch registration cleanup tool
  http://support.Microsoft.com/kb/976220/

  ------------------------------------------------------

  If necessary :

  Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
  or the update itself - double click a view more information (or click top then discovers on the right)

  Those who will take you to a page where you can download the update.

  Or go here and the KBxxxxxx number to download it.

  Download Center - mount the KBxxxxxx.

  Microsoft Download Center
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to where you put them - click on - RUN AS ADMIN

  Then you can right click on the update in the updates Windows and HIDE.

  If you get an error Installer install this version:

  Windows install 4.5 Redistributable
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  ----------------------------------------------------

  Then run this:

  How to reset the Windows Update components? -a Mr Fixit
  http://support.Microsoft.com/kb/971058

  Description of the system for Windows Vista, Windows Server 2008, update tool and
  for Windows 7
  http://support.Microsoft.com/kb/947821

  ------------------------------------------------------------
  Because these are all Office updates you might get more information if necessary in the Agency of those groups that
  may have experienced the same problem.

  Office newsgroups
  http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

  Microsoft.public.office.misc discussions
  http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

  ------------------------------------------------------------

  If necessary, you can get free reports of incidents.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error Windows Updates ' "lack of details: updates Windows has corrupted operating system." " "Needs a remastering and updates the resettlement".

  We bought my son an ACER laptop in May this year (2014) as a birthday present and (hopefull) for use
  University (he won a place).
  Yesterday, the laptop has stopped working and just turned off.
  We took it back to the Currys PC World store (2222 Liverpool Aintree Branch) to fix them.
  They decided that it was not a warranty issue and that: - (I quote)
  "The fault details: updates Windows has corrupted operating system." "Needs a remastering and updates the resettlement".
  I have this in writing.
  It cost my son, a student, £50 and is without his laptop when it nears its first round of reviews.
  I need your answer before deciding on my next step.

  We bought my son an ACER laptop in May this year (2014) as a birthday present and (hopefull) for use

  University (he did win a place)... Yesterday, the laptop has stopped working and just turned off.

  Buy you a Windows XP computer brand new in May of 2014, is that correct?

• Windows xp has been partially updated and may not work perfectly

  To install the 3 XP SVC pack... Neede Svc Pak 2 do following error Yes, obtained by attempting to do so.

  Windows XP has been partially updated and may not work perfectly

  Hello

  -You installed correctly updated recently?
  -You are aware of any changes made on the computer before this problem?
  Method 1: I suggest to maintain the computer in clean boot mode and check if the problem still persists.

  Step 1: Clean Boot Mode
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, refer to clean the start link to configure the computer to normal startup mode.

   

  Step 2: Manually disable the Antivirus

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 3: Install Service Pack 2 (SP2)

  http://support.Microsoft.com/GP/xpsp2getinstall/ja

  http://support.Microsoft.com/kb/875364

   

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

   

  Include to determine which SP1 is installed

  http://support.Microsoft.com/kb/310104
   
  Method 2: Follow the steps mentioned below and check if the problem persists.
   
  Step 1: Microsoft Windows Update Agent tool
  How to get the latest version of the Windows Update Agent?
  http://support.Microsoft.com/kb/949104
   
  Step 2: Try to install the updates and check if the problem persists.
   
  Method 3: Try to download and install the Windows XP SP2 and SP3 manually and check if the problem persists.
  For Windows XP SP2:
  Windows XP Service Pack 2 network installation Package for IT professionals and developers
  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=28
  For Windows XP SP3:
  Windows XP Service Pack 3 network installation Package for IT professionals and developers
  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=24
   
  Hope this information helps.

• alert security Windows may be disabled, and automatic updates cannot be activated

  I downloaded and ran Microsoft Security Essentials, Malwarebytes, Glary Utilities, Advanced Windows Care, SuperAntispyware, and nothing seems to disable these WINDOWS SECURITY ALERTS that appear every time I start the computer.   I can not turn ON the automatic Windows Update, and the DIFFICULTY IT CENTER that displays an error and then closes, advising me to go to this FORUM.   Can someone give me please a different direction.   Thank you.

  Hello

  1. What is the exact error code or error message that you get while you run the fix it Center?

  2 would. what Fixit you perform?

  3. what happens when you turn on automatic updates?

  I suggest you to follow these steps and check if that helps.

  Method 1:

  Check if the Security Center service is turned on.

  To do this, follow these steps.
   
  a. click Start, type services.msc and press enter.
  b. double-click Security Center.
  c. set its Startup type to automatic.
  d. define the status of services to Started.
  e. click OK.

  Method 2:

  Set the date system and the hour correctly according to the time zone that you belong

  HOW to: Change the Date, time, number, and currency value displays in Windows XP:

  http://support.Microsoft.com/kb/307938

  Method 3:

  Run the file system (CFS) checker.

  Steps to perform a scan SFC:

  a. click Start, click principally made programs, Accessories, and open the command prompt.

  b. type the following command and press ENTER:

  sfc/scannow

  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]

  Once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link for more information on Scan SFC below mentioned: http://support.microsoft.com/kb/310747

  I hope this helps.