Similar Questions

• Where to download Windows 7 Home Premium 64 - bit SP1 pack, how to reinstall, I have a product key

  I have the product key for Windows 7 Home Premium 64-bit. Where can I download it so I can reinstall on my laptop which has been often blocks? Disrupting my work. If you can please send me the link where I can download as soon as possible. Thank you very much for your help!

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

• Trusted sites to buy the product key Windows 7 Home Premium 64-bit?

  Trusted sites to buy the product key Windows 7 Home Premium 64-bit?

  Windows 7 product keys are not sold separately, any site claiming to sell Windows 7 product keys are sold separately no doubt hoarded non-genuine product keys from TechNet and MSDN subscriptions.

  Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  Amazon.com: windows 7 oem

• I have a product key, but need to ISO of Windows 7 Home Premium (64-bit)

  I got a laptop HP of USA. I want reinstroll Windose 7 Home Premium 64-Bit. I have a product key, but I have no CD/DVD backup. I also do ' t found ISO. Y at - he a soliosion? Please give my ISO.

  @JW and @Andre

  I'm not sure that this guy knows what he wants...

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/i-need-Windows-XP-Home-Premium-32-bit-ISO/70528b39-b7a4-4553-9687-bc5bba0a8dc4

  Tricky

• install windows 7 Home premium 64-bit, already have the product key

  Dear Sir or Madam
  I want to format my laptop and reinstall windows 7 Home premium, but I don't have the windows cd. I already have the product key as it is written on the bottom of my laptop. I would like to ask if I can reinstall windows and use this product key (on the same laptop) it came) and if possible, I would like to give me a link to download windows 7 Home premium 64-bit.
  Thank you

  You have this program installed on your laptop, which he describes on page 25? If you do, you should be able to do the restoration using the top option that restores the default values.

  http://global-download.gateway.com/GDFiles/document/generic%20UG/generic%20UG_eMachines_1.0_A_A.zip?acerid=634030969944803793&STEP1=notebook&Step2=E SERIES & stage 3 = E525 & OS = ALL & LC = en & BC = EMACHINES & SC = PA_6E

• I lost my disc of Windows 7 Home Premium 64-bit OME. Can I use a disc of Windows 7 Home Premium Family Pack 64 - bit with my product key OME to do a re-install?

  I lost my disc of Windows 7 Home Premium 64-bit OME. Can I use a disc of Windows 7 Home Premium Family Pack 64 - bit with my product key to make a re-install?

  My father still has his Win 7 Home Premium Family Pack disc left, would that be a problem using it.
  I lost my disc of OME, but I got the product key on my PC, so I still have that.
  Or if there is another way to re - install Windows without a disc?
  Kind regards
  Peter

  Hi Peter,.

  Yes, you can use the same product key when reinstalling windows.

  Note: If you are facing a problem while activating, I recommend you contact the factory system since you are using an OEM computer.

• A backup copy of programs of productivity on a windows 7 Home premium 64-bit PC back to a new windows 7 Professional 64 bit PC?

  My task: I backed up all productivity software to a windows 7 home premium 64 - bit PC (which is currently retired) on an external hard drive. I want to use several of these programs on a new PC running windows 7 Professional 64 bit OS. I think I may have several ways to accomplish this task and seeks your advice on the following techniques.

  1. I could remove the hard drive from the old PC and use it as a second hard drive in the new PC. If I do that I must leave the operating system on the drive?

  2. can I just restore my backup to the new PC?

  3. even though I have the original program CD, license restrictions limit the number of times, some programs can be installed and activated. I have addressed the issues of licensining to several software manufacturers of my software, including shade (by PaperPort, Omnipage, etc.) and am waiting for answers.

  4. I also consider the creation of a system dual boot, but I believe that the windows 7 Home Edition premium OS should be the default OS. This change would probably cancel my warranty with HP.

  5 Please, don't limit your answers to the above ideas. I would appreciate your help or suggestions on the best way (if any) to accomplish my task.  Thank you.

  Programs don't return because there is more than one program that just running the main folder.

  When a program installs it puts the files in the Windows system folders. If these files are not present in the active operating system, they most likely will not work. Much depends on how dependent of the program is on files in system folders.

  If you have the original CD for the programs in question, re - install. Relative to the license, as long as the programs are installed and running on a single computer ONLY, there should be no problem at all...

  When you program discs, there is no point in dual-boot. Don't make life more difficult for yourself...

• 4540 proBook s product C9K7O ID: Device Drivers not installed during the installation of Windows 7 Home Premium 64-bit

  I had to reinstall Windows 7 Home Premium 64 bit operating system and some of the equipment not recognized and therefore, the drivers were not installed. Can you tell me the correct drivers? That's what I see in Device Manager:

  Here's the driver page.

  http://h20564.www2.HP.com/hpsc/SWD/public/readIndex?sp4ts.Oid=5229456&swLangOid=8&swEnvOid=4057

  There is a full menu of Windows 7 just pull down the menu for Windows 7 Home Premium 64 bit drivers.

  The Base system is the JMicron card reader.

  Ethernet is Realtek gigabit

  USB is Intel USB 3.0

  1 unknown is 3D Driveguard

  2 stranger's validity

• Inoperative"HP Support Assistant" on a HP Pavilion p7-1254 to help de-Windows 7 Home Premium 64-bit

  Product name: HP Pavilion p7-1254

  Operating system: Windows 7 Home Premium 64-bit

  Error message: HPSF.exe has encountered a serious problem and needs colse.  Click 'OK' to outomatically restart this application

  Changes to the system: NO

  When the error occurs?  Is this a feature repeated at startup or at another time?  Updates to the system recently (Windows Update or other updates from HP support)?

  The normal solution for most of the problems with HP Support Assistant is to uninstall the application from the control panel / uninstall a program.  Then download and install the latest version of HP Support Assistant from the HP Web site:

  HP Support Assistant

  Search the topic download HP Support Assistant and select laptops or desktop computers, according to the case.

• Presario CQ56 Windows 7 Home Premium (64-bit)

  I listened to people who have claimed to be experts, big mistakes. I bought this laptop used. Compaq Presario CQ56 with problems. I had reformatted it and Windows 7 (64 bit) relocated to Arkansas, it's over. I had an another 'Expert' work on that here and now, is that he put a pirated copy of windows on it. I have some experience with computers from DOS to Windows 98. I also have a desktop computer with Windows XP I've worked with some. I am now located in the Philippines and need to get a copy of Windows 7 Home Premium (64 bit) so that I can try and restore my computer to original factory. What I need, is the drive installation and instructions on how to do it properly. There, any help will be appreciated.

  Hello:

  My recommendation is to have a friend or relative in the USA order a set of recovery discs for your laptop from the link below and send them to you.

  They would need to be able to enter the serial number of your PC.

  To order, they click on the link below and then click on the link labled order recovery media.

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5048730

• How to upgrade the graphics card drivers sony vaio laptop computer vpceb45fg Windows 7 home premium 64-bit?

  How can I update the graphic card drivers in sony vaio vpceb45fg laptop Windows 7 Home premium 64-bit runningt?

  Hi simran1976,

  Use the link below to download and install the video drivers:

  http://www.Sony.co.in/support/product/VPCEB45FG#

  http://www.Sony.co.in/support/product/VPCEB45FG#

  If my post answered your question, please mark it as an "accepted Solution".

• H9-1150 Pavilion: H9-1150 PC does not start with WIndows 7 Home Premium 64-bit with ASUS 960 GTX card.

  I've seen others have posted simular questions, but I thought id repost this even in the case where there is more help.  I have the Elite Phönix Pavalion h9-1150 desktop with Windows 7 Home premium 64-bit.  and the bios HP 7.07 (seems no possible to upgrade the bios).

  As others have had I install the new graphics card, the 960 Asus GTX card that came out last month and the system start gives about 3 beeps in about 30 seconds and then it goes to a screen that is black with a blinking cursor and nothing else happens. cannot enter bios or settings for HP...

  I tried to disable UEFI boot devices in bios settings and enable only the legacy devices (after him swinging back on my original card, then move on to the new card), but it still gives 3 beeps after the start.   However, I was able to get into windows. Although I think that this may be due to turn off the computer with the old card in without power first. and after 3 beeps (which always blocks you on the bios menu) sometimes it appears the window where you can select the safe mode or normal mode... as sometimes happens if you start your computer with windows 7 If you had just it off without turning off power or something.  There, I can get into windows and run the PC and graphics card without problem, it's just when I try to start the problem happens.

  and suppor HP no. is NOT a fault of the card itself. As much before. I bought an EVGA card earlier a GTX 780 and SAME problem happened (although I have not tried to remove it then devices boot UEFI)...

  There is a problem of spacific with HP computers that seem to lock 'new' start-up equipment.

  Honestly not be blunted. I really think it's bad what I read somewhere that even if HP would never say it they do it on purpose to prevent people ruin of guarantee or any "liabity' that occur by people any other hardware on HP computers inventory installation

  makes no since to me.  the PC SHOULD be able to run the card. in fact his race he now once I was able to circumvent the blocking (temporarily) check markers, everyhting is fine tracks of card 3 times faster then old (that should be the case).

  But it's just this block as HP for some reason any installed on their bios/cards mothers is the question.

  Good news is I got it from amazon and I have about a month, until I return. which I think this time I'll make.  to see if something pops up in a month or something.

  It's the ONLY solution, it seems that HP has officially to deactivate start secure Windows 8

  but this isn't a computer of windows 8. and I guess even if install windows 8. the issue wouldn't disappear because given that its an older bios, there is no way to have a secure boot option to delete?

  HP you really need to get on the ball and give us a straight answer on this subject.  Is it ALL WAY to solve this problem? Can you not just do an older BIOS update to allow this? Or do you simply not want to worry about old PCs?

  anyway I think that it is wrong and very frustrating and to be honest. If this is the case when my pc otherwise MUST run on demand

  It's a PCI express 16 x slot card that is 3.0

  Here are the specifications of deetailed according to the guidelines of your page

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03273835

  the card SHOULD WORK fine.  I thought the GTX 780 was a little too much for the PC as he had more then a six pin port and needed a little more power, so at first I thought it was the question. so I returned it. and has now got this new card.

  However, the ASUS GTX 960 map requires the SAME power that the card GTX 550 it by default and the SAME SIX connector

  so it SHOULD work.

  and performance tests indicate that it FACT it's just stupid... bios that asks the question.

  I'm afraid to turn off the computer at the moment and try again to see if windows starts normally after you turn off the startup UEPI devvices because he cannot start properly...

  HP you are one of the largest suppliers of computers you know technology what are YOUR computers.  WHY cant you give us a direct awnser on this.

  ITS VERY frustrating

  and to be honest if I can't solve this problem, I am very hestient never buy another product HP if their spacifically computers have this new method of hardware locking.

  because I have the card now works on my pc, it runs great! 3 times as fast as it should! and yet, I know in the back of my mind, if I can't understand this bad likely issue just to send it back... less I have time.

  and for now, I did not have money to buy a new pc. This PC is JUST perfect for what I need for now another card then you want a little better...

  He shoudnt be as much hassle there?

  Thank you.

  Hello

  You need update the BIOS that is listed under Windows 8 to support the new graphics.   You must upgrade to Windows 8 or temporarily install Windows 8, you can install the update to the BIOS.  While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way.  8 BIOS version is your best chance to get the latest graphics cards to work.

  You can Windows 8 Enterprise 90 days trial.

  If you decide to install W8, then create external recovery HP Media and backup your data before doing anything.

  The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

• How to install Windows Vista Home Premium 64-bit?

  Hello! Can someone tell me how can I make Windows Vista Home Premium 32-bit to 64-bit?

  Here's my question: -.

  1. I bought a version of Windows Vista Edition retail family Premium, the package has only the 32-bit support (DVD). I found a few website say that the product key for the retail version of Windows is for 32-bit and 64-bit, as long as we use 32 - bit or 64 - bit on a single computer at a time. If I'm wrong, anyone could answer my question?

  2. now, I plan to move from 32 bit to 64 bit, my problem is that the version sold at retail of Windows that I purchased only contain 32-bit media:-

  (a) is there a way I could install the 64-bit Windows?

  (b) is it possible I could get 64-bit support?

  (c) could I use media in Windows Vista Home Premium 64-bit retail a friend to install on my computer? And after installation, I can activate Windows with my product key?

  Looking forward to the responses, thank you.

  Do you a clean install from 32 bit to 64 bit.

  http://www.Microsoft.com/windowsvista/1033/ordermedia/default.mspx

  Link above is how you get 64 bit DVD, if you have a retail license.

  You can use any Microsoft Vista 64-bit DVD and use your 32 bit key as you say it's Vista Retail

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon...

  Mick Murphy - Microsoft partner

• need an iso file to install windows for windows vista Home premium 32-bit

  I have a product key, but need Windows vista Home Premium (32 bit) ISO because I lost the part recovery partition

  Hello

  There is no Windows Vista downloads available from Microsoft.

  You can contact your computer manufacturer and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• How to get a windows Vista Home Premium 32-bit installation disc?

  My computer is an emachine T5086.  It has Windows Vista Home Premium and when loading drivers they stop loading at "windows32 drivers/crcdisk sys. I don't know what that means.

  Then, the computer restarts and asks me to install my windows installation disc for repairs.  F8 on reboot is not available as an option.  I don't have a repair option I turn on the computer and hold down the F8 key manually.  I don't have a windows disk or recovery disk and I can't to where I can find a restore either point.

  How to make a windows Vista Home Premium 32-bit installation disk?  I have my product key. Or where can I get one?

  Hello

  There are different methods to reinstall Vista.

  There is no Windows Vista downloads available from Microsoft.

  You can contact the manufacturer of your computer, eMachines and ask them to send you a set of recovery disks.

  They should do this for a small fee.

  http://www.eMachines.com/EC/en/us/content/home

  To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:

  You need to change the Boot order to make the DVD/CD drive 1st in the boot order:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.