Windows 7 installation 0x8007000d error code

Similar Questions

• The Windows 7 Installation failed, error code: 0 x 80070017

  I own a legal copy of DVD of Windows 7 64-bit. I'm trying to reinstall it on my computer, which, for the time being, has no operating system installed, but 13% of expanding windows files, I always get the following error message:

  Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0 x 80070017

  What is the problem, how can I fix it? Is my Windows 7 disc damaged?

  If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.

  If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.

  Disconnect all external devices except the keyboard and mouse before installing.

  If using a video card and the computer has integrated video use and remove the video card.

  Unplug the computer from the internet, if you have wireless disable.

  RAM (memory) - reduce the amount of RAM. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful. If you added new RAM make sure it is also compatible.

  Windows 7 installation disc does not

  Just a few troubleshooting steps to see if the drive is bad or if the DVD player is bad:

  If you have another DVD player available try to use this drive in your computer instead.

  If you have another computer available, try the disc of Windows 7 by using this computer and see if it can read the disc, or if the disc cannot be read and is bad.

  In addition, if you purchased the retail version of Windows 7 try to put in the other disk of type bit of the Windows 7 disc and see if it works properly.

  If you cannot start Windows 7 installation disc, your computer can boot from other bootable disks?

  How to replace Microsoft software

  http://support.Microsoft.com/default.aspx/KB/326246

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 8 upgrade retains fault make sure all files required for installation are available, and restart the installation. Error code: 0x8007025D

  Hello

  Like so many others, I am fighting to get 8 upgraded windows. I have tried all the methods mentioned upgrade

  on the forums without success. I have greated iso dvd, tried to use the USB and the installation of office.

  Error: Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]

  The error logs:

  Setupact.txt

  2012-11-04 01:02:27, MoveOldOSFiles IBS Info [0x0600a6]: got through [C:\Windows\] to [C:\Windows.old\Windows\]
  2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEArchiveOldWindowsFoldersDoneCheckpoint") current...
  2012-11-04 01:02:27, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEArchiveOldWindowsFoldersDoneCheckpoint' have been correctly set up.
  2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEImageApplyReadyCheckpoint") current...
  2012-11-04 01:02:28, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEImageApplyReadyCheckpoint' have been correctly set up.
  2012-11-04 01:02:28, info [0x06009e] IBS DeployWIMImage:Calling IDepWIMImageResolved::Apply...
  2012-11-04 01:02:28, info [0x0606cc] IBS calling WIMApplyImage (flags = 0 x 180)...
  2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:37, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the file [C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys] RULE is [605]
  2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
  2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]
  2012-11-04 01:08:42, PublishCriticalError IBSLIB Info: publish error message critical [Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]
  2012-11-04 01:08:42, info [0x0a013d] UI accept Cancel. Leaving the Page's progress.
  2012-11-04 01:08:42, info UI entering Page Cancel.

  Setuperr.txt

  2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
  2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]

  Any help will be greatly appreciated.

  Thank you for all the answers. Finally managed to get installed it. Download 4 times. Whenever he stopped at different percentages, so I expected the download is corrupt. Finally in the format of my other readers, installed windows 7 on it and then downloaded windows 8. Finally, it worked. Had to be something with my player.

  Thanks again.

• Updates Windows installs, has error code 66 & 80070643

  Error code 66 & 80070643 appear when you try to install upgrades to windows 7. Happened since then went from broadband to the Wi - Fi

  * original title - computer will not install the updates of windows. Gives the error code 66A & 80070643. Previously no problem on broadband but since I use wireless connections problem is constant. No windows at all.* payments

  You can see this discussion earlier, linked: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/f1dd866f-85b7-4ae6-bc32-1c488c19742a ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update KB948465 8024200d error code failed.

  Windows Update KB948465 8024200d error code failed.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  [0 x Error 80070002; 0x8007000D; 0 x 80073712; 0x800B0100; & 0x8024200D]
  http://support.Microsoft.com/kb/947366

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Satellite A500 PSAM3E - Windows 7 upgrade failed - error code: 0 x 80070570

  I install the win7 update on my Satellite A500 PSAM3E and when I arrive in windows files is growing - it stop and a pop-up message:

  * (Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0 x 80070570). *

  Stop the installation and I could do nothing, I restarted the upgrade but still the same.

  I just got my win7 DVD from Toshiba, the corrupt DVD upgrade or other issues, before the installation, a message appears that I need to uninstall install ATI Catalyst and ATI catalyst Control Panel.

  Need help from the expert who have already done the upgrade.

  Hello

  > before installation, a message appears that I need to uninstall install ATI Catalyst and ATI catalyst Control Panel.
  And why you didn t do?
  Maybe you run an earlier version of the display drivers and so you should uninstall them before you start the upgrade.
  Check it!

  After the upgrade, you can install the latest version of the Toshiba page display driver.

  By the way: Here you can find an update step by step:
  http://APS2.toshiba-tro.de/KB0/TSB9902P60000R01.htm

• MSE uninstalled by an automatic update of Windows XP SP3. Error code 0 x 80070642.

  MSE uninstalled by an automatic update of Windows XP SP3.  Error code 0 x 80070642.
  It will not reinstall.  Tried to restore the operating system to an earlier date.
  Have tried to repair the original operating system with the OS installation CD.
  Spin without MSE and tasked a free anti-virus software in the meantime.

  For problems with Microsoft Security Essentials, you can submit to submit a support case online.

  Note: You may need to remove avast completely before attempting to reinstall MSE.

• Windows 7 Update 643 error code

  I'm unable to install updates for windows 7.  getting error code 643.  Help?

  Hello Vidaneufeld,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  Windows Update error 80070643 can happen for several reasons. The most common cause is a problem with the .NET Framework is installed on the computer. You may also encounter this error during the installation of the updates for

  Microsoft Office 2003.

  This problem may occur if the MSI software update registration is damaged, or if the installation of .NET Framework on the computer is damaged.

  I suggest you run the Windows update Troubleshooter and check.
  Reference:
  Open the Windows Update troubleshooting tool
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  He makes sure your computer is connected to the Internet and checks to see if your network card and Windows Update services are running properly.

  Please also run 'repair of Microsoft .NET Framework tool' and check the issue.
  Reference:
  Microsoft .NET Framework repair tool
  https://www.Microsoft.com/en-US/Download/details.aspx?ID=30135

  This tool detects and tries to repair some problems frequently with Microsoft .NET Framework Setup or updates of the Microsoft .NET Framework.

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• 0x8007000d error code

  IM using compaq presario CQ42 with windows 7 starter. Im trying to install windows 10, but it gave the error 0x8007000D code - 0 x 90002, can anyone tell my what should I do? Ive tried to find the answer, but this is for windows 8 and again, this does not solve my problem

  consider the following solution:

  0x8007000D error code when you try to activate a Windows server 2008 or Windows 7 computer using any type of product key.
  http://support.Microsoft.com/kb/2230957/

• When you install Windows 7, receive the error Code 0 x 80070490

  At the beginning of the installation of Windows 7, I get this error message.

  * original title - Error Code 0 x 80070490 Windows Setup can't find a place to store temporary installation files. Intall Windows, make sure that a partition on your startup disk has at least 686 megabytes of free space

  Try these suggestions:

  Error 0 x 80070005 occurs if the upgrade doesn't have permission to the folder writecertain. Try the following steps:

  Reset permissions
  ============

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads

  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.

  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:

  off @echo

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f

  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f

  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause

  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".
  8. you will see a window of type BACK treatment.

  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  If the same thing happens, move to the next step.

  Run the upgrade by using the built-in Administrator

  ================================

  1. click the button start-> all programs-> Accessories.

  2. right click on command prompt and select "run as Administrator".

  3. click on continue when user account control window appears.

  4 copy the following command and press ENTER:

  NET user administrator / Active: Yes

  5 restart the computer and then log on the computer of this administrator account.

  6. run the upgrade to windows 7.

  Error code 0 x 80070005 usually indicates that you don't have enough privileges or the operation is blocked. I know, some programs (Boot Camp on a Mac PC, etc.) is not compatible with Windows 7, if you have installed these programs on the computer, you may not be able to perform the upgrade.  You should uninstall these programs before upgrading. In addition, such a question may be related to UAC, I recommend you turn off UAC in Windows Vista, if you have installed security software, try uninstalling the security application as well.

  BTW, for your references, I found similar questions:

  Windows could not create a required installation folder. Error code: 0x80070005
  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/d04e9cf3-3eae-4A1F-a9f8-e2c5ed88d183/

  "Cannot create file" error when you try to install Windows 7
  http://social.technet.Microsoft.com/forums/en/w7itproinstall/thread/3621e8cf-B2CE-479b-BEAC-08acc435a856

  Error 0 x 80070005 when upgrading to windows 7 from vista
  http://social.technet.Microsoft.com/forums/en-us/w7itproinstall/thread/08986904-c822-4801-95a5-55ddd5aadcea/

  See also:

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/cb679e27-f2e6-4CD5-b708-a4992cec5a9d

  CREDIT: Dale Qiao Microsoft, host and cdobbs releasing It Easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• When I try to download the update of windows I get an error code every time: 802440F.

  When I try to download the update of windows I get an error code every time: 802440F. Can you please help me solve this problem?

  @ Evanston only!...

  You see the effects of a hijackware infection! If you had used the computer longer, I might recommend trying to detect & remove infections. But it would probably take a week or two and I'm sure you have better to do with your time right now so I would recommend the following (which shouldn't take any more than two hours of uninterrupted time).

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows. Please note that a repair installation (upgrade AKA on-site) will NOT fix it!

  HOW to do a clean install of Win7: see "using the custom installation and formatting the hard drive option" (or "reinstall it Windows 7") http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows-7 article

  NOTE: If your computer came with a set of disks, there is a hidden partition restore (not to be confused with the restoration of the system) you would use to do the clean install (AKA a "destructive recovery").

  After the new installation, you will have the equivalent of a "new computer" in order to take care of EVERYTHING on the next page before connecting the machine to the internet or one local network (i.e. other computers) AND BEFORE to plug in a flash, SD card, or any other external drive to the computer otherwise:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  VERY IMPORTANT! -Online free trial Norton will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free AND download/run the removal tool again Norton before installing updates AND BEFORE installing your new application antivirus (for example, Avast5 or Microsoft Security Essentials, free).

  Tip: Do not install Spybot again; It's really overkill in Win7 my humble OPINION, especially if you are installing Microsoft Security Essentials.

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx
  http://www.us-cert.gov/CAs/tips/ST05-007.html

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need additional assistance with the clean install, please start a new thread in this forum: http://social.answers.microsoft.com/Forums/en-US/w7repair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Wish I had better news for you.  Good luck & achieve before Thanksgiving 2010!

• Not enough disk space to complete this installation. Error code: U44M1P31

  Windows 7 laptop. Drive C (main road), drive E (Tools), G Drive (external drive). Suite Adobe CS5 for web design. Updates for adobe want to go in the tools folder in drive E. Error Message for all of the updates is not enough disk space. Of course, there is not enough disk space because it is a small partition of drive C drive. I don't know why or how the default for adobe updates is to drive E. I don't know where the properties are to change that. Adobe says it's a matter of windows. I can't find a place that asks me where I want to save the updates in all adobe programs. I have my adobe programs on the G drive which is an external hard drive. I would like for the updates go to the G drive whose program is. Can someone help me understand why adobe wants to download updates of files in a folder he knows that he can not download on due to lack of space? Can someone help me solve this issue? Please and thank you!
  This is the error code I get "not enough disk space to complete this installation. "Error code: U44M1P31.

  I suspect that Win7 libraries (Documents) are quite large. Libraries of redirection to your external drive, the will of placeholder still apear under users but the actual data will be on your outside.

  Then uninstall your outside Adobe and reinstall to C

  Updates for programs or those windows update are installed in the folder temp of victory, there the update, then runs and installs in the records required of this program. Unless you fiddled with the settings of your victory and redirected the temp folder.

  I think your problem lies in the installation of Adobe on an external drive and the program Adobe (or at least its update module) is confused by the present.

  Using an external drive, especially the usb drive, to a use for which it was not designed is a main issue.

  Maybe ask Adobe support if they supported the installation of their program on an external, probably the usb drive

• PC needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I

  Upgrading to windows 7 8. PC worked fine for 3 months. The last time I turned on the computer would not start.

  After several attempts to "Prepare the automatic repair" screen appeared but never advanced.  The screen with the windows box 4 logo
  with circle of points running just above to prepare the automatic repair, waited for several hours but never changed.
  {1}-j' inserted my disk to repair Windows 8 {(set Bios pour démarrer sur le DVD).}  Note in this step, that I IS NOT select Boot from cd\dvd.
  That's when the error message appears: pc needs to be fixed: File:\windows\system32\winload.exe error code: Oxc000000I
  and you will need to use recovery tools.
  Three options are given: 1. Enter to try agai, 2; F8 for boot options, 2: F9 to use different operating system.
  Enter in any of the three choices just recycled the screen containing the same information.
  {2} - Windows 8 repair disk inserted. This time, I SELECTED Boot from DVD
  PC starts loading the cd [dvd, 4 windows box logo appears on the screen
  Bed cd\dvd for about 3-4 minutes.  Circle of rotation points appear on the screen below the logo box 4.
  at this point the drive HARD blinking led, system in this State remains. I never get to see service options. I waited for hours at a time.
  Produce the same results as step 2 above when I try to use the windows 8 installation disc.
  I'd appreciate any help as to how I can get to the repair, the troubleshhot or advanced options which are supposd to be available.

  Tony Hey,

  Regrettable that the problem exists.

  Seems like a problem in the BIOS settings, it would be good to check with the manufacturer of the PC.

  They might have more insight on this.

• Converter Standalone Agent installation failed, error code: 1601

  Hi all

  I downloaded the VMware converter tryware version, to see if we can use this tool to create virtual machines from existing industrial PC.

  We intend to make a test remote backup to a XP to a laptop machine (to keep mobile in an industrial environment)

  I installed you VMware converter and disabled the firewall on both machines.

  I also disabled the network drives that are shared on the remote computer.

  When data powered the remote computer has been entered (ip address, username, PW, BONE family) and press us Next, the pop-up appears to deploy the Agent of Standalone converter.

  If you press 'Yes' to continue, after a minute or two the following message appears:

  -Converter Standalone Agent installation failed, error code: 1601 -.

  Can someone tell me what this error code means and how I can fix this error?

  Any help will be appreciated cincerely!

  Sincere friendships and thank you in advance,

  Marcel Lefèvre

  the Netherlands

  Can someone tell me what this error code means and how I can fix this error?

  Windows Installer error 1601 = The Windows Installer service could not be accessed. Contact your support team to verify that the Windows Installer service is properly registered.

  Additionally, make sure that the appropriate ports are open to allow the Windows agent to settle.

  Alternatively, you can manually install the converter on the remote system agent... and then try to restart the conversion (then there is no need to install anything).

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.